As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When freeing obsolete previous roots, check prev_roots as intended, not
the current root.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Fixes: 527d5cd7ee ("KVM: x86/mmu: Zap only obsolete roots if a root shadow page is zapped")
Message-Id: <20220607005905.2933378-1-shaoqin.huang@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.
However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.
Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
A livepatch transition may stall indefinitely when a kvm vCPU is heavily
loaded. To the host, the vCPU task is a user thread which is spending a
very long time in the ioctl(KVM_RUN) syscall. During livepatch
transition, set_notify_signal() will be called on such tasks to
interrupt the syscall so that the task can be transitioned. This
interrupts guest execution, but when xfer_to_guest_mode_work() sees that
TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an
exit to user mode is unnecessary, and guest execution is resumed without
transitioning the task for the livepatch.
This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal()
is expected to break tasks out of interruptible kernel loops and cause
them to return to userspace. Change xfer_to_guest_mode_work() to handle
TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run
loop that an exit to userpsace is needed. Any pending task_work will be
run when get_signal() is called from exit_to_user_mode_loop(), so there
is no longer any need to run task work from xfer_to_guest_mode_work().
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the initial attempt at trunking detection using the krb5i auth flavor
fails with -EACCES, -NFS4ERR_CLID_INUSE, or -NFS4ERR_WRONGSEC, then the
NFS client tries again using auth_sys, cloning the rpc_clnt in the
process. If this second attempt at trunking detection succeeds, then
the resulting nfs_client->cl_rpcclient winds up having cl_max_connect=0
and subsequent attempts to add additional transport connections to the
rpc_clnt will fail with a message similar to the following being logged:
[502044.312640] SUNRPC: reached max allowed number (0) did not add
transport to server: 192.168.122.3
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc48e0abee ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
On each vcpu load, we set the KVM_ARM64_HOST_SME_ENABLED
flag if SME is enabled for EL0 on the host. This is used to
restore the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SME for userspace. As it turns
out, this is due to the SME code being more or less copied from
SVE, and inheriting the same shortcomings.
We never saw the issue because nothing uses SME, and the amount
of testing is probably still pretty low.
Fixes: 861262ab86 ("KVM: arm64: Handle SME host state when running guests")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-3-maz@kernel.org
On each vcpu load, we set the KVM_ARM64_HOST_SVE_ENABLED
flag if SVE is enabled for EL0 on the host. This is used to restore
the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SVE for userspace.
We probably never saw the issue because no VMM uses SVE, but
that's still pretty bad. Unconditionally clearing the flag
on vcpu load addresses the issue.
Fixes: 8383741ab2 ("KVM: arm64: Get rid of host SVE tracking/saving")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-2-maz@kernel.org
During device remove care needs to be taken that no work is pending
before it removes the underlying DRM bridge etc, but this can be done on
the specific work rather than waiting for the flush of the system-wide
workqueue.
Fixes: bc6fa8676e ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601233818.1877963-1-bjorn.andersson@linaro.org
Unbinding the driver or removing the parent device at the same time
as using the OCC active sysfs file can cause the driver to unregister
the hwmon device twice. Prevent this by locking the occ mutex in the
shutdown function.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606185455.21126-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
'ti,n-factor' is a scalar type, so 'items' should not be used as that is
for arrays/matrix.
A pending meta-schema change will catch future cases.
Fixes: bd90c5b939 ("dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220606212223.1360395-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: e67f6037ae ("drm/meson: split out encoder from meson_dw_hdmi")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-3-linmq006@gmail.com
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 318ba02cd8 ("drm/meson: encoder_cvbs: switch to bridge with ATTACH_NO_CONNECTOR")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-2-linmq006@gmail.com
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKfPyMACgkQJNaLcl1U
h9DWlQf+P5+L2OUpuLLNahRKfDlT/RScEo5+wjJ8HYEIo/3+/KI8YubrlPOHByeI
diVIfQhYw/bLW0xZEHxRhDPDzT/00ULjUlbYJ4YgyPy5dREOfO8IDDc1BwImTJqp
67UfEP6eWO8f+IpUJKV7eSng1FvV1vQsMswP1QG7K8wuZRMWzNkrpZIrQ/6vEuUd
BFiPMEiGXM/YZIBc055kqrPxD5ZyFlocg2EcHaS09jir006YlVk13DflUDVoaxwg
QGQUVhC9GrR72wB+8oRtpuzOiujvaoHlzAtA8iFp8yKY1Zsl0O2vrgLQwX1qhAcZ
oLApw1fdqKayMWhpwf2L8Hr6SGgrsA==
=zPdk
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more
including path.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to get rid of the function SetHwReg8188EU() remove the
HW_VAR_SLOT_TIME case from that function and move the functionality
into a static function in rtw_wlan_util.c.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220606064055.12565-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix this build error noticed by the kernel test robot:
drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.10+
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix refcount leak in some error paths.
Fixes: 0f83f9296d ("ASoC: mediatek: Add machine driver for ALC5650 codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603124243.31358-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_simple_clean_reference() returns zero unconditionally. Letting it
return void instead makes it easier to see in the caller that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220605153537.26591-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
broadwell_disable_jack() returns zero unconditionally. Letting it
return void instead makes it easier to see in the callers that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220605153904.26921-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König <uwe@kleine-koenig.org>:
From: Uwe Kleine-König <uwe@kleine-koenig.org>
Hello,
I intended to send this after -rc1 was cut, but found a few spare
minutes to prepare this series. All four patches were sent already
before based on v5.18, but there were some conflicting changes added in
the merge window. This series contains the four patches on top of
current linus/master and so bases on a tree including the conflicting
changes. Expecting no more sound changes in this merge window, this
should apply cleanly on top of -rc1.
Best regards
Uwe
Uwe Kleine-König (4):
ASoC: ak4642: Drop no-op remove function
ASoC: da7219: Drop no-op remove function
ASoC: lm49453: Drop no-op remove function
ASoC: da732x: Drop no-op remove function
sound/soc/codecs/ak4613.c | 6 ------
sound/soc/codecs/da7219.c | 6 ------
sound/soc/codecs/da732x.c | 6 ------
sound/soc/codecs/lm49453.c | 6 ------
4 files changed, 24 deletions(-)
base-commit: 50fd82b3a9
--
2.36.1
Merge series from Hui Wang <hui.wang@canonical.com>:
Taking your advice and try to enable internal PLL to get a more
accurate sample rate. And I also changed the fsl-asoc-card.c to support
the nau8822 codec, now the sound quality is pretty good on my imx6sx
EVB.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This can probably wait for the next merge window, I found a number of
cppcheck warnings that I didn't see in my last checks. The irony is
that the only really important issue found by cppcheck was on one of
my previous DPCM changes (submitted separately as a fix).
Merge series from Sameer Pujar <spujar@nvidia.com>:
This series adds support for Output Prcoessing Module (OPE) module on
Tegra210 and later generations of SoCs. OPE is a client of AHUB and
it has sub blocks of PEQ (Parametric Equalizer) and MBDRC (Multi Band
Dynamic Range Compressor) for data processing.
An ASoC component is registered for OPE, which includes PEQ and MBDRC
functions as well. This can be plugged in audio path using ALSA mixer
controls. The series adds necessary binding documentaion, driver and
DT binding patches to enable OPE module on Jetson platforms.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>
From there on is a range of boards appended. All of them follow the same:
This series focuses on populating boards/ subdirectory with supported
configurations by the avs-driver. Note: it is independent of recently
provided "Driver code and PCM operations" series [1], that is, code
found here should not collide with it.
Series starts with a small change that adds a helper to sound pcm
header, allowing for retrieving string naming a direction without the
need of substream pointer. Said helper is used by codec driver code that
follows it but I believe it's generic and helpful enough that it can be
called an independent addition to the sound core.
Code for generic HD-Audio codec driver follows. It is a ASoC wrapper for
existing HD-Audio codec code found in sound/pci/hda/. There is basically
no custom logic involved up to the point that driver follows
HDA_DEV_LEGACY convention, rather than the HDA_DEV_ASOC one. Commit
message for the given patch iterates on this and explains crucial parts
of the implementation.
From there on is a range of boards appended. All of them follow the same
scheme:
- define avs_create_dai_link() so DAI-LINKs can be created dynamically,
based on the link_mask (I2S) or the number of entries in the
->pcm_list_head list (HDA)
- define avs_create_dapm_routes() so DAPM routes can be created
dynamically, same rules as above apply
- define probe() function that creates new ASoC card, assign all
required operations and resources along with calling the two above
Changes in v2:
- 'link_mask' usage replaced with 'i2s_link_mask' as requested by
Pierre
- 'ssp_test' board renamed to 'i2s_test' to match naming convention used
for other i2s machine boards
- enriched commit message and Kconfig for the 'HD-Audio codec driver'
patch as requested by Kai
[1]: https://lore.kernel.org/all/20220426172346.3508411-1-cezary.rojewski@intel.com/
Amadeusz Sławiński (1):
ASoC: Intel: avs: Add max98373 machine board
Cezary Rojewski (13):
ALSA: Add snd_pcm_direction_name() helper
ASoC: codecs: Add HD-Audio codec driver
ASoC: Intel: avs: Add HDAudio machine board
ASoC: Intel: avs: Add DMIC machine board
ASoC: Intel: avs: Add I2S-test machine board
ASoC: Intel: avs: Add rt274 machine board
ASoC: Intel: avs: Add rt286 machine board
ASoC: Intel: avs: Add rt298 machine board
ASoC: Intel: avs: Add rt5682 machine board
ASoC: Intel: avs: Add nau8825 machine board
ASoC: Intel: avs: Add ssm4567 machine board
ASoC: Intel: avs: Add max98357a machine board
ASoC: Intel: avs: Add da7219 machine board
include/sound/pcm.h | 19 +-
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/hda-dai.c | 102 +++++++
sound/soc/codecs/hda.c | 395 +++++++++++++++++++++++++
sound/soc/codecs/hda.h | 19 ++
sound/soc/intel/Kconfig | 3 +
sound/soc/intel/avs/Makefile | 3 +
sound/soc/intel/avs/boards/Kconfig | 121 ++++++++
sound/soc/intel/avs/boards/Makefile | 27 ++
sound/soc/intel/avs/boards/da7219.c | 282 ++++++++++++++++++
sound/soc/intel/avs/boards/dmic.c | 93 ++++++
sound/soc/intel/avs/boards/hdaudio.c | 294 ++++++++++++++++++
sound/soc/intel/avs/boards/i2s_test.c | 180 +++++++++++
sound/soc/intel/avs/boards/max98357a.c | 154 ++++++++++
sound/soc/intel/avs/boards/max98373.c | 239 +++++++++++++++
sound/soc/intel/avs/boards/nau8825.c | 353 ++++++++++++++++++++++
sound/soc/intel/avs/boards/rt274.c | 310 +++++++++++++++++++
sound/soc/intel/avs/boards/rt286.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt298.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt5682.c | 340 +++++++++++++++++++++
sound/soc/intel/avs/boards/ssm4567.c | 271 +++++++++++++++++
22 files changed, 3775 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/codecs/hda-dai.c
create mode 100644 sound/soc/codecs/hda.c
create mode 100644 sound/soc/codecs/hda.h
create mode 100644 sound/soc/intel/avs/boards/Kconfig
create mode 100644 sound/soc/intel/avs/boards/Makefile
create mode 100644 sound/soc/intel/avs/boards/da7219.c
create mode 100644 sound/soc/intel/avs/boards/dmic.c
create mode 100644 sound/soc/intel/avs/boards/hdaudio.c
create mode 100644 sound/soc/intel/avs/boards/i2s_test.c
create mode 100644 sound/soc/intel/avs/boards/max98357a.c
create mode 100644 sound/soc/intel/avs/boards/max98373.c
create mode 100644 sound/soc/intel/avs/boards/nau8825.c
create mode 100644 sound/soc/intel/avs/boards/rt274.c
create mode 100644 sound/soc/intel/avs/boards/rt286.c
create mode 100644 sound/soc/intel/avs/boards/rt298.c
create mode 100644 sound/soc/intel/avs/boards/rt5682.c
create mode 100644 sound/soc/intel/avs/boards/ssm4567.c
--
2.25.1
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small updates to add initial tables for MeteorLake, SoundWire machine
driver support for tests without HDMI and RT1019 for consistency on
Chromebooks.
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
The CS35L41 Amplifier contains a DSP, capable of running firmware.
The firmware can run algorithms such as Speaker Protection, to ensure
that playback at high gains do not harm the speakers. This exports some
interfaces to allow more use of this DSP by the HDA version of the driver.
Menglong Dong says:
====================
reorganize the code of the enum skb_drop_reason
The code of skb_drop_reason is a little wild, let's reorganize them.
Three things and three patches:
1) Move the enum 'skb_drop_reason' and related function to the standalone
header 'dropreason.h', as Jakub Kicinski suggested, as the skb drop
reasons are getting more and more.
2) use auto-generation to generate the source file that convert enum
skb_drop_reason to string.
3) make the comment of skb drop reasons kernel-doc style.
Changes since v3:
3/3: remove some useless comment (Jakub Kicinski)
Changes since v2:
2/3: - add new line in the end of .gitignore
- fix awk warning by make '\;' to ';', as ';' is not need to be
escaped
- export 'drop_reasons' in skbuff.c
Changes since v1:
1/3: move dropreason.h from include/linux/ to include/net/ (Jakub Kicinski)
2/3: generate source file instead of header file for drop reasons string
array (Jakub Kicinski)
3/3: use inline comment (Jakub Kicinski)
====================
Link: https://lore.kernel.org/r/20220606022436.331005-1-imagedong@tencent.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To make the code clear, reformat the comment in dropreason.h to k-doc
style.
Now, the comment can pass the check of kernel-doc without warnning:
$ ./scripts/kernel-doc -v -none include/linux/dropreason.h
include/linux/dropreason.h:7: info: Scanning doc for enum skb_drop_reason
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is annoying to add new skb drop reasons to 'enum skb_drop_reason'
and TRACE_SKB_DROP_REASON in trace/event/skb.h, and it's easy to forget
to add the new reasons we added to TRACE_SKB_DROP_REASON.
TRACE_SKB_DROP_REASON is used to convert drop reason of type number
to string. For now, the string we passed to user space is exactly the
same as the name in 'enum skb_drop_reason' with a 'SKB_DROP_REASON_'
prefix. Therefore, we can use 'auto-generation' to generate these
drop reasons to string at build time.
The new source 'dropreason_str.c' will be auto generated during build
time, which contains the string array
'const char * const drop_reasons[]'.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As the skb drop reasons are getting more and more, move the enum
'skb_drop_reason' and related function to the standalone header
'dropreason.h', as Jakub Kicinski suggested.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full. Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.
Fixes: 7d267278a9 ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a UMR fails, the UMR QP state changes to an error state. Therefore,
all the further UMR operations will fail too.
Add a recovery flow to the UMR QP, and repost the flushed WQEs.
Link: https://lore.kernel.org/r/6cc24816cca049bd8541317f5e41d3ac659445d3.1652588303.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the managed API is used, there is no need to explicitly call
pci_free_irq_vectors().
This looks to be a left-over from the commit in the Fixes tag. Only the
.remove() function had been updated.
So remove this unused function call and update goto label accordingly.
Fixes: 8accc46775 ("stmmac: intel: use managed PCI function on probe and resume")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The production Quartz64 Model B has compatibility issues when using
rgmii-id mode. Switch to rgmii mode and use the SoC's delays to ensure
full compatibility.
Reported-by: Frank Mankel <frank.mankel@gmail.com>
Fixes: dcc8c66bef ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Frank Mankel <frank.mankel@gmail.com>
Link: https://lore.kernel.org/r/20220606163023.3677147-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>