Commit graph

1,188,286 commits

Author SHA1 Message Date
Juergen Gross
d6aca3504c xen/grant-dma-ops: Add option to restrict memory access under Xen
Introduce Xen grant DMA-mapping layer which contains special DMA-mapping
routines for providing grant references as DMA addresses to be used by
frontends (e.g. virtio) in Xen guests.

Add the needed functionality by providing a special set of DMA ops
handling the needed grant operations for the I/O pages.

The subsequent commit will introduce the use case for xen-grant DMA ops
layer to enable using virtio devices in Xen guests in a safe manner.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-4-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06 08:54:52 +02:00
Juergen Gross
02a9e681a3 xen/grants: support allocating consecutive grants
For support of virtio via grant mappings in rare cases larger mappings
using consecutive grants are needed. Support those by adding a bitmap
of free grants.

As consecutive grants will be needed only in very rare cases (e.g. when
configuring a virtio device with a multi-page ring), optimize for the
normal case of non-consecutive allocations.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-3-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06 08:54:35 +02:00
Oleksandr Tyshchenko
9bf22421dc arm/xen: Introduce xen_setup_dma_ops()
This patch introduces new helper and places it in new header.
The helper's purpose is to assign any Xen specific DMA ops in
a single place. For now, we deal with xen-swiotlb DMA ops only.
The one of the subsequent commits in current series will add
xen-grant DMA ops case.

Also re-use the xen_swiotlb_detect() check on Arm32.

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
[For arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1654197833-25362-2-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06 08:54:33 +02:00
Yang Li
617df304f3 opp: Fix some kernel-doc comments
Make @freq to @bw in dev_pm_opp_find_bw_ceil() and
dev_pm_opp_find_bw_floor() kernel-doc comment to
remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.

drivers/opp/core.c:753: warning: Function parameter or member 'bw' not
described in 'dev_pm_opp_find_bw_ceil'
drivers/opp/core.c:753: warning: Excess function parameter 'freq'
description in 'dev_pm_opp_find_bw_ceil'
drivers/opp/core.c:812: warning: Function parameter or member 'bw' not
described in 'dev_pm_opp_find_bw_floor'
drivers/opp/core.c:812: warning: Excess function parameter 'freq'
description in 'dev_pm_opp_find_bw_floor'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06 11:58:51 +05:30
Tang Bin
4ea9496cbc opp: Fix error check in dev_pm_opp_attach_genpd()
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.

Fixes: 6319aee10e ("opp: Attach genpds to devices from within OPP core")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
[ Viresh: Replace ENODATA with ENODEV ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06 11:58:51 +05:30
Juergen Gross
3f9dfbebdc virtio: replace arch_has_restricted_virtio_memory_access()
Instead of using arch_has_restricted_virtio_memory_access() together
with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those
with platform_has() and a new platform feature
PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov <bp@suse.de>
2022-06-06 08:22:01 +02:00
Larry Finger
96f0a54e8e staging: r8188eu: Fix warning of array overflow in ioctl_linux.c
Building with -Warray-bounds results in the following warning plus others
related to the same problem:

CC [M]  drivers/staging/r8188eu/os_dep/ioctl_linux.o
In function ‘wpa_set_encryption’,
    inlined from ‘rtw_wx_set_enc_ext’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:1868:9:
drivers/staging/r8188eu/os_dep/ioctl_linux.c:412:41: warning: array subscript ‘struct ndis_802_11_wep[0]’ is partly outside array bounds of ‘void[25]’ [-Warray-bounds]
  412 |                         pwep->KeyLength = wep_key_len;
      |                         ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
In file included from drivers/staging/r8188eu/os_dep/../include/osdep_service.h:19,
                 from drivers/staging/r8188eu/os_dep/ioctl_linux.c:4:
In function ‘kmalloc’,
    inlined from ‘kzalloc’ at ./include/linux/slab.h:733:9,
    inlined from ‘wpa_set_encryption’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:408:11,
    inlined from ‘rtw_wx_set_enc_ext’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:1868:9:
./include/linux/slab.h:605:16: note: object of size [17, 25] allocated by ‘__kmalloc’
  605 |         return __kmalloc(size, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/slab.h:600:24: note: object of size [17, 25] allocated by ‘kmem_cache_alloc_trace’
  600 |                 return kmem_cache_alloc_trace(
      |                        ^~~~~~~~~~~~~~~~~~~~~~~
  601 |                                 kmalloc_caches[kmalloc_type(flags)][index],
      |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  602 |                                 flags, size);
      |                                 ~~~~~~~~~~~~

Although it is unlikely that anyone is still using WEP encryption, the
size of the allocation needs to be increased just in case.

Fixes commit 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")

Fixes: 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220531013103.2175-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:10:14 +02:00
Phillip Potter
5b7419ae1d staging: r8188eu: fix rtw_alloc_hwxmits error detection for now
In _rtw_init_xmit_priv, we use the res variable to store the error
return from the newly converted rtw_alloc_hwxmits function. Sadly, the
calling function interprets res using _SUCCESS and _FAIL still, meaning
we change the semantics of the variable, even in the success case.

This leads to the following on boot:
r8188eu 1-2:1.0: _rtw_init_xmit_priv failed

In the long term, we should reverse these semantics, but for now, this
fixes the driver. Also, inside rtw_alloc_hwxmits remove the if blocks,
as HWXMIT_ENTRY is always 4.

Fixes: f94b47c6bd ("staging: r8188eu: add check for kzalloc")
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220521204741.921-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:09:21 +02:00
Martin Kaiser
3e763d3dc6 staging: r8188eu: use u8, u16 in issue_action_BA prototype
Use u8 and u16 in the issue_action_BA prototype. The code expects these
parameters to be exactly 8 and 16 bits wide.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:36 +02:00
Martin Kaiser
979315cced staging: r8188eu: remove the pframe variable
Remove the pframe variable, it is no longer used for populating fields of
the outgoing frame.

pmgntframe->buf_addr is already a u8 *, we can drop the (u8 *) cast.

Increment the u8 *pmgntframe->buf_addr by TXDESC_OFFSET before we cast
it to struct ieee80211_mgmt *.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:36 +02:00
Martin Kaiser
d8f2cff632 staging: r8188eu: calculate the delba length
Use offsetofend to calculate the length of the delba message.

We are now calculating all message lengths based on the offset of their
last field. All intermediate updates of pattrib->pktlen can be removed.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
3d7deed4ec staging: r8188eu: clarify the contents of the delba params
The delba parameters field contains an initiator/receiver flag and the
tid. The caller of issue_action_BA passes these components in the status
parameter.

Extract the two components from status and use u16_encode_bits to copy
them into the parameters field. This should clarify what's going on and
should make it easier to replace the status parameter in the future.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
9120436aa9 staging: r8188eu: use mgmt to set delba params
Use the mgmt struct to set the delba parameters. Use the exact same value
for the parameters as the current code.

Remove a dead increment of pframe, we don't use pframe for the delba
message any more.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
c5727d76ca staging: r8188eu: use mgmt to set the delba reason code
Use the mgmt struct to set the delba reason code.

Replace the numeric value with a define and remove the temporary variable.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
c67eea0c34 staging: r8188eu: calculate the addba response length
An addba response always ends with the timeout field. The length of the
addba response is the offset of the end of the timeout field in the struct
ieee80211_mgmt that defines the message.

Use offsetofend to calculate this offset and drop the intermediate pktlen
increments as we add addba response components.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
8836faf719 staging: r8188eu: use ieee80211 to set addba resp capabilities
Use the mgmt structure and defines from ieee80211.h to set the
capabilities field of an addba response.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
140529aec4 staging: r8188eu: use mgmt to set the addba resp timeout
Use the mgmt struct to set the addba response timeout. Copy the timeout
from the saved addba request. The timeout field is already le16, we don't
have to convert the endianness.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
e2643fd46c staging: r8188eu: use mgmt to set the addba resp status
Use the mgmt struct to set the addba response status.

The caller passes the status code in host endianness, we have to convert
it to little endian.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Martin Kaiser
0e01f8931c staging: r8188eu: use mgmt to set resp dialog token
Use the mgmt structure to set the dialog token of an addba response.

Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220602193726.280922-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:35 +02:00
Jared Kangas
80c968a04a staging: greybus: audio: fix loop cursor use after iteration
gbaudio_dapm_free_controls() iterates over widgets using
list_for_each_entry_safe(), which leaves the loop cursor pointing to a
meaningless structure if it completes a traversal of the list. The
cursor was set to NULL at the end of the loop body, but would be
overwritten by the final loop cursor update.

Because of this behavior, the widget could be non-null after the loop
even if the widget wasn't found, and the cleanup logic would treat the
pointer as a valid widget to free.

To fix this, introduce a temporary variable to act as the loop cursor
and copy it to a variable that can be accessed after the loop finishes.

This was detected with the help of Coccinelle.

Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
Link: https://lore.kernel.org/r/20220605231806.720085-1-kangas.jd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:08:03 +02:00
Haowen Bai
7905346955 staging: r8188eu: Drop redundant memset overwritten by memcpy
The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy. So we drop redundant memset.

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1654084164-10869-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:06:36 +02:00
Juergen Gross
2130a790ca kernel: add platform_has() infrastructure
Add a simple infrastructure for setting, resetting and querying
platform feature flags.

Flags can be either global or architecture specific.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06 08:06:00 +02:00
Martin Kaiser
e8ab382811 staging: r8188eu: fix the declaration of process_pwrbit_data
Fix the declaration of process_pwrbit_data. Make the function static and
remove its prototype.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220602194807.281115-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:05:50 +02:00
Martin Kaiser
0ffa2a3a70 staging: r8188eu: use ieee80211 defines for back action codes
Replace the driver-specific defines for back action codes with the defines
from ieee80211.h.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220602194807.281115-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:05:48 +02:00
Paulo Alcantara
c36ee7dab7 cifs: fix reconnect on smb3 mount types
cifs.ko defines two file system types: cifs & smb3, and
__cifs_get_super() was not including smb3 file system type when
looking up superblocks, therefore failing to reconnect tcons in
cifs_tree_connect().

Fix this by calling iterate_supers_type() on both file system types.

Link: https://lore.kernel.org/r/CAFrh3J9soC36+BVuwHB=g9z_KB5Og2+p2_W+BBoBOZveErz14w@mail.gmail.com
Cc: stable@vger.kernel.org
Tested-by: Satadru Pramanik <satadru@gmail.com>
Reported-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-06 01:04:12 -05:00
Adrien Thierry
1dbcdf74a9 staging: vchiq_arm: remove global 'vchiq_states' array
Remove global 'vchiq_states' array, which is not used anymore.

This is part of an effort to address TODO item "Get rid of all non
essential global structures and create a proper per device structure"

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-10-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
ed57d93e77 staging: vchiq_arm: use state from vchiq instance
In 'handle_to_service', access the vchiq state from the vchiq instance
instead of the global 'vchiq_states' array. This will allow getting rid
of the global 'vchiq_states' array.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-9-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
6d02150cdf staging: vchiq_arm: pass vchiq instance to 'handle_to_service'
In order to remove the 'vchiq_states' global array, we need to pass the
vchiq_instance reference to the 'handle_to_service' function. This will
allow accessing the vchiq state through the vchiq instance instead of
through the global array.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-8-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
f23f8a05a1 staging: vchiq_arm: pass vchiq instance to 'vchiq_get_service_userdata'
In order to remove the 'vchiq_states' global array, we need to pass the
vchiq_instance reference to the 'handle_to_service' function, as well as
to all functions that call 'handle_to_service'. This will allow
accessing the vchiq state through the vchiq instance instead of through
the global array.

'handle_to_service' is called by 'vchiq_get_service_userdata'.
Therefore, pass the vchiq instance reference to it.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-7-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
bad44825fb staging: vchiq_arm: pass vchiq instance to 'vchiq_get_client_id'
In order to remove the 'vchiq_states' global array, we need to pass the
vchiq_instance reference to the 'handle_to_service' function, as well as
to all functions that call 'handle_to_service'. This will allow
accessing the vchiq state through the vchiq instance instead of through
the global array.

'handle_to_service' is called by 'vchiq_get_client_id'. Therefore, pass
the vchiq instance reference to it.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-6-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
14780bb174 staging: vchiq_arm: pass vchiq instance to 'find_service_by_handle'
In order to remove the 'vchiq_states' global array, we need to pass the
vchiq_instance reference to the 'handle_to_service' function, as well as
to all functions that call 'handle_to_service'. This will allow
accessing the vchiq state through the vchiq instance instead of through
the global array.

'handle_to_service' is called by 'find_service_by_handle'. Therefore,
pass the vchiq instance reference to 'find_service_by_handle' and to its
callers.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-5-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
726e79f8a6 staging: vchiq_arm: pass vchiq instance to service callbacks
In order to remove the 'vchiq_states' global array, we need to pass the
vchiq_instance reference to the 'handle_to_service' function, as well as
to all functions that call 'handle_to_service'. This will allow
accessing the vchiq state through the vchiq instance instead of through
the global array.

'handle_to_service' is called by 'service_callback'. Therefore, pass the
vchiq instance reference to 'service_callback'. This also requires
adding the vchiq instance reference to the service callbacks prototype,
and update all other callbacks accordingly.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-4-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:46 +02:00
Adrien Thierry
813fa44c74 staging: vchiq_arm: get rid of global device structure
Get rid of the global g_dev structure.

This is part of an effort to address TODO item "Get rid of all non
essential global structures and create a proper per device structure"

I chose to pass the vchiq_instance around instead of the device
reference because in order to get rid of the 'vchiq_states' global array
in the future, we will need another way to access the vchiq_state in the
'handle_to_service' function. Therefore, we will need to pass the
vchiq_instance to it (or the vchiq_state), and also pass it to functions
higher up in the caller chain, such as 'vchiq_bulk_transmit' and friends
which are used in the bcm2835-audio consumer.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-3-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:45 +02:00
Adrien Thierry
d8d307e681 staging: vchiq_arm: add reference to vchiq device in vchiq_state
Add a reference to the vchiq device in the vchiq_state structure. This
allows the device structure to be passed around, which will be useful in
order to get rid of the global g_dev structure. This change will also
make it possible to use standard kernel logging macros instead of the
custom ones.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220518191126.60396-2-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:03:45 +02:00
Xiang wangx
d2a4bc3d97 staging: rtl8192u: Fix syntax errors in comments
Delete the redundant word 'tx'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220603130702.6926-1-wangxiang@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:02:57 +02:00
Nam Cao
a0daad77a4 staging: vt6655: Update function description
The function vt6655_get_current_tsf has been updated while its
description has not. Update the description to correctly reflect
what it does.

Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220529160211.GA5805@nam-dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:02:03 +02:00
Hannes Braun
a8b088d6d9 staging: rtl8723bs: fix placement of braces
This patch should eliminate the following errors/warnings emitted by
checkpatch.pl:
- that open brace { should be on the previous line
- else should follow close brace '}'
- braces {} are not necessary for single statement blocks

Signed-off-by: Hannes Braun <hannesbraun@mail.de>
Link: https://lore.kernel.org/r/20220528123115.13024-1-hannesbraun@mail.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 08:00:49 +02:00
Martin Kaiser
76d01595b2 staging: r8188eu: calculate the addba request length
When issue_action_BA compiles an addba request, it does not add any
extensions. start_seq_num is the last field of the addba request.

The length of the request is the offset of the end of start_seq_num in the
struct ieee80211_mgmt that defines the message.

Use offsetofend to calculate this offset and drop the intermediate pktlen
increments as we add addba request components. (We have to keep the
increments for other message types until we use offsetofend for them as
well.)

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
56580e22fe staging: r8188eu: use mgmt to set start sequence number
Use the mgmt structure in issue_action_BA to set the start sequence
number.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
e3e3cdc43e staging: r8188eu: use ieee80211 to set addba capabilities
Use the mgmt structure and defines from ieee80211.h to set the
capabilities field of an addba request.

If issue_action_BA is called with action == WLAN_ACTION_ADDBA_REQ, the
status parameter contains the tid.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
34411b1920 staging: r8188eu: use mgmt to set the timeout
Use the mgmt structure in issue_action_BA to set the timeout in the
outgoing frame.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
c257851fe7 staging: r8188eu: use mgmt to set the dialog token
Use the mgmt structure in issue_action_BA to set the dialog token.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
a248ccf604 staging: r8188eu: use mgmt to set the action codes
Use the mgmt structure in issue_action_BA to set the action codes.
We have to distinguish between the different message types.

We also have to increment the packet length manually as we're no longer
calling rtw_set_fixed_ie, which increments the length.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
8d1aeb172d staging: r8188eu: use mgmt to set the category
Use the mgmt structure in issue_action_BA to set the category of the
outgoing frame. Remove the rtw_set_fixed_ie call.

We can now use the define directly, the category variable can be removed.

rtw_set_fixed_ie increments pattrib->pktlen, we have to do this ourselves
now (until we use a proper way to calculate the packet length).

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
d7767fc2e2 staging: r8188eu: use mgmt to set the sequence number
Use the mgmt structure in issue_action_BA to set the sequence number of
the outgoing frame.

pwlanhdr is now unused, it can be removed.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
2f71d4b040 staging: r8188eu: use mgmt to set the addresses
Use the mgmt structure in issue_action_BA to set the three addresses of
the outgoing frame.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
358d619656 staging: r8188eu: use ieee80211_mgmt in issue_action_BA
Define a struct ieee80211_mgmt variable in issue_action_BA, this will make
it much simpler to populate the fields of the outoing frame.

Use the new mgmt variable to set the type and subtype of the frame.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
f54550fd84 staging: r8188eu: use defines for the block action codes
Replace the numeric values for the block action codes in issue_action_BA
with the defines from ieee80211.h.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Martin Kaiser
846d846d6f staging: r8188eu: remove unnecessary category check
Remove the unnecessary category check in issue_action_BA. category is
initialised to 3 (WLAN_CATEGORY_BACK) and never updated.

The rtw_set_fixed_ie call gets a pointer to category but it doesn't update
the value.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220524090029.242584-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:59:47 +02:00
Philipp Hortmann
f551dc6e76 staging: vt6655: Delete upc.h
Delete upc.h as all macros have been removed from upc.h.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b553095c618e7885af5c3e42f9b9b39d95127a44.1653203927.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06 07:58:41 +02:00