Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
Merge OPP (Operating Performance Points) changes for 5.19-rc1:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* pm-opp:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
Building the cppc_cpufreq driver with for arm64 with
CONFIG_ENERGY_MODEL=n triggers the following warnings:
drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used
[-Werror=unused-function]
550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
| ^~~~~~~~~~~~~~~~~
drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used
[-Werror=unused-function]
481 | static int cppc_get_cpu_power(struct device *cpu_dev,
| ^~~~~~~~~~~~~~~~~~
Move the Energy Model related functions into specific guards.
This allows to fix the warning and prevent doing extra work
when the Energy Model is not present.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails:
drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’:
drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’?
cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em;
^~~~~~~~~~~~~~~~~~~
cpufreq_driver
Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE
to fix this.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Flush or passthrough requests are not accounted as normal IO in completion.
To reflect iostat for slow IO, io_ticks is updated when stat show called
based on inflight numbers.
It may cause inconsistent io_ticks calculation result.
So do not account non-passthrough request when check inflight.
Fixes: 86d7331299 ("block: update io_ticks when io hang")
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: samuelliao <samuelliao@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220530064059.1120058-1-haisuwang@tencent.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a dma_fence_unwrap_merge() macro which allows to unwrap fences
which potentially can be containers as well and then merge them back
together into a flat dma_fence_array.
v2: rename the function, add some more comments about how the wrapper is
used, move filtering of signaled fences into the unwrap iterator,
add complex selftest which covers more cases.
v3: fix signaled fence filtering once more
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-5-christian.koenig@amd.com
dma_fence_chain containers cleanup signaled fences automatically, so
filter those out from arrays as well.
v2: fix missing walk over the array
v3: massively simplify the patch and actually update the description.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-4-christian.koenig@amd.com
Set microphone pins 0x18 (rear) and 0x19 (front) to VREF_50 to fix the
microphone noise on ASUS TUF B550M-PLUS which uses the ALCS1200A codec.
The initial value was VREF_80.
The same issue is also present on Windows using both the default Windows
driver and all tested Realtek drivers before version 6.0.9049.1. Comparing
Realtek driver 6.0.9049.1 (the first one without the microphone noise) to
Realtek driver 6.0.9047.1 (the last one with the microphone noise)
revealed that the fix is the result of setting pins 0x18 and 0x19 to
VREF_50.
This fix may also work for other boards that have been reported to have
the same microphone issue and use the ALC1150 and ALCS1200A codecs, since
these codecs are similar and the fix in the Realtek driver on Windows is
common for both. However, it is currently enabled only for ASUS TUF
B550M-PLUS as this is the only board that could be tested.
Signed-off-by: Marios Levogiannis <marios.levogiannis@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220530074131.12258-1-marios.levogiannis@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In __spi_validate, there's a validation that no partial transfers
are accepted (xfer->len % w_size must be zero). When
max_chunk is not a multiple of bpw (e.g. max_chunk = 65535,
bpw = 16), the transfer will be rejected.
This patch aligns max_chunk to 2 bytes (the maximum value of bpw is 16),
so that no partial transfer will occur.
Fixes: d23d4d4dac ("drm/tinydrm: Move tinydrm_spi_transfer()")
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510030219.2486687-1-t123yh.xyz@gmail.com
When wlan load, firmware report the reg code with 0x6C for QCA6174,
it is world reg which checked by ath_is_world_regd(), then the reg
will be save into reg_world_copy of ath_common in ath_regd_init().
Later the regulatory of ath_common is updated to another country
code such as "US" in ath_reg_notifier_apply() by below call stack.
After that, regulatory_hint() is called in ath10k_mac_register()
and it lead "iw reg get" show two regdomain info as below.
global
country US: DFS-FCC
(2400 - 2472 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5730 - 5850 @ 80), (N/A, 30), (N/A)
(57240 - 71000 @ 2160), (N/A, 40), (N/A)
phy#0
country US: DFS-FCC
(2400 - 2472 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5730 - 5850 @ 80), (N/A, 30), (N/A)
(57240 - 71000 @ 2160), (N/A, 40), (N/A)
[ 4255.704975] Call Trace:
[ 4255.704983] ath_reg_notifier_apply+0xa6/0xc5 [ath]
[ 4255.704991] ath10k_reg_notifier+0x2f/0xd2 [ath10k_core]
[ 4255.705010] wiphy_regulatory_register+0x5f/0x69 [cfg80211]
[ 4255.705020] wiphy_register+0x459/0x8f0 [cfg80211]
[ 4255.705042] ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705049] ? __kmalloc+0xf4/0x218
[ 4255.705058] ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705066] ? ath10k_mac_register+0x70/0xaab [ath10k_core]
[ 4255.705075] ieee80211_register_hw+0x51a/0x7d1 [mac80211]
[ 4255.705084] ath10k_mac_register+0x8b4/0xaab [ath10k_core]
[ 4255.705094] ath10k_core_register_work+0xa5e/0xb45 [ath10k_core]
[ 4255.705100] ? __schedule+0x61f/0x7d3
[ 4255.705105] process_one_work+0x1b7/0x392
[ 4255.705109] worker_thread+0x271/0x35d
[ 4255.705112] ? pr_cont_work+0x58/0x58
[ 4255.705116] kthread+0x13f/0x147
[ 4255.705119] ? pr_cont_work+0x58/0x58
[ 4255.705123] ? kthread_destroy_worker+0x62/0x62
[ 4255.705126] ret_from_fork+0x22/0x40
At this moment, the two regdomain info is same, when run "iw reg set KR",
the global regdomain info changed to KR, but the regdomain of phy#0
does not change again. It leads inconsistent values between global and
phy#0 as below.
global
country KR: DFS-JP
(2402 - 2482 @ 40), (N/A, 13), (N/A)
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
(5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57000 - 66000 @ 2160), (N/A, 43), (N/A)
phy#0
country US: DFS-FCC
(2400 - 2472 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5730 - 5850 @ 80), (N/A, 30), (N/A)
(57240 - 71000 @ 2160), (N/A, 40), (N/A)
The initial reg code is 0x6C which saved in reg_world_copy of ath_common,
and the code US is updated from cfg80211 later, so ath10k should also
check the initial reg code before regulatory_hint().
After this fix, regdomain info is same between "iw reg get" and "iw reg
set xx", it does not have the regdomain info of phy#0 again.
global
country KR: DFS-JP
(2402 - 2482 @ 40), (N/A, 13), (N/A)
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
(5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57000 - 66000 @ 2160), (N/A, 43), (N/A)
This does not effect the channel list and power which ath10k used.
When the country code for regulatory_hint() in ath10k_mac_register()
is same with the global country code, then reg_set_rd_driver() of
cfg80211 called from crda which return -EALREADY to set_regdom() and
then update_all_wiphy_regulatory() will not be called while wlan load.
When run "iw reg set xx", reg_get_regdomain() which used by function
handle_channel() in net/wirelss/reg.c always use the regdomain
returned by get_cfg80211_regdom() because the initiator of last
regulatory_request is NL80211_REGDOM_SET_BY_USER, get_cfg80211_regdom()
is the global regdomain, then all the ieee80211_channel info is updated
in handle_channel() with the global regdomain.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Tested-on: QCA9984 hw1.0 PCI 10.4-3.6-00104
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220525132247.23459-1-quic_wgong@quicinc.com
Currently mac80211 doesn't calculate average signal when RSS(Receive side
scaling) is enabled from the driver, so average signal isn't printed in
the station dump. To address this issue, calculate the average signal
from RSSI within driver and display in the station dump.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1652965061-30457-1-git-send-email-quic_tmariyap@quicinc.com
Make sure to clear the IRQ affinity hint also on shutdown to avoid
triggering a WARN_ON_ONCE() in __free_irq() when stopping MHI while
using a single MSI vector.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: e94b07493d ("ath11k: Set IRQ affinity to CPU0 in case of one MSI vector")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220523143258.24818-1-johan+linaro@kernel.org
Make sure to allocate resources needed before registering the device.
This specifically avoids having a racing open() trigger a BUG_ON() in
mod_timer() when ath11k_mac_op_start() is called before the
mon_reap_timer as been set up.
I did not see this issue with next-20220310, but I hit it on every probe
with next-20220511. Perhaps some timing changed in between.
Here's the backtrace:
[ 51.346947] kernel BUG at kernel/time/timer.c:990!
[ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
...
[ 51.578225] Call trace:
[ 51.583293] __mod_timer+0x298/0x390
[ 51.589518] mod_timer+0x14/0x20
[ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k]
[ 51.603165] drv_start+0x38/0x60 [mac80211]
[ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211]
[ 51.617945] ieee80211_open+0x60/0xb0 [mac80211]
[ 51.625311] __dev_open+0x100/0x1c0
[ 51.631420] __dev_change_flags+0x194/0x210
[ 51.638214] dev_change_flags+0x24/0x70
[ 51.644646] do_setlink+0x228/0xdb0
[ 51.650723] __rtnl_newlink+0x460/0x830
[ 51.657162] rtnl_newlink+0x4c/0x80
[ 51.663229] rtnetlink_rcv_msg+0x124/0x390
[ 51.669917] netlink_rcv_skb+0x58/0x130
[ 51.676314] rtnetlink_rcv+0x18/0x30
[ 51.682460] netlink_unicast+0x250/0x310
[ 51.688960] netlink_sendmsg+0x19c/0x3e0
[ 51.695458] ____sys_sendmsg+0x220/0x290
[ 51.701938] ___sys_sendmsg+0x7c/0xc0
[ 51.708148] __sys_sendmsg+0x68/0xd0
[ 51.714254] __arm64_sys_sendmsg+0x28/0x40
[ 51.720900] invoke_syscall+0x48/0x120
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Fixes: 840c36fa72 ("ath11k: dp: stop rx pktlog before suspend")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
Add support to handle IGTK keys which are required for MFP to FW. Index ID
4 and 5 are used to store the IGTK key.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524120606.9675-4-ajay.kathat@microchip.com
Enable SAE authentication for AP and STA mode. In STA mode, allow the
driver to pass the auth frames which are received from firmware to
userspace application(hostapd) so that SAE authentication is offloaded to
userspace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
Deprecated WEP security for WILC driver as well as in firmware from
15.6 FW release onwards. After WEP security removal, freeup some codespace
which helped to add new features like WPA3 etc.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524120606.9675-2-ajay.kathat@microchip.com
For power-up sequence, WILC expects RESET set to high 5ms after making
chip_en(enable) so corrected chip power-up sequence by making RESET high.
For Power-Down sequence, the correct sequence make RESET and CHIP_EN low
without any extra delay.
Fixes: ec031ac479 ("wilc1000: Add reset/enable GPIO support to SPI driver")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524120606.9675-1-ajay.kathat@microchip.com
If the copy_from_user() fails or the user gives invalid date then the
correct thing to do is to return a negative error code. (Currently it
returns success).
I made a copy additional related cleanups:
1) There is no need to check "buffer" for NULL. That's handled by
copy_from_user().
2) The "h2c_len" variable cannot be negative because it is unsigned
and because sscanf() does not return negative error codes.
Fixes: 610247f46f ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YoOLnDkHgVltyXK7@kili
Sparse lists the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8821c.c
drivers/net/wireless/realtek/rtw88/rtw8821c.c:1880:22: warning: symbol 'rtw8821c_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8821c_hw_spec
occurs in rtw8821ce.h, which is not included in rtw8821c.h. That line is
moved, and the now empty file rtw8821ce.h is deleted.
Symbol 'rtw8821c_hw_spec' can be made constant.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524153716.20450-1-Larry.Finger@lwfinger.net
Sparse lists the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8723d.c
drivers/net/wireless/realtek/rtw88/rtw8723d.c:2704:22: warning: symbol 'rtw8723d_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8723d_hw_spec
occurs in rtw8723de.h, which is not included in rtw8723d.h. That line is
moved, and the now empty file rtw8723de.h is deleted.
Symbol 'rtw8723d_hw_spec' can be made constant.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524153621.19027-4-Larry.Finger@lwfinger.net
Sparse reports the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8822c.c
drivers/net/wireless/realtek/rtw88/rtw8822c.c:5313:22: warning: symbol 'rtw8822c_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8822c_hw_spec
occurs in rtw8822ce.h, which is not included in rtw8822c.h. That line is
moved, and the now empty file rtw8822ce.h is deleted.
Symbol 'rtw8822c_hw_spec' can be made constant.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524153621.19027-3-Larry.Finger@lwfinger.net
Sparse lists the following for rtw88:
CHECK drivers/net/wireless/realtek/rtw88/rtw8822b.c
drivers/net/wireless/realtek/rtw88/rtw8822b.c:2500:22: warning: symbol 'rtw8822b_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8822b_hw_spec
occurs in rtw8822be.h, which is not included in rtw8822b.h. That line is
moved, and the now empty file rtw8822be.h is deleted.
Symbol 'rtw8822b_hw_spec' can be made constant.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524153621.19027-2-Larry.Finger@lwfinger.net
Add this check to avoid crash by dereferencing a null pointer. When hwscan
fails due to no memory or dma failure, the scan flag in ieee80211_local is
cleared. So mac80211 determine that it's not hw_scan then calls
sw_scan_complete() with null vif, which is also freed during the fail.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520081523.45987-1-pkshih@realtek.com
Ivan reported /proc/sys/kernel/sched_autogroup_enabled went walk-about
and using the noautogroup command line parameter would result in a
boot error message.
Turns out the sysctl move placed the init function wrong.
Fixes: c8eaf6ac76 ("sched: move autogroup sysctls into its own file")
Reported-by: Ivan Kozik <ivan@ludios.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ivan Kozik <ivan@ludios.org>
Link: https://lkml.kernel.org/r/YpR2IqndgsyMzN00@worktop.programming.kicks-ass.net
Since SAR is more expected to follow U-NII bands to plan subbands,
division of 6GHz band is quite different from defined enum of subbands
which is used by PHY in most cases. It's hard and painful if we want to
keep using the same enum on SAR. So, we introduce another enum for SAR
subbands and adjust SAR flow to use it.
Besides, since 6GHz SAR subbands won't be divided with edge alignment,
some cases will span two SAR subbands. For these cases, we describe them
within an array of rtw89_sar_span and take the smaller one between SAR
settings of the two subbands.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520071731.38563-6-pkshih@realtek.com
RX DCK is receiver DC calibration. To keep good RF performance, do this
calibration again if the delta of thermal value from the last calibration
is more than 8.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520071731.38563-5-pkshih@realtek.com
This watchdog timeout status bit indicates hardware gets wrong, so run SER
L2 flow that calls mac80211 to restart hardware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520071731.38563-4-pkshih@realtek.com
Add this check to avoid crash by dereferencing a null pointer. When hwscan
fails due to no memory or dma failure, the scan flag in ieee80211_local is
cleared. So mac80211 determine that it's not hw_scan then calls
sw_scan_complete() with null vif, which is also freed during the fail.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520071731.38563-3-pkshih@realtek.com
Previously channel maintained by driver could be different from the
ones hardware actually is. Restore these variables back to prevent
unexpected behavior.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220520071731.38563-2-pkshih@realtek.com
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
At least mips64 has ist own CAUSE macro, so rename ours to
IWL_CAUSE to fix build issues.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: c191819642 ("iwlwifi: pcie: simplify MSI-X cause mapping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
The firmware has a 512 limit here, but we use less, so gcc
starts complaining about it:
drivers/net/wireless/marvell/libertas/cfg.c:1198:63: warning: array subscript ‘struct cmd_ds_802_11_associate_response[0]’ is partly outside array bounds of ‘unsigned char[203]’ [-Warray-bounds]
1198 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
| ^~
Since we size the command and response buffer per our needs
and not per the firmware maximum, change to a variable size
data array and put the 512 only into a comment.
In the end, that's actually what the code always wanted, and
it simplifies the code that used to subtract the fixed size
buffer size in two places.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220523180200.115fa27fbece.Ie66d874b047e7afad63900aa2df70f031711147e@changeid
A pointer into virtual memory is represented by a (void *)
not an u32, so the compiler warns:
drivers/tee/optee/call.c:365:29: warning: passing argument 1
of 'virt_to_pfn' makes pointer from integer without a
cast [-Wint-conversion]
Fix this with an explicit cast.
Cc: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: fixed merge conflict]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This series contains a two key cleanups for the new LARP code. Most
of it is refactoring and tweaking the code that creates kernel log
messages about enabling and disabling features -- we should be
warning about LARP being turned on once per mount, instead of once
per insmod cycle; we shouldn't be spamming the logs so aggressively
about turning *off* log incompat features.
The second part of the series refactors the LARP code responsible
for getting (and releasing) permission to use xattr log items. The
implementation code doesn't belong in xfs_log.c, and calls to
logging functions don't belong in libxfs -- they really should be
done by the VFS implementation functions before they start calling
into libraries.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As part of solving the memory leaks and UAF problems in the new LARP
code, kmemleak also reported that log recovery will leak the table
used to hash buffer cancellations if the recovery fails. Fix this
problem by creating alloc/free helpers that initialize and free the
hashtable contents correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For some reason commit 9a5280b312 ("xfs: reorder iunlink remove
operation in xfs_ifree") replaced a jump to the exit path in the
event of an xfs_difree() error with a direct return, which skips
releasing the perag reference acquired at the top of the function.
Restore the original code to drop the reference on error.
Fixes: 9a5280b312 ("xfs: reorder iunlink remove operation in xfs_ifree")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
New support:
- Tegra gpcdma Driver support
- Qualcomm SM8350, Sm8450 and SC7280 Device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- Deprecate '#dma-channels' & '#dma-requests' bindings
- Driver updates for stm32, ptdma idsx etc
-----BEGIN PGP SIGNATURE-----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=ANxH
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
Chuck has agreed to backstop me as maintainer of the file locking code,
and I'll do the same for him on knfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Various clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOnTBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJSAP9f6esP4RxZjNefiu6bLD43FMml9V2T
OLA+EZ9SIn21PgD+JGZ8kXNojDR8ZDa7j3j+7y5nzAj1x6jh8sdDUslryQI=
=vG72
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing tool updates from Steven Rostedt:
- Various clean ups and fixes to rtla (Real Time Linux Analysis)
* tag 'trace-tools-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla: Remove procps-ng dependency
rtla: Fix __set_sched_attr error message
rtla: Minor grammar fix for rtla README
rtla: Don't overwrite existing directory mode
rtla: Avoid record NULL pointer dereference
rtla/Makefile: Properly handle dependencies