It's more readable to just pass NULL directly instead of using a variable
for that.
Link: https://lkml.kernel.org/r/Y/yAlDytLH0ZNLNz@kili
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove empty if statement from nfs3_prepare_get_acl and update comment to
follow the one from the referred fs/posix_acl.c:get_acl().
No functional change intended.
Link: https://lkml.kernel.org/r/20221130151231.3654-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
procfs' .setattr() has updated i_uid, i_gid and i_mode into proc dirent,
we don't need to call mark_inode_dirty() for delayed update, remove it.
Link: https://lkml.kernel.org/r/20230131150840.34726-1-chao@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_PROC_FS is not set, proc_salinfo_show() is not used. Mark the
function as __maybe_unused to quieten the warning message.
../arch/ia64/kernel/salinfo.c:584:12: warning: 'proc_salinfo_show' defined but not used [-Wunused-function]
584 | static int proc_salinfo_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20230223034309.13375-1-rdunlap@infradead.org
Fixes: 3f3942aca6 ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_per_cpu_data() is called by find_memory(), which is marked as
__init. Therefore alloc_per_cpu_data() can also be marked as __init to
remedy this modpost problem.
WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text)
Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org
Fixes: 4b9ddc7cf2 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve the average delay precision of getdelay tool to microsecond. When
using the getdelay tool, it is sometimes found that the average delay
except CPU is not 0, but display is 0, because the precison is too low.
For example, see delay average of SWAP below when using ZRAM.
print delayacct stats ON
PID 32915
CPU count real total virtual total delay total delay average
339202 2793871936 9233585504 7951112 0.000ms
IO count delay total delay average
41 419296904 10ms
SWAP count delay total delay average
242589 1045792384 0ms
This wrong display is misleading, so improve the millisecond precision of
the average delay to microsecond just like CPU. Then user would get more
accurate information of delay time.
Link: https://lkml.kernel.org/r/202302131408087983857@zte.com.cn
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Here are a small set of various small driver changes for 6.3-rc6.
Included in here are:
- iio driver fixes for reported problems.
- coresight hwtracing bugfix for reported problem
- small counter driver bugfixes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZDFS3Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylKGgCeMnB5X+eZXhuj3xTUjYHsXVqX4MUAn3rsMqVt
zMHkQ76jJ85pTl4TFkBd
=IJ45
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small set of various small driver changes for 6.3-rc6.
Included in here are:
- iio driver fixes for reported problems
- coresight hwtracing bugfix for reported problem
- small counter driver bugfixes
All have been in linux-next for a while with no reported problems"
* tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: etm4x: Do not access TRCIDR1 for identification
coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
counter: 104-quad-8: Fix Synapse action reported for Index signals
counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
iio: adc: max11410: fix read_poll_timeout() usage
iio: dac: cio-dac: Fix max DAC write value check for 12-bit
iio: light: cm32181: Unregister second I2C client if present
iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
iio: adc: ad7791: fix IRQ flags
iio: buffer: make sure O_NONBLOCK is respected
iio: buffer: correctly return bytes written in output buffers
iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
iio: adis16480: select CONFIG_CRC32
drivers: iio: adc: ltc2497: fix LSB shift
iio: adc: qcom-spmi-adc5: Fix the channel name
Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZDFTtg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynImACXZSsiSzuMqAoEisjLfcb7bPovvQCfd5FntU3K
h6JE0Y44gi6WS9iWYHU=
=jDa+
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
serial: 8250: Prevent starting up DMA Rx on THRI interrupt
dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
tty: serial: sh-sci: Fix transmit end interrupt handler
Here are some small USB bugfixes for 6.3-rc6 that have been in my tree,
and in linux-next, for a while. Included in here are:
- new usb-serial driver device ids
- xhci bugfixes for reported problems
- gadget driver bugfixes for reported problems
- dwc3 new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZDFUVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylpNACdEe2HCKfVGbh5psDuVt7uSTwGg74An0Pb5UGp
zxHk+ikpEcbTSdxhM2Ce
=pjnj
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB bugfixes from Greg KH:
"Here are some small USB bugfixes for 6.3-rc6 that have been in my
tree, and in linux-next, for a while. Included in here are:
- new usb-serial driver device ids
- xhci bugfixes for reported problems
- gadget driver bugfixes for reported problems
- dwc3 new device id
All have been in linux-next with no reported problems"
* tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fixes error: uninitialized symbol 'len'
usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
usb: typec: altmodes/displayport: Fix configure initial pin assignment
usb: dwc3: pci: add support for the Intel Meteor Lake-S
xhci: Free the command allocated for setting LPM if we return early
Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"
xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
USB: serial: option: add Quectel RM500U-CN modem
usb: xhci: tegra: fix sleep in atomic call
USB: serial: option: add Telit FE990 compositions
USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs
Four small fixes, all in drivers. They're all one or two lines except
for the ufs one, but that's a simple revert of a previous feature.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZDB8byYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ4VAQCBB8jH
uxZVFoYfnhNOZxS8PQyW9JEy/NImLD7HVYIWNwEAwP8gNMsznlHAlwVQB6FVgf/d
vchWKg6mG0IK1ALN7Eg=
=j4gB
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, all in drivers. They're all one or two lines except
for the ufs one, but that's a simple revert of a previous feature"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)
scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously"
-----BEGIN PGP SIGNATURE-----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=YMIj
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-04-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Ensure that ublk always reads the whole sqe upfront (me)
- Fix for a block size probing issue with ublk (Ming)
- Fix for the bio based polling (Keith)
- NVMe pull request via Christoph:
- fix discard support without oncs (Keith Busch)
- Partition scan error handling regression fix (Yu)
* tag 'block-6.3-2023-04-06' of git://git.kernel.dk/linux:
block: don't set GD_NEED_PART_SCAN if scan partition failed
block: ublk: make sure that block size is set correctly
ublk: read any SQE values upfront
nvme: fix discard support without oncs
blk-mq: directly poll requests
-----BEGIN PGP SIGNATURE-----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=32lQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Just two minor fixes for provided buffers - one where we could
potentially leak a buffer, and one where the returned values was
off-by-one in some cases"
* tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux:
io_uring: fix memory leak when removing provided buffers
io_uring: fix return value when removing provided buffers
- fix a braino in the swiotlb alignment check fix (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=T0n5
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.3-2023-04-08' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix a braino in the swiotlb alignment check fix (Petr Tesarik)
* tag 'dma-mapping-6.3-2023-04-08' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix a braino in the alignment check fix
- Reset direct->addr back to its original value on error in updating
the direct trampoline code.
- Make lastcmd_mutex static.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZDB1JhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqihAQC6vNG/QFthBVj6++2O5+h+AGe3mIIv
+SVs3GpL+Gr1MAEA/Q+zK7niLHrWSMsyq3eYY63J10AhI/ZHuFm28MbjKQM=
=khcF
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple more minor fixes:
- Reset direct->addr back to its original value on error in updating
the direct trampoline code
- Make lastcmd_mutex static"
* tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/synthetic: Make lastcmd_mutex static
ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()
23 are cc:stable and the other 5 address issues which were introduced
during this merge cycle.
20 are for MM and the remainder are for other subsystems.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZDCmIAAKCRDdBJ7gKXxA
jhZuAQDn8ErAotUpLn1Pq6WU1liPenGoraBo/a2ubpOjguSINwD+J7L85vgVmA78
YzoKHObW18yBW7JSzpWZ2zw8q2gLQwQ=
=a1n7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"28 hotfixes.
23 are cc:stable and the other five address issues which were
introduced during this merge cycle.
20 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: fix a potential concurrency bug in RCU mode
maple_tree: fix get wrong data_end in mtree_lookup_walk()
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
nilfs2: fix sysfs interface lifetime
mm: take a page reference when removing device exclusive entries
mm: vmalloc: avoid warn_alloc noise caused by fatal signal
nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
zsmalloc: document freeable stats
zsmalloc: document new fullness grouping
fsdax: force clear dirty mark if CoW
mm/hugetlb: fix uffd wr-protection for CoW optimization path
mm: enable maple tree RCU mode by default
maple_tree: add RCU lock checking to rcu callback functions
maple_tree: add smp_rmb() to dead node detection
maple_tree: fix write memory barrier of nodes once dead for RCU mode
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
maple_tree: fix freeing of nodes in rcu mode
maple_tree: detect dead nodes in mas_start()
maple_tree: be more cautious about dead nodes
...
There is a spelling mistake in a test assert message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230406080226.122955-1-colin.i.king@gmail.com
Though presently unused, there is an SMC64 view of the Arm architecture
calls defined by the SMCCC. The documentation of the SMCCC filter states
that the SMC64 range is reserved, but nothing actually prevents
userspace from applying a filter to the range.
Insert a range with the HANDLE action for the SMC64 arch range, thereby
preventing userspace from imposing filtering/forwarding on it.
Fixes: fb88707dd3 ("KVM: arm64: Use a maple tree to represent the SMCCC filter")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230408121732.3411329-2-oliver.upton@linux.dev
I recently started uploading prebuilt stable versions of LLVM to
kernel.org, which should make building the kernel with LLVM more
accessible to maintainers and developers. Link them in the LLVM
documentation to make this more visible.
Link: https://lore.kernel.org/20230319235619.GA18547@dev-arch.thelio-3990X/
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Bill Wendling <morbo@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 370f696e44 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230321215624.78383-7-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Commit 370f696e44 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-6-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Commit 370f696e44 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-5-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Commit 370f696e44 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-4-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Commit 370f696e44 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-3-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Since 32ef9e5054, -Wa,-gdwarf-2 is no longer used in KBUILD_AFLAGS.
Instead, it includes -g, the appropriate -gdwarf-* flag, and also the
-Wa versions of both of those if building with Clang and GNU as. As a
result, debug info was being generated for the purgatory objects, even
though the intention was that it not be.
Fixes: 32ef9e5054 ("Makefile.debug: re-enable debug info for .S files")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Cc: stable@vger.kernel.org
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For dual-bridges scenario, pch_pic_acpi_init() will be called
in following path:
cpuintc_acpi_init
acpi_cascade_irqdomain_init(in cpuintc driver)
acpi_table_parse_madt
eiointc_parse_madt
eiointc_acpi_init /* this will be called two times
correspondingto parsing two
eiointc entries in MADT under
dual-bridges scenario*/
acpi_cascade_irqdomain_init(in eiointc driver)
acpi_table_parse_madt
pch_pic_parse_madt
pch_pic_acpi_init /* this will be called depend
on valid parent IRQ domain
handle for one or two times
corresponding to parsing
two pchpic entries in MADT
druring calling
eiointc_acpi_init() under
dual-bridges scenario*/
During the first eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called just one time since only
one valid parent IRQ domain handle will be found for current
eiointc IRQ domain.
During the second eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called two times since two valid
parent IRQ domain handles will be found. So in pch_pic_acpi_init(),
we must have a reasonable way to prevent from creating second same
pch_pic IRQ domain.
The patch matches gsi base information in created pch_pic IRQ
domains to check if the target domain has been created to avoid the
bug mentioned above.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-6-lvjianmin@loongson.cn
When support suspend/resume for loongson-pch-pic, the syscore_ops
is registered twice in dual-bridges machines where there are two
pch-pic IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list, so the patch will corret it.
Fixes: 1ed008a2c3 ("irqchip/loongson-pch-pic: Add suspend/resume support")
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-5-lvjianmin@loongson.cn
When support suspend/resume for loongson-eiointc, the syscore_ops
is registered twice in dual-bridges machines where there are two
eiointc IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list. Also, cpuhp_setup_state_nocalls is only
needed to call for once. So the patch will corret them.
Fixes: a90335c2df ("irqchip/loongson-eiointc: Add suspend/resume support")
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-4-lvjianmin@loongson.cn
In eiointc_acpi_init(), a *eiointc* node is passed into
acpi_get_vec_parent() instead of a required *NUMA* node (on some chip
like 3C5000L, a *NUMA* node means a *eiointc* node, but on some chip
like 3C5000, a *NUMA* node contains 4 *eiointc* nodes), and node in
struct acpi_vector_group is essentially a *NUMA* node, which will
lead to no parent matched for passed *eiointc* node. so the patch
adjusts code to use *NUMA* node for parameter node of
acpi_set_vec_parent/acpi_get_vec_parent.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-3-lvjianmin@loongson.cn
In pch_pic_parse_madt(), a NULL parent pointer will be
returned from acpi_get_vec_parent() for second pch-pic domain
related to second bridge while calling eiointc_acpi_init() at
first time, where the parent of it has not been initialized
yet, and will be initialized during second time calling
eiointc_acpi_init(). So, it's reasonable to return zero so
that failure of acpi_table_parse_madt() will be avoided, or else
acpi_cascade_irqdomain_init() will return and initialization of
followed pch_msi domain will be skipped.
Although it does not matter when pch_msi_parse_madt() returns
-EINVAL if no invalid parent is found, it's also reasonable to
return zero for that.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-2-lvjianmin@loongson.cn
We add empty irq_eoi() in RISC-V INTC driver for child irqchip
drivers (such as PLIC, SBI IPI, CLINT, APLIC, IMSIC, etc) which
implement chained handlers for parent per-HART local interrupts.
This hels us avoid unnecessary mask/unmask of per-HART local
interrupts at the time of handling interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-8-apatel@ventanamicro.com
If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote icache flushe directly from supervisor mode instead of
using the SBI RFENCE calls.
This patch extends remote icache flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-7-apatel@ventanamicro.com
If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote TLB flushes directly from supervisor mode instead of
using the SBI RFENCE calls.
This patch extends remote TLB flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-6-apatel@ventanamicro.com
To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.
The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-5-apatel@ventanamicro.com
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
Various RISC-V drivers (such as SBI IPI, SBI Timer, SBI PMU, and
KVM RISC-V) don't have associated DT node but these drivers need
standard per-CPU (local) interrupts defined by the RISC-V privileged
specification.
We add riscv_get_intc_hwnode() in arch/riscv which allows RISC-V
drivers not having DT node to discover INTC hwnode which in-turn
helps these drivers to map per-CPU (local) interrupts provided
by the INTC driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-3-apatel@ventanamicro.com
The software interrupt pending (i.e. [M|S]SIP) bit is writeable for
S-mode but read-only for M-mode so we clear this bit only when using
SBI IPI operations.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-2-apatel@ventanamicro.com
The priority and enable registers of plic will be reset
during hibernation power cycle in poweroff mode,
add the syscore callbacks to save/restore those registers.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302140709.CdkxgtPi-lkp@intel.com/
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404032908.89638-1-mason.huo@starfivetech.com
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org> (csky)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230310144710.1543070-1-robh@kernel.org
Request memory region in order to display it in /proc/iomem.
Also stop printing the MMIO address since it just displays (ptrval).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230316192833.1603149-1-noltari@gmail.com
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Link: https://developer.nvidia.com/docs/t241-fabric-4/nvidia-t241-fabric-4-errata.pdf
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR.
Co-developed-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (for SMCCC/SOC ID bits)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230319024314.3540573-2-sdonthineni@nvidia.com
With the last non-OF, non-ACPI user of the GIC being removed in
e73307b9eb ("ARM: cns3xxx: remove entire platform"), we can finally
drop the entry point and do some minor cleanup.
We also make the driver depend on CONFIG_OF, which is required
even when CONFIG_ACPI is selected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230315130218.3212033-1-maz@kernel.org
tsl2772_read_prox_diodes() will correctly parse the properties from
device tree to determine which proximity diode(s) to read from, however
it didn't actually set this value on the struct tsl2772_settings. Let's
go ahead and fix that.
Reported-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/lkml/20230327120823.1369700-1-trix@redhat.com/
Fixes: 94cd1113aa ("iio: tsl2772: add support for reading proximity led settings from device tree")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20230404011455.339454-1-bmasney@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add definition of a new Gaudi2 server type. This represents
the connectivity between the cards in that server type.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
