Some error paths in mrq_debug_read and bpmp_debug_show would overwrite
the return error code with a subsequent call to mrq_debug_close.
Change the code to only change the error code if there was no prior
error.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support sparse caches that don't store data in raw format
factor out the parts of the raw block sync implementation that deal with
writing a single register via _regmap_write().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-1-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the USB interface "wireless_status" for the G935 receiver when
receiving battery notifications.
This will allow sound daemons such as Pipewire or PulseAudio to know
whether or not the headset is turned on and connected.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-6-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This adds the API that allows device specific drivers to tell user-space
about whether the wireless device is connected to its receiver dongle.
See "USB: core: Add wireless_status sysfs attribute" for a detailed
explanation of what this attribute should be used for.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-5-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add a wireless_status sysfs attribute to USB devices to keep track of
whether a USB device that's comprised of a receiver dongle and an emitter
device over a, most of the time proprietary, wireless link has its emitter
connected or disconnected.
This will be used by user-space OS components to determine whether the
battery-powered part of the device is wirelessly connected or not,
allowing, for example:
- upower to hide the battery for devices where the device is turned off
but the receiver plugged in, rather than showing 0%, or other values
that could be confusing to users
- Pipewire to hide a headset from the list of possible inputs or outputs
or route audio appropriately if the headset is suddenly turned off, or
turned on
- libinput to determine whether a keyboard or mouse is present when its
receiver is plugged in.
This is done at the USB interface level as:
- the interface on which the wireless status is detected is sometimes
not the same as where it could be consumed (eg. the audio interface
on a headset dongle will still appear even if the headset is turned
off), and we cannot have synchronisation of status across subsystems.
- this behaviour is not specific to HID devices, even if the protocols
used to determine whether or not the remote device is connected can
be HID.
This is not an attribute that is meant to replace protocol specific
APIs, such as the ones available for WWAN, WLAN/Wi-Fi, or Bluetooth
or any other sort of networking, but solely for wireless devices with
an ad-hoc “lose it and your device is e-waste” receiver dongle.
The USB interface will only be exporting the wireless_status sysfs
attribute if it gets set through the API exported in the next commit.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-4-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add the Logitech G935 headset that uses the HID++ protocol to the
list of supported devices.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-3-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Use the compiler to force a 100-length array, rather than check the
length after the fact.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Now that USB HID++ devices can gather a serial number that matches the
one that would be gathered when connected through a Unifying receiver,
remove the last difference by dropping the product ID as devices
usually have different product IDs when connected through USB or
Unifying.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying before patch: 4067-e8-ce-cd-45
- USB before patch: c086-e8-ce-cd-45
- Unifying and USB after patch: e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
For devices that support the 0x0003 feature (Device Information) version 4,
set the serial based on the output of that feature, rather than relying
on the usbhid code setting the USB serial.
This should allow the serial when connected through USB to (nearly)
match the one when connected through a unifying receiver.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying: 4067-e8-ce-cd-45
- USB before patch: 017C385C3837
- USB after patch: c086-e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Since the esdhc controller is sdhci compatible, the fsl-imx-esdhc.yaml
should ref sdhci-common.yaml to use 'sdhci-caps-mask' property.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230328060740.1984239-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are many log messages scattered throughout the mt8186 sound
drivers, and they are frequently triggered.
To avoid spamming the console, move these messages to the debug level.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230329080418.1100-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.
acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.
Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim Integrated MAX98371 audio codec bindings to DT schema.
Signed-off-by: André Morishita <andremorishita@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230401181930.533067-1-andremorishita@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62
Signed-off-by: Mark Brown <broonie@kernel.org>
The file named 'controls' in the DSP's debugfs root contains a
formatted table describing the controls defined within the loaded DSP
firmware, it is of the form
name: len region:offset addr fwname algid ctltype flags en dirty
Where flags is represented as a character for each flag if set, or '-',
enabled is whether the control is enabled or disabled and dirty is
whether the control value is set in the cache but not the hardware.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328131018.6820-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original patch uses a feature in lib/vsprintf.c to handle the invalid
address when tring to print *_fw_module->man4_module_entry.name when the
*rc_fw_module is NULL.
This case is handled by check_pointer_msg() internally and turns the
invalid pointer to '(efault)' for printing but it is hiding useful
information about the circumstances. Change the print to emmit the name
of the widget and a note on which side's fw_module is missing.
Fixes: e3720f92e0 ("ASoC: SOF: avoid a NULL dereference with unsupported widgets")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/4826f662-42f0-4a82-ba32-8bf5f8a03256@kili.mountain/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Rule: 'Cc: stable@vger.kernel.org' or 'commit <sha1> upstream.'
Link: https://lore.kernel.org/r/20230403090909.18233-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original check for non-null "user" object was introduced by commit
e11fea92e1 ("kmsg: export printk records to the /dev/kmsg interface")
when "user" could be NULL if /dev/ksmg was opened for writing.
Subsequent change 750afe7bab ("printk: add kernel parameter to control
writes to /dev/kmsg") made "user" context required for files opened for
write, but didn't remove now redundant checks for it to be non-NULL.
This patch removes the dead code while preserving the current logic.
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburski@gmail.com>
CC: Petr Mladek <pmladek@suse.com>
CC: Sergey Senozhatsky <senozhatsky@chromium.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: John Ogness <john.ogness@linutronix.de>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/167929571877.2810.9926967619100618792.stgit@skinsburskii.localdomain
From the commit message adding the first s2idle quirks:
> Lenovo laptops that contain NVME SSDs across a variety of generations have
> trouble resuming from suspend to idle when the IOMMU translation layer is
> active for the NVME storage device.
>
> This generally manifests as a large resume delay or page faults. These
> delays and page faults occur as a result of a Lenovo BIOS specific SMI
> that runs during the D3->D0 transition on NVME devices.
Add the DMI ids for another variant of the T14s Gen1, which also needs
the s2idle quirk.
Link: https://lore.kernel.org/all/20220503183420.348-1-mario.limonciello@amd.com/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2084655#p2084655
Signed-off-by: Benjamin Asbach <asbachb.kernel@impl.it>
Tested-by: Benjamin Asbach <asbachb.kernel@impl.it>
Link: https://lore.kernel.org/r/20230331232447.37204-1-asbachb.kernel@impl.it
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On ThinkStations on retrieving the attribute value the BIOS appends the
possible values to the string.
Clean up the display in the current_value_show function so the options
part is not displayed.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Reported by Mario Limoncello <Mario.Limonciello@amd.com>
Link: https://github.com/fwupd/fwupd/issues/5077#issuecomment-1488730526
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230403013120.2105-2-mpearson-lenovo@squebb.ca
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
My previous commit introduced a memory leak where the item allocated
from tlmi_setting was not freed.
This commit also renames it to avoid confusion with the similarly name
variable in the same function.
Fixes: 8a02d70679 ("platform/x86: think-lmi: Add possible_values for ThinkStation")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/lkml/df26ff45-8933-f2b3-25f4-6ee51ccda7d8@gmx.de/T/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230403013120.2105-1-mpearson-lenovo@squebb.ca
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When retriving a item string with tlmi_setting(), the result has to be
freed using kfree(). In current_value_show() however, malformed
item strings are not freed, causing a memory leak.
Fix this by eliminating the early return responsible for this.
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/platform-driver-x86/01e920bc-5882-ba0c-dd15-868bf0eca0b8@alu.unizg.hr/T/#t
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 0fdf10e5fc ("platform/x86: think-lmi: Split current_value to reflect only the value")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230331213319.41040-1-W_Armin@gmx.de
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add QSPI support on STM32MP13x SoC family
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
We generally try to avoid installing a file descriptor into the caller's
file descriptor table just to close it again via close_fd() in case an
error occurs. Instead we reserve a file descriptor but don't install it
into the caller's file descriptor table yet. If we fail for other,
unrelated reasons we can just close the reserved file descriptor and if
we make it past all meaningful error paths we just install it. Fanotify
gets this right already for one fd type but not for pidfds.
Use the new pidfd_prepare() helper to reserve a pidfd and a pidfd file
and switch to the more common fd allocation and installation pattern.
Acked-by: Jan Kara <jack@suse.cz>
Message-Id: <20230327-pidfd-file-api-v1-3-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stop open-coding get_unused_fd_flags() and anon_inode_getfile(). That's
brittle just for keeping the flags between both calls in sync. Use the
dedicated helper.
Message-Id: <20230327-pidfd-file-api-v1-2-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new helper that allows to reserve a pidfd and allocates a new
pidfd file that stashes the provided struct pid. This will allow us to
remove places that either open code this function or that call
pidfd_create() but then have to call close_fd() because there are still
failure points after pidfd_create() has been called.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
On the remote side, when QRTR socket is removed, af_qrtr will call
qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours
including local NS. NS upon receiving the DEL_CLIENT packet, will remove
the lookups associated with the node:port and broadcasts the DEL_SERVER
packet.
But on the host side, due to the arrival of the DEL_CLIENT packet, the NS
would've already deleted the server belonging to that port. So when the
remote's NS again broadcasts the DEL_SERVER for that port, it throws below
error message on the host:
"failed while handling packet from 2:-2"
So fix this error by not broadcasting the DEL_SERVER packet when the
DEL_CLIENT packet gets processed."
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle says:
====================
net: dsa: add support for MT7988
The MediaTek MT7988 SoC comes with a built-in switch very similar to
previous MT7530 and MT7531. However, the switch address space is mapped
into the SoCs memory space rather than being connected via MDIO.
Using MMIO simplifies register access and also removes the need for a bus
lock, and for that reason also makes interrupt handling more light-weight.
Note that this is different from previous SoCs like MT7621 and MT7623N
which also came with an integrated MT7530-like switch which yet had to be
accessed via MDIO.
Split-off the part of the driver registering an MDIO driver, then add
another module acting as MMIO/platform driver.
The whole series has been tested on various MediaTek boards:
* MT7623A + MT7530 (BPi-R2)
* MT7986A + MT7531 (BPi-R3)
* MT7988A reference board
Changes since v1:
* use 'internal' PHY mode where appropriate
* use regmap_update_bits in mt7530_rmw
* improve dt-bindings
Changes since RFC v3:
* WARN_ON_ONCE if register read fails
* move probing of the reset GPIO and reset controller link out of
common probe function, as they are not actually common
Changes since RFC v2:
* split into many small commits to ease review
* introduce helper functions to reduce code duplication
* use helpers for locking to make lock-skipping easier and less ugly
to implement.
* add dt-bindings for mediatek,mt7988-switch
Changes since initial RFC:
* use regmap for register access and move register access to bus-
specific driver
* move initialization of MT7531 SGMII PCS to MDIO driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for the built-in switch which can be found in the
MediaTek MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver for the built-in Gigabit Ethernet switch which can be found
in the MediaTek MT7988 SoC.
The switch shares most of its design with MT7530 and MT7531, but has
it's registers mapped into the SoCs register space rather than being
connected externally or internally via MDIO.
Introduce a new platform driver to support that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As MT7530 and MT7531 internally use 32-bit wide registers, each access
to any register of the switch requires several operations on the MDIO
bus. Hence if there is congruent access, e.g. due to PCS or PHY
polling, this can mess up and interfere with another ongoing register
access sequence.
However, the MDIO bus mutex is only relevant for MDIO-connected
switches. Prepare switches which have there registers directly mapped
into the SoCs register space via MMIO which do not require such
locking. There we can simply use regmap's default locking mechanism.
Hence guard mutex operations to only be performed in case of MDIO
connected switches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split MT7530 switch driver into a common part and a part specific
for MDIO connected switches and multi-chip modules.
Move MDIO-specific functions to newly introduced mt7530-mdio.c while
keeping the common parts in mt7530.c.
Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
implied by CONFIG_NET_DSA_MT7530.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
MT7988 shares a significant part of the setup function with MT7531.
Split-off those parts into a shared function which is going to be used
also by mt7988_setup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used parts from mt7530_remove into new
mt7530_remove_common helper function which will be used by both,
mt7530_remove and the to-be-introduced mt7988_remove.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used parts from mt7530_probe into new mt7530_probe_common
helper function which will be used by both, mt7530_probe and the
to-be-introduced mt7988_probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of splitting mt7530.c into a driver for MDIO-connected
as well as MDIO-accessed built-in switches on one hand and MMIO-accessed
built-in switches move the p5_inft_modes() function from mt7530.h to
mt7530.c. The function is only needed there and will trigger a compiler
warning about a defined but unused function otherwise when including
mt7530.h in the to-be-introduced bus-specific drivers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the MDIO bus lock only needs to be involved if actually operating
on an MDIO-connected switch we will need to skip locking for built-in
switches which are accessed via MMIO.
Create helper functions which simplify that upcoming change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move creating the SGMII PCS from mt753x_setup() to the more appropriate
mt7530_probe() function.
This is done also in preparation of moving all functions related to
MDIO-connected MT753x switches to a separate module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use regmap API to access the switch register space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of wrapping the locked register accessor functions, use the
unlocked variants and add locking wrapper functions to let regmap
handle the locking.
This is a preparation towards being able to always use regmap to
access switch registers instead of open-coded accessor functions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of macro templates use a dedidated function and allocated
regmap_config when creating the regmaps for the pcs-mtk-lynxi
instances.
This is in preparation to switching to use unlocked regmap accessors
and have regmap's locking API handle locking for us.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simply returning the negative error value instead of the read value
doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1)
so this kind of error will not go unnoticed.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: smsc: add support for edpd tunable
This adds support for the EDPD PHY tunable.
Per default EDPD is disabled in interrupt mode, the tunable can be used
to override this, e.g. if the link partner doesn't use EDPD.
The interval to check for energy can be chosen between 1000ms and
2000ms. Note that this value consists of the 1000ms phylib interval
for state machine runs plus the time to wait for energy being detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
