Since we're just importing a single vector, we don't have to turn it
into an ITER_IOVEC. Instead turn it into an ITER_UBUF, which is cheaper
to iterate.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add an internal struct iovec that we can return as a pointer, with the
fields of the iovec overlapping with the ITER_UBUF ubuf and length
fields.
Then we can have iter_iov() check for the appropriate type, and return
&iter->__ubuf_iovec for ITER_UBUF and iter->__iov for ITER_IOVEC and
things will magically work out for a single segment request regardless
of either type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To avoid needing to check if a given user backed iov_iter is of type
ITER_IOVEC or ITER_UBUF, set the number of segments for the ITER_UBUF
case to 1 as we're carrying a single segment.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These just return the address and length of the current iovec segment
in the iterator. Convert existing iov_iter_iovec() users to use them
instead of getting a copy of the current vec.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for switching single segment iterators to using ITER_UBUF,
swap the check for whether we are user backed or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for switching single segment iterators to using ITER_UBUF,
swap the check for whether we are user backed or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for switching single segment iterators to using ITER_UBUF,
swap the check for whether we are user backed or not. While at it, move
it outside the srcu locking area to clean up the code a bit.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This returns a pointer to the current iovec entry in the iterator. Only
useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF
and ITER_IOVEC identically for the first segment.
Rename struct iov_iter->iov to iov_iter->__iov to find any potentially
troublesome spots, and also to prevent anyone from adding new code that
accesses iter->iov directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace open coded CPU nodes reading of "reg" and translation to logical
ID with of_cpu_node_to_id().
The original code called of_parse_phandle() CONFIG_NR_CPUS times
regardless of the length of 'cpus'. Optimize the loop to bail out once
of_parse_phandle() fails as the end of 'cpus' property has been reached.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230327205228.573456-1-robh@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable CRU, CSI on RZ/G2L SMARC EVK and tie the CSI to OV5645 sensor
using Device Tree overlay. rz-smarc-cru-csi-ov5645.dtsi is created so
that RZ/G2L alike EVKs can make use of it.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230322125648.24948-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable sci0 node using dt overlay and disable can{0,1}-stb-hog
nodes in DT overlay as its pins are shared with sci0 pins.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230321114753.75038-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the four General Purpose Switches on the Marzen development
board, so they can be used for user input and/or for wake-up from s2ram.
The GPIO block on R-Car H1 does not support triggering interrupts on
both edges of a changing input signal, hence one cannot use gpio-keys
with gpios properties. Instead, one of two alternatives needs to be
used:
1. Use gpio-keys with interrupts instead of gpios properties, at the
expense of receiving only key presses (release events will be
auto-generated),
2. Use gpio-keys-polled with gpios properties, at the expense of
making these keys unusable as wake-up sources.
As the DTS for the Marzen development board serves mainly as an example,
the approach taken is to use the first alternative for the first two
switches, and the second alternative for the last two switches.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f834a3c397362f2424fcae6a0c0440356208b182.1679329829.git.geert+renesas@glider.be
This patch adds missing variable no_cs descriptions.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20230306014239.80570-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a keyword match pattern for the word "renesas," in files to the
ARM/RISC-V/RENESAS ARCHITECTURE section. This make sure patches
changing drivers that match against "renesas,<foo>" (as used mostly for
Renesas on-SoC components) are CCed to the linux-renesas-soc mailing
list.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/c1be1e97c5457eade25b0eb5118196677cecfc08.1679039809.git.geert+renesas@glider.be
As the of_node member of struct device always exists, and there is a
dummy of of_device_get_match_data() for the !CONFIG_OF case, there is no
longer a need to protect code using these interfaces with an #ifdef.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/55d72ce46b43ec2f41681cb5ba7ca7fcebdb98d1.1679416005.git.geert+renesas@glider.be
Issue the same error message in case an illegal page boundary crossing
has been detected in both cases where this is tested.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20230329080259.14823-1-jgross@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the Renesas pin control driver supports pins that can switch
their I/O voltage levels between either 1.8V and 3.3V, or between 2.5V
and 3.3V. However, some SoCs have pins that can switch between 1.8V and
2.5V.
Add support for this by replacing the separate SH_PFC_PIN_CFG_IO_VOLTAGE
capability and voltage level flags by a 2-bit field, to cover three
possible I/O voltage switching options.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0c04925457bf3f7e78e7e3851528d9a4c29246da.1678271030.git.geert+renesas@glider.be
Commit 537db25ca3 ("pinctrl: renesas: Add I/O voltage level
flag") introduced new flags to support pins that can switch their
voltage levels between either 1.8V and 3.3V, or between 2.5V and 3.3V.
The old SH_PFC_PIN_CFG_IO_VOLTAGE flag was retained to avoid having to
change existing drivers.
Replace SH_PFC_PIN_CFG_IO_VOLTAGE by SH_PFC_PIN_CFG_IO_VOLTAGE_18_33, to
make the voltage configuration explicit, and to prepare for the advent
of support for more voltage levels.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae5f879c093f3e3cd50ba1495975bccfad81237b.1678271030.git.geert+renesas@glider.be
The POC Control Register 0 (POCCTRL0) on R-Car D3 is not registered in
the pinmux_ioctrl_regs[] array. Hence it is not saved/restored during
suspend/resume, and its contents may be lost after s2ram.
This went unnoticed when improving suspend/resume support in commit
d92ee9cf8e ("pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register
across suspend/resume").
Fix this by moving the pinmux_ioctrl_regs[] array up, and adding the
POCCTRL0 register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d17402b83b1f3fa0f572527c0382027bccb86205.1678271030.git.geert+renesas@glider.be
Several devices (e.g. SC8280XP and SM8450) expect a NPL (Near Pad Logic)
clock. Add the clock and customize allowed clocks per each variant.
The clocks are also required by ADSP in all variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330113405.55722-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch reports:
drivers/leds/flash/leds-qcom-flash.c:103:18: warning:
symbol 'mvflash_3ch_regs' was not declared. Should it be static?
drivers/leds/flash/leds-qcom-flash.c:115:18: warning:
symbol 'mvflash_4ch_regs' was not declared. Should it be static?
These variables are only used locally, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230317191341.1670660-1-trix@redhat.com
We increase cache->nr_cached when we free into the cache but don't
decrease when we take from it, so in some time we'll get an empty
cache with cache->nr_cached larger than IO_ALLOC_CACHE_MAX, that fails
io_alloc_cache_put() and effectively disables caching.
Fixes: 9b797a37c4 ("io_uring: add abstraction around apoll cache")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 55a8a5c16eb3 ("leds: rgb: mt6370: Add MediaTek MT6370 current sink
type LED Indicator support") introduces the config LEDS_MT6370_RGB, which
selects the non-existing config LINEAR_RANGE. As the driver includes
linux/linear_range.h, it is a safe guess that the config actually intends
to select LINEAR_RANGES, which provides the library implementation for the
function prototypes defined in the linear_range header file.
Correct this naming confusion in the LEDS_MT6370_RGB config definition.
Fixes: 55a8a5c16eb3 ("leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230323105410.10396-1-lukas.bulwahn@gmail.com
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144735.1546817-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org
Add lockdep annotations for the following properties that must hold:
* Any error log retrieval must be atomically coupled with the prior
RTAS call, without a window for another RTAS call to occur before the
error log can be retrieved.
* All users of the core rtas_args parameter block must hold rtas_lock.
Move the definitions of rtas_lock and rtas_args up in the file so that
__do_enter_rtas_trace() can refer to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-6-010e4416f13f@linux.ibm.com
The 'filter' member is a pointer, not a bool; fix the wording
accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-4-010e4416f13f@linux.ibm.com
Add documentation for rtas_call_unlocked(), including details on how
it differs from rtas_call().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-3-010e4416f13f@linux.ibm.com
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
CHRP and PAPR agree: "In order to make an RTAS call, the operating
system must construct an argument call buffer aligned on an eight byte
boundary in physically contiguous real memory [...]." (7.2.7 Calling
Mechanism and Conventions).
struct rtas_args is the type used for this argument call buffer. The
unarchitected 'rets' member happens to produce 8-byte alignment for
the struct on 64-bit targets in practice. But without an alignment
directive the structure will have only 4-byte alignment on 32-bit
targets:
$ nm b/{before,after}/chrp32/vmlinux | grep rtas_args
c096881c b rtas_args
c0968820 b rtas_args
Add an alignment directive to the struct rtas_args declaration so all
instances have the alignment required by the specs. rtas-types.h no
longer refers to any spinlock types, so drop the spinlock_types.h
inclusion while we're here.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-1-010e4416f13f@linux.ibm.com
LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK
when ATA is not set/enabled causes a Kconfig warning:
WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
Selected by [y]:
- ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]
Fix this by making ADB_PMU_LED_DISK depend on ATA.
Seen on both PPC32 and PPC64.
Fixes: 0e865a80c1 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'
Fixes: c4342ff92b ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6 ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
