The mvpp2 parser entry for QinQ has the inner and outer VLAN
in the wrong order.
Fix the problem by swapping them.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although we now sanitycheck MMIO access during driver load to make sure
the MMIO BAR isn't returning all 0xFFFFFFFF, there have been a few cases
where (temporarily?) unreliable MMIO access has happened after GPU
resets or power events. We'll often notice this on our next GT register
access since forcewake handling will fail; let's change our handling
slightly so that when this happens we print a more meaningful message
clarifying that the problem is the MMIO access, not forcewake
specifically.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-3-andi.shyti@linux.intel.com
We occasionally see the PCI device in a non-accessible state at the
point the driver is loaded. When this happens, all BAR accesses will
read back as 0xFFFFFFFF. Rather than reading registers and
misinterpreting their (invalid) values, let's specifically check for
0xFFFFFFFF in a register that cannot have that value to see if the
device is accessible.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-2-andi.shyti@linux.intel.com
atomic_t based reference counting, including refcount_t, uses
atomic_inc_not_zero() for acquiring a reference. atomic_inc_not_zero() is
implemented with a atomic_try_cmpxchg() loop. High contention of the
reference count leads to retry loops and scales badly. There is nothing to
improve on this implementation as the semantics have to be preserved.
Provide rcuref as a scalable alternative solution which is suitable for RCU
managed objects. Similar to refcount_t it comes with overflow and underflow
detection and mitigation.
rcuref treats the underlying atomic_t as an unsigned integer and partitions
this space into zones:
0x00000000 - 0x7FFFFFFF valid zone (1 .. (INT_MAX + 1) references)
0x80000000 - 0xBFFFFFFF saturation zone
0xC0000000 - 0xFFFFFFFE dead zone
0xFFFFFFFF no reference
rcuref_get() unconditionally increments the reference count with
atomic_add_negative_relaxed(). rcuref_put() unconditionally decrements the
reference count with atomic_add_negative_release().
This unconditional increment avoids the inc_not_zero() problem, but
requires a more complex implementation on the put() side when the count
drops from 0 to -1.
When this transition is detected then it is attempted to mark the reference
count dead, by setting it to the midpoint of the dead zone with a single
atomic_cmpxchg_release() operation. This operation can fail due to a
concurrent rcuref_get() elevating the reference count from -1 to 0 again.
If the unconditional increment in rcuref_get() hits a reference count which
is marked dead (or saturated) it will detect it after the fact and bring
back the reference count to the midpoint of the respective zone. The zones
provide enough tolerance which makes it practically impossible to escape
from a zone.
The racy implementation of rcuref_put() requires to protect rcuref_put()
against a grace period ending in order to prevent a subtle use after
free. As RCU is the only mechanism which allows to protect against that, it
is not possible to fully replace the atomic_inc_not_zero() based
implementation of refcount_t with this scheme.
The final drop is slightly more expensive than the atomic_dec_return()
counterpart, but that's not the case which this is optimized for. The
optimization is on the high frequeunt get()/put() pairs and their
scalability.
The performance of an uncontended rcuref_get()/put() pair where the put()
is not dropping the last reference is still on par with the plain atomic
operations, while at the same time providing overflow and underflow
detection and mitigation.
The performance of rcuref compared to plain atomic_inc_not_zero() and
atomic_dec_return() based reference counting under contention:
- Micro benchmark: All CPUs running a increment/decrement loop on an
elevated reference count, which means the 0 to -1 transition never
happens.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.3X to 4.7X
- Conversion of dst_entry::__refcnt to rcuref and testing with the
localhost memtier/memcached benchmark. That benchmark shows the
reference count contention prominently.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.1X to 2.6X over the
previous fix for the false sharing issue vs. struct
dst_entry::__refcnt.
When memtier is run over a real 1Gb network connection, there is a
small gain on top of the false sharing fix. The two changes combined
result in a 2%-5% total gain for that networked test.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230323102800.158429195@linutronix.de
atomic_add_negative() does not provide the relaxed/acquire/release
variants.
Provide them in preparation for a new scalable reference count algorithm.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230323102800.101763813@linutronix.de
"simple-panel" compatible is not documented and nothing in Linux kernel
binds to it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.
Also, Wang says:
I can confirm there's currently no speculation barrier equivalent
on LonogArch. (Loongson says there are builtin mitigations for
Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
exploits to mips/LoongArch have all failed a few years ago.)
Without this patch:
$ ./bpf_prog02
[...]
bpf_common.c:123: TBROK: Failed verification: ??? (524)
[...]
Summary:
passed 0
failed 0
broken 1
skipped 0
warnings 0
With this patch:
$ ./bpf_prog02
[...]
Summary:
passed 0
failed 0
broken 0
skipped 0
warnings 0
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: WANG Xuerui <git@xen0n.name>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230328071335.2664966-1-guodongtai@kylinos.cn
While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.
Fixes: 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230328004232.2134233-1-martin.lau@linux.dev
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170222.4107746-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This was not matched anywhere and provides no additional information. The
driver code already checks also for "ti,omap3630" compatible.
Signed-off-by: Andrew Davis <afd@ti.com>
Message-Id: <20230216153339.19987-2-afd@ti.com>
[tony@atomide.com: updated comments for ti,omap3630 compatible]
Signed-off-by: Tony Lindgren <tony@atomide.com>
To determine whether the guest has caused an external interruption loop
upon code 20 (external interrupt) intercepts, the ext_new_psw needs to
be inspected to see whether external interrupts are enabled.
Under non-PV, ext_new_psw can simply be taken from guest lowcore. Under
PV, KVM can only access the encrypted guest lowcore and hence the
ext_new_psw must not be taken from guest lowcore.
handle_external_interrupt() incorrectly did that and hence was not able
to reliably tell whether an external interruption loop is happening or
not. False negatives cause spurious failures of my kvm-unit-test
for extint loops[1] under PV.
Since code 20 is only caused under PV if and only if the guest's
ext_new_psw is enabled for external interrupts, false positive detection
of a external interruption loop can not happen.
Fix this issue by instead looking at the guest PSW in the state
description. Since the PSW swap for external interrupt is done by the
ultravisor before the intercept is caused, this reliably tells whether
the guest is enabled for external interrupts in the ext_new_psw.
Also update the comments to explain better what is happening.
[1] https://lore.kernel.org/kvm/20220812062151.1980937-4-nrb@linux.ibm.com/
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: 201ae986ea ("KVM: s390: protvirt: Implement interrupt injection")
Link: https://lore.kernel.org/r/20230213085520.100756-2-nrb@linux.ibm.com
Message-Id: <20230213085520.100756-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The clocks and clock-names are not documented and not used, drop them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
disable-over-current is for chipidea IP, i.MX8MQ use dwc3, this property
is not valid. Drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
disable-over-current is for chipidea IP, i.MX8MQ use dwc3, this property
is not valid. Drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With ISO 15765-2:2016 the PDU size is not limited to 2^12 - 1 (4095)
bytes but can be represented as a 32 bit unsigned integer value which
allows 2^32 - 1 bytes (~4GB). The use-cases like automotive unified
diagnostic services (UDS) and flashing of ECUs still use the small
static buffers which are provided at socket creation time.
When a use-case requires to transfer PDUs up to 1025 kByte the maximum
PDU size can now be extended by setting the module parameter
max_pdu_size. The extended size buffers are only allocated on a
per-socket/connection base when needed at run-time.
changes since v2: https://lore.kernel.org/all/20230313172510.3851-1-socketcan@hartkopp.net
- use ARRAY_SIZE() to reference DEFAULT_MAX_PDU_SIZE only at one place
changes since v1: https://lore.kernel.org/all/20230311143446.3183-1-socketcan@hartkopp.net
- limit the minimum 'max_pdu_size' to 4095 to maintain the classic
behavior before ISO 15765-2:2016
Link: https://github.com/raspberrypi/linux/issues/5371
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230326115911.15094-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The class_unregister() and class_destroy() function should be taking a
const * to struct class, not just a *, so fix that up.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230325084526.3622123-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
changed to use bus_get_dev_root() but didn't consider that the function
can fail and return an uninitialized value of ret (hint, the function
can never fail, but the compiler doesn't know that.)
Fix this up by setting ret to -EINVAL just in case something really goes
wrong with the call to bus_get_dev_root().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303280045.4oaaezcn-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230327181606.1424846-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kzalloc(...) rather than kcalloc(1, ...) because the number of
elements we are specifying in this case is 1, so kzalloc would
accomplish the same thing and we can simplify.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Message-Id: <20220809072050.1733996-1-klee33@uw.edu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Return the value amx3_common_init() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Message-Id: <20220920065113.215685-1-ye.xingchen@zte.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Delete the redundant word 'from'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Message-Id: <20220914084315.40165-1-yuanjilin@cdjrlc.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit d42f265a5d ("ARM: OMAP3: clock: remove un-used core dpll
re-program code") removes arch/arm/mach-omap2/sram34xx.S, which
implemented the effect of the config OMAP3_SDRC_AC_TIMING. Since then, the
OMAP3_SDRC_AC_TIMING config was hanging around without effect.
Remove this obsolete config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Message-Id: <20230320083806.9545-1-lukas.bulwahn@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
register_sysctl_paths() is only needed if your child (directories) have
entries but this does not so just use register_sysctl() so to do away
with the path specification.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230302202826.776286-10-mcgrof@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
This patch introduces a new helper function which can be used both in
lookups and in atomic_open operations by filesystems that want to handle
filename encryption and no-key dentries themselves.
The reason for this function to be used in atomic open is that this
operation can act as a lookup if handed a dentry that is negative. And in
this case we may need to set DCACHE_NOKEY_NAME.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
[ebiggers: improved the function comment, and moved the function to just
below __fscrypt_prepare_lookup()]
Link: https://lore.kernel.org/r/20230320220149.21863-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Double-free error in bpf_linker__free() was reported by James Hilliard.
The error is caused by miss-use of realloc() in extend_sec().
The error occurs when two files with empty sections of the same name
are linked:
- when first file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == NULL and dst_align_sz == 0;
- dst->raw_data is set to a special pointer to a memory block of
size zero;
- when second file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == <special pointer> and dst_align_sz == 0;
- realloc() "frees" dst->raw_data special pointer and returns NULL;
- extend_sec() exits with -ENOMEM, and the old dst->raw_data value
is preserved (it is now invalid);
- eventually, bpf_linker__free() attempts to free dst->raw_data again.
This patch fixes the bug by avoiding -ENOMEM exit for dst_align_sz == 0.
The fix was suggested by Andrii Nakryiko <andrii.nakryiko@gmail.com>.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/bpf/CADvTj4o7ZWUikKwNTwFq0O_AaX+46t_+Ca9gvWMYdWdRtTGeHQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230328004738.381898-3-eddyz87@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQhRSETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Ap9B/kB0/KPmJuPw8uhCcZV0LqzRHeitJU/
iTGCNX0yxE9k2MuBZJBdk/j1mis9aD0l1K3QAHz5kUNNE1i1LR6ljvbazjJBw/5/
jVPi4zUm1bvveMYLvL7bpin1wc4UsbGHaFAfSLENfPVkB8gHMWOCOMKbdqcJ/utk
bpTn6vW3YZRlw6wcKykig73lPKiVrBs5HDVKMFb40vhTtPZs41a9jNksupXOUgzL
4oQq97BeItzgOWrttocMnF68WA+8gYvS8d5Y85qr1cpEwfi4vbLHb063+TItZYfF
5JlueeoavQDwSnwH6bGuEIa/SzoGfOqrXlVg6Slse393RRrK8jTE2AoX
=CY8n
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-03-27
The first 2 patches by Geert Uytterhoeven add transceiver support and
improve the error messages in the rcar_canfd driver.
Cai Huoqing contributes 3 patches which remove a redundant call to
pci_clear_master() in the c_can, ctucanfd and kvaser_pciefd driver.
Frank Jungclaus's patch replaces the struct esd_usb_msg with a union
in the esd_usb driver to improve readability.
Markus Schneider-Pargmann contributes 5 patches to improve the
performance in the m_can driver, especially for SPI attached
controllers like the tcan4x5x.
* tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: Keep interrupts enabled during peripheral read
can: m_can: Disable unused interrupts
can: m_can: Remove double interrupt enable
can: m_can: Always acknowledge all interrupts
can: m_can: Remove repeated check for is_peripheral
can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union
can: kvaser_pciefd: Remove redundant pci_clear_master
can: ctucanfd: Remove redundant pci_clear_master
can: c_can: Remove redundant pci_clear_master
can: rcar_canfd: Improve error messages
can: rcar_canfd: Add transceiver support
====================
Link: https://lore.kernel.org/r/20230327073354.1003134-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin says:
====================
Add tx push buf len param to ethtool
This patchset adds a new sub-configuration to ethtool get/set queue
params (ethtool -g) called 'tx-push-buf-len'.
This configuration specifies the maximum number of bytes of a
transmitted packet a driver can push directly to the underlying
device ('push' mode). The motivation for pushing some of the bytes to
the device has the advantages of
- Allowing a smart device to take fast actions based on the packet's
header
- Reducing latency for small packets that can be copied completely into
the device
This new param is practically similar to tx-copybreak value that can be
set using ethtool's tunable but conceptually serves a different purpose.
While tx-copybreak is used to reduce the overhead of DMA mapping and
makes no sense to use if less than the whole segment gets copied,
tx-push-buf-len allows to improve performance by analyzing the packet's
data (usually headers) before performing the DMA operation.
The configuration can be queried and set using the commands:
$ ethtool -g [interface]
# ethtool -G [interface] tx-push-buf-len [number of bytes]
This patchset also adds support for the new configuration in ENA driver
for which this parameter ensures efficient resources management on the
device side.
====================
Link: https://lore.kernel.org/r/20230323163610.1281468-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LLQ is auto enabled by the device and disabling it isn't supported on
new ENA generations while on old ones causes sub-optimal performance.
This patch adds advertisement of push-mode when LLQ mode is used, but
rejects an attempt to modify it.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver allows for two distinct values for the number of bytes
of the packet's payload that can be written directly to the device.
For a value of 224 the driver turns on Large LLQ Header mode in which
the first 224 of the packet's payload are written to the LLQ.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the ability to modify LLQ entry size, the size of packet's
payload that can be written directly to the device changes.
This patch makes the driver recalculate this information every device
negotiation (also called device reset).
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow configuring the device with large LLQ headers. The Low Latency
Queue (LLQ) allows the driver to write the first N bytes of the packet,
along with the rest of the TX descriptors directly into device (N can be
either 96 or 224 for large LLQ headers configuration).
Having L4 TCP/UDP headers contained in the first 96 bytes of the packet
is required to get maximum performance from the device.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move ena_calc_io_queue_size() implementation closer to the file's
beginning so that it can be later called from ena_device_init()
function without adding a function declaration.
Also add an empty line at some spots to separate logical blocks in
funcitons.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to NL_SET_ERR_MSG_FMT, add a macro which sets netlink policy
error message with a format string.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQhjxcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6NMvB/4lJJXkoCMK6QVL3iJnEvgZKYtkDRC/
j5fktgLM4X6vbZTIpk+hlMGWLXVGgCa5JzuiOmchSwT2JlCBkD0MBQA7EZgQI4M4
JKLv93rIuI6t/AZMAmIMotB6Z/QqGH8NJl7UVdOFGv7Z/qzhjvQ9w7lP66KRtm4S
xgaPlgKk0MZbTH+rrmbCrUFlQPBvcak8EyNxpahjjfVplaR8U+AKSIeOghBlvwZZ
ohc52wWq2vRMr9Fzc4yAtYf7vJTD+1u5OlmJkpiB/yshCN/BTGJv12m8RlfvIliH
cNAJyfetLjtRjXGwilPw0wAJvldjpwy49JK9E5Z5jYOrtWaH5ade20l1
=p3JT
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-03-27
Oleksij Rempel and Hillf Danton contribute a patch for the CAN J1939
protocol that prevents a potential deadlock in j1939_sk_errqueue().
Ivan Orlov fixes an uninit-value in the CAN BCM protocol in the
bcm_tx_setup() function.
* tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write
can: j1939: prevent deadlock by moving j1939_sk_errqueue()
====================
Link: https://lore.kernel.org/r/20230327124807.1157134-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang with W=1 reports
drivers/net/ethernet/qlogic/qed/qed_ll2.c:649:6: error: variable
'num_ooo_add_to_peninsula' set but not used [-Werror,-Wunused-but-set-variable]
u32 num_ooo_add_to_peninsula = 0, cid;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230326001733.1343274-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some MAINTAINERS sections mention to mail patches to the list
linux-nfc@lists.01.org. Probably due to changes on Intel's 01.org website
and servers, the list server lists.01.org/ml01.01.org is simply gone.
Considering emails recorded on lore.kernel.org, only a handful of emails
where sent to the linux-nfc@lists.01.org list, and they are usually also
sent to the netdev mailing list as well, where they are then picked up.
So, there is no big benefit in restoring the linux-nfc elsewhere.
Remove all occurrences of the linux-nfc@lists.01.org list in MAINTAINERS.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/CAKXUXMzggxQ43DUZZRkPMGdo5WkzgA=i14ySJUFw4kZfE5ZaZA@mail.gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230324081613.32000-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I've read through or reworked a good portion of this driver. Add myself
as a reviewer.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/20230323145957.2999211-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, MAX_SKB_FRAGS value is 17.
For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg()
attempts order-3 allocations, stuffing 32768 bytes per frag.
But with zero copy, we use order-0 pages.
For BIG TCP to show its full potential, we add a config option
to be able to fit up to 45 segments per skb.
This is also needed for BIG TCP rx zerocopy, as zerocopy currently
does not support skbs with frag list.
We have used MAX_SKB_FRAGS=45 value for years at Google before
we deployed 4K MTU, with no adverse effect, other than
a recent issue in mlx4, fixed in commit 26782aad00
("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS")
Back then, goal was to be able to receive full size (64KB) GRO
packets without the frag_list overhead.
Note that /proc/sys/net/core/max_skb_frags can also be used to limit
the number of fragments TCP can use in tx packets.
By default we keep the old/legacy value of 17 until we get
more coverage for the updated values.
Sizes of struct skb_shared_info on 64bit arches
MAX_SKB_FRAGS | sizeof(struct skb_shared_info):
==============================================
17 320
21 320+64 = 384
25 320+128 = 448
29 320+192 = 512
33 320+256 = 576
37 320+320 = 640
41 320+384 = 704
45 320+448 = 768
This inflation might cause problems for drivers assuming they could pack
both the incoming packet (for MTU=1500) and skb_shared_info in half a page,
using build_skb().
v3: fix build error when CONFIG_NET=n
v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having the cacheline also printed on the debug_dma_dump_mappings() and
dump_show() is useful for debugging. Furthermore, this also standardizes
the messages shown on both dump functions.
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Small update on dma_debug_entry's struct commentary and also standardize
the usage of 'dma_addr' variable name from debug_dma_map_page() on
debug_dma_unmap_page(), and similarly on debug_dma_free_coherent()
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since both callers of dma_direct_optimal_gfp_mask() pass
dev->coherent_dma_mask as the second argument, it is better to
remove that parameter altogether.
Not only is reducing number of parameters good for readability, but
the new function signature is also more logical: The optimal flags
depend only on data contained in struct device.
While touching this code, let's also rename phys_mask to phys_limit
in dma_direct_alloc_from_pool(), because it is indeed a limit.
Signed-off-by: Petr Tesarik <petrtesarik@huaweicloud.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Compilation C=1 of the bpck6 protocol module generates the following
message:
drivers/ata/pata_parport/bpck6.c:62:5: warning: symbol 'mode_map' was
not declared. Should it be static?
Fix this by declaring mode_map as static.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Ondrej Zary <linux@zary.sk>
