Assert that both XTILE{CFG,DATA} are written and read back via XSETBV and
XGETBV respectively. The original check in amx_test only ensures at least
one of the XTILE bits are set, XTILECFG or XTILEDATA, when it really
should be checking that both are set.
Fixes: bf70636d94 ("selftest: kvm: Add amx selftest")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-11-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that XTILE is XSAVE-enabled. check_xsave_supports_xtile() doesn't
actually check anything since its return value is not used. Add the
intended assert.
Opportunistically, move the assert to a more appropriate location:
immediately after XSETBV and remove check_xsave_supports_xtile().
Fixes: 5dc19f1c7d ("KVM: selftests: Convert AMX test to use X86_PROPRETY_XXX")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-10-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add asserts to verify the XSTATE metadata for XTILE_DATA isn't affected
by disabling AMX tile data via IA32_XFD. XFD doesn't intercept XSAVE,
it only prevents setting bits in XCR0, i.e. regardless of XFD, AMX state
is managed by XSAVE/XRSTOR as long as the corresponding bits are set XCR0.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-9-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an extra check to IA32_XFD to ensure that XTILE_DATA is actually set,
i.e. is consistent with the AMX architecture. In addition, repeat the
checks after the guest/host world switch to ensure the values of IA32_XFD
and IA32_XFD_ERR are well preserved.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-7-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Be extra paranoid and assert that CR0.TS is clear when verifying the #NM
in the AMX test is due to the expected XFeature Disable error, i.e. that
the #NM isn't due to CR0.TS=1.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-6-mizhang@google.com
[sean: reword changelog to make it clear this is pure paranoia]
Signed-off-by: Sean Christopherson <seanjc@google.com>
After tilerelease instruction, AMX tiles are in INIT state. According to
Intel SDM vol 1. 13.10: "If RFBM[i] = 1, XSTATE_BV[i] is set to the
value of XINUSE[i].", XSTATE_BV[18] should be cleared after xsavec.
On the other hand, according to Intel SDM vol 1. 13.4.3: "If XCOMP_BV[i] =
1, state component i is located at a byte offset locationI from the base
address of the XSAVE area". Since at the time of xsavec, XCR0[18] is set
indicating AMX tile data component is still enabled, xcomp_bv[18] should be
set.
Complete the checks by adding the assert to xcomp_bv[18] after xsavec.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-5-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
After the execution of __tilerelease(), AMX component will be in INIT
state. Therefore, execution of XSAVEC saving the AMX state into memory will
cause the xstate_bv[18] cleared in xheader. However, the xcomp_bv[18] will
remain set. Fix the error in comment. Also, update xsavec() to XSAVEC
because xcomp_bv[18] is set due to the instruction, not the function.
Finally, use XTILEDATA instead 'bit 18' in comments.
Cc: Jim Mattson <jmattson@google.com>
Cc: Venkatesh Srinivas <venkateshs@google.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-4-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a working xstate data structure for the usage of AMX and potential
future usage on other xstate components. AMX selftest requires checking
both the xstate_bv and xcomp_bv. Existing code relies on pointer
arithmetics to fetch xstate_bv and does not support xcomp_bv.
So, add a working xstate data structure into processor.h for x86.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is a 'malloc' call in vcpu_save_state function, which can
be unsuccessful. This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230322144528.704077-1-ivan.orlov0322@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Align the guest stack to match calling sequence requirements in
section "The Stack Frame" of the System V ABI AMD64 Architecture
Processor Supplement, which requires the value (%rsp + 8), NOT %rsp,
to be a multiple of 16 when control is transferred to the function
entry point. I.e. in a normal function call, %rsp needs to be 16-byte
aligned _before_ CALL, not after.
This fixes unexpected #GPs in guest code when the compiler uses SSE
instructions, e.g. to initialize memory, as many SSE instructions
require memory operands (including those on the stack) to be
16-byte-aligned.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20230227180601.104318-1-ackerleytng@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
target flag (initially added to allow swap to dm-crypt) to throttle
the amount of outstanding swap bios.
- Fix DM crypt soft lockup warnings by calling cond_resched() from the
cpu intensive loop in dmcrypt_write().
- Fix DM crypt to not access an uninitialized tasklet. This fix allows
for consistent handling of IO completion, by _not_ needlessly punting
to a workqueue when tasklets are not needed.
- Fix DM core's alloc_dev() initialization for DM stats to check for
and propagate alloc_percpu() failure.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmQd2p0ACgkQxSPxCi2d
A1qvXAf/WCMNXRbFhO35QqukBqS7sUOMfWl1hIEdABRu+3Ul1KHBWzXVYWuWgebw
kr79V3LZG63cLvhreCy64X/0tXLZa0c0AGWZI6rJ/QAozSCs9R8BqOrJnB5GT1o9
/lvmOL31MloMnIKArWseIQViNM97gEHmFpuj0saqitcvNTjjipzxq/wOyhmDQwnE
8rxJpKSHBJXs9X/VyM9FTWxtijTQw3c8wxJJo7eV6TTuLyrErm46tyI1cBQ4vDoa
ogMVWVrf51uTsqL6DqGenDc+kO7CH5lipIJij1bTtKgs3aBNlaiZQC1nPkMST9Ue
hpH61ixAg+bsWi4/xLFafCl6QAGMlA==
=71ya
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
target flag (initially added to allow swap to dm-crypt) to throttle
the amount of outstanding swap bios.
- Fix DM crypt soft lockup warnings by calling cond_resched() from the
cpu intensive loop in dmcrypt_write().
- Fix DM crypt to not access an uninitialized tasklet. This fix allows
for consistent handling of IO completion, by _not_ needlessly punting
to a workqueue when tasklets are not needed.
- Fix DM core's alloc_dev() initialization for DM stats to check for
and propagate alloc_percpu() failure.
* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm stats: check for and propagate alloc_percpu failure
dm crypt: avoid accessing uninitialized tasklet
dm crypt: add cond_resched() to dmcrypt_write()
dm thin: fix deadlock when swapping to thin device
Running x86_64/pmu_event_filter_test or x86_64/vmx_pmu_caps_test
with enable_pmu globally disabled will report the following into:
1..0 # SKIP - Requirement not met: use_intel_pmu() || use_amd_pmu()
or
1..0 # SKIP - Requirement not met: kvm_cpu_has(X86_FEATURE_PDCM)
this can be confusing, so add a check on kvm.enable_pmu.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230313085311.25327-3-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=7EVo
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Send Identify with CNS 06h only to I/O controllers (Martin
George)
- Fix nvme_tcp_term_pdu to match spec (Caleb Sander)
- Pass in issue_flags for uring_cmd, so the end_io handlers don't need
to assume what the right context is (me)
- Fix for ublk, marking it as LIVE before adding it to avoid races on
the initial IO (Ming)
* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers
block/io_uring: pass in issue_flags for uring_cmd task_work handling
block: ublk_drv: mark device as LIVE before adding disk
-----BEGIN PGP SIGNATURE-----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=VjlK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix an issue with repeated -ECONNREFUSED on a socket (me)
- Fix a NULL pointer deference due to a stale lookup cache for
allocating direct descriptors (Savino)
* tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux:
io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
io_uring/net: avoid sending -ECONNABORTED on repeated connection requests
Zero-length arrays as fake flexible arrays are deprecated and we are moving
towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and -fstrict-flex-arrays=3
enabled:
CC drivers/target/target_core_user.o
drivers/target/target_core_user.c: In function ‘queue_cmd_ring’:
drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=]
1096 | iov = &entry->req.iov[0];
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/target/target_core_user.c:31:
./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’
122 | struct iovec iov[0];
| ^~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/270
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel).
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----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=aBq5
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
Merge series from Maxime Chevallier <maxime.chevallier@bootlin.com>:
This introduces a helper that factors out register rewriting, it
will be the basis for further work that will need cross tree
merges so is on a branch.
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
The patches convert riscv to use the generic entry infrastructure from
kernel/entry/*. Some optimization for entry.S with new .macro and merge
ret_from_kernel_thread into ret_from_fork.
* b4-shazam-merge:
riscv: entry: Consolidate general regs saving/restoring
riscv: entry: Consolidate ret_from_kernel_thread into ret_from_fork
riscv: entry: Remove extra level wrappers of trace_hardirqs_{on,off}
riscv: entry: Convert to generic entry
riscv: entry: Add noinstr to prevent instrumentation inserted
riscv: ptrace: Remove duplicate operation
Link: https://lore.kernel.org/r/20230222033021.983168-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At some point in between sending this patch to the list and merging it
into for-next, the tracepoints got all mixed up because I've
over-reliant on automated tools not sucking. The end result is that the
tracepoints are all wrong, so fix them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Commit f22f9aaf6c ("selinux: remove the runtime disable functionality")
removes the config SECURITY_SELINUX_DISABLE. This results in some dead code
in lsm_hooks.h.
Remove this dead code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch fixes a mistake in checking NULL instead of
checking IS_ERR for the bpf_map_get() return value.
It also fixes the return value in link_update_map() from -EINVAL
to PTR_ERR(*_map).
Reported-by: syzbot+71ccc0fe37abb458406b@syzkaller.appspotmail.com
Fixes: 68b04864ca ("bpf: Create links for BPF struct_ops maps.")
Fixes: aef56f2e91 ("bpf: Update the struct_ops of a bpf_link.")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230324184241.1387437-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding. Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).
Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().
This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.
Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().
Fixes: e4029e0726 ("cifs: find and use the dentry for cached non-root directories also")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Performance tests with large number of threads noted that the change
of the default closetimeo (deferred close timeout between when
close is done by application and when client has to send the close
to the server), to 5 seconds from 1 second, significantly degraded
perf in some cases like this (in the filebench example reported,
the stats show close requests on the wire taking twice as long,
and 50% regression in filebench perf). This is stil configurable
via mount parm closetimeo, but to be safe, decrease default back
to its previous value of 1 second.
Reported-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/lkml/997614df-10d4-af53-9571-edec36b0e2f3@intel.com/
Fixes: 5efdd9122e ("smb3: allow deferred close timeout to be configurable")
Cc: stable@vger.kernel.org # 6.0+
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure to unload_nls() @nls_codepage if we no longer need it.
Fixes: bc962159e8 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Link: https://lore.kernel.org/r/20230320233823.2919475-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Register addresses passed to regmap operations can be offset with
regmap.reg_base and downshifted with regmap.reg_downshift.
Add a helper to apply both these operations and return the translated
address, that we can then use to perform the actual register operation
ont the underlying bus.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20230324093644.464704-2-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drm-misc-next for v6.4-rc1:
Core Changes:
- Add unit test for xrgb8888 to mono.
- Assorted small fixes to format helper selftests.
- Assorted documentation updates.
- Drop drm_dev_set_unique.
- Always use shadow buffer in generic fbdev emulation helpers, and
improve error handling.
Driver Changes:
- Assorted small fixes to malidp, hdlcd, gma500, lima, bridge, rockchip.
- Move fbdev in gma500 to use drm_client.
- Convert bridge platform callbacks to void return.
- Drop leftover from vgem to shmem helper conversion.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a4c438e-7047-c044-fc77-5a3597000264@linux.intel.com
already_uses() is unnecessarily chatty.
`modprobe i915` yields 491 messages like:
[ 64.108744] i915 uses drm!
This is a normal situation, and isn't worth all the log entries.
NOTE: I've preserved the "does not use %s" messages, which happens
less often, but does happen. Its not clear to me what it tells a
reader, or what info might improve the pr_debug's utility.
[ 6847.584999] main:already_uses:569: amdgpu does not use ttm!
[ 6847.585001] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585014] main:already_uses:569: amdgpu does not use drm!
[ 6847.585016] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585024] main:already_uses:569: amdgpu does not use drm_display_helper!
[ 6847.585025] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585084] main:already_uses:569: amdgpu does not use drm_kms_helper!
[ 6847.585086] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585175] main:already_uses:569: amdgpu does not use drm_buddy!
[ 6847.585176] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585202] main:already_uses:569: amdgpu does not use i2c_algo_bit!
[ 6847.585204] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585249] main:already_uses:569: amdgpu does not use gpu_sched!
[ 6847.585250] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585314] main:already_uses:569: amdgpu does not use video!
[ 6847.585315] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585409] main:already_uses:569: amdgpu does not use iommu_v2!
[ 6847.585410] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6847.585816] main:already_uses:569: amdgpu does not use drm_ttm_helper!
[ 6847.585818] main:add_module_usage:584: Allocating new usage for amdgpu.
[ 6848.762268] dyndbg: add-module: amdgpu.2533 sites
no functional changes.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
move_module() pr_debug's "Final section addresses for $modname".
Add section addresses to the message, for anyone looking at these.
no functional changes.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The pr_debug("Absolute symbol" ..) reports value, (which is usually
0), but not the name, which is more informative. So add it.
no functional changes
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
layout_sections() and move_module() each issue ~50 messages for each
module loaded. Add mod-name into their 2 header lines, to help the
reader find his module.
no functional changes.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The kernel/kmod.c is already only built if we enabled modules, so
just stuff it under kernel/module/kmod.c and unify the MAINTAINERS
file for it.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The setup_load_info() was actually had ELF validation checks of its
own. To later cache useful variables as an secondary step just means
looping again over the ELF sections we just validated. We can simply
keep tabs of the key sections of interest as we validate the module
ELF section in one swoop, so do that and merge the two routines
together.
Expand a bit on the documentation / intent / goals.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The symbol and strings section validation currently happen in
setup_load_info() but since they are also doing validity checks
move this to elf_validity_check().
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The integrity of the struct module we load is important, and although
our ELF validator already checks that the module section must match
struct module, add a stop-gap check before we memcpy() the final minted
module. This also makes those inspecting the code what the goal is.
While at it, clarify the goal behind updating the sh_addr address.
The current comment is pretty misleading.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The ELF ".gnu.linkonce.this_module" section is special, it is what we
use to construct the struct module __this_module, which THIS_MODULE
points to. When userspace loads a module we always deal first with a
copy of the userspace buffer, and twiddle with the userspace copy's
version of the struct module. Eventually we allocate memory to do a
memcpy() of that struct module, under the assumption that the module
size is right. But we have no validity checks against the size or
the requirements for the section.
Add some validity checks for the special module section early and while
at it, cache the module section index early, so we don't have to do that
later.
While at it, just move over the assigment of the info->mod to make the
code clearer. The validity checker also adds an explicit size check to
ensure the module section size matches the kernel's run time size for
sizeof(struct module). This should prevent sloppy loads of modules
which are built today *without* actually increasing the size of
the struct module. A developer today can for example expand the size
of struct module, rebuild a directoroy 'make fs/xfs/' for example and
then try to insmode the driver there. That module would in effect have
an incorrect size. This new size check would put a stop gap against such
mistakes.
This also makes the entire goal of ".gnu.linkonce.this_module" pretty
clear. Before this patch verification of the goal / intent required some
Indian Jones whips, torches and cleaning up big old spider webs.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Converge on a compromise: so long as we have a module hit our linked
list of modules we taint. That is, the module was about to become live.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
It is silly to have taints spread out all over, we can just compromise
and add them if the module ever hit our linked list. Our sanity checkers
should just prevent crappy drivers / bogus ELF modules / etc and kconfig
options should be enough to let you *not* load things you don't want.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
check_modinfo() actually does two things:
a) sanity checks, some of which are fatal, and so we
prevent the user from completing trying to load a module
b) taints the kernel
The taints are pretty heavy handed because we're tainting the kernel
*before* we ever even get to load the module into the modules linked
list. That is, it it can fail for other reasons later as we review the
module's structure.
But this commit makes no functional changes, it just makes the intent
clearer and splits the code up where needed to make that happen.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The work to taint the kernel due to a module should be split
up eventually. To aid with this, split up the tainting on
check_modinfo_livepatch().
This let's us bring more early checks together which do return
a value, and makes changes easier to read later where we stuff
all the work to do the taints in one single routine.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The set_license() routine would seem to a reader to do some sort of
setting, but it does not. It just adds a taint if the license is
not set or proprietary.
This makes what the code is doing clearer, so much we can remove
the comment about it.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
