"modprobe asix ; rmmod asix ; modprobe asix" fails with:
sysfs: cannot create duplicate filename \
'/devices/virtual/mdio_bus/usb-003:004'
Issue was originally reported by Anton Lundin on 2022-06-22 (link below).
Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.
The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.
The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.
Fixes: 7e074d5a76 ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patches are an outcome of Raed's work to add packet
offload support to libreswan [1].
The series includes:
* Priority support to IPsec policies
* Statistics per-SA (visible through "ip -s xfrm state ..." command)
* Support to IKE policy holes
* Fine tuning to acquire logic.
Thanks
[1] https://github.com/libreswan/libreswan/pull/986
Link: https://lore.kernel.org/all/cover.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCZBgoggAKCRAp8NhrnBAZ
sQPvAP4/muXSlz26gU632wL+wjpFkvM5fX1iu8AwmdhOtX+gAAD/edtCVXj4QxD4
0xGMjwrz4tH5WqdUzqDQjhZrBYNWmAk=
=oNEQ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-libreswan-mlx5' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
Extend packet offload to fully support libreswan
The following patches are an outcome of Raed's work to add packet
offload support to libreswan [1].
The series includes:
* Priority support to IPsec policies
* Statistics per-SA (visible through "ip -s xfrm state ..." command)
* Support to IKE policy holes
* Fine tuning to acquire logic.
[1] https://github.com/libreswan/libreswan/pull/986
Link: https://lore.kernel.org/all/cover.1678714336.git.leon@kernel.org
* tag 'ipsec-libreswan-mlx5' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Update IPsec per SA packets/bytes count
net/mlx5e: Use one rule to count all IPsec Tx offloaded traffic
net/mlx5e: Support IPsec acquire default SA
net/mlx5e: Allow policies with reqid 0, to support IKE policy holes
xfrm: copy_to_user_state fetch offloaded SA packets/bytes statistics
xfrm: add new device offload acquire flag
net/mlx5e: Use chains for IPsec policy priority offload
net/mlx5: fs_core: Allow ignore_flow_level on TX dest
net/mlx5: fs_chains: Refactor to detach chains from tc usage
====================
Link: https://lore.kernel.org/r/20230320094722.1009304-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for bindings/net/can
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # for bindings/net/toshiba,visconti-dwmac.yaml
Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Link: https://lore.kernel.org/r/20230320233758.2918972-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Álvaro Fernández Rojas says:
====================
net: dsa: b53: configure 6318 and 63268 RGMII ports
BCM6318 and BCM63268 need special configuration for their RGMII ports, so we
need to be able to identify them as a special BCM63xx switch.
In the meantime, let's add some missing BCM63xx SoCs to B53 MMAP device table.
This should be applied after "net: dsa: b53: add support for BCM63xx RGMIIs":
https://patchwork.kernel.org/project/netdevbpf/patch/20230319220805.124024-1-noltari@gmail.com/
Álvaro Fernández Rojas (4):
dt-bindings: net: dsa: b53: add more 63xx SoCs
net: dsa: b53: mmap: add more 63xx SoCs
net: dsa: b53: mmap: allow passing a chip ID
net: dsa: b53: add BCM63268 RGMII configuration
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 3 ++
drivers/net/dsa/b53/b53_common.c | 19 +++++++++++-
drivers/net/dsa/b53/b53_mmap.c | 29 +++++++++++++++----
drivers/net/dsa/b53/b53_priv.h | 9 +++++-
drivers/net/dsa/b53/b53_regs.h | 1 +
5 files changed, 53 insertions(+), 8 deletions(-)
====================
Link: https://lore.kernel.org/r/20230321173359.251778-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM6318 and BCM63268 SoCs require a special handling for their RGMIIs, so we
should be able to identify them as a special BCM63xx switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM6318, BCM6362 and BCM63268 are SoCs with a B53 MMAP switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM6318, BCM6362 and BCM63268 are SoCs with a B53 MMAP switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coverity had rightly indicated a possible deadlock
due to chan_lock being done inside match_session.
All callers of match_* functions should pick up the
necessary locks and call them.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Fixes: 724244cdb3 ("cifs: protect session channel fields with chan_lock")
Signed-off-by: Steve French <stfrench@microsoft.com>
phy_disconnect() calls phy_detach() which already clears 'phydev' if it
is attached to a struct net_device.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230321131745.27688-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi says:
====================
bnxt PTP optimizations
Patches to
1. Enforce software based freq adjustments only on shared PHC NIC
2. A prerequisite change to expand capability storage field to
accommodate more Firmware reported capabilities
====================
Link: https://lore.kernel.org/r/20230321144449.15289-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently driver performs software based frequency adjustments
when RTC capability is not discovered or when in shared PHC mode.
But there may be some old firmware versions that still support
hardware freq adjustments without RTC capability being exposed.
In this situation driver will use non-realtime mode even on single
host NICs.
Hence enforce software frequency adjustments only when running in
shared PHC mode. Make suitable changes for cyclecounter for the
same.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver uses the flag BNXT_FLAG_MULTI_HOST to determine whether
to use non-realtime mode PHC when running on a multi host NIC.
However when ptp initializes on a NIC with shared PHC, we still
don't have this flag set yet because HWRM_FUNC_QCFG is issued
much later.
Move the ptp initialization code after we have issued func_qcfg.
The next patch will use the BNXT_FLAG_MULTI_HOST flag during PTP
initialization.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current fw_cap field (u32) has run out of bits to save any
new capability.
Change the field to u64.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.
Fixes: 4e4480e89c ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running "ethtool -S eno0 --groups rmon" without an explicit "--src
emac|pmac" argument, the kernel will not report
rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets,
etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not
populate the "ranges" argument.
ocelot_port_get_rmon_stats() does things differently and things work
there. I had forgotten to make sure that the code is structured the same
way in both drivers, so do that now.
Fixes: cf52bd238b ("net: enetc: add support for MAC Merge statistics counters")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reverse error handling conditions to reduce code indents in bpck6_open.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move all register definitions and mode_map to bpck6.c
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_wr_data_byte to bpck6.c and rename it to bpck6_wr_data_byte
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_rd_data_byte to bpck6.c and rename it to bpck6_rd_data_byte
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_send_cmd to bpck6.c and rename it to bpck6_send_cmd
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_deselect to bpck6.c and rename it to bpck6_deselect
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_select is only called by bpck6_open. Merge ppc6_select into
bpck6_open.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_open to bpck6.c and rename it to bpck6_open
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_wr_extout to bpck6.c and rename it to bpck6_wr_extout
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move ppc6_wait_for_fifo to bpck6.c and rename it to bpck6_wait_for_fifo
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_wr_data_blk is only called by bpck6_write_block. Merge
ppc6_wr_data_blk into bpck6_write_block.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_rd_data_blk is only called by bpck6_read_block. Merge
ppc6_rd_data_blk into bpck6_read_block.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_wr_port16_blk is only called by bpck6_write_block. Merge
ppc6_wr_port16_blk into bpck6_write_block.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_rd_port16_blk is only called by bpck6_read_block. Merge
ppc6_rd_port16_blk into bpck6_read_block.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_wr_port is only called by bpck6_write_regr. Merge ppc6_wr_port
into bpck6_write_regr.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_rd_port is only called by bpck6_read_regr. Merge ppc6_rd_port
into bpck6_read_regr.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc6_close does not do anything except calling ppc6_deselect. Remove
ppc6_close and call ppc6_deselect directly.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
pi->private is now not used for any other purpose, so store wait_fifo
flag directly there and remove PPC_FLAGS define.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use parport_frob_control instead of manually maintaining control
register state.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use parport access functions instead of inb/outb/inw/outw/inl/outl.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data
read/write (insl/outsl).
Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw
and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST).
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Remove port_stb, port_afd, cmd_stb, port_init, data_stb and port_sel
defines and use standard PARPORT_CONTROL_* instead.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Store the remaining two variables (cur_ctrl and ppc_flags) in struct
ppc_storage directly in pi->private and remove struct ppc_storage.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
introduce mode_map[] that maps bpck6 modes to ppc6 modes and use it to
replace mode in ppc_storage
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
org_data duplicates saved_r0 and org_ctrl duplicates saved_r2 in
pi->unit. Remove them.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ppc_id duplicates pi->unit. Remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
lpt_addr duplicates pi->port. Remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Remove Interface typedef, pass around struct pi_adapter * down to all
functions instead. Remove PPCSTRUCT define.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
pi->pardev is struct pardevice *, no need to cast it to the same type.
Also clean up the return mess.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
bpck6_read_regr() and bpck6_write_regr() check values of cont and reg
but there's no point in doing that. They can only be called with
a fixed set of values. Remove the checks.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Almost all the ATAPI_ defines are unused. Remove them and use
ATA_REG_DATA instead of ATAPI_DATA.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
