commit 3d20f7a6eb upstream.
Take into account the virq offset when translating cascaded interrupts.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2601b8d8f upstream.
Take into account the virq offset when translating cascaded IRL
interrupts.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab8aa4f095 upstream.
When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.
Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7eb1e47696 upstream.
Making 'blk' sector_t (i.e. 64 bit if LBD support is active) fails the
'blk>0' test in the partition block loop if a value of (signed int) -1 is
used to mark the end of the partition block list.
Explicitly cast 'blk' to signed int to allow use of -1 to terminate the
partition block linked list.
Fixes: b6f3f28f60 ("block: add overflow checks for Amiga partition support")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/024ce4fa-cc6d-50a2-9aae-3701d0ebf668@xenosoft.de
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a796565ce upstream.
I observed poor performance of io_uring compared to synchronous IO. That
turns out to be caused by deeper CPU idle states entered with io_uring,
due to io_uring using plain schedule(), whereas synchronous IO uses
io_schedule().
The losses due to this are substantial. On my cascade lake workstation,
t/io_uring from the fio repository e.g. yields regressions between 20%
and 40% with the following command:
./t/io_uring -r 5 -X0 -d 1 -s 1 -c 1 -p 0 -S$use_sync -R 0 /mnt/t2/fio/write.0.0
This is repeatable with different filesystems, using raw block devices
and using different block devices.
Use io_schedule_prepare() / io_schedule_finish() in
io_cqring_wait_schedule() to address the difference.
After that using io_uring is on par or surpassing synchronous IO (using
registered files etc makes it reliably win, but arguably is a less fair
comparison).
There are other calls to schedule() in io_uring/, but none immediately
jump out to be similarly situated, so I did not touch them. Similarly,
it's possible that mutex_lock_io() should be used, but it's not clear if
there are cases where that matters.
Cc: stable@vger.kernel.org # 5.10+
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: io-uring@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: https://lore.kernel.org/r/20230707162007.194068-1-andres@anarazel.de
[axboe: minor style fixup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f58d0a9b4c upstream.
Packets bound for peers can queue up prior to the device private key
being set. For example, if persistent keepalive is set, a packet is
queued up to be sent as soon as the device comes up. However, if the
private key hasn't been set yet, the handshake message never sends, and
no timer is armed to retry, since that would be pointless.
But, if a user later sets a private key, the expectation is that those
queued packets, such as a persistent keepalive, are actually sent. So
adjust the configuration logic to account for this edge case, and add a
test case to make sure this works.
Maxim noticed this with a wg-quick(8) config to the tune of:
[Interface]
PostUp = wg set %i private-key somefile
[Peer]
PublicKey = ...
Endpoint = ...
PersistentKeepalive = 25
Here, the private key gets set after the device comes up using a PostUp
script, triggering the bug.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Tested-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7387943fa3 upstream.
Using `% nr_cpumask_bits` is slow and complicated, and not totally
robust toward dynamic changes to CPU topologies. Rather than storing the
next CPU in the round-robin, just store the last one, and also return
that value. This simplifies the loop drastically into a much more common
pattern.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Manuel Leiner <manuel.leiner@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6eef7a2b93 upstream.
If nf_conntrack_init_start() fails (for example due to a
register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()
clean-up path frees the nf_ct_helper_hash map.
When built with NF_CONNTRACK=y, further netfilter modules (e.g:
netfilter_conntrack_ftp) can still be loaded and call
nf_conntrack_helpers_register(), independently of whether nf_conntrack
initialized correctly. This accesses the nf_ct_helper_hash dangling
pointer and causes a uaf, possibly leading to random memory corruption.
This patch guards nf_conntrack_helper_register() from accessing a freed
or uninitialized nf_ct_helper_hash pointer and fixes possible
uses-after-free when loading a conntrack module.
Cc: stable@vger.kernel.org
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5df16d942 upstream
The wptr needs to be incremented at at least 64 dword intervals,
use 256 to align with windows. This should fix potential hangs
with unaligned updates.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd21987274 upstream
Also, correct the comment for NAVI10_PCIE__LC_L1_INACTIVITY_TBT_DEFAULT
as 0x0000000E stands for 400ms instead of 4ms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef3c36a6e0 upstream
Only low priority rings are using chunks to save the offset.
Bypass the mark offset callings from high priority rings.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ef3c36a6e0)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca0b954a43 upstream
It's perfectly possible that the BO is about to be destroyed and doesn't
have a backing store associated with it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2ad8e2df4 upstream.
We need to grab the lock of the BO or otherwise can run into a crash
when we try to inspect the current location.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ddc7a3794 upstream.
This is a port of commit 08f6554ff9 ("mips: Include KBUILD_CPPFLAGS in
CHECKFLAGS invocation") to arch/loongarch, for fixing cross-compilation
of Linux/LoongArch with Clang, where previously the `--target` flag
would no longer be present for the CHECKFLAGS cc invocation leading to
build failure.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2dd05f107 upstream.
Let helper ovl_i_path_real() return the realinode to prepare for
checking non-null realinode in RCU walking path.
[msz] Use d_inode_rcu() since we are depending on the consitency
between dentry and inode being non-NULL in an RCU setting.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: ffa5723c6d ("ovl: store lower path in ovl_inode")
Cc: <stable@vger.kernel.org> # v5.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb843a469 upstream.
When preprocessing arch/*/kernel/vmlinux.lds.S, the target triple is
not passed to $(CPP) because we add it only to KBUILD_{C,A}FLAGS.
As a result, the linker script is preprocessed with predefined macros
for the build host instead of the target.
Assuming you use an x86 build machine, compare the following:
$ clang -dM -E -x c /dev/null
$ clang -dM -E -x c /dev/null -target aarch64-linux-gnu
There is no actual problem presumably because our linker scripts do not
rely on such predefined macros, but it is better to define correct ones.
Move $(CLANG_FLAGS) to KBUILD_CPPFLAGS, so that all *.c, *.S, *.lds.S
will be processed with the proper target triple.
[Note]
After the patch submission, we got an actual problem that needs this
commit. (CBL issue 1859)
Link: https://github.com/ClangBuiltLinux/linux/issues/1859
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43fc0a9990 upstream.
After commit feb843a469 ("kbuild: add $(CLANG_FLAGS) to
KBUILD_CPPFLAGS"), there is an error while building certain PowerPC
assembly files with clang:
arch/powerpc/lib/copypage_power7.S: Assembler messages:
arch/powerpc/lib/copypage_power7.S:34: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:35: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:37: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:38: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:40: Error: junk at end of line: `0b01010'
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
as-option only uses KBUILD_AFLAGS, so after removing CLANG_FLAGS from
KBUILD_AFLAGS, there is no more '--target=' or '--prefix=' flags. As a
result of those missing flags, the host target
will be tested during as-option calls and likely fail, meaning necessary
flags may not get added when building assembly files, resulting in
errors like seen above.
Add KBUILD_CPPFLAGS to as-option invocations to clear up the errors.
This should have been done in commit d5c8d6e0fa ("kbuild: Update
assembler calls to use proper flags and language target"), which
switched from using the assembler target to the assembler-with-cpp
target, so flags that affect preprocessing are passed along in all
relevant tests. as-option now mirrors cc-option.
Fixes: feb843a469 ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYs=koW9WardsTtora+nMgLR3raHz-LSLr58tgX4T5Mxag@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff6e7f50b upstream.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following errors appear multiple times when
building ARCH=powerpc powernv_defconfig:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12d4): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717520 is not in [-2147483648, 2147483647]; references '__start___soft_mask_table'
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12e8): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717392 is not in [-2147483648, 2147483647]; references '__stop___soft_mask_table'
Diffing the .o.cmd files reveals that -DHAVE_AS_ATHIGH=1 is not present
anymore, because as-instr only uses KBUILD_AFLAGS, which will no longer
contain '--target'.
Mirror Kconfig's as-instr and add CLANG_FLAGS explicitly to the
invocation to ensure the target information is always present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7e5eb53bf upstream.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building the compat
PowerPC vDSO:
clang: error: unsupported option '-mbig-endian' for target 'x86_64-pc-linux-gnu'
make[3]: *** [.../arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/vdso32.so.dbg] Error 1
Explicitly add CLANG_FLAGS to ldflags-y, so that '--target' will always
be present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08f6554ff9 upstream.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building ARCH=mips
with clang (tip of tree error shown):
clang: error: unsupported option '-mabi=' for target 'x86_64-pc-linux-gnu'
Add KBUILD_CPPFLAGS in the CHECKFLAGS invocation to keep everything
working after the move.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11ca605653 upstream.
The previous bugfix caused a warning on 64-bit builds:
drivers/input/touchscreen/ads7846.c:1126:17: warning: cast to smaller integer type 'u32' (aka 'unsigned int') from 'const void *' [-Wvoid-pointer-to-int-cast]
Change the cast back to something that works on both 32-bit and 64-bit
kernels.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306100442.jStknDT1-lkp@intel.com/
Fixes: 8f7913c04f ("Input: ads7846 - Fix usage of match data")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d8fc0539 upstream.
The @source inode must be valid. It is even checked via IS_SWAPFILE()
above making it pretty clear. So no need to check it when we unlock.
What doesn't need to exist is the @target inode. The lock_two_inodes()
helper currently swaps the @inode1 and @inode2 arguments if @inode1 is
NULL to have consistent lock class usage. However, we know that at least
for vfs_rename() that @inode1 is @source and thus is never NULL as per
above. We also know that @source is a different inode than @target as
that is checked right at the beginning of vfs_rename(). So we know that
@source is valid and locked and that @target is locked. So drop the
check whether @source is non-NULL.
Fixes: 28eceeda13 ("fs: Lock moved directories")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307030026.9sE2pk2x-lkp@intel.com
Message-Id: <20230703-vfs-rename-source-v1-1-37eebb29b65b@kernel.org>
[brauner: use commit message from patch I sent concurrently]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5a99602b7 upstream.
Following build error triggered while build with clang version 17.0.0
with W=1(this can't be reporduced with gcc 13.1.0):
drivers/md/raid1-10.c:117:25: error: casting from randomized structure
pointer type 'struct block_device *' to 'struct md_rdev *'
117 | struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev;
| ^
Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/
Fixes: 8295efbe68 ("md/raid1-10: factor out a helper to submit normal write")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cee4bd16c3 upstream.
Dev can be renamed also while up for supported device. We currently
wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME
event.
Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and
correctly set the NETDEV_LED_MODE_LINKUP bit.
Fixes: 5f820ed523 ("leds: trigger: netdev: fix handling on interface rename")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8ef123393 upstream.
The DT version of this board has a custom file with the gpio
device. However, it does nothing because the d2net_init()
has no caller or prototype:
arch/arm/mach-orion5x/board-d2net.c:101:13: error: no previous prototype for 'd2net_init'
Call it from the board-dt file as intended.
Fixes: 94b0bd366e ("ARM: orion5x: convert d2net to Device Tree")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230516153109.514251-10-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edcbdd57de upstream.
After renaming NAND controller node name from "qpic-nand" to
"nand-controller", the board DTS/DTSI also have to be updated:
Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property
Cc: <stable@vger.kernel.org>
Fixes: 9e1e00f18a ("ARM: dts: qcom: Fix node name for NAND controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420072811.36947-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0f19091d4 upstream.
commit 04715461abf7 altered the node names in a DTSI file
used by qcom-apq8060-dragonboard.dts breaking the board.
Align the node names in the DTS file and the board boots
again.
Cc: stable@vger.kernel.org
Fixes: 85055a1eec ("ARM: dts: qcom-msm8660: align RPM regulators node name with bindings")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230414135747.34994-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f050e56de8 upstream.
The driver's probe() first registers regulators in a loop and then in a
second loop passes them as irq data to the interrupt handlers. However
the function to get the regulator for given name
tps65219_get_rdev_by_name() was a no-op due to argument passed by value,
not pointer, thus the second loop assigned always same value - from
previous loop. The interrupts, when fired, where executed with wrong
data. Compiler also noticed it:
drivers/regulator/tps65219-regulator.c: In function ‘tps65219_get_rdev_by_name’:
drivers/regulator/tps65219-regulator.c:292:60: error: parameter ‘dev’ set but not used [-Werror=unused-but-set-parameter]
Fixes: c12ac5fc3e ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Cc: <stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com
Link: https://lore.kernel.org/r/20230507144656.192800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a46d37012a upstream.
If the second component fails to initialize, cleanup the first on.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to component")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-1-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9c058d14f upstream.
After reordering the irq probe, the error path was not properly done.
Lets fix it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: 4cbb264d4e ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-2-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40b0a74938 upstream.
At __btrfs_cow_block(), instead of doing a BUG_ON() in case we fail to
record a tree mod log root insertion operation, do a transaction abort
instead. There's really no need for the BUG_ON(), we can properly
release all resources in this context and turn the filesystem to RO mode
and in an error state instead.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ede600e497 upstream.
At split_node(), if we fail to log the tree mod log copy operation, we
return without unlocking the split extent buffer we just allocated and
without decrementing the reference we own on it. Fix this by unlocking
it and decrementing the ref count before returning.
Fixes: 5de865eebb ("Btrfs: fix tree mod logging")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d09c51521f upstream.
When COWing an extent buffer that is not the root node, we need to log in
the tree mod log that we replaced a pointer in the parent node, otherwise
a tree mod log user doing a search on the b+tree can return incorrect
results (that miss something). We are doing the call to
btrfs_tree_mod_log_insert_key() but we totally ignore its return value.
So fix this by adding the missing error handling, resulting in a
transaction abort and freeing the COWed extent buffer.
Fixes: f230475e62 ("Btrfs: put all block modifications into the tree mod log")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e27180994 upstream.
The reclaim process can temporarily fail. For example, if the space is
getting tight, it fails to make the block group read-only. If there are no
further writes on that block group, the block group will never get back to
the reclaim list, and the BG never gets reclaimed. In a certain workload,
we can leave many such block groups never reclaimed.
So, let's get it back to the list and give it a chance to be reclaimed.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a1b0e729d upstream.
The block group tree was not present among the lockdep classes. We could
get potentially lockdep warnings but so far none has been seen, also
because block-group-tree is a relatively new feature.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93463ff7b5 upstream.
When a filesystem is read-only, we cannot reclaim a block group as it
cannot rewrite the data. Just bail out in that case.
Note that it can drop block groups in this case. As we did
sb_start_write(), read-only filesystem means we got a fatal error and
forced read-only. There is no chance to reclaim them again.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ed01616ba upstream.
The reclaiming process only starts after the filesystem volumes are
allocated to a certain level (75% by default). Thus, the list of
reclaiming target block groups can build up so huge at the time the
reclaim process kicks in. On a test run, there were over 1000 BGs in the
reclaim list.
As the reclaim involves rewriting the data, it takes really long time to
reclaim the BGs. While the reclaim is running, btrfs_delete_unused_bgs()
won't proceed because the reclaim side is holding
fs_info->reclaim_bgs_lock. As a result, we will have a large number of
unused BGs kept in the unused list. On my test run, I got 1057 unused BGs.
Since deleting a block group is relatively easy and fast work, we can call
btrfs_delete_unused_bgs() while it reclaims BGs, to avoid building up
unused BGs.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95c8e349d8 upstream.
The way that tree mod log tracks the ultimate length of the eb, the
variable 'n', eventually turns up the correct value, but at intermediate
steps during the rewind, n can be inaccurate as a representation of the
end of the eb. For example, it doesn't get updated on move rewinds, and
it does get updated for add/remove in the middle of the eb.
To detect cases with invalid moves, introduce a separate variable called
max_slot which tries to track the maximum valid slot in the rewind eb.
We can then warn if we do a move whose src range goes beyond the max
valid slot.
There is a commented caveat that it is possible to have this value be an
overestimate due to the challenge of properly handling 'add' operations
in the middle of the eb, but in practice it doesn't cause enough of a
problem to throw out the max idea in favor of tracking every valid slot.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cead5422a upstream.
There is a fairly unlikely race condition in tree mod log rewind that
can result in a kernel panic which has the following trace:
[530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002
[530.618] #PF: supervisor read access in kernel mode
[530.629] #PF: error_code(0x0000) - not-present page
[530.641] PGD 0 P4D 0
[530.647] Oops: 0000 [#1] SMP
[530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1
[530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017
[530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00
[530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246
[530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100
[530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8
[530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff
[530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000
[530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0
[530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000
[530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0
[530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[530.928] Call Trace:
[530.934] ? btrfs_printk+0x13b/0x18c
[530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130
[530.955] btrfs_map_bio+0x75/0x330
[530.963] ? kmem_cache_alloc+0x12a/0x2d0
[530.973] ? btrfs_submit_metadata_bio+0x63/0x100
[530.984] btrfs_submit_metadata_bio+0xa4/0x100
[530.995] submit_extent_page+0x30f/0x360
[531.004] read_extent_buffer_pages+0x49e/0x6d0
[531.015] ? submit_extent_page+0x360/0x360
[531.025] btree_read_extent_buffer_pages+0x5f/0x150
[531.037] read_tree_block+0x37/0x60
[531.046] read_block_for_search+0x18b/0x410
[531.056] btrfs_search_old_slot+0x198/0x2f0
[531.066] resolve_indirect_ref+0xfe/0x6f0
[531.076] ? ulist_alloc+0x31/0x60
[531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0
[531.095] find_parent_nodes+0x720/0x1830
[531.105] ? ulist_alloc+0x10/0x60
[531.113] iterate_extent_inodes+0xea/0x370
[531.123] ? btrfs_previous_extent_item+0x8f/0x110
[531.134] ? btrfs_search_path_in_tree+0x240/0x240
[531.146] iterate_inodes_from_logical+0x98/0xd0
[531.157] ? btrfs_search_path_in_tree+0x240/0x240
[531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180
[531.179] btrfs_ioctl+0xe2/0x2eb0
This occurs when logical inode resolution takes a tree mod log sequence
number, and then while backref walking hits a rewind on a busy node
which has the following sequence of tree mod log operations (numbers
filled in from a specific example, but they are somewhat arbitrary)
REMOVE_WHILE_FREEING slot 532
REMOVE_WHILE_FREEING slot 531
REMOVE_WHILE_FREEING slot 530
...
REMOVE_WHILE_FREEING slot 0
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
ADD slot 455
ADD slot 454
ADD slot 453
...
ADD slot 0
MOVE src slot 0 -> dst slot 456 nritems 533
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
When this sequence gets applied via btrfs_tree_mod_log_rewind, it
allocates a fresh rewind eb, and first inserts the correct key info for
the 533 elements, then overwrites the first 456 of them, then decrements
the count by 456 via the add ops, then rewinds the move by doing a
memmove from 456:988->0:532. We have never written anything past 532, so
that memmove writes garbage into the 0:532 range. In practice, this
results in a lot of fully 0 keys. The rewind then puts valid keys into
slots 0:455 with the last removes, but 456:532 are still invalid.
When search_old_slot uses this eb, if it uses one of those invalid
slots, it can then read the extent buffer and issue a bio for offset 0
which ultimately panics looking up extent mappings.
This bad tree mod log sequence gets generated when the node balancing
code happens to do a balance_node_right followed by a push_node_left
while logging in the tree mod log. Illustrated for ebs L and R (left and
right):
L R
start:
[XXX|YYY|...] [ZZZ|...|...]
balance_node_right:
[XXX|YYY|...] [...|ZZZ|...] move Z to make room for Y
[XXX|...|...] [YYY|ZZZ|...] copy Y from L to R
push_node_left:
[XXX|YYY|...] [...|ZZZ|...] copy Y from R to L
[XXX|YYY|...] [ZZZ|...|...] move Z into emptied space (NOT LOGGED!)
This is because balance_node_right logs a move, but push_node_left
explicitly doesn't. That is because logging the move would remove the
overwritten src < dst range in the right eb, which was already logged
when we called btrfs_tree_mod_log_eb_copy. The correct sequence would
include a move from 456:988 to 0:532 after remove 0:455 and before
removing 0:532. Reversing that sequence would entail creating keys for
0:532, then moving those keys out to 456:988, then creating more keys
for 0:455.
i.e.,
REMOVE_WHILE_FREEING slot 532
REMOVE_WHILE_FREEING slot 531
REMOVE_WHILE_FREEING slot 530
...
REMOVE_WHILE_FREEING slot 0
MOVE src slot 456 -> dst slot 0 nritems 533
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
ADD slot 455
ADD slot 454
ADD slot 453
...
ADD slot 0
MOVE src slot 0 -> dst slot 456 nritems 533
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
Fix this to log the move but avoid the double remove by putting all the
logging logic in btrfs_tree_mod_log_eb_copy which has enough information
to detect these cases and properly log moves, removes, and adds. Leave
btrfs_tree_mod_log_insert_move to handle insert_ptr and delete_ptr's
tree mod logging.
(Un)fortunately, this is quite difficult to reproduce, and I was only
able to reproduce it by adding sleeps in btrfs_search_old_slot that
would encourage more log rewinding during ino_to_logical ioctls. I was
able to hit the warning in the previous patch in the series without the
fix quite quickly, but not after this patch.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f18cc97845 upstream.
dirty_metadata_bytes is decremented in both places that clear the dirty
bit in a buffer, but only incremented in btrfs_mark_buffer_dirty, which
means that a buffer that is redirtied using btrfs_redirty_list_add won't
be added to dirty_metadata_bytes, but it will be subtracted when written
out, leading an inconsistency in the counter.
Move the dirty_metadata_bytes from btrfs_mark_buffer_dirty into
set_extent_buffer_dirty to also account for the redirty case, and remove
the now unused set_extent_buffer_dirty return value.
Fixes: d3575156f6 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
