With multi panel machines becoming more prominent it's also
important to know which connector's backlight we're talking
about. Include that information in all the backlight debug/error
messages.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215140021.2843-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=QFJG
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just a few NVMe fixes that should go into the 6.2 release, adding a
quirk and fixing two issues introduced in this release:
- NVMe fixes via Christoph:
- Always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
- Add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
- Set the DMA mask earlier (Christoph Hellwig)"
* tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux:
nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
nvme-pci: set the DMA mask earlier
nvme-pci: add bogus ID quirk for ADATA SX6000PNP
One more last minute patch for v6.2 updating the parsing of the
newly added spi-cs-setup-delay-ns - it's been pointed out that
due to the way DT parsing works the change in property size is
ABI visible so let's not let a release go out without it being
fixed. The change got split from some earlier ABI related fixes
to the property since the first version sent had a build error.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPuWgoACgkQJNaLcl1U
h9AI/gf/SEQzjI4vkoIezfwUfgzeP7Cjphna2rAmOOFc+S871FHUne7csWiNS3DI
YGhr3x2VqKdPyxkM+YoOavH9B9SmF9MUFtiT7Q5MEp0Pb7TQzw23qjrKBrKde0yX
r5cETkhy+21Tk6hzMs/0cC/4zRcf7IjgDT9L9+To9mKDHCYKoj3/WHoES6JgTYa8
z8fApLvjvCx2432eLzm66CoXgSK+UnQKT2bdo2w+YcITPBqge6REhmcfnOT9MzDO
LPOZ2hJ4lM6SPW2a4yBMX4pIouluDd6/giQ8LBt7xjesIKVmiHoW0dXRNis4+gq/
6kVjABEsBQ/xBOFgbuq1WfGRxaVJVA==
=qTWJ
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One more last minute patch for v6.2 updating the parsing of the newly
added spi-cs-setup-delay-ns.
It's been pointed out that due to the way DT parsing works the change
in property size is ABI visible so let's not let a release go out
without it being fixed. The change got split from some earlier ABI
related fixes to the property since the first version sent had a build
error"
* tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Use a 32-bit DT property for spi-cs-setup-delay-ns
Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- fix a potential Kconfig issue with gpio-mlxbf2 not selecting
GPIOLIB_IRQCHIP
- another immutable irqchip conversion, this time for gpio-vf610
- fix a wakeup issue on Clevo NH5xAx
-----BEGIN PGP SIGNATURE-----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=oon2
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential Kconfig issue with gpio-mlxbf2 not selecting
GPIOLIB_IRQCHIP
- another immutable irqchip conversion, this time for gpio-vf610
- fix a wakeup issue on Clevo NH5xAx
* tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf2: select GPIOLIB_IRQCHIP
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx
gpio: vf610: make irq_chip immutable
gpiolib: acpi: remove redundant declaration
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly what
this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Link: https://lore.kernel.org/all/20230216090610.130860-1-yang.lee@linux.alibaba.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The uuid code is very low maintainance now that the major overhaul
has completed, and doesn't need it's own tree. All the recent work
has been done by Andy who'd like to stay on as a reviewer without an
explicit tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code has been stale for years and I have no way to test it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though the hardware monitoring documentation already stated that new
drivers should use [devm_]devm_hwmon_device_register_with_info() to
register with the hardware monitoring subsystem, we still get submissions
for new drivers using the older APIs. There is no benefit to use those
APIs. On the contrary, using the older APIs results in substantially larger
code size. Explicitly deprecate [devm_]hwmon_device_register_with_groups()
to ensure that all new drivers use the latest API.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
-----BEGIN PGP SIGNATURE-----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=p6+A
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code will always use the current stacktrace as a key even
if a stacktrace contained in a specific event field was specified.
For example, we expect to use the 'unsigned long[] stack' field in the
below event in the histogram:
# echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > /sys/kernel/debug/tracing/dynamic_events
# echo 'hist:keys=delta.buckets=100,stack.stacktrace:sort=delta' > /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
But in fact, when we type out the trigger, we see that it's using the
plain old global 'stacktrace' as the key, which is just the stacktrace
when the event was hit and not the stacktrace contained in the event,
which is what we want:
# cat /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
hist:keys=delta.buckets=100,stacktrace:vals=hitcount:sort=delta.buckets=100:size=2048 [active]
And in fact, there's no code to actually retrieve it from the event,
so we need to add HIST_FIELD_FN_STACK and hist_field_stack() to get it
and hook it into the trigger code. For now, since the stack is just
using dynamic strings, this could just use the dynamic string
function, but it seems cleaner to have a dedicated function an be able
to tweak independently as necessary.
Link: https://lkml.kernel.org/r/11aa614c82976adbfa4ea763dbe885b5fb01d59c.1676063532.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Fixed 32bit build warning reported by kernel test robot <lkp@intel.com> ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
Fixes: aae7df5019 ("block: Integrity checksum flag")
Fixes: b1f0138857 ("block: Relocate bio integrity flags")
Reported-by: Saurav Kashyap <skashyap@marvell.com>
Tested-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230215171801.21062-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the current code, io statistics are missing for cgroup when bio
was throttled by blk-throttle. Fix it by moving the unreaching code
to submit_bio_noacct_nocheck.
Fixes: 3f98c75371 ("block: don't check bio in blk_throtl_dispatch_work_fn")
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230216032250.74230-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Link: https://lore.kernel.org/r/20230216-kobj_type-pci-v1-1-46a63c8612b5@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently, there are a few problems when printing hist triggers and
trace output when using stacktrace variables. This fixes the problems
seen below:
# echo 'hist:keys=delta.buckets=100,stack.stacktrace:sort=delta' > /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
# cat /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
hist:keys=delta.buckets=100,stacktrace:vals=hitcount:sort=delta.buckets=100:size=2048 [active]
# echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 2' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:ts=common_timestamp.usecs,st=stacktrace.stacktrace:sort=hitcount:size=2048:clock=global if prev_state == 2 [active]
and also in the trace output (should be stack.stacktrace):
{ delta: ~ 100-199, stacktrace __schedule+0xa19/0x1520
Link: https://lkml.kernel.org/r/60bebd4e546728e012a7a2bcbf58716d48ba6edb.1676063532.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When calling the KVM_GET_DEBUGREGS ioctl, on some configurations, there
might be some unitialized portions of the kvm_debugregs structure that
could be copied to userspace. Prevent this as is done in the other kvm
ioctls, by setting the whole structure to 0 before copying anything into
it.
Bonus is that this reduces the lines of code as the explicit flag
setting and reserved space zeroing out can be removed.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <x86@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@kernel.org>
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230214103304.3689213-1-gregkh@linuxfoundation.org>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make tdp_mmu_allowed static since it is only ever used within
arch/x86/kvm/mmu/mmu.c.
Link: https://lore.kernel.org/kvm/202302072055.odjDVd5V-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20230213212844.3062733-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
swiotlb_max_segment has always been a bogus API, so remove it now that
the remaining callers are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Otherwise the while() loop in dm_wq_requeue_work() can result in a
"dead loop" on systems that have preemption disabled. This is
particularly problematic on single cpu systems.
Fixes: 8b211aaccb ("dm: add two stage requeue mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.
Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.
For io_uring, this makes a substantial difference. Before:
submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31
and after:
submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31
or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.
radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.
Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The HDaudio stream allocation is done first, and in a second step the
LOSIDV parameter is programmed for the multi-link used by a codec.
This leads to a possible stream_tag leak, e.g. if a DisplayAudio link
is not used. This would happen when a non-Intel graphics card is used
and userspace unconditionally uses the Intel Display Audio PCMs without
checking if they are connected to a receiver with jack controls.
We should first check that there is a valid multi-link entry to
configure before allocating a stream_tag. This change aligns the
dma_assign and dma_cleanup phases.
Complements: b0cd60f3e9 ("ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpers")
Link: https://github.com/thesofproject/linux/issues/4151
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230216162340.19480-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An earlier patch which introduced smp_load_acquire/smp_store_release
into rxe_queue.h incorrectly assumed that surrounding spin-locks in
rxe_verbs.c around queue updates for kernel ulps was sufficient to
protect the passing of data through the queues between the ulp and
the rxe tasklets. But this was incorrect. The typical sequence was
ulp rxe requester tasklet
------------------------ ---------------------
spin_lock_irqsave() wqe = queue_head(queue)
if (!queue_full(q)) { if (!wqe)
spin_unlock_irqrestore return;
return -ENOMEM
} <process wqe>
wqe = queue_producer_addr(q)
<fill in wqe> queue_advance_consumer(queue)
queue_advance_producer(q)
spin_unlock_irqrestore()
queue_head() calls queue_empty() which calls smp_load_acquire()
For user space apps queue_advance_producer() calls smp_store_release()
so that there is a memory barrier between the producer and the
consumer but for kernel ulps queue_advance_produce() just incremented
the producer index because the lock function is a release function.
But to work the barrier has to come between filling in the wqe and
updating the producer index. This patch adds the missing barriers.
It also changes the enum names for the ulp queue types to
QUEUE_TYPE_FROM/TO_ULP instead of QUEUE_TYPE_TO/FROM_DRIVER
which is very ambiguous. This bug is suspected as the cause of very
rare lockups in a very high scale storage application. It is a bug
in any case and should be corrected.
Fixes: 0a67c46d2e ("RDMA/rxe: Protect user space index loads/stores")
Link: https://lore.kernel.org/r/20230214071053.5395-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When registering memory in a large chunk that doesn't fit into a single PF
message, the PF may return GDMA_STATUS_MORE_ENTRIES on the first message if
there are more messages needed for registering more chunks.
Fix the VF to make it process the correct return code.
Fixes: 0266a17763 ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/1676507522-21018-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The spidev interface has been de-facto stable for many years. This notice
has been unchanged since 2007 and is incorrect so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230216123014.110541-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regmap provided by simple_mfd_i2c driver and remove unused variable.
Identify device variant by checking compatible property in DT.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently all the object types in the rxe driver are allocated in
rdma-core except for MRs. By moving tha kzalloc() call outside of
the pool code the rxe_alloc() subroutine can be eliminated and code
checking for MR as a special case can be removed.
This patch moves the kzalloc() and kfree_rcu() calls into the mr
registration and destruction verbs. It removes that code from
rxe_pool.c including the rxe_alloc() subroutine which is no longer
used.
Link: https://lore.kernel.org/r/20230213225551.12437-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Clang can do some aggressive inlining, which provides it with greater
visibility into the sizes of various objects that are passed into
helpers. Specifically, compare_netdev_and_ip() can see through the type
given to the "sa" argument, which means it can generate code for "struct
sockaddr_in" that would have been passed to ipv6_addr_cmp() (that expects
to operate on the larger "struct sockaddr_in6"), which would result in a
compile-time buffer overflow condition detected by memcmp(). Logically,
this state isn't reachable due to the sa_family assignment two callers
above and the check in compare_netdev_and_ip(). Instead, provide a
compile-time check on sizes so the size-mismatched code will be elided
when inlining. Avoids the following warning from Clang:
../include/linux/fortify-string.h:652:4: error: call to '__read_overflow' declared with 'error' attribute: detected read beyond size of object (1st parameter)
__read_overflow();
^
note: In function 'cma_netevent_callback'
note: which inlined function 'node_from_ndev_ip'
1 error generated.
When the underlying object size is not known (e.g. with GCC and older
Clang), the result of __builtin_object_size() is SIZE_MAX, which will also
compile away, leaving the code as it was originally.
Link: https://lore.kernel.org/r/20230208232549.never.139-kees@kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1687
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The enclustra PE1 is a baseboard from enclustra GmbH for the enclustra
Mercury AA1+ SOM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Currently the rxe driver does not handle all cases of zero length rdma
operations correctly. The client does not have to provide an rkey for zero
length RDMA read or write operations so the rkey provided may be invalid
and should not be used to lookup an mr.
This patch corrects the driver to ignore the provided rkey if the reth
length is zero for read or write operations and make sure to set the mr to
NULL. In read_reply() if length is zero rxe_recheck_mr() is not
called. Warnings are added in the routines in rxe_mr.c to catch NULL MRs
when the length is non-zero.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230202044240.6304-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.
Discovered while auditing locking to write the Rust abstractions.
Fixes: 2194a63a81 ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f13 ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Sekhar is stepping down from supporting DaVinci. As it's quite low-volume,
I will keep maintaining it.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
