The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes: ddaf144c61 ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
The register state struct is 848 bytes, which ends up bloating the
apple_rtkit_crashlog_dump_regs stack frame beyond 1024 on some
32-bit platforms, triggering compile warnings.
This doesn't matter for 64BIT/ARM64, but there's also no good reason to
copy the structure to the stack in this case. We can use __packed to
avoid alignment issues, there are no double-read hazards, and this is a
fatal error path so performance does not matter.
Fixes: 22991d8d57 ("soc: apple: rtkit: Add register dump decoding to crashlog")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Provide a slimline configuration intended to be booted on virtual
machines, with the goal of providing a light configuration which will
boot on and enable features available in mach-virt. This is defined in
terms of the standard defconfig, with an additional virt.config fragment
which disables options unneeded in a virtual configuration.
As a first step we just disable all the ARCH_ configuration options,
disabling the build of all the SoC specific drivers. This results in a
kernel that builds about 25% faster in my testing, if this approach
works for people we can add further options.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-3-cd0694a05f13@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While warning on overridden Kconfig options is a good default for merging
config fragements sometimes that is our explicit intent and the warnings
are unhelpful, add a new merge_into_defconfig_override which does the merge
but with warnings suppressed.
Since merge_into_defconfig accepts any number of fragments it is difficult
to allow it to accept the flag.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-2-cd0694a05f13@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently merge_config.sh will unconditionally warn if a fragment overrides
any already set symbol. This is generally desirable but is inconvenient in
cases where we want to create a fragment which disables unwanted options in
the base configuration, for example when attempting to produce a smaller
version of another configuration.
Add an option -Q which will suppress these warnings.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-1-cd0694a05f13@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There was a problem reported to us where the addition of a VF with an IPv6
address ending with a particular sequence would cause the parent device on
the PF to no longer be able to respond to neighbor discovery packets.
In this case, we had an ovs-bridge device living on top of a VLAN, which
was on top of a PF, and it would not be able to talk anymore (the neighbor
entry would expire and couldn't be restored).
The root cause of the issue is that if the PF is asked to be in IFF_PROMISC
mode (promiscuous mode) and it had an ipv6 address that needed the
33:33:ff:00:00:04 multicast address to work, then when the VF was added
with the need for the same multicast address, the VF would steal all the
traffic destined for that address.
The ice driver didn't auto-subscribe a request of IFF_PROMISC to the
"multicast replication from other port's traffic" meaning that it won't get
for instance, packets with an exact destination in the VF, as above.
The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04,
results in no packets for that multicast address making it to the PF (which
is in promisc but NOT "multicast replication").
The fix is to enable "multicast promiscuous" whenever the driver is asked
to enable IFF_PROMISC, and make sure to disable it when appropriate.
Fixes: e94d447866 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Apply commit 7592b79ba4 ("ACPI: resource: do IRQ override on XMG Core 15")
override for all vendors using this mainboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This pull request contains the following:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
-----BEGIN PGP SIGNATURE-----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=OWY2
-----END PGP SIGNATURE-----
Merge tag 'clocksource.2023.02.06b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
Fix a regression introduced by commit 9946e39fe8 ("ACPI: resource: skip
IRQ override on AMD Zen platforms") on MAINGEAR Vector Pro 2 systems, which
causes the built-in keyboard to not work. This restores the functionality
by adding an IRQ override.
No other IRQs were being overridden before, so this should be all that is
needed for these systems. I have personally tested this on the 15" model
(MG-VCP2-15A3070T), and I have confirmation that the issue is present on
the 17" model (MG-VCP2-17A3070T).
Fixes: 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Adam Niederer <adam.niederer@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Initialize hrtimer based broadcast clock event device on RISC-V
before C3STOP can be used (Conor Dooley)
- Add DT binding for RISC-V timer and add the C3STOP flag if the DT
tells the timer can not wake up the CPU (Anup Patel)
- Increase the RISC-V timer rating as it is more efficient than mmio
timers (Samuel Holland)
- Drop obsolete dependency on COMPILE_TEST on microchip-pit64b as the
OF is already depending on it (Jean Delvare)
- Mark sh_cmt, sh_tmu, em_sti drivers as non-removable (Uwe
Kleine-König)
- Add binding description for mediatek,mt8365-systimer (Bernhard
Rosenkränzer)
- Add compatibles for T-Head's C9xx (Icenowy Zheng)
- Restrict the microchip-pit64b compilation to the ARM architecture
and add the delay timer (Claudiu Beznea)
- Set the static key to select the SBI or Sstc timer sooner to prevent
the first call to use the SBI while Sstc must be used (Matt Evans)
- Add the CLOCK_EVT_FEAT_DYNIRQ flag to optimize the timer wake up on
the sun4i platform (Yangtao Li)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmPqLssACgkQqDIjiipP
6E/LvwgApZOFjzIQs0a/5Ank/amG3qJ9Gm6Fau9ntJZCnUYe/uA2NTm3IGWFBJl9
saSAXugzL894P2jF3n9r7kY4WhlOvlVpEIIfjxGwRkCo0R0OtIWFuz26b1iBpCQ7
OwQR2lxB7Fc4c8mnMMRpgpWeraQGLLPEqAoRpeF4h2UjObzqqNjxDr3MeDVaDiea
QfhGRw3b7pKu9NTyXT6TnMMx8UC8nFCdmdQc3g7KuvkI32ZbC15voFI+XicjY56n
homYY+UAK3zyVM53RXamrKbjWA06OzlN7+4ab1DHsmEWBcJ0Q+2sogHnLPpwwaEL
Dfhu/JU0rtORDGI+lgUF677iw6+oAA==
=xNOw
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.3-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event changes from Daniel Lezcano:
- Add rktimer for rv1126 Rockchip based board (Jagan Teki)
- Initialize hrtimer based broadcast clock event device on RISC-V
before C3STOP can be used (Conor Dooley)
- Add DT binding for RISC-V timer and add the C3STOP flag if the DT
tells the timer can not wake up the CPU (Anup Patel)
- Increase the RISC-V timer rating as it is more efficient than mmio
timers (Samuel Holland)
- Drop obsolete dependency on COMPILE_TEST on microchip-pit64b as the
OF is already depending on it (Jean Delvare)
- Mark sh_cmt, sh_tmu, em_sti drivers as non-removable (Uwe
Kleine-König)
- Add binding description for mediatek,mt8365-systimer (Bernhard
Rosenkränzer)
- Add compatibles for T-Head's C9xx (Icenowy Zheng)
- Restrict the microchip-pit64b compilation to the ARM architecture
and add the delay timer (Claudiu Beznea)
- Set the static key to select the SBI or Sstc timer sooner to prevent
the first call to use the SBI while Sstc must be used (Matt Evans)
- Add the CLOCK_EVT_FEAT_DYNIRQ flag to optimize the timer wake up on
the sun4i platform (Yangtao Li)
Link: https://lore.kernel/org/r/b7d1d982-d717-2930-b353-19b92cbe390f@linaro.org
Add a pair of macros for exporting functions only if CONFIG_PM
is enabled.
The naming follows the style of the standard EXPORT_SYMBOL_*()
macros that they replace.
Sometimes a module wants to export PM functions directly to other
drivers, not a complete struct dev_pm_ops. A typical example is
where a core library exports the generic (shared) implementation
and calling code wraps one or more of these in custom code.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alexander Lobakin says:
====================
The set grew from the poor performance of %BPF_F_TEST_XDP_LIVE_FRAMES
when the ice-backed device is a sender. Initially there were around
3.3 Mpps / thread, while I have 5.5 on skb-based pktgen ...
After fixing 0005 (0004 is a prereq for it) first (strange thing nobody
noticed that earlier), I started catching random OOMs. This is how 0002
(and partially 0001) appeared.
0003 is a suggestion from Maciej to not waste time on refactoring dead
lines. 0006 is a "cherry on top" to get away with the final 6.7 Mpps.
4.5 of 6 are fixes, but only the first three are tagged, since it then
starts being tricky. I may backport them manually later on.
TL;DR for the series is that shortcuts are good, but only as long as
they don't make the driver miss important things. %XDP_TX is purely
driver-local, however .ndo_xdp_xmit() is not, and sometimes assumptions
can be unsafe there.
With that series and also one core code patch[0], "live frames" and
xdp-trafficgen are now safe'n'fast on ice (probably more to come).
[0] https://lore.kernel.org/all/20230209172827.874728-1-alexandr.lobakin@intel.com
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner.
It makes no sense to keep it global in a different file than its caller.
Move it just next to the sole call site and mark static. Also, it
doesn't need a full xdp_convert_frame_to_buff(). Save several cycles
and fill only the fields used by __ice_xmit_xdp_ring() later on.
Finally, since it doesn't modify @xdpf anyhow, mark the argument const
to save some more (whole -11 bytes of .text! :D).
Thanks to 1 jump less and less calcs as well, this yields as many as
6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional
again (see xdp_convert_buff_to_frame()) and just works when there are
no source device's driver issues.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com
As already mentioned, freeing any &xdp_frame via page_frag_free() is
wrong, as it assumes the frame is backed by either an order-0 page or
a page with no "patrons" behind them, while in fact frames backed by
Page Pool can be redirected to a device, which's driver doesn't use it.
Keep storing a pointer to the raw buffer and then freeing it
unconditionally via page_frag_free() for %XDP_TX frames, but introduce
a separate type in the enum for frames coming through .ndo_xdp_xmit(),
and free them via xdp_return_frame_bulk(). Note that saving xdpf as
xdp_buff->data_hard_start is intentional and is always true when
everything is configured properly.
After this change, %XDP_REDIRECT from a Page Pool based driver to ice
becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue
turn into 6.6, hehe.
Let it go with no "Fixes:" tag as it spans across good 5+ commits and
can't be trivially backported.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com
When queueing frames from a Page Pool for redirecting to a device backed
by the ice driver, `perf top` shows heavy load on page_alloc() and
page_frag_free(), despite that on a properly working system it must be
fully or at least almost zero-alloc. The problem is in fact a bit deeper
and raises from how ice cleans up completed Tx buffers.
The story so far: when cleaning/freeing the resources related to
a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some
heuristics only without setting any type explicitly (except for dummy
Flow Director packets, which are marked via ice_tx_buf::tx_flags).
This kinda works, but only up to some point. For example, currently ice
assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by
either plain order-0 page or plain page frag, while it may also be
backed by Page Pool or any other possible memory models introduced in
future. This means any &xdp_frame must be freed properly via
xdp_return_frame() family with no assumptions.
In order to do that, the whole heuristics must be replaced with setting
the Tx buffer/frame type explicitly, just how it's always been done via
an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't
hurt much -- especially given that sometimes there was a check for
%ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum
member. The rest of the changes is straightforward and most of it is
just a conversion to rely now on the type set in &ice_tx_buf rather than
to some secondary properties.
For now, no functional changes intended, the change only prepares the
ground for starting freeing XDP frames properly next step. And it must
be done atomically/synchronously to not break stuff.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com
The tagged commit started sending %XDP_TX frames from XSk Rx ring
directly without converting it to an &xdp_frame. However, when XSk is
enabled on a queue pair, it has its separate Tx cleaning functions, so
neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens
there.
Remove impossible branches in order to reduce the diffstat of the
upcoming change.
Fixes: a24b4c6e9a ("ice: xsk: Do not convert to buff to frame for XDP_TX")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com
Sometimes, under heavy XDP Tx traffic, e.g. when using XDP traffic
generator (%BPF_F_TEST_XDP_LIVE_FRAMES), the machine can catch OOM due
to the driver not freeing all of the pages passed to it by
.ndo_xdp_xmit().
Turned out that during the development of the tagged commit, the check,
which ensures that we have a free descriptor to queue a frame, moved
into the branch happening only when a buffer has frags. Otherwise, we
only run a cleaning cycle, but don't check anything.
ATST, there can be situations when the driver gets new frames to send,
but there are no buffers that can be cleaned/completed and the ring has
no free slots. It's very rare, but still possible (> 6.5 Mpps per ring).
The driver then fills the next buffer/descriptor, effectively
overwriting the data, which still needs to be freed.
Restore the check after the cleaning routine to make sure there is a
slot to queue a new frame. When there are frags, there still will be a
separate check that we can place all of them, but if the ring is full,
there's no point in wasting any more time.
(minor: make `!ready_frames` unlikely since it happens ~1-2 times per
billion of frames)
Fixes: 3246a10752 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-3-alexandr.lobakin@intel.com
xdp_tx_active is used to indicate whether an XDP ring has any %XDP_TX
frames queued to shortcut processing Tx cleaning for XSk-enabled queues.
When !XSk, it simply indicates whether the ring has any queued frames in
general.
It gets increased on each frame placed onto the ring and counts the
whole frame, not each frag. However, currently it gets decremented in
ice_clean_xdp_tx_buf(), which is called per each buffer, i.e. per each
frag. Thus, on completing multi-frag frames, an underflow happens.
Move the decrement to the outer function and do it once per frame, not
buf. Also, do that on the stack and update the ring counter after the
loop is done to save several cycles.
XSk rings are fine since there are no frags at the moment.
Fixes: 3246a10752 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-2-alexandr.lobakin@intel.com
ath.git patches for v6.3. Major changes:
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently checks for weight and priority ranges don't check incoming value
from the devlink. Instead it checks node current weight or priority. This
makes those checks useless.
Change range checks in ice_set_object_tx_priority() and
ice_set_object_tx_weight() to check against incoming priority an weight.
Fixes: 42c2eb6b1f ("ice: Implement devlink-rate API")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
building with W=2 has these errors
redundant redeclaration of ‘zd_rf_generic_patch_6m’ [-Werror=redundant-decls]
redundant redeclaration of ‘zd_rf_patch_6m_band_edge’ [-Werror=redundant-decls]
Remove the second decls.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230204200902.1709343-1-trix@redhat.com
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the
TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit
the value. Compile test only.
sparse warnings: (new ones prefixed by >>)
>> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |=
>> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16
>> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119113146.9640-1-pkshih@realtek.com
By default the LED will blink when there is some activity.
This is only compile tested.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/73323811-aa58-a1be-7867-a5d45b7ae3d6@gmail.com
By default the LED will blink when there is some activity.
This was tested with a cheap "HT-WR813" from Aliexpress.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/8f7fd5d7-5baa-b38b-ad2a-977dcd9edd81@gmail.com
By default the LED will blink when there is some activity.
This was tested with a TP-Link TL-WN725N.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/34d62bf5-3595-0c77-2ca7-be78555f765d@gmail.com
If the chip can have an LED, register a struct led_classdev and enable
hardware-controlled blinking. When the chip is not transmitting or
receiving anything the LED is off. Otherwise the LED will blink
faster or slower according to the throughput.
The LED can be controlled from userspace by writing 0, 1, or 2 to
/sys/class/leds/rtl8xxxu-usbX-Y/brightness:
0 - solid off.
1 - solid on.
2 - hardware-controlled blinking.
In this patch none of the chips advertise having an LED. That will be
added in the next patches.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b8235bca-60c3-d0fe-a958-53c6dd3ba3f6@gmail.com
Macros prefixed with CONFIG_ are intended to be defined only by
Kconfig scripts. Here we remove the prefix from the
CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code.
This causes no change to functionality.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230118185353.2422-1-peter@n8pjl.ca
Previously, all supported chips had two RF paths. Therefore, these
codes used static number for TX power setting. Now, we are planning
to support a new chip which has only one RF path. So, we refine the
setting codes to refer to chip's RF path number at runtime.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230203065157.8227-1-pkshih@realtek.com
For a packet with 1SS rate, it can also transmit via 2 antenna, called
2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately,
the mask of 2T and 1T are the same, so it can still work well without
this fix.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230203064907.8046-1-pkshih@realtek.com
In path of setting channel and setting TX power, the rtw89_chan instance
to be used is controlled by top and passed down. The set_tx_shape_dfir()
is in path of setting TX power, so it should use the passed rtw89_chan
instead of querying it itself. Otherwise, it might encounter mismatch
between parameters if multi-channel.
For example,
rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201032057.7349-1-pkshih@realtek.com
Enable CLKREQ to reduce power consumption for 8852BE.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230126112715.5811-1-pkshih@realtek.com
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware
scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type
can still work well.
The use of this new type is the same as before, so we add new type to
avoid taking wrong firmware. Then, driver log can also give clear
information about this change:
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-7-pkshih@realtek.com
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after
0.29.26.0, and then we have more space to support other features, such as
P2P-PS, hardware scan and so on.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-6-pkshih@realtek.com
For different firmware type, it could use different IDMEM mode, so reset
it to default to avoid encountering error during we bisect firmware
version, like
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
rtw89_8852be 0000:03:00.0: fw security fail
rtw89_8852be 0000:03:00.0: download firmware fail
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
Driver can prepare pkt_list for firmware that only uses them to send out
the packets in specific situations. To understand the usage of current
status, and to check if there is leakage problem, dump bitmap and the
indices used by certain function.
An example looks like:
map:
...
pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
[SCAN 0]: 3
[SCAN 1]: 4
[SCAN 3]: 5
VIF [0] xx:xx:xx:xx:xx:xx
...
pkt_ofld[GENERAL]: 0 1 2
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-4-pkshih@realtek.com
For upcoming firmware, driver needs to do packet offload to firmware to
ensure LPS protocol work properly, so we update current connection and
disconnect flow to maintain packet offload flow, and integrate with
current WoWLAN flow which also needs packet offload.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
When driver fails to send H2C to firmware for pkt-offload, we should not
update the pkt_list of driver, and need to release allocated pkt index to
avoid wrong mapping between driver and firmware.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-2-pkshih@realtek.com
Buffer STA on TDLS links are not currently supported. Therefore, it
is not allowed to enter the PS mode after TDLS link is established.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119064631.66971-1-pkshih@realtek.com
Building BPF selftests out of srctree fails with:
make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'. Stop.
The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).
Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.
The issue exists for a while, but it became a problem only after commit
d68ae4982c ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.
Fixes: 03dcb78460 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
To debug channel concurrency more centrally, we add a new debug flag,
RTW89_DBG_CHAN, for channel related things, especially channel concurrency.
Then, we change MCC (multi-channel concurrency) C2H (chip to host packets)
debug flag to it.
Besides, refine debug logs to show TSF in u64 directly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119064342.65391-2-pkshih@realtek.com
A 8-byte offset is missed during parsing C2Hs (chip to host packets)
of MCC (multi-channel concurrent) series.
So, we fix it.
Fixes: ef9dff4cb4 ("wifi: rtw89: mac: process MCC related C2H")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119064342.65391-1-pkshih@realtek.com
Fix the following build warn removing unnecessary clean target
from the Makefile. lib.mk handles clean.
Makefile:10: warning: overriding recipe for target clean
../lib.mk:124: warning: ignoring old recipe for target clean
In addition, fix to use TEST_GEN_PROGS for generated test executables
and TES_PROGS for the shell script. Ger rid of all target as lib.mk
handles it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
RXI300 is a HW design to maintain stuffs across BUS, e.g. AXI, AHB, APB.
It will feedback an error when host does an invalid BUS operation.
For example,
* BUS master request without power/clock on.
* host reads/writes/accesses an invalid address.
They might lead to problems such as BUS timeout, platform hang, etc. So,
once if RXI300 feedback an error, it notifies that driver need a L2 SER
(system error recovery) to reset things.
Previously, driver did not parse the error scenario for RXI300. We add
it and assign a corresponding error code which will make SER flow do L2
reset.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119063529.61563-3-pkshih@realtek.com
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips,
this section is an address hole. It will lead to crash if trying to access
this section on chips except for 8852C. So, we avoid that.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119063529.61563-2-pkshih@realtek.com
Add mac function rtw89_mac_port_get_tsf() to get TSF by port.
It will be used when MCC (multi-channel concurrency) calculates
timing things.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119062453.58341-4-pkshih@realtek.com
Originally, rtw89_mac_port_tsf_sync() contains randomization logic
internally. However, not all situation, we need the randomization.
So, split out the generic part from it. And, make the full logic of
original one contained in rtw89_mac_port_tsf_sync_rand(). It will
still be used by its original caller as before. Then, the generic
one will be used in MCC (multi-channel concurrency) management flow.
MCC will implement its logic to decide the offset for TSF sync.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119062453.58341-3-pkshih@realtek.com
Strictly speaking, the unit of the offset should be TU instead of ms.
So, correct it and the macro for calculation. Then, to make the macro
generic, the factor n is moved outside.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119062453.58341-2-pkshih@realtek.com
Should update the driver with the supported firmware version of the
below item.
Bluetooth firmware BT_Coex_Ver: 0x07
Wi-Fi firmware version: RTL8852C->v0.27.56.10, RTL8852A->v0.24.36
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230117114109.4298-9-pkshih@realtek.com
