Modern intel hardware uses controllers that work in hardware
sequencing mode. In this mode, the controller exposes a subset
of operations, like read, write and erase, making it easier
and less error-prone for use.
On the other hand, most of the controllers handled by the
platform driver use software sequencing that exposes the
entire set of operations i.e. exposes the low level SPI-NOR
opcodes to the software for use.
Update PCI and Platform help text with this information.
Signed-off-by: Mauro Lima <mauro.lima@eclypsium.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230210164158.211065-1-mauro.lima@eclypsium.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the changes this time are minor devicetree corrections, the majority
being for 64-bit Rockchip SoC support. These are a couple of corrections
for properties that are in violation of the binding, some that put the
machine into safer operating points for the eMMC and thermal settings,
and missing properties that prevented rk356x PCIe and ethernet from
working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support
on various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner
to allow this to be used correctly after a futre driver change,
though it has no effect on older kernels.
-----BEGIN PGP SIGNATURE-----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=23z6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
* A fix to avoid partial TLB fences for huge pages, which are disallowed
by the ISA.
* A fix to to avoid missing a frame when dumping stacks.
* A fix to avoid misaligned accesses (and possibly overflows) in
kprobes.
* A fix for a race condition in tracking page dirtiness.
-----BEGIN PGP SIGNATURE-----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=hyiU
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This is a little bigger that I'd hope for this late in the cycle, but
they're all pretty concrete fixes and the only one that's bigger than
a few lines is pmdp_collapse_flush() (which is almost all
boilerplate/comment). It's also all bug fixes for issues that have
been around for a while.
So I think it's not all that scary, just bad timing.
- avoid partial TLB fences for huge pages, which are disallowed by
the ISA
- avoid missing a frame when dumping stacks
- avoid misaligned accesses (and possibly overflows) in kprobes
- fix a race condition in tracking page dirtiness"
* tag 'riscv-for-linus-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte
riscv: kprobe: Fixup misaligned load text
riscv: stacktrace: Fix missing the first frame
riscv: mm: Implement pmdp_collapse_flush for THP
We can error out of an allocation transaction when updating BMBT
blocks when things go wrong. This can be a btree corruption, and
unexpected ENOSPC, etc. In these cases, we already have deferred ops
queued for the first allocation that has been done, and we just want
to cancel out the transaction and shut down the filesystem on error.
In fact, we do just that for production systems - the assert that we
can't have a transaction with defer ops attached unless we are
already shut down is bogus and gets in the way of debugging
whatever issue is actually causing the transaction to be cancelled.
Remove the assert because it is causing spurious test failures to
hang test machines.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The tp->t_firstblock field is now raelly tracking the highest AG we
have locked, not the block number of the highest allocation we've
made. It's purpose is to prevent AGF locking deadlocks, so rename it
to "highest AG" and simplify the implementation to just track the
agno rather than a fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that xfs_alloc_vextent() does all the AGF deadlock prevention
filtering for multiple allocations in a single transaction, we no
longer need the allocation setup code to care about what AGs we
might already have locked.
Hence we can remove all the "nullfb" conditional logic in places
like xfs_bmap_btalloc() and instead have them focus simply on
setting up locality constraints. If the allocation fails due to
AGF lock filtering in xfs_alloc_vextent, then we just fall back as
we normally do to more relaxed allocation constraints.
As a result, any allocation that allows AG scanning (i.e. not
confined to a single AG) and does not force a worst case full
filesystem scan will now be able to attempt allocation from AGs
lower than that defined by tp->t_firstblock. This is because
xfs_alloc_vextent() allows try-locking of the AGFs and hence enables
low space algorithms to at least -try- to get space from AGs lower
than the one that we have currently locked and allocated from. This
is a significant improvement in the low space allocation algorithm.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When we enter xfs_bmbt_alloc_block() without having first allocated
a data extent (i.e. tp->t_firstblock == NULLFSBLOCK) because we
are doing something like unwritten extent conversion, the transaction
block reservation is used as the minleft value.
This works for operations like unwritten extent conversion, but it
assumes that the block reservation is only for a BMBT split. THis is
not always true, and sometimes results in larger than necessary
minleft values being set. We only actually need enough space for a
btree split, something we already handle correctly in
xfs_bmapi_write() via the xfs_bmapi_minleft() calculation.
We should use xfs_bmapi_minleft() in xfs_bmbt_alloc_block() to
calculate the number of blocks a BMBT split on this inode is going to
require, not use the transaction block reservation that contains the
maximum number of blocks this transaction may consume in it...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When an XFS filesystem has free inodes in chunks already allocated
on disk, it will still allocate new inode chunks if the target AG
has no free inodes in it. Normally, this is a good idea as it
preserves locality of all the inodes in a given directory.
However, at ENOSPC this can lead to using the last few remaining
free filesystem blocks to allocate a new chunk when there are many,
many free inodes that could be allocated without consuming free
space. This results in speeding up the consumption of the last few
blocks and inode create operations then returning ENOSPC when there
free inodes available because we don't have enough block left in the
filesystem for directory creation reservations to proceed.
Hence when we are near ENOSPC, we should be attempting to preserve
the remaining blocks for directory block allocation rather than
using them for unnecessary inode chunk creation.
This particular behaviour is exposed by xfs/294, when it drives to
ENOSPC on empty file creation whilst there are still thousands of
free inodes available for allocation in other AGs in the filesystem.
Hence, when we are within 1% of ENOSPC, change the inode allocation
behaviour to prefer to use existing free inodes over allocating new
inode chunks, even though it results is poorer locality of the data
set. It is more important for the allocations to be space efficient
near ENOSPC than to have optimal locality for performance, so lets
modify the inode AG selection code to reflect that fact.
This allows generic/294 to not only pass with this allocator rework
patchset, but to increase the number of post-ENOSPC empty inode
allocations to from ~600 to ~9080 before we hit ENOSPC on the
directory create transaction reservation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
I've recently encountered an ABBA deadlock with g/476. The upcoming
changes seem to make this much easier to hit, but the underlying
problem is a pre-existing one.
Essentially, if we select an AG for allocation, then lock the AGF
and then fail to allocate for some reason (e.g. minimum length
requirements cannot be satisfied), then we drop out of the
allocation with the AGF still locked.
The caller then modifies the allocation constraints - usually
loosening them up - and tries again. This can result in trying to
access AGFs that are lower than the AGF we already have locked from
the failed attempt. e.g. the failed attempt skipped several AGs
before failing, so we have locks an AG higher than the start AG.
Retrying the allocation from the start AG then causes us to violate
AGF lock ordering and this can lead to deadlocks.
The deadlock exists even if allocation succeeds - we can do a
followup allocations in the same transaction for BMBT blocks that
aren't guaranteed to be in the same AG as the original, and can move
into higher AGs. Hence we really need to move the tp->t_firstblock
tracking down into xfs_alloc_vextent() where it can be set when we
exit with a locked AG.
xfs_alloc_vextent() can also check there if the requested
allocation falls within the allow range of AGs set by
tp->t_firstblock. If we can't allocate within the range set, we have
to fail the allocation. If we are allowed to to non-blocking AGF
locking, we can ignore the AG locking order limitations as we can
use try-locks for the first iteration over requested AG range.
This invalidates a set of post allocation asserts that check that
the allocation is always above tp->t_firstblock if it is set.
Because we can use try-locks to avoid the deadlock in some
circumstances, having a pre-existing locked AGF doesn't always
prevent allocation from lower order AGFs. Hence those ASSERTs need
to be removed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The name passed into __xfs_xattr_put_listent is exactly namelen bytes
long and not null-terminated. Passing namelen+1 to the strscpy function
strscpy(offset, (char *)name, namelen + 1);
is therefore wrong. Go back to the old code, which works fine because
strncpy won't find a null in @name and stops after namelen bytes. It
really could be a memcpy call, but it worked for years.
Reported-by: syzbot+898115bc6d7140437215@syzkaller.appspotmail.com
Fixes: 8954c44ff4 ("xfs: use strscpy() to instead of strncpy()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
from Xiubo, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmPmbYkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+XXB/0c7jZNIR7+sQX6Tf+iaDPuCn2p03eP
vfogzoSCg+7yLq526PTfLYkG/MlLVdcQtm+w86VdUPv0b6G2FPWp1XA3xVkVcWOF
4kD640luNCWrHxB6Rw/NIwCogJGp0YKd3BDvkMgNdAd03gBNgHvzKIWtRJYZ/cUw
WY1LTCXZg3mJ7RL+3F9Mjvzesms/W/v3mW21ieTtAV1OJt1yEhPmosSZelU0tSt6
FLRMlkYtLcAkt2w86//J+b4sShcbcp/W4Io5QRrngGiT8v2Cd+PyoqqnC0V6cbVm
kUo9H0k31zv7p5r4zqjz0YWn130aSQG2MycFk2YywPptHZBrW6pr5AMm
=IUMM
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.2-rc8' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a pretty embarrassing omission in the session flush handler
from Xiubo, marked for stable"
* tag 'ceph-for-6.2-rc8' of https://github.com/ceph/ceph-client:
ceph: flush cap releases when the session is flushed
The new SM8550 SoC bumps up the HW version of QMP phy to v6.
Add the new DP specific offsets in the generic qmp header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB.
Add the new PCS USB specific offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the SM8550 compatible to the list.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SM8550 SoC uses Synopsis eUSB2 PHY for USB 2.0.
Add a new driver for it.
The driver is based on a downstream implementation.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SM8550 SoC uses Synopsis eUSB2 PHY. Add a dt-binding schema
for the new driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add the SM8550 both g4 and g3 configurations. In addition, there is a
new "lane shared" table that needs to be configured for g4, along with
the No-CSR list of resets. The no-CSR allows resetting the PHY without
actually dropping the PHY configuration. The no-CSR needs to be
deasserted only after the PHY has been configured and the PLL has
stabilized.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-9-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-8-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-7-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QMP PCIe PHY compatible for SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FUPy
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-02-10' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"A single fix for a smatch regression introduced in this merge window"
* tag 'block-6.2-2023-02-10' of git://git.kernel.dk/linux:
nvme-auth: mark nvme_auth_wq static
Split mlxplat_init() into two by adding mlxplat_pre_init().
Motivation is to prepare 'mlx-platform' driver to support systems
equipped PCIe based programming logic device.
Such systems are supposed to use different system resources, thus this
commit separates resources allocation related code.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-7-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for new L1 switch nodes providing L1 connectivity for
multi-node networking chassis.
The purpose is to provide compute server with full management and IO
subsystems with connections to L1 switches.
System contains the following components:
- COMe module based on Intel Coffee Lake CPU
- Switch baseboard with two ASICs, while
24 ports of each ASICs are connected to one backplane connector
32 ports of each ASIC are connected to 8 OSFPs
- Integrated 60mm dual-rotor FANs inside L1 node (N+2 redundancy)
- Support 48V or 54V DC input from the external power server.
Add the structures related to the new systems to allow proper activation
of the all required platform driver.
Add poweroff callback to support deep power cycle flow, which should
include special actions against CPLD device for performing graceful
operation.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-6-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Introduce support for Nvidia next-generation 800GB/s ethernet switch
SN5600.
SN5600 is 51.2 Tbps Ethernet switch based on Nvidia Spectrum-4 ASIC.
It can provide up to 64x800Gb/s (ETH) full bidirectional bandwidth per
port using PAM-4 modulations. The system supports 64 Belly to Belly 2x4
OSFP cages.
The switch was designed to fit standard 2U racks.
Features:
- 64 OSFP ports support 800GbE - 10GbE speed.
- Additional 25GbE - 1GbE service port on the front panel.
- Air-cooled with 3 + 1 redundant fan units.
- 1 + 1 redundant 3000W or 3600W PSUs.
- System management board is based on Intel Coffee-lake CPU E-2276
with secure-boot support.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename 'nvlink_blade' in several declaration to more common name
"chassis_blade", since these names are going to be used for different
kinds of blades.
Fix 'swicth' to 'switch' in comment.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change "reset_voltmon_upgrade_fail" attribute name to
"reset_pwr_converter_fail".
For systems using "mlxplat_mlxcpld_default_ng_regs_io_data", relevant
CPLD 'register.bit' indicates the failure of power converter, while on
older systems same 'register.bit' indicates failure of voltage monitor
devices upgrade failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The rack switch is designed to provide high bandwidth, low latency
connectivity using optical fiber as the primary interconnect.
System supports 32 OSFP ports, non-blocking switching capacity of
25.6Tbps.
System equipped with:
- 2 replaceable power supplies (AC) with 1+1 redundancy model.
- 7 replaceable fan drawers with 6+1 redundancy model.
- 2 External Root of Trust or EROT (Glacier) devices for securing
ASICs firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An $ARCH or a platform should select PM. Single device drivers
should only depend on PM, not select it.
Having SUN20I_PPU depend on PM removes a kconfig warning:
WARNING: unmet direct dependencies detected for PM
Depends on [n]: !MMU [=y]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
Fixes: 0ad2185dcb ("soc: sunxi: select CONFIG_PM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hopefully the last one for 6.2, a collection of the fixes that have
been gathered since the last PR. All changes are small and trivial
device-specific fixes.
-----BEGIN PGP SIGNATURE-----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=fz1j
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 6.2, a collection of the fixes that have
been gathered since the last pull.
All changes are small and trivial device-specific fixes"
* tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add Positivo N14KP6-TG
ASoC: topology: Return -ENOMEM on memory allocation failure
ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
ASoC: fsl_sai: fix getting version from VERID
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41
ASoC: codecs: es8326: Fix DTS properties reading
ASoC: tas5805m: add missing page switch.
ASoC: tas5805m: rework to avoid scheduling while atomic.
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9
ASoC: SOF: amd: Fix for handling spurious interrupts from DSP
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
ALSA: pci: lx6464es: fix a debug loop
ASoC: rt715-sdca: fix clock stop prepare timeout issue
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-3-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-2-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-1-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ID alloc and free functions don't have in built protection for parallel
invocation of ida_alloc() and ida_free(). With the current flow in the
vsec driver, there is no such scenario. But add mutex protection for
potential future changes.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230207125821.3837799-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Modify the dynamic debug print to differentiate between the regular
and spill to DRAM usage of the SMU message port.
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Based on the recommendation from the PMFW team in order to get the
recent telemetry data present on the STB DRAM the driver is required
to send one dummy write to the STB buffer, so it internally triggers
the PMFW to emit the latest telemetry data in the STB DRAM region.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent PMFWs have the support for S2D_NUM_SAMPLES message ID that
can tell the current number of samples present within the STB DRAM.
num_samples returned would let the driver know the start of the read
from the last push location. This way, the driver would emit the
top most region of the STB DRAM.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Most of the files there are being used under PDx86 subsystem or
tightly related drivers (like drivers/clk/x86/). I think it makes
sense to assure that PDx86 keeps an eye on the changes there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230206150202.27892-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
First of all, we don't use intel-family.h directly. On the other hand
we actively use boolean type, that is defined in the types.h (we take
top-level header for that) and x86_cpu_id, that is provided in the
mod_devicetable.h.
Secondly, we don't need to spread SOC_INTEL_IS_CPU() macro to the users.
Hence, undefine it when it's appropriate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230206145238.19460-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
