Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.
In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:
All SCO, eSCO, and CIS connections on a physical link should be
disconnected before the ACL connection on the same physical
connection is disconnected. If it does not, they will be
implicitly disconnected as part of the ACL disconnection.
...
Note: As specified in Section 7.7.5, on the Central, the handle
for a CIS remains valid even after disconnection and, therefore,
the Host can recreate a disconnected CIS at a later point in
time using the same connection handle.
Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.
This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:
hci_conn_unlink(conn) [conn->parent == NULL]
-> hci_conn_unlink(child) [child->parent == conn]
-> hci_conn_drop(child->parent)
-> queue_delayed_work(&conn->disc_work)
Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 06149746e7 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e16 ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746e7 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).
This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/
Fixes: 06149746e7 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
kfree()-ing the scratch page isn't enough, we also need to set the pointer
back to NULL to avoid a double-free in the case of a resend.
Fixes: fbd2a05f29 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some calls to rpc_exit_task() may deliberately change the value of
task->tk_status, for instance because it gets checked by the RPC call's
rpc_release() callback. That makes it wrong to reset the value to
task->tk_rpc_status.
In particular this causes a bug where the rpc_call_done() callback tries
to fail over a set of pNFS/flexfiles writes to a different IP address,
but the reset of task->tk_status causes nfs_commit_release_pages() to
immediately mark the file as having a fatal error.
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
kmap_atomic() is deprecated in favor of kmap_local_{folio,page}().
Therefore, replace kmap_atomic() with kmap_local_folio() in
nfs_readdir_folio_array_append().
kmap_atomic() disables page-faults and preemption (the latter only for
!PREEMPT_RT kernels), However, the code within the mapping/un-mapping in
nfs_readdir_folio_array_append() does not depend on the above-mentioned
side effects.
Therefore, a mere replacement of the old API with the new one is all that
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Tested with (x)fstests in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel
with HIGHMEM64GB enabled.
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Fixes: ec108d3cc7 ("NFS: Convert readdir page array functions to use a folio")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
goes back to 2017 (marked for stable) and a fixup to quieten a static
checker.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmRnnmQTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+UGB/9b2jo9bvRJXm3Z9baTyCYGCLmpOMYB
gUDAHY9iTZBWdxbk+YppCWyh20oXz1082DV6vMn2FBhFgv4um/7GXesoVMGin73n
5w3YB8nBW0LeFsuuLMp+tnWnsIbYxEdVmNSe5lNZX16UVRW+GUBJeLPeiJrB2YCE
NuCWw4SUxRDKU1cCHWIBjIz0qJmvbW+8U7f0OwPqk1e5QmoE9Fs44sfJ9aBX4ap7
nlPWsoNX0fRixKNcsueBHLr4xEqYG0qqyvCiZnz3r59Zlcs2HwcfixBfNnJPjDeu
3ijPm+mYjAT8Vg2mVwf2fCXAtdXlzX9+ULHZDp2VoD/0LB+E5ep08HAO
=Vixp
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A workaround for a just discovered bug in MClientSnap encoding which
goes back to 2017 (marked for stable) and a fixup to quieten a static
checker"
* tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client:
ceph: force updating the msg pointer in non-split case
ceph: silence smatch warning in reconnect_caps_cb()
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu).
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny).
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRnlBgSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxKNkP/0/DbVoou1NtLnGY1zIfz0fHPXcmOmmZ
1WZM9djlk/Yhw66EXpm6iAmtDhaXIGK4n6roCxYXKkSWlkWsnGKH105wQ3+4Z+Bh
un88fh5pgDT6XVxHMbhN6T4fHHTJ2Sg/ba6dW8pbNNsS0UivD3Qe1eBdyJTP5b48
VEiP6hjgaIvoze/NJYChtOzJiVj7hpwwV/O4Mf6qL0FKR4uOixvePFugxzX6Tatm
wcGiNio9spEUt4Nv1ROGaJIRIv8Cx5bIleTRpOMqxKEaCuwPJ9Fq4j/06PaR3JSd
0zZ7kC/l639+Rk5DDvf8gxRzmN0FsaM+beDxKbysDC1gfFNK+P9SelXAV4C2jFNk
j+s5VvecsNRBgPbSxuFNkY5u2mzYFhFew69ZKVcTddNf3aMYjbiDGYkpH1lY5zLe
yKsGZToXdGOG3+48E2zOiQxEiITbfq1SQLIZog6i/y6Na9DLyTAiTnbCBQGBObS/
200mbzLq63wBekssi7ocbpSzK+mrDY5YfKtF9lWeSnxnwTOsuDYG4HGa8OtdsDhV
YJN2wTV24yz5IALs1jwNggpQ7S3p+QdO5f2KAfKdg9lLRePz42Y2zUZ0EI7c7mK9
eddCPU/FfgECq5+EipQ9HTZJf9I350Cz2CBscoUXxwhWa7Ig28f6Hr8+peC461hE
6Oi7dIlrsyns
=w8ox
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the cpupower utility and get rid of a spurious
warning message printed to the kernel log by the ACPI cpufreq driver
after recent changes.
Specifics:
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu)
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny)
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng)"
* tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Prevent a warning when another frequency driver is loaded
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to
make the internal keyboard work on that machine (Rubén Gómez).
-----BEGIN PGP SIGNATURE-----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=y8h3
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to make the
internal keyboard work on that machine (Rubén Gómez)"
* tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRnhlAPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YGBkH+Od05zp058WjofcWmBWJUuTFc4nUMt/Atqeq
f06Y2WdiEFTyEgo9O/6hQFfuOYZBp5VcPlgBGGNPSU4JKmcWayf+ZWiVcEO1CmqN
deahkKun84ZscFj1m65r6v6o5yqgPALlFK7QCjLv5sqF8lS06QbTr0EYasjHf0Zk
9wwrCZadATv0zH5MLQoNSKBBjOznzp75IRvN0x8UYAkR413tX6lA0mCalURK7S+j
lMmb5HVY9+Gl9z4gY01ICIfAHNX39TOHzcltn7MxHcac8vCujbjhp/GJ1ZY83aRv
smleLpFi/L8pUdE4vYybATCifcuLVu0w7rxPoOVkCgt6EHkBcw==
=XC85
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Four straightforward documentation fixes"
* tag 'docs-6.4-fixes' of git://git.lwn.net/linux:
Documentation/filesystems: ramfs-rootfs-initramfs: use :Author:
Documentation/filesystems: sharedsubtree: add section headings
docs: quickly-build-trimmed-linux: various small fixes and improvements
Documentation: use capitalization for chapters and acronyms
- Add check whether the required facilities are installed
before using the s390-specific ChaCha20 implementation.
- Key blobs for s390 protected key interface IOCTLs commands
PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key
material. Zeroize copies of these keys in kernel memory
after creating protected keys.
- Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra
overhead of initializing all stack variables by default.
- Make sure that when a new channel-path is enabled all
subchannels are evaluated: with and without any devices
connected on it.
- When SMT thread CPUs are added to CPU topology masks the
nr_cpu_ids limit is not checked and could be exceeded.
Respect the nr_cpu_ids limit and avoid a warning when
CONFIG_DEBUG_PER_CPU_MAPS is set.
- The pointer to IPL Parameter Information Block is stored
in the absolute lowcore as a virtual address. Save it as
the physical address for later use by dump tools.
- Fix a Queued Direct I/O (QDIO) problem on z/VM guests using
QIOASSIST with dedicated (pass through) QDIO-based devices
such as FCP, real OSA or HiperSockets.
- s390's struct statfs and struct statfs64 contain padding,
which field-by-field copying does not set. Initialize the
respective structures with zeros before filling them and
copying to userspace.
- Grow s390 compat_statfs64, statfs and statfs64 structures
f_spare array member to cover padding and simplify things.
- Remove obsolete SCHED_BOOK and SCHED_DRAWER configs.
- Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZGd5BRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OqMAQCsdBG7eR3dp3mY8ao34dqlWt98
rDQD8oiMgCkFyn77jQEAoo3HhqWY8oTu88fl82dkF0OpGW+7zgoNHUYhH8Z0gAY=
=wtTO
-----END PGP SIGNATURE-----
Merge tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Add check whether the required facilities are installed before using
the s390-specific ChaCha20 implementation
- Key blobs for s390 protected key interface IOCTLs commands
PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key material.
Zeroize copies of these keys in kernel memory after creating
protected keys
- Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra overhead of
initializing all stack variables by default
- Make sure that when a new channel-path is enabled all subchannels are
evaluated: with and without any devices connected on it
- When SMT thread CPUs are added to CPU topology masks the nr_cpu_ids
limit is not checked and could be exceeded. Respect the nr_cpu_ids
limit and avoid a warning when CONFIG_DEBUG_PER_CPU_MAPS is set
- The pointer to IPL Parameter Information Block is stored in the
absolute lowcore as a virtual address. Save it as the physical
address for later use by dump tools
- Fix a Queued Direct I/O (QDIO) problem on z/VM guests using QIOASSIST
with dedicated (pass through) QDIO-based devices such as FCP, real
OSA or HiperSockets
- s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective
structures with zeros before filling them and copying to userspace
- Grow s390 compat_statfs64, statfs and statfs64 structures f_spare
array member to cover padding and simplify things
- Remove obsolete SCHED_BOOK and SCHED_DRAWER configs
- Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs
* tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU
s390/Kconfig: remove obsolete configs SCHED_{BOOK,DRAWER}
s390/uapi: cover statfs padding by growing f_spare
statfs: enforce statfs[64] structure initialization
s390/qdio: fix do_sqbs() inline assembly constraint
s390/ipl: fix IPIB virtual vs physical address confusion
s390/topology: honour nr_cpu_ids when adding CPUs
s390/cio: include subchannels without devices also for evaluation
s390/defconfigs: set CONFIG_INIT_STACK_NONE=y
s390/pkey: zeroize key blobs
s390/crypto: use vector instructions only if available for ChaCha20
- Avoid erroneously marking untagged pages with PG_mte_tagged
- Always reset KASAN tags for destination page in copy_page()
- Mark PMU header functions 'static inline'
- Fix some sparse warnings due to missing casts
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRnVj4QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJdMB/94LS7O5EVgx0qVg7g7D0LDs6f++eJ8Ya0V
32QSPal1KRFIBvHdyyQWdce0j+hs0mefsJ8fUTA16Jl8UrZ5U2XKzV3czvxZHjeX
AcBhw2nNVTH3vG1lXJzQLMGtgsVGXAw/DNwCgztNnlNCvyS+dpb7Gzrwv1safxni
eXs8nvyAlowzfvCWk4bNAE8ZLB4ckAAuPrzactzVJ6I397kk5i/PPUSWzG6syx3G
qPXE3XSYtlqQ/ZmGnoE/PWTGPNcieWfeQcHlIT+00tdH/FWd+rJdIb5VW0JKDtLo
Rqtpq0SfZTqg6+GdzQUbLVfOcAte3TiD7qOcA1xnT2z4IjEQGIav
=eZEU
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A mixture of compiler/static checker resolutions and a couple of MTE
fixes:
- Avoid erroneously marking untagged pages with PG_mte_tagged
- Always reset KASAN tags for destination page in copy_page()
- Mark PMU header functions 'static inline'
- Fix some sparse warnings due to missing casts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not set PG_mte_tagged if tags were not initialized
arm64: Also reset KASAN tag if page is not PG_mte_tagged
arm64: perf: Mark all accessor functions inline
ARM: perf: Mark all accessor functions inline
arm64: vdso: Pass (void *) to virt_to_page()
arm64/mm: mark private VM_FAULT_X defines as vm_fault_t
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
(atomic_read(&kvm->online_vcpus) - 1))
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b0775491 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include a definition of WARN_ON_ONCE() before using it.
Fixes: bb1fcc70d9 ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
Fixes: 8e1c18157d ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated. This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().
Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).
Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A collection of small fixes that have been gathered since rc1:
- Lots of small ASoC SOF Intel fixes
- A couple of UAF and NULL-dereference fixes
- Quirks and updates for HD-audio, USB-audio and ASoC AMD
- A few minor build / sparse warning fixes
- MAINTAINERS and DT updates
-----BEGIN PGP SIGNATURE-----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=3Pft
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered since rc1:
- Lots of small ASoC SOF Intel fixes
- A couple of UAF and NULL-dereference fixes
- Quirks and updates for HD-audio, USB-audio and ASoC AMD
- A few minor build / sparse warning fixes
- MAINTAINERS and DT updates"
* tag 'sound-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table
ALSA: oss: avoid missing-prototype warnings
ALSA: cs46xx: mark snd_cs46xx_download_image as static
ALSA: hda: Fix Oops by 9.1 surround channel names
ASoC: SOF: topology: Fix tuples array allocation
ASoC: SOF: Separate the tokens for input and output pin index
MAINTAINERS: Remove self from Cirrus Codec drivers
ASoC: cs35l56: Prevent unbalanced pm_runtime in dsp_work() on SoundWire
ASoC: SOF: topology: Fix logic for copying tuples
ASoC: SOF: pm: save io region state in case of errors in resume
ASoC: MAINTAINERS: drop Krzysztof Kozlowski from Samsung audio
ASoC: mediatek: mt8186: Fix use-after-free in driver remove path
ASoC: SOF: ipc3-topology: Make sure that only one cmd is sent in dai_config
ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling
ASoC: SOF: pcm: fix pm_runtime imbalance in error handling
ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions
ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers
ASoC: SOF: Intel: hda-mlink: initialize instance_offset member
ASoC: SOF: Intel: hda-mlink: use 'ml_addr' parameter consistently
ASoC: SOF: Intel: hda-mlink: fix base_ptr computation
...
A narrow load from a 64-bit context field results in a 64-bit load
followed potentially by a 64-bit right-shift and then a bitwise AND
operation to extract the relevant data.
In the case of a 32-bit access, an immediate mask of 0xffffffff is used
to construct a 64-bit BPP_AND operation which then sign-extends the mask
value and effectively acts as a glorified no-op. For example:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
results in the following code generation for a 64-bit field:
ldr x7, [x7] // 64-bit load
mov x10, #0xffffffffffffffff
and x7, x7, x10
Fix the mask generation so that narrow loads always perform a 32-bit AND
operation:
ldr x7, [x7] // 64-bit load
mov w10, #0xffffffff
and w7, w7, w10
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Fixes: 31fd85816d ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230518102528.1341-1-will@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Congestion control needs to be enabled only on the PFs. FW fails the
command if issued on VFs. Avoid sending the command on VFs.
Fixes: f13bcef04b ("RDMA/bnxt_re: Enable congestion control by default")
Link: https://lore.kernel.org/r/1684397461-23082-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Inside bnxt_qplib_create_cq(), when the check for NULL DPI fails, driver
returns directly without freeing the memory allocated inside
bnxt_qplib_alloc_init_hwq() routine.
Fixed this by moving the check for NULL DPI before invoking
bnxt_qplib_alloc_init_hwq().
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684397461-23082-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The __NR_execve definition for i386 was deleted by mistake
in the commit ece7f7c050 ("perf bench syscall: Add fork
syscall benchmark"), add it to fix the build error on i386.
Fixes: ece7f7c050 ("perf bench syscall: Add fork syscall benchmark")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: loongson-kernel@lists.loongnix.cn
Closes: https://lore.kernel.org/all/CA+G9fYvgBR1iB0CorM8OC4AM_w_tFzyQKHc+rF6qPzJL=TbfDQ@mail.gmail.com/
Link: https://lore.kernel.org/r/1684480657-2375-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge cpupower utility fixes for 6.4-rc3:
- Read TSC on each CPU right before reading MPERF so as to reduce the
potential time difference between the TSC and MPERF accesses and
improve the C0 percentage calculation (Wyes Karny).
- Fix a possible file handle leak and clean up the code in
sysfs_get_enabled() (Hao Zeng).
* pm-tools:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor
-----BEGIN PGP SIGNATURE-----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=eD91
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fixes for 6.4-rc3 from Shuah Khan:
"This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor"
* tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
This was using the wrong variable, "r", instead of "ddata->vcc_reg", so
it returned success instead of a negative error code.
Fixes: 0d3dbeb814 ("video: fbdev: omapfb: panel-tpo-td043mtea1: Make use of the helper function dev_err_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The rq pointer points inside the drm_gpu_scheduler structure. Thus
it can't be NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c61cdbdbff ("drm/scheduler: Fix hang when sched_entity released")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Link: https://lore.kernel.org/r/20230517125247.434103-1-VEfanov@ispras.ru
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Address the warning:
```
tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has
been renamed to ConfigParser in Python 3.2. This alias will be
removed in Python 3.12. Use ConfigParser directly instead.
parser = configparser.SafeConfigParser()
```
by removing the word 'Safe'.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously hard coded events/metrics were used, update for the use of
the TopdownL1 json metric group.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 94b1a603fc ("perf stat: Add TopdownL1 metric as a default if present")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two place if the at_xdmac_interleaved_queue_desc() fails which
could lead to a NULL dereference where "first" is NULL and we call
list_add_tail(&first->desc_node, ...). In the first caller, the return
is not checked so add a check for that. In the next caller, the return
is checked but if it fails on the first iteration through the loop then
it will lead to a NULL pointer dereference.
Fixes: 4e5385784e ("dmaengine: at_xdmac: handle numf > 1")
Fixes: 62b5cb757f ("dmaengine: at_xdmac: fix memory leak in interleaved mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/21282b66-9860-410a-83df-39c17fcf2f1b@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since host stage-2 mappings are created lazily, we cannot rely solely on
the pte in order to recover the target physical address when checking a
host-initiated memory transition as this permits donation of unmapped
regions corresponding to MMIO or "no-map" memory.
Instead of inspecting the pte, move the addr_is_allowed_memory() check
into the host callback function where it is passed the physical address
directly from the walker.
Cc: Quentin Perret <qperret@google.com>
Fixes: e82edcc75c ("KVM: arm64: Implement do_share() helper for sharing memory")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518095844.1178-1-will@kernel.org
It is host userspace, not the guest, that issues
KVM_DEV_ARM_VGIC_GRP_CTRL
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-5-jean-philippe@linaro.org
It is now config_lock that must be held, not kvm lock. Replace the
comment with a lockdep annotation.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-4-jean-philippe@linaro.org
vgic_its_create() changes the vgic state without holding the
config_lock, which triggers a lockdep warning in vgic_v4_init():
[ 358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[ 358.707410] vgic_v4_init+0x15c/0x7a8
[ 358.708550] vgic_its_create+0x37c/0x4a4
[ 358.709640] kvm_vm_ioctl+0x1518/0x2d80
[ 358.710688] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 358.711960] invoke_syscall.constprop.0+0x70/0x1e0
[ 358.713245] do_el0_svc+0xe4/0x2d4
[ 358.714289] el0_svc+0x44/0x8c
[ 358.715329] el0t_64_sync_handler+0xf4/0x120
[ 358.716615] el0t_64_sync+0x190/0x194
Wrap the whole of vgic_its_create() with config_lock since, in addition
to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic
state.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-3-jean-philippe@linaro.org
Lockdep reports a circular lock dependency between the srcu and the
config_lock:
[ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[ 262.182010] __synchronize_srcu+0xb0/0x224
[ 262.183422] synchronize_srcu_expedited+0x24/0x34
[ 262.184554] kvm_io_bus_register_dev+0x324/0x50c
[ 262.185650] vgic_register_redist_iodev+0x254/0x398
[ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724
[ 262.188087] kvm_vgic_addr+0x364/0x600
[ 262.189189] vgic_set_common_attr+0x90/0x544
[ 262.190278] vgic_v3_set_attr+0x74/0x9c
[ 262.191432] kvm_device_ioctl+0x2a0/0x4e4
[ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.195006] do_el0_svc+0xe4/0x2d4
[ 262.195929] el0_svc+0x44/0x8c
[ 262.196917] el0t_64_sync_handler+0xf4/0x120
[ 262.198238] el0t_64_sync+0x190/0x194
[ 262.199224]
[ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[ 262.201094] __lock_acquire+0x2b70/0x626c
[ 262.202245] lock_acquire+0x454/0x778
[ 262.203132] __mutex_lock+0x190/0x8b4
[ 262.204023] mutex_lock_nested+0x24/0x30
[ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0
[ 262.206178] dispatch_mmio_write+0xd8/0x258
[ 262.207498] __kvm_io_bus_write+0x1e0/0x350
[ 262.208582] kvm_io_bus_write+0xe0/0x1cc
[ 262.209653] io_mem_abort+0x2ac/0x6d8
[ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88
[ 262.211937] handle_exit+0xc4/0x39c
[ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8
[ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.217774] do_el0_svc+0xe4/0x2d4
[ 262.218758] el0_svc+0x44/0x8c
[ 262.219941] el0t_64_sync_handler+0xf4/0x120
[ 262.221110] el0t_64_sync+0x190/0x194
Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.
In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).
Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.
The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.
Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
the updates to rest of the descriptor are visible before
transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
tx descriptor.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.
Fixes: 86d7476078 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid early devlink info return if errors arise with MCDI commands
executed for getting the required info from the device. The rationale
is some commands can fail but later ones could still give useful data.
Moreover, some nvram partitions could not be present which needs to be
handled as a non error.
The specific errors are reported through system messages and if any
error appears, it will be reported generically through extack.
Fixes 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:
- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
? smcr_buf_map_link+0x24b/0x290 [smc]
? __smc_buf_create+0x4ee/0x9b0 [smc]
smc_clc_send_accept+0x4c/0xb0 [smc]
smc_listen_work+0x346/0x650 [smc]
? __schedule+0x279/0x820
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().
If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.
When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.
Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.
| Try SMCRv2 device first
| |-> conn->lgr: assign existed SMCRv2 link group;
| |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
| |-> sndbuf & RMB creation fails, quit;
|
| Try SMCRv1 device then
| |-> conn->lgr: create SMCRv1 link group and assign;
| |-> conn->link: keep SMCRv2 link mistakenly;
| |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
| initialized.
|
| Then smc_clc_send_confirm_accept() accesses
| conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
v
This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes: b60417a9f2 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NAPI gets called with budget of 0 from netpoll, which has interrupts
disabled. We should try to free some space on Tx rings and nothing
else.
Specifically do not try to handle XDP TX or try to refill Rx buffers -
we can't use the page pool from IRQ context. Don't check if IRQs moved,
either, that makes no sense in netpoll. Netpoll calls _all_ the rings
from whatever CPU it happens to be invoked on.
In general do as little as possible, the work quickly adds up when
there's tens of rings to poll.
The immediate stack trace I was seeing is:
__do_softirq+0xd1/0x2c0
__local_bh_enable_ip+0xc7/0x120
</IRQ>
<TASK>
page_pool_put_defragged_page+0x267/0x320
mlx5e_free_xdpsq_desc+0x99/0xd0
mlx5e_poll_xdpsq_cq+0x138/0x3b0
mlx5e_napi_poll+0xc3/0x8b0
netpoll_poll_dev+0xce/0x150
AFAIU page pool takes a BH lock, releases it and since BH is now
enabled tries to run softirqs.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 60bbf7eeef ("mlx5: use page_pool for xdp_return_frame call")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
tls: rx: strp: fix inline crypto offload
The local strparser version I added to TLS does not preserve
decryption status, which breaks inline crypto (NIC offload).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.
We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.
Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.
Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.
Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.
This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
