In contrast to other rmap functions, page_add_new_anon_rmap() is always
called with a freshly allocated page. That means it can't be called with
a tail page. Turn page_add_new_anon_rmap() into folio_add_new_anon_rmap()
and add a page_add_new_anon_rmap() wrapper. Callers can be converted
individually.
[akpm@linux-foundation.org: fix NOMMU build. page_add_new_anon_rmap() requires CONFIG_MMU]
[willy@infradead.org: folio-compat.c needs rmap.h]
Link: https://lkml.kernel.org/r/20230111142915.1001531-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The API for page_add_file_rmap() needs to be page-based, because we can
add mappings of individual pages. But inside the function, we want to
only call compound_head() once and then use the folio APIs instead of the
page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The API for page_add_anon_rmap() needs to be page-based, because we can
add mappings of individual pages. But inside the function, we want to
only call compound_head() once and then use the folio APIs instead of the
page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The API for page_remove_rmap() needs to be page-based, because we can
remove mappings of pages individually. But inside the function, we want
to only call compound_head() once and then use the folio APIs instead of
the page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of enforcing that the argument must be a head page by naming,
enforce it with the compiler by making it a folio. Also rename the
counter in struct folio from _compound_mapcount to _entire_mapcount.
Link: https://lkml.kernel.org/r/20230111142915.1001531-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling this 'mapcount' is confusing since mapcount is usually the number
of times something is mapped; instead this is the number of mapped pages.
It's also better to enforce that this is a folio rather than a head page.
Move folio_nr_pages_mapped() into mm/internal.h since this is not
something we want device drivers or filesystems poking at. Get rid of
folio_subpages_mapcount_ptr() and use folio->_nr_pages_mapped directly.
Link: https://lkml.kernel.org/r/20230111142915.1001531-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can use folio->_pincount directly, since all users are guarded by tests
of compound/large.
Link: https://lkml.kernel.org/r/20230111142915.1001531-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f8 ("mm/mmu_notifier:
mmu_notifier_range_update_to_read_only() helper") as an optimisation for
device drivers that know a range has only been mapped read-only. However
there are no users of this feature so remove it. As it is the only user
of the struct mmu_notifier_range.vma field remove that also.
Link: https://lkml.kernel.org/r/20230110025722.600912-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add missing kcompactd wakeup trace event for proactive compaction,
meanwhile use order = -1 and the highest zone index of the pgdat for the
kcompactd wakeup trace event by proactive compaction.
Link: https://lkml.kernel.org/r/cbf8097a2d8a1b6800991f2a21575550d3613ce6.1673342761.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The proactive compaction will reuse per-node kcompactd threads, so we
should also count the KCOMPACTD_MIGRATE_SCANNED and KCOMPACTD_FREE_SCANNED
events for proactive compaction.
Link: https://lkml.kernel.org/r/b7f1ece1adc17defa47e3667b5f9fd61f496517a.1673342761.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Some small improvements for compaction".
When I did some compaction testing, I found some small room for
improvement as well as some code cleanups.
This patch (of 5):
The compaction_suitable() will never return values other than
COMPACT_SUCCESS, COMPACT_SKIPPED and COMPACT_CONTINUE, so after validation
of COMPACT_SUCCESS and COMPACT_SKIPPED, we will never hit other unexpected
case. Thus remove the redundant VM_BUG_ON() validation for the return
values of compaction_suitable().
Link: https://lkml.kernel.org/r/cover.1673342761.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/740a2396d9b98154dba76e326cba5e798b640ead.1673342761.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameter entry of mas_preallocate is not used, so drop it.
Link: https://lkml.kernel.org/r/20230110154211.1758562-1-vernon2gm@gmail.com
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A selftest case for DAMON debugfs interface has a test for expected
failure. To make the test output clean, hide the expected failure error
message.
Link: https://lkml.kernel.org/r/20230110190400.119388-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON selftests for sysfs (sysfs.sh) tests if some writes to DAMON sysfs
interface files fails as expected. It makes the test results noisy with
the failure error message because it tests a number of such failures.
Redirect the expected failure error messages to /dev/null to make the
results clean.
Link: https://lkml.kernel.org/r/20230110190400.119388-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add links to below DAMON development related resource to DAMON section in
MAINTAINERS file.
- The basic policies and expectations of DAMON development,
- DAMON development trees, and
- DAMON introduction website.
Link: https://lkml.kernel.org/r/20230110190400.119388-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document the basic policies and expectations for DAMON development.
Link: https://lkml.kernel.org/r/20230110190400.119388-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Supports of each DAMOS action and filters are up to DAMON operations set
implementation, but it's not mentioned in detail on the documentation.
Update the information on the usage document.
Link: https://lkml.kernel.org/r/20230110190400.119388-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
What DAMON aims to do is not only access monitoring but efficient and
effective access-aware system operations. And DAMon-based Operation
Schemes (DAMOS) is the important feature of DAMON for the goal. Make the
intro of DAMON documentation to emphasize the goal and mention DAMOS.
Link: https://lkml.kernel.org/r/20230110190400.119388-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Supports of each DAMOS filter type are up to DAMON operations set
implementation in use, but not well mentioned on the kernel-doc comments.
Add the comment.
Link: https://lkml.kernel.org/r/20230110190400.119388-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: trivial fixups".
This patchset contains patches for trivial fixups of DAMON's
documentation, MAINTAINERS section, and selftests.
This patch (of 8):
Supports of each DAMOS action are up to DAMON operations set
implementation in use, but not well mentioned on the kernel-doc comments.
Add the comment.
Link: https://lkml.kernel.org/r/20230110190400.119388-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230110190400.119388-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() and kmap_atomic() have been deprecated. kmap_local_page() should
always be used in new code and the call sites of the two deprecated
functions should be converted. This latter task can lead to errors if it
is not carried out with the necessary attention to the context around and
between the maps and unmaps.
Therefore, add further information to the Highmem's documentation for the
purpose to make it clearer that (1) kmap() and kmap_atomic() must not any
longer be called in new code and (2) developers doing conversions from
kmap() amd kmap_atomic() are expected to take care of the context around
and between the maps and unmaps, in order to not break the code.
Relevant parts of this patch have been taken from messages exchanged
privately with Ira Weiny (thanks!).
[fmdefrancesco@gmail.com: merge two sentences into one, per Bagas]
Link: https://lkml.kernel.org/r/20230119123945.10471-1-fmdefrancesco@gmail.com
Link: https://lkml.kernel.org/r/20221207225308.8290-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The usual mixed bag. So far this has been a quiet cycle for IIO.
New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.
Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.
Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.
-----BEGIN PGP SIGNATURE-----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=Dfec
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.3 cycle
The usual mixed bag. So far this has been a quiet cycle for IIO.
New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.
Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.
Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.
* tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (71 commits)
iio: adc: ad7291: Fix indentation error by adding extra spaces
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
iio: imu: fix spdx format
iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
dt-bindings: iio: cleanup examples - indentation
dt-bindings: iio: use lowercase hex in examples
dt-bindings: iio: correct node names in examples
dt-bindings: iio: minor whitespace cleanups
dt-bindings: iio: drop unneeded quotes
dt-bindings: iio: adc: Add NXP IMX93 ADC
iio: adc: add imx93 adc support
dt-bindings: iio: adc: add Texas Instruments ADS7924
iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
iio: light: vcnl4000: Add interrupt support for vcnl4040
iio: light: vcnl4000: Make irq handling more generic
iio: light: vcnl4000: Prepare for more generic setup
...
========
- Fixed the module description
MHI Endpoint
============
- Powered down the MHI EP stack completely during MHI RESET instead of just
doing transfer abort as the MMIO register access will be prohibited
afterwards. EP stack will also be powered on again in case the RESET
happened due to SYS_ERR.
- Added a sanity check before processing the command ring to make sure that
the channel is supported by the controller.
- Added a check to make sure the xfer_cb is available for the channel
before trying to send the error status to the client drivers. This
helps in avoiding a potential null pointer dereference.
- Fixed the debug log of RESET command
- Modified the channel ring handler lock to protect the whole handler
instead of locking it partially. This helps in avoiding a race that may
happen if a channel STOP/RESET command is issued by the host parallely.
- Saved the MHI state locally during suspend and resume. Otherwise, the MHI
EP stack will not be aware of a channel that got disabled and may try to
access it later.
- Changed the MHI state_lock to mutex instead of spinlock. This helps in
avoiding the sleeping in atomic bug reported by Dan Carpenter and also
allows the lock to be held throughout the state change.
- Fixed the off by one error while doing the MHI channel check during
command ring processing.
MHI Generic
===========
- Updated the MHI toplevel Makefile to use Kconfig flags for building the
host and endpoint sub-directories conditionally.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmPb8WYACgkQVZ8R5v6R
zvX2CggAmMTPOB+aG+GRzyUKoBD8e2/2c7H5Oc1XDtTckePMTUo7Bw0y+0eHiE+W
+lts/XqTqaaIMNxZVhMLAQLHALX0Buj77UYMoa3NH1sJraBxcsMOJ0j1llI4Nb6J
RWlb8KHMnZw3S5GnDAKIH1Wharw2MMV8QWUEH5tjyixRJ2ZezZ+Z7nFisyzc08fV
M/M7iBOnjkCxvESCMlo985DO+/bILNK6Y+n6hez3jV8h6WEls2bqXAyrYctOQTp/
kwmEkxxNeJcc8xx5yolBPTbswT36AZVjB6txTCKjA3JK5C2oiSsWLOEXEdGu9w66
uG2WBvOd6Mjfs+sv11Xg3cXKUPz5/Q==
=p2Iy
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Fixed the module description
MHI Endpoint
============
- Powered down the MHI EP stack completely during MHI RESET instead of just
doing transfer abort as the MMIO register access will be prohibited
afterwards. EP stack will also be powered on again in case the RESET
happened due to SYS_ERR.
- Added a sanity check before processing the command ring to make sure that
the channel is supported by the controller.
- Added a check to make sure the xfer_cb is available for the channel
before trying to send the error status to the client drivers. This
helps in avoiding a potential null pointer dereference.
- Fixed the debug log of RESET command
- Modified the channel ring handler lock to protect the whole handler
instead of locking it partially. This helps in avoiding a race that may
happen if a channel STOP/RESET command is issued by the host parallely.
- Saved the MHI state locally during suspend and resume. Otherwise, the MHI
EP stack will not be aware of a channel that got disabled and may try to
access it later.
- Changed the MHI state_lock to mutex instead of spinlock. This helps in
avoiding the sleeping in atomic bug reported by Dan Carpenter and also
allows the lock to be held throughout the state change.
- Fixed the off by one error while doing the MHI channel check during
command ring processing.
MHI Generic
===========
- Updated the MHI toplevel Makefile to use Kconfig flags for building the
host and endpoint sub-directories conditionally.
* tag 'mhi-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: ep: Fix off by one in mhi_ep_process_cmd_ring()
bus: mhi: ep: Change state_lock to mutex
bus: mhi: ep: Save channel state locally during suspend and resume
bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
bus: mhi: ep: Check if the channel is supported by the controller
bus: mhi: ep: Power up/down MHI stack during MHI RESET
bus: mhi: host: Update mhi driver description
bus: mhi: Update Makefile to used Kconfig flags
Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.
As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.
This lets us drop several checks for IS_ERR(), as phy_power_{on,off}()
handle NULL parameters fine.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/3adc5dd1149a17ea7daf4463549feab886c6b145.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.
As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.
This lets us drop several checks for IS_ERR(), as phy_power_{on,off}()
handle NULL parameters fine.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/a28baf4e07e464c43aff9e52263b5a902f5da9a0.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.
As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/f2d801cd73cca36a7162819289480d7fc91fcc7e.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Conversion to gpiod API done in commit 468ba54bd6 ("fec: convert
to gpio descriptor") clashed with gpiolib applying the same quirk to the
reset GPIO polarity (introduced in commit b02c85c945). This results in
the reset line being left active/device being left in reset state when
reset line is "active low".
Remove handling of 'phy-reset-active-high' property from the driver and
rely on gpiolib to apply needed adjustments to avoid ending up with the
double inversion/flipped logic.
Fixes: 468ba54bd6 ("fec: convert to gpio descriptor")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230201215320.528319-2-dmitry.torokhov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conversion of the driver to gpiod API done in 468ba54bd6 ("fec:
convert to gpio descriptor") incorrectly made reset line mandatory and
resulted in aborting driver probe in cases where reset line was not
specified (note: this way of specifying PHY reset line is actually
deprecated).
Switch to using devm_gpiod_get_optional() and skip manipulating reset
line if it can not be located.
Fixes: 468ba54bd6 ("fec: convert to gpio descriptor")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230201215320.528319-1-dmitry.torokhov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable compile testing for jh7110. Also remove the dependency on
HW_RANDOM.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It turns out we can just modify the newer STM32 HASH driver
to be used with Ux500 and now that we have done that, delete
the old and sparsely maintained Ux500 HASH driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Ux500 has a hash block which is an ancestor to the STM32
hash block. With some minor code path additions we can
support also this variant in the STM32 driver. Differences:
- Ux500 only supports SHA1 and SHA256 (+/- MAC) so we split
up the algorithm registration per-algorithm and register
each algorithm along with its MAC variant separately.
- Ux500 does not have an interrupt to indicate that hash
calculation is complete, so we add code paths to handle
polling for completion if the interrupt is missing in the
device tree.
- Ux500 is lacking the SR status register, to check if an
operating is complete, we need to poll the HASH_STR_DCAL
bit in the HASH_STR register instead.
- Ux500 had the resulting hash at address offset 0x0c and
8 32bit registers ahead. We account for this with a special
code path when reading out the hash digest.
- Ux500 need a special bit set in the control register before
performing the final hash calculation on an empty message.
- Ux500 hashes on empty messages will be performed if the
above bit is set, but are incorrect. For this reason we
just make an inline synchronous hash using a fallback
hash.
Tested on the Ux500 Golden device with the extended tests.
Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calculating the hash using the CPU, right before the final
hash calculation, heavy testing on Ux500 reveals that it is wise
to wait for the hardware to go idle before calculating the
final hash.
The default test vectors mostly worked fine, but when I used the
extensive tests and stress the hardware I ran into this problem.
Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When exporting state we are waiting indefinitely in the same
was as the ordinary stm32_hash_wait_busy() poll-for-completion
function but without a timeout, which means we could hang in
an eternal loop. Fix this by waiting for completion like the
rest of the code.
Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We are passing (rctx->flags & HASH_FLAGS_FINUP) as indicator
for the final request but we already know this to be true since
we are in the (final) arm of an if-statement set from the same
flag. Just open-code it as true.
Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds device tree bindings for the Ux500 HASH block
as a compatible in the STM32 HASH bindings.
The Ux500 HASH binding has been used for ages in the kernel
device tree for Ux500 but was never documented, so fill in
the gap by making it a sibling of the STM32 HASH block,
which is what it is.
The relationship to the existing STM32 HASH block is pretty
obvious when looking at the register map, and I have written
patches to reuse the STM32 HASH driver on the Ux500.
The main difference from the outside is that the Ux500 HASH
lacks the interrupt line, so some special if-clauses are
needed to accomodate this in the binding.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use cpu_to_be32 instead of be32_to_cpu in img_hash_read_result_queue
to silence sparse. The generated code should be identical.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Perform a cache flush on the SEV-ES TMR memory after allocation to prevent
any possibility of the firmware encountering an error should dirty cache
lines be present. Use clflush_cache_range() to flush the SEV-ES TMR memory.
Fixes: 97f9ac3db6 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
