Two core fixes. One simply moves an annotation from put to release to
avoid the warning triggering needlessly in alua, but to keep it in
case release is ever called from that path (which we don't think will
happen). The other reverts a change to the PQ=1 target scanning
behaviour that's under intense discussion at the moment.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY9lCeiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishX7uAQDhcLu9
0YYWJfkEj41fJqcLOsai0UvSoY0oJQVBSvvyOwEA7KjLz4XNWBNE0fw3TkijOio8
YdIVb2K2sKlDo8oKM0U=
=fNIn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes.
One simply moves an annotation from put to release to avoid the
warning triggering needlessly in alua, but to keep it in case release
is ever called from that path (which we don't think will happen).
The other reverts a change to the PQ=1 target scanning behaviour
that's under intense discussion at the moment"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Revert "scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT"
scsi: core: Fix the scsi_device_put() might_sleep annotation
Syzkaller triggered a WARN in put_pmu_ctx().
WARNING: CPU: 1 PID: 2245 at kernel/events/core.c:4925 put_pmu_ctx+0x1f0/0x278
This is because there is no locking around the access of "if
(!epc->ctx)" in find_get_pmu_context() and when it is set to NULL in
put_pmu_ctx().
The decrement of the reference count in put_pmu_ctx() also happens
outside of the spinlock, leading to the possibility of this order of
events, and the context being cleared in put_pmu_ctx(), after its
refcount is non zero:
CPU0 CPU1
find_get_pmu_context()
if (!epc->ctx) == false
put_pmu_ctx()
atomic_dec_and_test(&epc->refcount) == true
epc->refcount == 0
atomic_inc(&epc->refcount);
epc->refcount == 1
list_del_init(&epc->pmu_ctx_entry);
epc->ctx = NULL;
Another issue is that WARN_ON for no active PMU events in put_pmu_ctx()
is outside of the lock. If the perf_event_pmu_context is an embedded
one, even after clearing it, it won't be deleted and can be re-used. So
the warning can trigger. For this reason it also needs to be moved
inside the lock.
The above warning is very quick to trigger on Arm by running these two
commands at the same time:
while true; do perf record -- ls; done
while true; do perf record -- ls; done
[peterz: atomic_dec_and_raw_lock*()]
Fixes: bd27568117 ("perf: Rewrite core context handling")
Reported-by: syzbot+697196bc0265049822bd@syzkaller.appspotmail.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230127143141.1782804-2-james.clark@arm.com
-----BEGIN PGP SIGNATURE-----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=Q6E+
-----END PGP SIGNATURE-----
Merge tag 'media/v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of v4l2 core fixes:
- fix a regression on strings control support
- fix a regression for some drivers that depend on an odd streaming
behavior"
* tag 'media/v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: set q->streaming later
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
Reading DR[0-3]_ADDR_MASK MSRs takes about 250 cycles which is going to
be noticeable with the AMD KVM SEV-ES DebugSwap feature enabled. KVM is
going to store host's DR[0-3] and DR[0-3]_ADDR_MASK before switching to
a guest; the hardware is going to swap these on VMRUN and VMEXIT.
Store MSR values passed to set_dr_addr_mask() in percpu variables
(when changed) and return them via new amd_get_dr_addr_mask().
The gain here is about 10x.
As set_dr_addr_mask() uses the array too, change the @dr type to
unsigned to avoid checking for <0. And give it the amd_ prefix to match
the new helper as the whole DR_ADDR_MASK feature is AMD-specific anyway.
While at it, replace deprecated boot_cpu_has() with cpu_feature_enabled()
in set_dr_addr_mask().
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230120031047.628097-2-aik@amd.com
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These sysfs nodes are tested supported, so enable them.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.
Ensure that they're set during initialization.
Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable HDP clock gating control for gfx 11.0.3.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- fix linux dp link lost handled only one time
- Reset DMUB mailbox SW state after HW reset
- Unassign does_plane_fit_in_mall function from dcn3.2
- Add Function delaration in dc_link
- Fix crash when connecting 2 displays with video playback
- Adjust downscaling limits for dcn314
- fix FCLK pstate change underflow
- Fix only one ABM pipe enabled under ODM combined case
- Add missing brackets in calculation
- Correct bw_params population
- Fix Z8 support configurations
- Add Debug Log for MST and PCON
- fix MALL size hardcoded for DCN321
- add rc_params_override option in dc_dsc_config
- Enable Freesync over PCon
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
linux amdgpu defer handle link lost irq. dm add handle
request to irq work queue for the first irq of link lost.
if link training fails for link lost handle, link will not
be enabled anymore.
[How]
allow adding handle request of link lost to work queue
before running dp link training for link lost.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Housekeeping cleaning and adding declaration for
function to be called from DM layer
[HOW]
Adding public functions to dc_link.h
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7cf5ceb30d.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314
[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported
[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM set pipe before updating ODM status,
it leads to incorrect ABM pipe setting when enabling ODM combine.
[How]
Call ABM set pipe flow after ODM status update in program pipe sequence.
Reviewed-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START
[How]
Add missing brackets for this calculation
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow observed during P010 video playback on
dcn314 due to incorrectly populated bw_params
[How]
Populate fclk, memclk and voltage in bw_params with
values from max pstate rather than min pstate
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add log for MST/PCON specific use case:
1. If DP1.2 hub where gives reduced link bw and no dsc support.
2. If less than 4-lane configuration where gives reduced bw.
3. If FRL PCON enabled for asic.
4. Track MST sink count.
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs
MALL size was still hardcoded for DCN321
[How]
Remove hardcoding MALL size for DCN321
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enable Freesync over PCon on Linux environment.
[how]
Adding Freesync over PCon support in amdgpu_dm
- Read DPCD for Freesync over PCon capabilitiy
- Add whitelist for compatible branch devices
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We guard the suspend entry code from running unless we have proper
BIOS support for either S3 mode or s0ix mode.
If a user's system doesn't support either of these modes the kernel
still does offer s2idle in `/sys/power/mem_sleep` so there is an
expectation from users that it works even if the power consumption
remains very high.
Rafael Ávila de Espíndola reports that a system of his has a
non-functional graphics stack after resuming. That system doesn't
support S3 and the FADT doesn't indicate support for low power idle.
Through some experimentation it was concluded that even without the
hardware s0i3 support provided by the amd_pmc driver the power
consumption over suspend is decreased by running amdgpu's s0ix
suspend routine.
The numbers over suspend showed:
* No patch: 9.2W
* Skip amdgpu suspend entirely: 10.5W
* Run amdgpu s0ix routine: 7.7W
As this does improve the power, remove some of the guard rails in
`amdgpu_acpi.c` for only running s0ix suspend routines in the right
circumstances.
However if this turns out to cause regressions for anyone, we should
revert this change and instead opt for skipping suspend/resume routines
entirely or try to fix the underlying behavior that makes graphics fail
after resume without underlying platform support.
Reported-by: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fac53471d0.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function just assigns a summary entry. This can be done entirely
typesafe with an open code struct assignment that relies on array
indexing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 7a10f0177e ("f2fs: don't give partially written atomic data
from process crash") attempted to drop atomic write data after process
crash, however, f2fs_abort_atomic_write() may be called from noncrash
case, fix it by adding missed PF_EXITING check condition
f2fs_file_flush().
- application crashs
- do_exit
- exit_signals -- sets PF_EXITING
- exit_files
- put_files_struct
- close_files
- filp_close
- flush (f2fs_file_flush)
- check atomic_write_task && PF_EXITING
- f2fs_abort_atomic_write
Fixes: 7a10f0177e ("f2fs: don't give partially written atomic data from process crash")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Files created by truncate have a size but no blocks, so
they can be allowed to set compression option.
Fixes: e1e8debec6 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block. Fix this by zero-initializing the block.
This bug was introduced by commit 4ec17d688d ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.
This was found by running xfstest generic/435 on a KMSAN-enabled kernel.
Fixes: 4ec17d688d ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When aops->write_begin() does not initialize fsdata, KMSAN may report
an error passing the latter to aops->write_end().
Fix this by unconditionally initializing fsdata.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 95ae251fe8 ("f2fs: add fs-verity support")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
hot_data_age_threshold is a non-zero positive number, and
condition 2 includes condition 1, so there is no need to
additionally judge whether t is 0. And let's remove it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_issue_discard_timeout() returns whether discard cmds are dropped,
which does not match the meaning of the function. Let's change it to
return whether all discard cmd are issued.
After commit 4d67490498 ("f2fs: Don't create discard thread when
device doesn't support realtime discard"), f2fs_issue_discard_timeout()
is alse called by f2fs_remount(). Since the comments of
f2fs_issue_discard_timeout() doesn't make much sense, let's update it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
commit 3fde13f817 ("f2fs: compress: support compress level") introduce
compress level, which macro(COMPRESS_LEVEL_OFFSET) is 8, But use wrong
comment about compress level.
Let's fix it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_read_inode(), sanity_check_inode() should be called after
f2fs_init_read_extent_tree(), fix it.
Fixes: 72840cccc0 ("f2fs: allocate the extent_cache by default")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_rename() has checked CP_ERROR_FLAG, so remove redundant check
in f2fs_create_whiteout().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 2b3f056f72 moved a blk_put_queue() call from
blk_mq_destroy_queue() into its callers. Reflect this change in the
documentation block above blk_mq_destroy_queue().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 2b3f056f72 ("blk-mq: move the call to blk_put_queue out of blk_mq_destroy_queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230130211233.831613-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support to retrieve VDM attention messages and forward them to the
appropriate alt mode driver.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230126205620.3714994-2-pmalani@chromium.org
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") caused ima_file_mmap() to receive the
protections requested by the application and not those applied by the
kernel.
After restoring the original MMAP_CHECK behavior, existing attestation
servers might be broken due to not being ready to handle new entries
(previously missing) in the IMA measurement list.
Restore the original correct MMAP_CHECK behavior, instead of keeping the
current buggy one and introducing a new hook with the correct behavior.
Otherwise, there would have been the risk of IMA users not noticing the
problem at all, as they would actively have to update the IMA policy, to
switch to the correct behavior.
Also, introduce the new MMAP_CHECK_REQPROT hook to keep the current
behavior, so that IMA users could easily fix a broken attestation server,
although this approach is discouraged due to potentially missing
measurements.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function __get_mem_detect_block() resets start and end
output parameters in case of invalid mem_detect array
index is provided. That violates the rule of sparing
the output on fail path and leads e.g to a below anomaly:
for_each_mem_detect_block(i, &start, &end)
continue;
One would expect start and end contain addresses of the
last memory block (if available), but in fact the two
will be reset to zeroes. That is not how an iterator is
expected to work.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Unbinding an I/O subchannel with a child-CCW device in disconnected
state sometimes causes a kernel-panic. The race condition was seen
mostly during testing, when setting all the CHPIDs of a device to
offline and at the same time, the unbinding the I/O subchannel driver.
The kernel-panic occurs because of double delete, the I/O subchannel
driver calls device_del on the CCW device while another device_del
invocation for the same device is in-flight. For instance, disabling
all the CHPIDs will trigger the ccw_device_remove function, which will
call a ccw_device_unregister(), which ends up calling the device_del()
which is asynchronous via cdev's todo workqueue. And unbinding the I/O
subchannel driver calls io_subchannel_remove() function which calls the
ccw_device_unregister() and device_del().
This double delete can be prevented by serializing all CCW device
registration/unregistration calls into the driver core. This patch
introduces a mutex which will be used for this purpose.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
---[ Real Memory Copy Area Start ]---
0x001bfffffffff000-0x001c000000000000 4K PTE I
---[ Kasan Shadow Start ]---
---[ Real Memory Copy Area End ]---
0x001c000000000000-0x001c000200000000 8G PMD RW NX
...
---[ Kasan Shadow End ]---
ptdump does a stable sort of markers. Move kasan markers after
memcpy real to avoid swapping.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
setup_vmem() already calls populate for all online memory regions.
pgtable_populate_end() could be removed.
Also rename pgtable_populate_begin() to pgtable_populate_init().
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit bb1520d581 ("s390/mm: start kernel with DAT enabled")
doesn't consider online memory holes due to potential memory offlining
and erroneously creates pgtables for stand-by memory, which bear RW+X
attribute and trigger a warning:
RANGE SIZE STATE REMOVABLE BLOCK
0x0000000000000000-0x0000000c3fffffff 49G online yes 0-48
0x0000000c40000000-0x0000000c7fffffff 1G offline 49
0x0000000c80000000-0x0000000fffffffff 14G online yes 50-63
0x0000001000000000-0x00000013ffffffff 16G offline 64-79
s390/mm: Found insecure W+X mapping at address 0xc40000000
WARNING: CPU: 14 PID: 1 at arch/s390/mm/dump_pagetables.c:142 note_page+0x2cc/0x2d8
Map only online memory ranges which fit within identity mapping limit.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1ab2 ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Link: 6a7ede3dfc
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
