Stop mentioning #address-cells/#size-cells which are defined in
display/dsi-controller.yaml. Use unevaluatedProperties instead of
additionalProperties to allow skipping properties defined in other
schema files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518809/
Link: https://lore.kernel.org/r/20230118032432.1716616-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently we do not differentiate between the various users of the
qcom,mdss-dsi-ctrl. The driver is flexible enough to operate from one
compatible string but, the hardware does have some significant differences
in the number of clocks.
To facilitate documenting the clocks add the following compatible strings
- qcom,apq8064-dsi-ctrl
- qcom,msm8916-dsi-ctrl
- qcom,msm8953-dsi-ctrl
- qcom,msm8974-dsi-ctrl
- qcom,msm8996-dsi-ctrl
- qcom,msm8998-dsi-ctrl
- qcom,sc7180-dsi-ctrl
- qcom,sc7280-dsi-ctrl
- qcom,sdm660-dsi-ctrl
- qcom,sdm845-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
- qcom,qcm2290-dsi-ctrl
Deprecate qcom,dsi-ctrl-6g-qcm2290 in favour of the desired format while we
do so.
Several MDSS yaml files exist which document the dsi sub-node.
For each existing SoC MDSS yaml, provide the right dsi compat string.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519078/
Link: https://lore.kernel.org/r/20230118171621.102694-2-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)
This series contains updates to iavf driver only.
Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.
Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.
Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: schedule watchdog immediately when changing primary MAC
iavf: Move netdev_update_features() into watchdog task
iavf: fix temporary deadlock and failure to set MAC address
====================
Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY initialization is supposed to run on every mode changes.
"lan87xx_config_aneg()" verifies every mode change using
"phy_modify_changed()" function. Earlier code had phy_modify_changed()
followed by genphy_soft_reset. But soft_reset resets all the
pre-configured register values to default state, and lost all the
initialization done. With this reason gen_phy_reset was removed.
But it need to go through init sequence each time the mode changed.
Update lan87xx_config_aneg() to invoke phy_init once successful mode
update is detected.
PHY init sequence added in lan87xx_phy_init() have slave init
commands executed every time. Update the init sequence to run
slave init only if phydev is in slave mode.
Test setup contains LAN9370 EVB connected to SAMA5D3 (Running DSA),
and issue can be reproduced by connecting link to any of the available
ports after SAMA5D3 boot-up. With this issue, port will fail to
update link state. But once the SAMA5D3 is reset with LAN9370 link in
connected state itself, on boot-up link state will be reported as UP. But
Again after some time, if link is moved to DOWN state, it will not get
reported.
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120104733.724701-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss says:
====================
net: dsa: microchip: add support for credit based shaper
LAN937x switch family, KSZ9477, KSZ9567, KSZ9563 and KSZ8563 supports
the credit based shaper. But there were few difference between LAN937x and KSZ
switch like
- number of queues for LAN937x is 8 and for others it is 4.
- size of credit increment register for LAN937x is 24 and for other is 16-bit.
This patch series add the credit based shaper with common implementation for
LAN937x and KSZ swithes.
====================
Link: https://lore.kernel.org/r/20230120052135.32120-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ9477, KSZ9567, KSZ9563, KSZ8563 and LAN937x supports Credit based
shaper. To differentiate the chip supporting cbs, tc_cbs_supported
flag is introduced in ksz_chip_data.
And KSZ series has 16bit Credit increment registers whereas LAN937x has
24bit register. The value to be programmed in the credit increment is
determined using the successive multiplication method to convert decimal
fraction to hexadecimal fraction.
For example: if idleslope is 10000 and sendslope is -90000, then
bandwidth is 10000 - (-90000) = 100000.
The 10% bandwidth of 100Mbps means 10/100 = 0.1(decimal). This value has
to be converted to hexa.
1) 0.1 * 16 = 1.6 --> fraction 0.6 Carry = 1 (MSB)
2) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
3) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
4) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
5) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
6) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 (LSB)
Now 0.1(decimal) becomes 0.199999(Hex).
If it is LAN937x, 24 bit value will be programmed to Credit Inc
register, 0x199999. For others 16 bit value will be prgrammed, 0x1999.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LAN937x family of switches has 8 queues per port where the KSZ switches
has 4 queues per port. By default, only one queue per port is enabled.
The queues are configurable in 2, 4 or 8. This patch add 8 number of
queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb
buffer and the corresponding value is updated in the tag.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The spin_lock irqsave/restore API variant in skb_defer_free_flush can
be replaced with the faster spin_lock irq variant, which doesn't need
to read and restore the CPU flags.
Using the unconditional irq "disable/enable" API variant is safe,
because the skb_defer_free_flush() function is only called during
NAPI-RX processing in net_rx_action(), where it is known the IRQs
are enabled.
Expected gain is 14 cycles from avoiding reading and restoring CPU
flags in a spin_lock_irqsave/restore operation, measured via a
microbencmark kernel module[1] on CPU E5-1650 v4 @ 3.60GHz.
Microbenchmark overhead of spin_lock+unlock:
- spin_lock_unlock_irq cost: 34 cycles(tsc) 9.486 ns
- spin_lock_unlock_irqsave cost: 48 cycles(tsc) 13.567 ns
We don't expect to see a measurable packet performance gain, as
skb_defer_free_flush() is called infrequently once per NIC device NAPI
bulk cycle and conditionally only if SKBs have been deferred by other
CPUs via skb_attempt_defer_free().
[1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/time_bench_sample.c
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/167421646327.1321776.7390743166998776914.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix overlap detection in rbtree set backend: Detect overlap by going
through the ordered list of valid tree nodes. To shorten the number of
visited nodes in the list, this algorithm descends the tree to search
for an existing element greater than the key value to insert that is
greater than the new element.
2) Fix for the rbtree set garbage collector: Skip inactive and busy
elements when checking for expired elements to avoid interference
with an ongoing transaction from control plane.
This is a rather large fix coming at this stage of the 6.2-rc. Since
33c7aba0b4 ("netfilter: nf_tables: do not set up extensions for end
interval"), bogus overlap errors in the rbtree set occur more frequently.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
====================
Link: https://lore.kernel.org/r/20230123211601.292930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My responsibilities at Intel have changed, so I'm handing off exclusive
MPTCP subsystem maintainer duties to Matthieu. It has been a privilege
to see MPTCP through its initial upstreaming and first few years in the
upstream kernel!
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20230120231121.36121-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting with commit eee16b1471 ("net: dsa: microchip: perform the
compatibility check for dev probed"), the KSZ switch driver now bails
out if it thinks the DT compatible doesn't match the actual chip ID
read back from the hardware:
ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found
KSZ8563, please fix it!
For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine
at first, because it indeed shares the same chip id as the KSZ9893.
Commit b449080956 ("net: dsa: microchip: add separate struct
ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893
compatible chips by consulting the 0x1F register. The resulting breakage
was fixed for the SPI driver in the same commit by introducing the
appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver.
Fix this for I2C-connected KSZ8563 now to get it probing again.
Fixes: b449080956 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip").
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bug was introduced by commit eedade12f4 ("net: kfree_skb_list use
kmem_cache_free_bulk"). It unconditionally unlinked the SKB list via
invoking skb_mark_not_on_list().
In this patch we choose to remove the skb_mark_not_on_list() call as it
isn't necessary. It would be possible and correct to call
skb_mark_not_on_list() only when __kfree_skb_reason() returns true,
meaning the SKB is ready to be free'ed, as it calls/check skb_unref().
This fix is needed as kfree_skb_list() is also invoked on skb_shared_info
frag_list (skb_drop_fraglist() calling kfree_skb_list()). A frag_list can
have SKBs with elevated refcnt due to cloning via skb_clone_fraglist(),
which takes a reference on all SKBs in the list. This implies the
invariant that all SKBs in the list must have the same refcnt, when using
kfree_skb_list().
Reported-by: syzbot+c8a2e66e37eee553c4fd@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c8a2e66e37eee553c4fd@syzkaller.appspotmail.com
Fixes: eedade12f4 ("net: kfree_skb_list use kmem_cache_free_bulk")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/167421088417.1125894.9761158218878962159.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
if (!type)
continue;
if (type > RTAX_MAX)
return false;
...
fi_val = fi->fib_metrics->metrics[type - 1];
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 5f9ae3d9e7 ("ipv4: do metrics match when looking up and deleting a route")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133140.3624204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 6cf9dfd3bd ("net: fib: move metrics parsing to a helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133040.3623463-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
netlink: annotate various data races
A recent syzbot report came to my attention.
After addressing it, I also fixed other related races.
====================
Link: https://lore.kernel.org/r/20230120125955.3453768-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netlink_getsockbyportid() reads sk_state while a concurrent
netlink_connect() can change its value.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid()
can read nlk->dst_portid and nlk->dst_group while another
thread is changing them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "eport" variable needs to be initialized to NULL for this code to
work.
Fixes: 814e769320 ("net: microchip: vcap api: Add a storage state to a VCAP rule")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/Y8qbYAb+YSXo1DgR@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If mdiobus_get_phy() is called with an invalid addr parameter, then the
caller has a bug. Print a call trace to help identifying the caller.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/daec3f08-6192-ba79-f74b-5beb436cab6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First set of patches for v6.3. The most important change here is that
the old Wireless Extension user space interface is not supported on
Wi-Fi 7 devices at all. We also added a warning if anyone with modern
drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless
Extensions, everyone should switch to using nl80211 interface instead.
Static WEP support is removed, there wasn't any driver using that
anyway so there's no user impact. Otherwise it's smaller features and
fixes as usual.
Note: As mt76 had tricky conflicts due to the fixes in wireless tree,
we decided to merge wireless into wireless-next to solve them easily.
There should not be any merge problems anymore.
Major changes:
cfg80211
* remove never used static WEP support
* warn if Wireless Extention interface is used with cfg80211/mac80211 drivers
* stop supporting Wireless Extensions with Wi-Fi 7 devices
* support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting
rfkill
* add GPIO DT support
bitfield
* add FIELD_PREP_CONST()
mt76
* per-PHY LED support
rtw89
* support new Bluetooth co-existance version
rtl8xxxu
* support RTL8188EU
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmPOYeQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvSlAf/Y5ZY5xLEytUma7fBkBObXEfP/7tlBBsu
RoRKVx77D1LGfGu0WXG9PCdvyY70e2QtrkdeLHF3gfzLYpNZIyB/eOFhwzCtbJrD
ls2yXhdTm9OwDOHAdvXLXx3fmF4bXni7dYdi78VrGCFOnU6XE6X5JpnZYU1SmQ1U
8Ro7H6D9yp8MKfh5Ct19PYSTS5hmHB09vfJ4rbkjHp7kEGvJjYNbvAqGsxatPnh9
Zw35TEIwmhZO4GsXxsG12g6LZa8W8RO8uCwepHxtFM8oGsF68Yb/lkLcdtMiuN6V
WdB6qn24faEWjdmt5BzJGueA3Td8KI6t5cHhGbQVKjyFD8lAC+IJQA==
=Nq9U
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that
the old Wireless Extension user space interface is not supported on
Wi-Fi 7 devices at all. We also added a warning if anyone with modern
drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless
Extensions, everyone should switch to using nl80211 interface instead.
Static WEP support is removed, there wasn't any driver using that
anyway so there's no user impact. Otherwise it's smaller features and
fixes as usual.
Note: As mt76 had tricky conflicts due to the fixes in wireless tree,
we decided to merge wireless into wireless-next to solve them easily.
There should not be any merge problems anymore.
Major changes:
cfg80211
- remove never used static WEP support
- warn if Wireless Extention interface is used with cfg80211/mac80211 drivers
- stop supporting Wireless Extensions with Wi-Fi 7 devices
- support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting
rfkill
- add GPIO DT support
bitfield
- add FIELD_PREP_CONST()
mt76
- per-PHY LED support
rtw89
- support new Bluetooth co-existance version
rtl8xxxu
- support RTL8188EU
* tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits)
wifi: wireless: deny wireless extensions on MLO-capable devices
wifi: wireless: warn on most wireless extension usage
wifi: mac80211: drop extra 'e' from ieeee80211... name
wifi: cfg80211: Deduplicate certificate loading
bitfield: add FIELD_PREP_CONST()
wifi: mac80211: add kernel-doc for EHT structure
mac80211: support minimal EHT rate reporting on RX
wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf
wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf
wifi: cfg80211: Use MLD address to indicate MLD STA disconnection
wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
wifi: cfg80211: remove support for static WEP
wifi: rtl8xxxu: Dump the efuse only for untested devices
wifi: rtl8xxxu: Print the ROM version too
wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update()
wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter()
wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: rtl8xxxu: Report the RSSI to the firmware
...
====================
Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AX88796C device node on SPI bus can use SPI peripheral properties in
certain configurations:
exynos3250-artik5-eval.dtb: ethernet@0: 'controller-data' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120144329.305655-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 72653ae530 ("selftests: net: tcp_mmap:
Use huge pages in send path") I made a change to use hugepages
for the buffer used by the client (tx path)
Today, I understood that the cause for poor zerocopy
performance was that after a mmap() for a 512KB memory
zone, kernel uses a single zeropage, mapped 128 times.
This was really the reason for poor tx path performance
in zero copy mode, because this zero page refcount is
under high pressure, especially when TCP ACK packets
are processed on another cpu.
We need either to force a COW on all the memory range,
or use MAP_POPULATE so that a zero page is not abused.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120181136.3764521-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bart Van Assche <bvanassche@acm.org> says:
The third patch in this series enables DMA clustering in the UFS
driver since UFS host controllers support DMA clustering. The first
two patches fix bugs in the Exynos host controller driver.
Link: https://lore.kernel.org/r/20230112234215.2630817-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All UFS host controllers support DMA clustering. Hence enable DMA
clustering.
Notes:
- The max_segment_size parameter implements the 256 KiB limit for the
PRDT. The dma_boundary parameter represents a boundary that must not be
crossed by DMA scatter/gather lists. I'm not aware of any restrictions
on DMA scatter/gather lists in the UFSHCI specification other than the
256 KiB limit for the PRDT and the 32-bit address restriction for
controllers that only support 32-bits DMA. The latter restriction is
already handled by ufshcd_set_dma_mask().
- Without patch "scsi: ufs: exynos: Fix the maximum segment size", this
patch breaks support for the Exynos controller.
The history of the dma_boundary parameter in the UFS driver is as
follows:
* The initial UFS driver did not set the dma_boundary parameter.
* Commit 4dd4130a72 ("scsi: make sure all drivers set the use_clustering
flag") set the .use_clustering flag.
* Commit 4af14d113b ("scsi: remove the use_clustering flag") removed the
use_clustering flag and set the dma_boundary parameter instead.
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for enabling DMA clustering and also for supporting PAGE_SIZE !=
4096 by declaring explicitly that the maximum segment size is 4096 bytes
for Exynos UFS host controllers. Add this code in
exynos_ufs_hce_enable_notify() such that it happens after scsi_host_alloc()
and before __scsi_init_queue() is called by the LUN scanning code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa5 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A logical evaluation of type (!A || A && B) can be simplified as (!A || B).
Improvement by suggested by excluded_middle.cocci Coccinelel semantic
patch.
Link: https://lore.kernel.org/r/Y7+oJuah0MgEW0PQ@ubun2204.myguest.virtualbox.org
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use a variable to compute memory size to be allocated once instead of
repeatedly computing it at different locations in the function. Issue
identified using the array_size_dup Coccinelle semantic patch.
Link: https://lore.kernel.org/r/Y7spwF8HTt0c0l7y@ubun2204.myguest.virtualbox.org
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During suspend, we see failures to suspend 1 in 300-500 suspends.
Looking closer, it appears that asynchronous RCU callbacks are being
queued as lazy even though synchronous callbacks are expedited. These
delays appear to not be very welcome by the suspend/resume code as
evidenced by these occasional suspend failures.
This commit modifies call_rcu() to check if rcu_async_should_hurry(),
which will return true if we are in suspend or in-kernel boot.
[ paulmck: Alphabetize local variables. ]
Ignoring the lazy hint makes the 3000 suspend/resume cycles pass
reliably on a 12th gen 12-core Intel CPU, and there is some evidence
that it also slightly speeds up boot performance.
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
That register became a multicast register as of Xe_HP and it is
currently used only for DG2. Use a proper prefix since there could be
usage of the same register for previous platforms in the future, which
would require a different definition (i.e. using _MMIO).
Note that, in its current state, the code does not cause functional
problems, since the actual application of the workaround would
implicitly use multicast mode. This fix is more toward consistency and
being future-proof uses of this register outside of workarounds.
v2:
- Add paragraph noting that this change is for consistency and
making the code future-proof. (Matt)
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Atwood <matthew.s.atwood@intel.com>
Fixes: 468a4e630c ("drm/i915/dg2: Introduce Wa_18018764978")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120181423.90507-1-gustavo.sousa@intel.com
On all variants of the hardware, the internal oscillator is one possible
parent for the AR100 clock. It needs to be exported so we can model that
relationship correctly in the devicetree.
Fixes: c56afc1844 ("rtc: sun6i: Expose internal oscillator through device tree")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221229215319.14145-1-samuel@sholland.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Document the binding for the LS2X RTC block found on the Loongson-2K SoC
and the LS7A bridge, originally appearing on the Loongson-2H.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0288efeb4209e4a49af07de6399045aaa00a970c.1673227292.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The type for operating-points-v2 property is coming from dtschema
(/schemas/opp/opp.yaml), so individual bindings can just use simple
"true".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230119131033.117324-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The child nodes 'pinctrl', 'usb-hub', and 'clock-controller' in the
socionext,uniphier-soc-glue binding are not patterns, but the full node
name, so move them to 'properties'. As patterns, they were missing start
and end anchors so any prefix or suffix was allowed.
Fixes: 0611adff8b ("dt-bindings: soc: socionext: Add UniPhier SoC-glue logic")
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230120020339.3223112-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In preparation for adding a second interrupt to service RTC
interrupts, the existing interrupt is renamed from the generic
'irq' to 'wake_irq' to more clearly convey its role.
It is also converted to an unsigned int.
Finally, the driver message that outputs the IRQ number when
registered is removed since devm_rtc_register_device() already
provides a report of registration and the interrupts can be
found in /proc/interrupts.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120190147.718976-5-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since the WKTMR hardware block cannot be disabled it is necessary
for the driver to accommodate for associated timing hazards. This
commit targets the following possibilities:
A possible race between clearing a wktmr event and the alarm expiring
is made one-sided by setting the alarm to its maximum value before
clearing the event.
Programming alarm values close to the current time may not trigger
events if the counter advances while the alarm is being programmed.
After programming an alarm, a check is made to ensure that it is
either in the future or an expiration event is pending.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120190147.718976-4-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
These changes are not intended to affect functionality, but
simplify the source code. They are performed here to simplify
review and reduce confusion with other changes in this set.
Since set_alarm includes the alarm_irq_enable functionality call
it directly from that function for simplicity (even though it
does nothing at the moment). The order of the declarations is
changed to prevent the need for a prototype.
The function device_init_wakeup() is used to replace the
functions device_set_wakeup_capable() and device_wakeup_enable()
since it is equivalent.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120190147.718976-3-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit defines bit 0 as the bit of interest within the
BRCMSTB_WKTMR_EVENT register to make the implementation more
readable.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120190147.718976-2-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The following registers do not exist on gen4, so we should not write
them: DEF6Rm, DEF7Rm, DEF8Rm, ESCRn, OTARn.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
