We will add support for pMAC counters and MAC merge layer counters,
which are only reported via the structured stats, and the current
ocelot_get_strings() stands in our way, because it expects that the
statistics should be placed in the data array at the same index as found
in the ocelot_stats_layout array.
That is not true. Statistics which don't have a name should not be
exported to the unstructured ethtool -S, so we need to have different
indices into the ocelot_stats_layout array (i) and into the data array
(data itself).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA core is in charge of the ethtool_ops of the net devices
associated with switch ports, so in case a hardware driver supports the
MAC merge layer, DSA must pass the callbacks through to the driver.
Add support for precisely that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We deliberately make the Linux UAPI pass the minimum fragment size in
octets, even though IEEE 802.3 defines it as discrete values, and
addFragSize is just the multiplier. This is because there is nothing
impossible in operating with an in-between value for the fragment size
of non-final preempted fragments, and there may even appear hardware
which supports the in-between sizes.
For the hardware which just understands the addFragSize multiplier,
create two helpers which translate back and forth the values passed in
octets.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a pMAC exists but the driver is unable to atomically query the
aggregate eMAC+pMAC statistics, the user should be given back at least
the sum of eMAC and pMAC counters queried separately.
This is a generic problem, so add helpers in ethtool to do this
operation, if the driver doesn't have a better way to report aggregate
stats. Do this in a way that does not require changes to these functions
when new stats are added (basically treat the structures as an array of
u64 values, except for the first element which is the stats source).
In include/linux/ethtool.h, there is already a section where helper
function prototypes should be placed. The trouble is, this section is
too early, before the definitions of struct ethtool_eth_mac_stats et.al.
Move that section at the end and append these new helpers to it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two new netlink attributes were added to PAUSE_GET and STATS_GET and
their replies. Document them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an
Express MAC and a Preemptible MAC. Both MACs are hidden to higher and
lower layers and visible as a single MAC (packet classification to eMAC
or pMAC on TX is done based on priority; classification on RX is done
based on SFD).
For devices which support a MAC Merge sublayer, it is desirable to
retrieve individual packet counters from the eMAC and the pMAC, as well
as aggregate statistics (their sum).
Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the
policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC
which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when
ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these
take values from enum ethtool_mac_stats_src, defaulting to "aggregate"
in the absence of the attribute.
Existing drivers do not need to pay attention to this enum which was
added to all driver-facing structures, just the ones which report the
MAC merge layer as supported.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Show details about the structures passed back and forth related to MAC
Merge layer configuration, state and statistics. The rendered htmldocs
will be much more verbose due to the kerneldoc references.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2
specifications (the other being Frame Preemption; IEEE 802.1Q-2018
clause 6.7.2), which work together to minimize latency caused by frame
interference at TX. The overall goal of TSN is for normal traffic and
traffic with a bounded deadline to be able to cohabitate on the same L2
network and not bother each other too much.
The standards achieve this (partly) by introducing the concept of
preemptible traffic, i.e. Ethernet frames that have a custom value for
the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented
and reassembled at L2 on a link-local basis. The non-preemptible frames
are called express traffic, they are transmitted using a normal SFD, and
they can preempt preemptible frames, therefore having lower latency,
which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo
frames around 9K). Preemption is not recursive, i.e. a P frame cannot
preempt another P frame. Preemption also does not depend upon priority,
or otherwise said, an E frame with prio 0 will still preempt a P frame
with prio 7.
In terms of implementation, the standards talk about the presence of an
express MAC (eMAC) which handles express traffic, and a preemptible MAC
(pMAC) which handles preemptible traffic, and these MACs are multiplexed
on the same MII by a MAC merge layer.
To support frame preemption, the definition of the SFD was generalized
to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an
Ethernet frame fragment, or a complete frame. Stations unaware of an SMD
value different from the standard SFD will treat P frames as error
frames. To prevent that from happening, a negotiation process is
defined.
On RX, packets are dispatched to the eMAC or pMAC after being filtered
by their SMD. On TX, the eMAC/pMAC classification decision is taken by
the 802.1Q spec, based on packet priority (each of the 8 user priority
values may have an admin-status of preemptible or express).
The MAC Merge layer and the Frame Preemption parameters have some degree
of independence in terms of how software stacks are supposed to deal
with them. The activation of the MM layer is supposed to be controlled
by an LLDP daemon (after it has been communicated that the link partner
also supports it), after which a (hardware-based or not) verification
handshake takes place, before actually enabling the feature. So the
process is intended to be relatively plug-and-play. Whereas FP settings
are supposed to be coordinated across a network using something
approximating NETCONF.
The support contained here is exclusively for the 802.3 (MAC Merge)
portions and not for the 802.1Q (Frame Preemption) parts. This API is
sufficient for an LLDP daemon to do its job. The FP adminStatus variable
from 802.1Q is outside the scope of an LLDP daemon.
I have taken a few creative licenses and augmented the Linux kernel UAPI
compared to the standard managed objects recommended by IEEE 802.3.
These are:
- ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive
Processing state diagram, a MAC Merge layer is always supposed to be
able to receive P frames. However, this implies keeping the pMAC
powered on, which will consume needless power in applications where FP
will never be used. If LLDP is used, the reception of an Additional
Ethernet Capabilities TLV from the link partner is sufficient
indication that the pMAC should be enabled. So my proposal is that in
Linux, we keep the pMAC turned off by default and that user space
turns it on when needed.
- ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called
aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in
the boolean netlink attributes offered, so this is also positive here.
Other than the meaning being reversed, they correspond to the same
thing.
- ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP
daemon to maximize the verifyTime variable (delay between SMD-V
transmissions), to maximize its chances that the LP replies. IEEE says
that the verifyTime can range between 1 and 128 ms, but the NXP ENETC
stupidly keeps this variable in a 7 bit register, so the maximum
supported value is 127 ms. I could have chosen to hardcode this in the
LLDP daemon to a lower value, but why not let the kernel expose its
supported range directly.
- ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called
aMACMergeAddFragSize, and expresses the "additional" fragment size
(on top of ETH_ZLEN), whereas this expresses the absolute value of the
fragment size.
- ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed
object mandated by the standard, but user space clearly needs to know
what is the minimum supported fragment size of our local receiver,
since LLDP must advertise a value no lower than that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kernel test robot reported htmldocs warning:
Documentation/trace/coresight/coresight-tpdm.rst:43: WARNING: Document may not end with a transition.
Since there is no more documentation left for TPDM, fix the warning by adding
dummy comment, thus creating the required text transition.
Link: https://lore.kernel.org/linux-doc/202301210955.zYxDrLgv-lkp@intel.com/
Fixes: 758d638667 ("Documentation: trace: Add documentation for TPDM and TPDA")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230121040015.28139-3-bagasdotme@gmail.com
kernel test robot reported htmldocs warnings:
Documentation/trace/coresight/coresight-tpda.rst:3: WARNING: Title overline too short.
Documentation/trace/coresight/coresight-tpdm.rst:3: WARNING: Title overline too short.
Extend title heading syntax (overline and underline) to match title text to
fix these warnings.
While at it, trim unneeded period in the title text.
Link: https://lore.kernel.org/linux-doc/202301210955.zYxDrLgv-lkp@intel.com/
Fixes: 758d638667 ("Documentation: trace: Add documentation for TPDM and TPDA")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230121040015.28139-2-bagasdotme@gmail.com
Add an 'efivars: ' printk prefix to make the log entries stand out more,
for example:
efivars: Registered efivars operations
While at it, change the sole remaining direct printk() call to pr_err().
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.
This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.
The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.
Cc: stable@vger.kernel.org
Fixes: 46c7655f0b ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <gergely.risko@gmail.com>
Tested-by: Gergely Risko <gergely.risko@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions are the
top-level aliases, chosen, firmware, memory and reserved-memory nodes,
which are expected to come first.
These rules apply recursively with some exceptions, such as pinmux nodes
or regulator nodes, which often follow more complicated ordering (often
by "importance").
While at it, change the name of some of the nodes to follow standard
naming conventions, which helps with the sorting order and reduces the
amount of warnings from the DT validation tools.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vladimir Oltean say:
====================
ethtool support for IEEE 802.3 MAC Merge layer
Change log
----------
v3->v4:
- add missing opening bracket in ocelot_port_mm_irq()
- moved cfg.verify_time range checking so that it actually takes place
for the updated rather than old value
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/
v2->v3:
- made get_mm return int instead of void
- deleted ETHTOOL_A_MM_SUPPORTED
- renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE
- introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE
- cleaned up documentation
- rebased on top of PLCA changes
- renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_*
v2 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/
v1->v2:
I've decided to focus just on the MAC Merge layer for now, which is why
I am able to submit this patch set as non-RFC.
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/
What is being introduced
------------------------
TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99
(interspersing of express traffic). This is controlled through ethtool
netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool
commands are posted here:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/
The MAC Merge layer has its own statistics counters
(ethtool --include-statistics --show-mm swp0) as well as two member
MACs, the statistics of which can be queried individually, through a new
ethtool netlink attribute, corresponding to:
$ ethtool -I --show-pause eno2 --src aggregate
$ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac
The core properties of the MAC Merge layer are described in great detail
in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format.
Devices for which the API is supported
--------------------------------------
I decided to start with the Ethernet switch on NXP LS1028A (Felix)
because of the smaller patch set. I also have support for the ENETC
controller pending.
I would like to get confirmation that the UAPI being proposed here will
not restrict any use cases known by other hardware vendors.
Why is support for preemptible traffic classes not here?
--------------------------------------------------------
There is legitimate concern whether the 802.1Q portion of the standard
(which traffic classes go to the eMAC and which to the pMAC) should be
modeled in Linux using tc or using another UAPI. I think that is
stalling the entire series, but should be discussed separately instead.
Removing FP adminStatus support makes me confident enough to submit this
patch set without an RFC tag (meaning: I wouldn't mind if it was merged
as is).
What is submitted here is sufficient for an LLDP daemon to do its job.
I've patched openlldp to advertise and configure frame preemption:
https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3
In case someone wants to try it out, here are some commands I've used.
# Configure the interfaces to receive and transmit LLDP Data Units
lldptool -L -i eno0 adminStatus=rxtx
lldptool -L -i swp0 adminStatus=rxtx
# Enable the transmission of certain TLVs on switch's interface
lldptool -T -i eno0 -V addEthCap enableTx=yes
lldptool -T -i swp0 -V addEthCap enableTx=yes
# Query LLDP statistics on switch's interface
lldptool -S -i swp0
# Query the received neighbor TLVs
lldptool -i swp0 -t -n -V addEthCap
Additional Ethernet Capabilities TLV
Preemption capability supported
Preemption capability enabled
Preemption capability active
Additional fragment size: 60 octets
So using this patch set, lldpad will be able to advertise and configure
frame preemption, but still, no data packet will be sent as preemptible
over the link, because there is no UAPI to control which traffic classes
are sent as preemptible and which as express.
Preemptable or preemptible?
---------------------------
IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible"
throughout. Because the definition of "preemptible" falls under 802.1Q's
jurisdiction and 802.3 just references it, I went with the 802.1Q naming
even where supporting an 802.3 feature. Also, checkpatch agrees with this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that the kernel-side data structures have been carried
over from the ioctl-based ethtool, we are now in the situation where we
have an ethnl_update_bool32() function, but the plain function that
operates on a boolean value kept in an actual u8 netlink attribute
doesn't exist.
With new ethtool features that are exposed solely over netlink, the
kernel data structures will use the "bool" type, so we will need this
kind of helper. Introduce it now; it's needed for things like
verify-disabled for the MAC merge configuration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171939327684154@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Now the rpcif_{en,dis}able_rpm() wrappers just take a pointer to a
device structure, there is no point in keeping them. Remove them, and
update the callers to call Runtime PM directly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/d87aa5d7e4a39b18f7e2e0649fee0a45b45d371f.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Most rpcif_*() API functions do not need access to any other fields in
the rpcif structure than the device pointer. Simplify dependencies by
passing the device pointer instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0460fe82ba348cedec7a9a75a8eff762c50e817b.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
rpcif_probe() already has a "dev" variable pointing to the right device
structure, so there is no need to take a detour through the platform
device.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/298009c43ad119703f564c0f1864743914b4beeb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
While the acquired resources are tied to the lifetime of the RPC-IF core
device (through the use of managed resource functions), the actual
resource acquisition is triggered from the HyperBus and SPI child
drivers. Due to this mismatch, unbinding and rebinding the child
drivers manually fails with -EBUSY:
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/unbind
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/bind
rpc-if ee200000.spi: can't request region for resource [mem 0xee200000-0xee2001ff]
rpc-if-hyperflash: probe of rpc-if-hyperflash failed with error -16
The same is true for rpc-if-spi.
Fix this by moving all resource acquisition to the core driver's probe
routine.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c1012ef1de799e08a70817ab7313794e2d8d7bfb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
- Most structure members describe private core driver state, which
should not be accessible by the child drivers,
- The structure's lifetime is controlled by the child drivers,
complicating use by the core driver.
Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field. This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The mx35lf1ge4ab_get_eccsr() function uses an SPI DMA operation to
read the eccsr, hence the buffer should not be on stack. Since commit
380583227c ("spi: spi-mem: Add extra sanity checks on the op param")
the kernel emmits a warning and blocks such operations.
Use the scratch buffer to get eccsr instead of trying to directly read
into a stack-allocated variable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/Y8i85zM0u4XdM46z@makrotopia.org
Describe the continuous read nand_chip fields to avoid the following
htmldocs warning:
include/linux/mtd/rawnand.h:1325: warning: Function parameter or member
'cont_read' not described in 'nand_chip'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 003fe4b954 ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230116094735.11483-1-miquel.raynal@bootlin.com
Doing so cannot work and should never happen.
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The ESRT can be parsed if EFI_PARAVIRT is enabled, even if EFI_MEMMAP is
not. Also allow the ESRT to be in reclaimable memory, as that is where
future Xen versions will put it.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As it turns out, Xen does not guarantee that EFI boot services data
regions in memory are preserved, which means that EFI configuration
tables pointing into such memory regions may be corrupted before the
dom0 OS has had a chance to inspect them.
This is causing problems for Qubes OS when it attempts to perform system
firmware updates, which requires that the contents of the EFI System
Resource Table are valid when the fwupd userspace program runs.
However, other configuration tables such as the memory attributes table
or the runtime properties table are equally affected, and so we need a
comprehensive workaround that works for any table type.
So when running under Xen, check the EFI memory descriptor covering the
start of the table, and disregard the table if it does not reside in
memory that is preserved by Xen.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is no vcc-fixed-regulator property for UFS nodes:
exynosautov9-sadk.dtb: ufs@17e00000: Unevaluated properties are not allowed ('vcc-fixed-regulator' was unexpected)
Link: https://lore.kernel.org/r/20230120130108.278851-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DT schema expect pin configuration nodes to have pin prefix or
suffix:
exynos4412-trats2.dtb: pinctrl@3860000: sleep-state: 'gpz-0', 'gpz-1', 'gpz-2', 'gpz-3', 'gpz-4', 'gpz-5', 'gpz-6'
do not match any of the regexes: '^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230120155404.323386-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The property is wr-active:
exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: b59b3afb94 ("ARM: dts: add fimd device support for exynos3250-rinato")
Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
simple-battery does not have supplies, but it is referenced by charger
instead:
exynos4412-p4note-n8010.dtb: battery-cell: 'power-supplies' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230120071151.116272-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
DT schema expects names of operating points tables to match certain
pattern:
exynos5422-odroidxu3-lite.dtb: opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$'
Link: https://lore.kernel.org/r/20230120064724.40621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.
Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.
Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().
Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:
1) drm_edid_connector_update() must be called before
drm_edid_connector_add_modes().
Display info and quirks are needed for parsing the modes, and we
don't want to call update_display_info() again to ensure the info is
available, like drm_add_edid_modes() does.
2) The same EDID is used for both updating the connector and adding the
probed modes.
Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
Separate the parsing of display info and modes from the HDMI VSDB. This
is prerequisite work for overall better separation of the two parsing
steps.
The info parsing is about figuring out whether the sink supports HDMI
infoframes. Since they were added in HDMI 1.4, assume the sink supports
HDMI infoframes if it has the HDMI_Video_present bit set (introduced in
HDMI 1.4). For details, see commit f1781e9bb2 ("drm/edid: Allow HDMI
infoframe without VIC or S3D").
The logic is not exactly the same, but since it was somewhat heuristic
to begin with, assume this is close enough.
v2:
- Simplify to only check HDMI_Video_present bit (Ville)
- Drop cea_db_raw_size() helper (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/238e15f7ab15a86f7fd1812271dcaec9bc6e1506.1674144945.git.jani.nikula@intel.com
Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through LDB_CTRL and LVDS_CTRL registers. i.MX93 LDB supports only
one LVDS channel(channel 0) and it's LVDS_CTRL register bit1 is used
as LVDS_EN instead of CH1_EN. Add i.MX93 LDB support in the existing
i.MX8mp LDB bridge driver by adding i.MX93 LDB compatible string and
device data(to reflect different register offsets and LVDS_CTRL register
bit1 definition).
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-3-victor.liu@nxp.com
Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through 'ldb' register and 'lvds' register. Also, the 'ldb' clock
is required. i.MX93 LDB supports only one LVDS channel(channel 0,
a.k.a, LVDS Channel-A in the device tree binding documentation), while
i.MX8mp LDB supports at most two. Add i.MX93 LDB device tree binding
in the existing i.MX8mp LDB device tree binding documentation.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-2-victor.liu@nxp.com
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220615221410.27459-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The core function always passes the data of request to the callback of
listener in any case. Additionally, the listener can maintain the lifetime
of data by reference count. In character device, no need to duplicate the
payload of request anymore to copy it to user space.
This commit extends the lifetime of data to obsolete duplication of
payload for request in character device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230120090344.296451-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the character device, the listener to address space should distinguish
whether the request is to IEC 61883-1 FCP region or not. The user space
application needs to access to the object of request in enough later by
read(2), while the core function releases the object of request in the FCP
case after completing the callback to handler.
The handler guarantees the access safe by some way. It's done by
duplication of the object after NULL check to the request, since core
function passes NULL in the FCP case. It's inconvenient since the object
of request includes some helpful information. It's better to add another
way to check whether the request is to FCP region or not.
Conveniently the file of transaction layer includes local implementation
for the purpose. This commit moves it to module local file and use it
instead of the NULL check, then the result of check is stored to
per-client data for the inbound transaction so that the result can be
referred by later to release the data.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230120090344.296451-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Developers have acknowledged that maintenance of lifetime for
fw_transaction structure is effective when handling asynchronous
transaction to IEC 61883-1 FCP region, since the core function allows
multiples listeners to the region. Some of them needs to access to the
payload of request in process context after the callback to listener,
while the core function releases the object for the structure just after
completing the callbacks to listeners.
One of the listeners is character device. Current implementation of the
character device duplicates the object for the payload of transaction,
while it's a cost in kernel memory consumption. The lifetime management
can reduce it.
The typical way to maintain the lifetime is reference count. This commit
uses kref structure as a first step for the purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230120090344.296451-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
