DSA switches can fall into one of two categories: switches where all ports
follow standard '(ethernet-)?port' properties, and switches that have
additional properties for the ports.
The scenario where DSA ports are all standardized can be handled by
switches with a reference to the new 'dsa.yaml#/$defs/ethernet-ports'.
The scenario where DSA ports require additional properties can reference
'$dsa.yaml#' directly. This will allow switches to reference these standard
definitions of the DSA switch, but add additional properties under the port
nodes.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> # realtek
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The children of the switch node don't have a unit address, and therefore
should not need the #address-cells or #size-cells entries. Fix the example
schemas accordingly.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The property use-bcm-hdr was documented as an entry under the ports node
for the bcm_sf2 DSA switch. This property is actually evaluated for each
port. Correct the documentation to match the actual behavior and properly
reference dsa-port.yaml for additional properties of the node.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAINTAINERS file has Andrew Lunn, Florian Fainelli, and Vladimir Oltean
listed as the maintainers for generic dsa bindings. Update dsa.yaml and
dsa-port.yaml accordingly.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Support loading A200 firmware generated from the iMX firmware header
files. The firmware lacks protection support, however it allows GPU to
function properly while using the firmware files with clear license
which allows redistribution.
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/516443/
Link: https://lore.kernel.org/r/20230101155753.779176-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----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=vcwq
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Another batch of fixes, dealing with fallouts from 6.1 reported by
users:
- tree-log fixes:
- fix directory logging due to race with concurrent index key
deletion
- fix missing error handling when logging directory items
- handle case of conflicting inodes being added to the log
- remove transaction aborts for not so serious errors
- fix qgroup accounting warning when rescan can be started at time
with temporarily disable accounting
- print more specific errors to system log when device scan ioctl
fails
- disable space overcommit for ZNS devices, causing heavy performance
drop"
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not abort transaction on failure to update log root
btrfs: do not abort transaction on failure to write log tree when syncing log
btrfs: add missing setup of log for full commit at add_conflicting_inode()
btrfs: fix directory logging due to race with concurrent index key deletion
btrfs: fix missing error handling when logging directory items
btrfs: zoned: enable metadata over-commit for non-ZNS setup
btrfs: qgroup: do not warn on record without old_roots populated
btrfs: add extra error messages to cover non-ENOMEM errors from device_add_list()
Zero-length arrays are deprecated[1] and are being replaced with
flexible array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.
Replace zero-length array with flexible-array member.
This results in no differences in binary output.
[1] https://github.com/KSPP/linux/issues/78
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gourav Samaiya <gsamaiya@nvidia.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103234835.never.378-kees@kernel.org
It appears this was the intention all along, but commit 3307d84024
("rtl8xxxu: Add initial code to parse rtl8192eu efuse") initialised
rtl8xxxu_debug with RTL8XXXU_DEBUG_EFUSE for no apparent reason, which
made it dump the efuse for all devices, even the tested ones.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d53fcf97-d6d2-3c75-14d5-97b58a5f3a6c@gmail.com
Make rtl8xxxu_print_chipinfo() print the ROM version. This is relevant
at least for the RTL8723AU and possibly relevant for the RTL8710BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/add46396-95af-1164-2033-7d4eb4d0b554@gmail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Use non-atomic rtw_iterate_stas() in rtw_ra_mask_info_update() because
the iterator function rtw_ra_mask_info_update_iter() needs to read and
write registers from within rtw_update_sta_info(). Using the non-atomic
iterator ensures that we can sleep during USB and SDIO register reads
and writes. This fixes "scheduling while atomic" or "Voluntary context
switch within RCU read-side critical section!" warnings as seen by SDIO
card users (but it also affects USB cards).
Fixes: 78d5bf925f ("wifi: rtw88: iterate over vif/sta list non-atomically")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-4-martin.blumenstingl@googlemail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Make rtw_watch_dog_work() use rtw_iterate_vifs() to prevent "scheduling
while atomic" or "Voluntary context switch within RCU read-side
critical section!" warnings when accessing the registers using an SDIO
card (which is where this issue has been spotted in the real world but
it also affects USB cards).
Fixes: 78d5bf925f ("wifi: rtw88: iterate over vif/sta list non-atomically")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-3-martin.blumenstingl@googlemail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Shrink the RCU critical section so it only cover the call to
ieee80211_find_sta() and finding the ic_vht_cap/vht_cap based on the
found station. This moves the chip's BFEE configuration outside the
rcu_read_lock section and thus prevent "scheduling while atomic" or
"Voluntary context switch within RCU read-side critical section!"
warnings when accessing the registers using an SDIO card (which is
where this issue has been spotted in the real world - but it also
affects USB cards).
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-2-martin.blumenstingl@googlemail.com
The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)
The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.
Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Or in the case of RTL8188EU, report the RSSI to the rate control code.
The rate control code for RTL8188EU is less likely to switch to a lower
rate when the RSSI is high. The firmware-based rate control in the other
chips probably works the same way.
This affects all the chips, but it was only tested with RTL8188EU,
RTL8188FU, and RTL8192EU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2aab4f3f-e914-4fe1-f29a-deac91774d05@gmail.com
Baoquan reported that after triggering a crash the subsequent crash-kernel
fails to boot about half of the time. It triggers a NULL pointer
dereference in the periodic tick code.
This happens because the legacy timer interrupt (IRQ0) is resent in
software which happens in soft interrupt (tasklet) context. In this context
get_irq_regs() returns NULL which leads to the NULL pointer dereference.
The reason for the resend is a spurious APIC interrupt on the IRQ0 vector
which is captured and leads to a resend when the legacy timer interrupt is
enabled. This is wrong because the legacy PIC interrupts are level
triggered and therefore should never be resent in software, but nothing
ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not
know about their trigger type.
Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.
Fixes: a4633adcdb ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/87mt6rjrra.ffs@tglx
The assignment of the else and else if branches is the same, so the else
if here is redundant, so we remove it.
./drivers/net/wireless/ralink/rt2x00/rt2800lib.c:8927:9-11: WARNING:
possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3631
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106022731.111243-1-jiapeng.chong@linux.alibaba.com
There is currently no return check for writing an authentication
type (HERMES_AUTH_SHARED_KEY or HERMES_AUTH_OPEN). It looks like
it was accidentally skipped.
This patch adds a return check similar to the other checks in
__orinoco_hw_setup_enc() for hermes_write_wordrec().
Detected using the static analysis tool - Svace.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221227133306.201356-1-aleksei.kodanev@bell-sw.com
The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.
To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.
The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit e542e66b7c
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)
To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.
Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.
This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215197
Fixes: e542e66b7c ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/03b099c1-c671-d252-36f4-57b70d721f9d@gmail.com
The last_pg is wrong, it is actually the first page of the last
scatterlist element. To get the last page of the last scatterlist element
we have to add prv->length. So it is checking mergability against the
wrong page, Further, a SG element is not guaranteed to end on a page
boundary, so we have to check the sub page location also for merge
eligibility.
Fix the above by checking physical contiguity based on PFNs, compute the
actual last page and then call pages_are_mergable().
Fixes: 1567b49d1a ("lib/scatterlist: add check when merging zone device pages")
Link: https://lore.kernel.org/r/20230111101054.188136-1-yishaih@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix W=1 kernel-doc warning:
kernel/printk/printk.c:
- Include function parameter in console_lock_spinning_disable_and_check()
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230116125635.374567-1-anuradha@debian.org
The revert of the removal of this driver happened after we fixed up
the split limits for NOWAIT issue, hence it got missed. Ensure that
we check for a NULL bio after splitting, in case it should be retried.
Marking this as fixing both commits, so that stable backport will do
this correctly.
Cc: stable@vger.kernel.org
Fixes: 9cea62b2cb ("block: don't allow splitting of a REQ_NOWAIT bio")
Fixes: 4b83e99ee7 ("Revert "pktcdvd: remove driver."")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several mutexes are taken while setting up console serial ports. In
particular, the tty_port->mutex and @console_mutex are taken:
serial_pnp_probe
serial8250_register_8250_port
uart_add_one_port (locks tty_port->mutex)
uart_configure_port
register_console (locks @console_mutex)
In order to synchronize kgdb's tty_find_polling_driver() with
register_console(), commit 6193bc9084 ("tty: serial: kgdboc:
synchronize tty_find_polling_driver() and register_console()") takes
the @console_mutex. However, this leads to the following call chain
(with locking):
platform_probe
kgdboc_probe
configure_kgdboc (locks @console_mutex)
tty_find_polling_driver
uart_poll_init (locks tty_port->mutex)
uart_set_options
This is clearly deadlock potential due to the reverse lock ordering.
Since uart_set_options() requires holding @console_mutex in order to
serialize early initialization of the serial-console lock, take the
@console_mutex in uart_poll_init() instead of configure_kgdboc().
Since configure_kgdboc() was using @console_mutex for safe traversal
of the console list, change it to use the SRCU iterator instead.
Add comments to uart_set_options() kerneldoc mentioning that it
requires holding @console_mutex (aka the console_list_lock).
Fixes: 6193bc9084 ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Export console_srcu_read_lock_is_held() to fix build kgdboc as a module.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230112161213.1434854-1-john.ogness@linutronix.de
Take into account possible error conditions of mt76_rx_token_consume
routine in mt7915_mmio_wed_init_rx_buf() and mt76_dma_add_buf()
Fixes: cd372b8c99 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf")
Fixes: 4f831d18d1 ("wifi: mt76: mt7915: enable WED RX support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 96f134dc19)
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113105848.34642-2-nbd@nbd.name
Do not increment queue head if mt76_dma_add_buf fails for Wireless
Ethernet Dispatcher rx queues.
Fixes: cd372b8c99 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit fe13dad899)
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113105848.34642-1-nbd@nbd.name
... to avoid the mess of conditional preprocessing as we are continually
adding fscache related mount options.
Reviewd-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230112065431.124926-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Since the EROFS share domain feature for fscache mode has been available
since Linux v6.1, let's add documentation for 'domain_id' mount option.
Cc: linux-doc@vger.kernel.org
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230112065431.124926-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The EFI runtime services run from a dedicated stack now, and so the
stack unwinder needs to be informed about this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Comparing current_work() against efi_rts_work.work is sufficient to
decide whether current is currently running EFI runtime services code at
any level in its call stack.
However, there are other potential users of the EFI runtime stack, such
as the ACPI subsystem, which may invoke efi_call_virt_pointer()
directly, and so any sync exceptions occurring in firmware during those
calls are currently misidentified.
So instead, let's check whether the stashed value of the thread stack
pointer points into current's thread stack. This can only be the case if
current was interrupted while running EFI runtime code. Note that this
implies that we should clear the stashed value after switching back, to
avoid false positives.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-7-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
