When parsing UVC descriptors to instantiate entities, the driver calls
usb_string() to retrieve the entity name from the device, and falls back
to a default name if the string can't be retrieved. This code pattern
occurs multiple times. Factor it out to a separate helper function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Elgato Cam Link 4k can be in a stalled state if the resolution of
the external source has changed while the firmware initializes.
Once in this state, the device is useless until it receives a
USB reset. It has even been observed that the stalled state will
continue even after unplugging the device.
lsusb -v
Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 9
idVendor 0x0fd9 Elgato Systems GmbH
idProduct 0x0066
bcdDevice 0.00
iManufacturer 1 Elgato
iProduct 2 Cam Link 4K
iSerial 4 0005AC52FE000
bNumConfigurations 1
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Make the code more resilient, by replacing the castings with proper
structure definitions and using offsetof() instead of open coding the
location of the data.
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes 'do not use assignment in if condition' errors issued by
scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c
Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes 'Missing a blank line after declarations' warning issued by
scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c
Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
On a Webcam from Quanta, we see the following error.
usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03
usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-5: Product: USB2.0 HD UVC WebCam
usb 3-5: Manufacturer: Quanta
usb 3-5: SerialNumber: 0x0001
...
uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2)
uvcvideo: Failed to initialize entity for entity 5
uvcvideo: Failed to register entities (-22).
The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a
string index of '7' associated with that entity. The attempt to read that
string from the camera fails with error -32 (-EPIPE). usb_string() returns
that error, but it is ignored. As result, the entity name is empty. This
later causes v4l2_device_register_subdev() to return -EINVAL, and no
entities are registered as result.
While this appears to be a firmware problem with the camera, the kernel
should still handle the situation gracefully. To do that, check the return
value from usb_string(). If it reports an error, assign the entity's
default name.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Examine the stream headers to figure out if the device has a button and
can be used as an input.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the source entity does not contain any pads, do not create a link.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(),
there's no need to manually set the descriptions in the driver. This
prepares for removal of the format descriptions from the uvc_fmts table.
Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV
formats. It also indicates whether the DV format uses 50Hz or 60Hz. This
information is parsed by the driver to construct a format name string
that is printed in a debug message, but serves no other purpose as V4L2
has a single V4L2_PIX_FMT_DV pixel format that covers all those cases.
As the information is available in the UVC descriptors, and thus
accessible to users with lsusb if they really care, don't log it in a
debug message and drop the format name string to simplify the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
"Daniel T. Lee" says:
====================
Currently, there are many programs under samples/bpf to test the
various functionality of BPF that have been developed for a long time.
However, the kernel (BPF) has changed a lot compared to the 2016 when
some of these test programs were first introduced.
Therefore, some of these programs use the deprecated function of BPF,
and some programs no longer work normally due to changes in the API.
To list some of the kernel changes that this patch set is focusing on,
- legacy BPF map declaration syntax support had been dropped [1]
- bpf_trace_printk() always append newline at the end [2]
- deprecated styled BPF section header (bpf_load style) [3]
- urandom_read tracepoint is removed (used for testing overhead) [4]
- ping sends packet with SOCK_DGRAM instead of SOCK_RAW [5]*
- use "vmlinux.h" instead of including individual headers
In addition to this, this patchset tries to modernize the existing
testing scripts a bit. And for network-related testing programs,
a separate header file was created and applied. (To use the
Endianness conversion function from xdp_sample and bunch of constants)
[1]: https://github.com/libbpf/libbpf/issues/282
[2]: commit ac5a72ea5c ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
[3]: commit ceb5dea565 ("samples: bpf: Remove bpf_load loader completely")
[4]: commit 14c174633f ("random: remove unused tracepoints")
[5]: https://lwn.net/Articles/422330/
*: This is quite old, but I'm not sure why the code was initially
developed to filter only SOCK_RAW.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit changes the _kern suffix to .bpf with the BPF test programs.
With this modification, test programs will inherit the benefit of the
new CLANG-BPF compile target.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-11-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit applies vmlinux.h to BPF functionality testing program.
Macros that were not defined despite migration to "vmlinux.h" were
defined separately in individual files.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-10-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit applies "net_shared.h" to BPF programs to remove existing
network related header dependencies. Also, this commit removes
unnecessary headers before applying "vmlinux.h" to the BPF programs.
Mostly, endianness conversion function has been applied to the source.
In addition, several macros have been defined to fulfill the INET,
TC-related constants.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-9-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, many programs under sample/bpf often include individual
macros by directly including the header under "linux/" rather than
using the "vmlinux.h" header.
However, there are some problems with migrating to "vmlinux.h" because
there is no definition for utility functions such as endianness
conversion (ntohs/htons). Fortunately, the xdp_sample program already
has a function that can be replaced to solve this problem.
Therefore, this commit attempts to separate these functions into a file
called net_shared.h to make them universally available. Additionally,
this file includes network-related macros that are not defined in
"vmlinux.h". (inspired by 'selftests' bpf_tracing_net.h)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-8-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With libbpf 1.0 release, support for legacy BPF map declaration syntax
had been dropped. If you run a program using legacy BPF in the latest
libbpf, the following error will be output.
libbpf: map 'lwt_len_hist_map' (legacy): legacy map definitions are deprecated, use BTF-defined maps instead
libbpf: Use of BPF_ANNOTATE_KV_PAIR is deprecated, use BTF-defined maps in .maps section instead
This commit replaces legacy map with the BTF-defined map.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-7-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_overhead bpf program is designed to compare performance
between tracepoint and kprobe. Initially it used task_rename and
urandom_read tracepoint.
However, commit 14c174633f ("random: remove unused tracepoints")
removed urandom_read tracepoint, and for this reason the test_overhead
got broken.
This commit introduces new microbenchmark using fib_table_lookup.
This microbenchmark sends UDP packets to localhost in order to invoke
fib_table_lookup.
In a nutshell:
fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
addr.sin_addr.s_addr = inet_addr(DUMMY_IP);
addr.sin_port = htons(DUMMY_PORT);
for() {
sendto(fd, buf, strlen(buf), 0,
(struct sockaddr *)&addr, sizeof(addr));
}
on 4 cpus in parallel:
lookup per sec
base (no tracepoints, no kprobes) 381k
with kprobe at fib_table_lookup() 325k
with tracepoint at fib:fib_table_lookup 330k
with raw_tracepoint at fib:fib_table_lookup 365k
Fixes: 14c174633f ("random: remove unused tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-6-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, executing test_cgrp2_sock2 fails due to wrong section
header. This 'cgroup/sock1' style section is previously used at
'samples/bpf_load' (deprecated) BPF loader. Because this style isn't
supported in libbpf, this commit fixes this problem by correcting the
section header.
$ sudo ./test_cgrp2_sock2.sh
libbpf: prog 'bpf_prog1': missing BPF prog type, check ELF section name 'cgroup/sock1'
libbpf: prog 'bpf_prog1': failed to load: -22
libbpf: failed to load object './sock_flags_kern.o'
ERROR: loading BPF object file failed
In addition, this BPF program filters ping packets by comparing whether
the socket type uses SOCK_RAW. However, after the ICMP socket[1] was
developed, ping sends ICMP packets using SOCK_DGRAM. Therefore, in this
commit, the packet filtering is changed to use SOCK_DGRAM instead of
SOCK_RAW.
$ strace --trace socket ping -6 -c1 -w1 ::1
socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = 3
[1]: https://lwn.net/Articles/422330/
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-5-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_lwt_bpf is a script that tests the functionality of BPF through
the output of the ftrace with bpf_trace_printk. Currently, this program
is not operating normally for several reasons.
First of all, this test script can't parse the ftrace results properly.
GNU sed tries to be as greedy as possible when attempting pattern
matching. Due to this, cutting metadata (such as timestamp) from the
log entry of ftrace doesn't work properly, and also desired log isn't
extracted properly. To make sed stripping clearer, 'nocontext-info'
option with the ftrace has been used to remove metadata from the log.
Also, instead of using unclear pattern matching, this commit specifies
an explicit parse pattern.
Also, unlike before when this test was introduced, the way
bpf_trace_printk behaves has changed[1]. The previous bpf_trace_printk
had to always have '\n' in order to print newline, but now that the
bpf_trace_printk call includes newline by default, so '\n' is no longer
needed.
Lastly with the lwt ENCAP_BPF out, the context information with the
sk_buff protocol is preserved. Therefore, this commit changes the
previous test result from 'protocol 0' to 'protocol 8', which means
ETH_P_IP.
[1]: commit ac5a72ea5c ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-4-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, some test scripts are experiencing minor errors related to
executing tests.
$ sudo ./test_cgrp2_sock.sh
./test_cgrp2_sock.sh: 22: test_cgrp2_sock: not found
This problem occurs because the path to the execution target is not
properly specified. Therefore, this commit solves this problem by
specifying a relative path to its executables. This commit also makes
a concise refactoring of hard-coded BPF program names.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, a few of BPF tests use ipv6 functionality. The problem here
is that if ipv6 is disabled, these tests will fail, and even if the
test fails, it will not tell you why it failed.
$ sudo ./test_cgrp2_sock2.sh
RTNETLINK answers: Permission denied
In order to fix this, this commit ensures ipv6 is enabled prior to
running tests.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ziyang Xuan says:
====================
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
And add ipip6 and ip6ip decap testcases to verify that
bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip
tunnel packets.
$./test_tc_tunnel.sh
ipip
encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100
test basic connectivity
0
test bpf encap without decap (expect failure)
Ncat: TIMEOUT.
1
test bpf encap with tunnel device decap
0
test bpf encap with bpf decap
0
OK
ipip6
encap 192.168.1.1 to 192.168.1.2, type ipip6, mac none len 100
test basic connectivity
0
test bpf encap without decap (expect failure)
Ncat: TIMEOUT.
1
test bpf encap with tunnel device decap
0
test bpf encap with bpf decap
0
OK
ip6ip6
encap fd::1 to fd::2, type ip6tnl, mac none len 100
test basic connectivity
0
test bpf encap without decap (expect failure)
Ncat: TIMEOUT.
1
test bpf encap with tunnel device decap
0
test bpf encap with bpf decap
0
OK
sit
encap fd::1 to fd::2, type sit, mac none len 100
test basic connectivity
0
test bpf encap without decap (expect failure)
Ncat: TIMEOUT.
1
test bpf encap with tunnel device decap
0
test bpf encap with bpf decap
0
OK
...
OK. All tests passed
v3:
- Fix compilation failure of selftests/bpf.
- Combine two new branches in bpf_skb_adjust_room().
- Simplify description for new flags BPF_F_ADJ_ROOM_DECAP_L3_IP*.
v2:
- Use decap flags to indicate the new IP header.
Do not rely on skb->encapsulation.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the
new IP header version after decapsulating the outer IP header.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add pinctrl macros for J784s4 SoC. These macro definitions are
similar to that of J721s2, but adding new definitions to avoid
any naming confusions in the soc dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-3-a-nandan@ti.com
AM62 SoC has two instances of USB and they are brought on to the board
in the following way,
-> USB0 instance
- This is brought out to a USB TypeC connector on board through TPS6598 PD
controller. The PD controller should decide the role based on CC pin in
the connector. Unfortunately the irq line for the TPS isn't hooked up
which is a mode not yet support by the driver (some patches were
submitted earlier this year[0]). So for now the PD controller is left
out and peripheral mode chosen.
-> USB1 instance
- This is brought out to a USB TypeA connector on board.
Therefore, add the required device tree support for the above in the board
dts file.
0: https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112162847.973869-4-sjoerd@collabora.com
AM62 SoC has two instances of USB on it. Therefore, add support for the
same.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112162847.973869-3-sjoerd@collabora.com
UHS Class U1 sd-card are not getting detected due to incorrect
OTAP/ITAP delay select values in linux. Update OTAP and ITAP
delay select values for various speed modes. For sdhci0, update
OTAP delay values for ddr52 & HS200 and add ITAP delay for legacy
& mmc-hs. For sdhci1 & sdhci2, update OTAP & ITAP delay select
recommended as in RIOT for various speed modes.
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
[cherry-pick from vendor BSP]
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112162847.973869-2-sjoerd@collabora.com
- Fixes for two resctrl races when moving a task or creating a new monitoring
group
- Fix SEV-SNP guests running under HyperV where MTRRs are disabled to not return
a UC- type mapping type on memremap() and thus cause a serious slowdown
- Fix insn mnemonics in bioscall.S now that binutils is starting to fix
confusing insn suffixes
-----BEGIN PGP SIGNATURE-----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=W2zR
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure the poking PGD is pinned for Xen PV as it requires it this
way
- Fixes for two resctrl races when moving a task or creating a new
monitoring group
- Fix SEV-SNP guests running under HyperV where MTRRs are disabled to
not return a UC- type mapping type on memremap() and thus cause a
serious slowdown
- Fix insn mnemonics in bioscall.S now that binutils is starting to fix
confusing insn suffixes
* tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: fix poking_init() for Xen PV guests
x86/resctrl: Fix event counts regression in reused RMIDs
x86/resctrl: Fix task CLOSID/RMID update race
x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
- Fix a memory leak in highbank's probing function
-----BEGIN PGP SIGNATURE-----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=TiMH
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix the EDAC device's confusion in the polling setting units
- Fix a memory leak in highbank's probing function
* tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/highbank: Fix memory leak in highbank_mc_probe()
EDAC/device: Fix period calculation in edac_device_reset_delay_period()
- Fix a build failure with some versions of ld that have an odd version string.
- Fix incorrect use of mutex in the IMC PMU driver.
Thanks to: Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, Yang Yingliang.
-----BEGIN PGP SIGNATURE-----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=BaFo
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a build failure with some versions of ld that have an odd version
string
- Fix incorrect use of mutex in the IMC PMU driver
Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and
Yang Yingliang.
* tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/hash: Make stress_hpt_timer_fn() static
powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
powerpc/boot: Fix incorrect version calculation issue in ld_version
Print syndromes in case of fatal QP events. This is helpful for upper
level debugging, as there maybe no CQEs.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/edc794f622a33e4ee12d7f5d218d1a59aa7c6af5.1672821186.git.leonro@nvidia.com
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move the call of qp event handler from atomic to workqueue context,
so that the handler is able to block. This is needed by following
patches.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/0cd17b8331e445f03942f4bb28d447f24ac5669d.1672821186.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduces CQE error syndrome bits which are inside qp_context_extension
and are used to report the reason the QP was moved to error state.
Useful for cases in which a CQE isn't generated, such as remote write
rkey violation.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/f8359315f8130f6d2abe4b94409ac7802f54bce3.1672821186.git.leonro@nvidia.com
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Zero-length arrays are deprecated[1]. Replace all remaining
0-length arrays with flexible arrays. Detected with GCC 13, using
-fstrict-flex-arrays=3:
In function 'build_rdma_write',
inlined from 'c4iw_post_send' at ../drivers/infiniband/hw/cxgb4/qp.c:1173:10:
../drivers/infiniband/hw/cxgb4/qp.c:597:38: warning: array subscript 0 is outside array bounds of 'struct fw_ri_immd[0]' [-Warray-bounds=]
597 | wqe->write.u.immd_src[0].r2 = 0;
| ~~~~~~~~~~~~~~~~~~~~~^~~
../drivers/infiniband/hw/cxgb4/t4fw_ri_api.h: In function 'c4iw_post_send':
../drivers/infiniband/hw/cxgb4/t4fw_ri_api.h:567:35: note: while referencing 'immd_src'
567 | struct fw_ri_immd immd_src[0];
| ^~~~~~~~
Additionally drop the unused C99_NOT_SUPPORTED ifndef lines.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230105223225.never.252-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In presence of a lot of small weight tasks like sched_idle tasks, normal
or high weight tasks can see their ideal runtime (sched_slice) to increase
to hundreds ms whereas it normally stays below sysctl_sched_latency.
2 normal tasks running on a CPU will have a max sched_slice of 12ms
(half of the sched_period). This means that they will make progress
every sysctl_sched_latency period.
If we now add 1000 idle tasks on the CPU, the sched_period becomes
3006 ms and the ideal runtime of the normal tasks becomes 609 ms.
It will even become 1500ms if the idle tasks belongs to an idle cgroup.
This means that the scheduler will look for picking another waiting task
after 609ms running time (1500ms respectively). The idle tasks change
significantly the way the 2 normal tasks interleave their running time
slot whereas they should have a small impact.
Such long sched_slice can delay significantly the release of resources
as the tasks can wait hundreds of ms before the next running slot just
because of idle tasks queued on the rq.
Cap the ideal_runtime to sysctl_sched_latency to make sure that tasks will
regularly make progress and will not be significantly impacted by
idle/background tasks queued on the rq.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20230113133613.257342-1-vincent.guittot@linaro.org
Functions used with __setup() return 1 when the argument has been
successfully parsed.
Reverse the returned value so that 1 is returned when kstrtobool() is
successful (i.e. returns 0).
My understanding of these __setup() functions is that returning 1 or 0
does not change much anyway - so this is more of a cleanup than a
functional fix.
I spot it and found it spurious while looking at something else.
Even if the output is not perfect, you'll get the idea with:
$ git grep -B2 -A10 retu.*kstrtobool | grep __setup -B10
Fixes: 3aac3ebea0 ("x86/signal: Implement sigaltstack size validation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/73882d43ebe420c9d8fb82d0560021722b243000.1673717552.git.christophe.jaillet@wanadoo.fr
Return value should be zero for success. This was forgotten for timestamp
feature. Verified on RealSense cameras.
Fixes: 4648cbd8fb ("iio: hid-sensor-gyro-3d: Add timestamp channel")
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
