Require only properties declared in given schema, which makes the code a
bit more readable and easy to follow.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514229/
Link: https://lore.kernel.org/r/20221207012231.112059-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The rcu_boost_kthread_setaffinity() function is invoked at
rcutree_online_cpu() and rcutree_offline_cpu() time, early in the online
timeline and late in the offline timeline, respectively. It is also
invoked from rcutree_dead_cpu(), however, in the absence of userspace
manipulations (for which userspace must take responsibility), this call
is redundant with that from rcutree_offline_cpu(). This redundancy can
be demonstrated by printing out the relevant cpumasks
This commit therefore removes the call to rcu_boost_kthread_setaffinity()
from rcutree_dead_cpu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
i.MX8MQ CCM is at address 0x30380000, so correct it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20221223030540.62018-1-peng.fan@oss.nxp.com
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Fixes: 5de691bffe ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
pci_get_domain_bus_and_slot() takes reference, the caller should release
the reference by calling pci_dev_put() after use. Call pci_dev_put() in
the error path to fix this.
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221229072534.1381432-1-linmq006@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Meteor Lake mobile support to pmc core driver. Meteor Lake mobile
parts reuse all the Meteor Lake PCH IPs.
Cc: David E Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20221228230553.2497183-1-gayatri.kammela@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
What we called IPC427G should be renamed to BX-39A to be more in line
with the actual product name.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit fb541ca4c3 ("md: remove lock_bdev / unlock_bdev") removes
wrappers for blkdev_get/blkdev_put. However, the uninitialized local
static variable of pointer type 'claim_rdev' in md_import_device()
is NULL, which leads to the following warning call trace:
WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150
CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69
..
RIP: 0010:bd_prepare_to_claim+0x131/0x150
..
Call Trace:
<TASK>
? _raw_spin_unlock+0x15/0x30
? iput+0x6a/0x220
blkdev_get_by_dev.part.0+0x4b/0x300
md_import_device+0x126/0x1d0
new_dev_store+0x184/0x240
md_attr_store+0x80/0xf0
kernfs_fop_write_iter+0x128/0x1c0
vfs_write+0x2be/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
It turns out the md device cannot be used:
md: could not open device unknown-block(259,0).
md: md127 stopped.
Fix the issue by declaring the local static variable of struct type
and passing the pointer of the variable to blkdev_get_by_dev().
Fixes: fb541ca4c3 ("md: remove lock_bdev / unlock_bdev")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
When building a PXA kernel without legacy board file support,
the AC97 code is not built, so none of the AC97 drivers
can be used.
Add a Kconfig prompt to let users turn it on, and have it
enabled by default.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230105134622.254560-15-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If we do not have a fan it does not make sense to load curves for it.
This removes the following warnings from the kernel log:
asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
Fixes: a2bdf10ce9 ("platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-3-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ASUS VivoBook has a fan device described in its ACPI tables but does
not actually contain any physical fan.
Use the quirk to inhibit fan handling.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some laptops have a fan device listed in their ACPI tables but do not
actually contain a fan.
Introduce a quirk that can be used to override the fan detection logic.
This was observed with a ASUS VivoBook E410MA running firmware
E410MAB.304.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-1-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As the ECRC configuration bits are part of AER registers, configure ECRC
only if AER is natively owned by the kernel.
Link: https://lore.kernel.org/r/20230112072111.20063-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This keycode is emitted on a Asus VivoBook E410MAB with firmware
E410MAB.304.
The physical key has a strikken-through camera printed on it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221216-asus-key-v1-1-45da124119a3@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 99d9ccd973 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
So far we were assigning some crude "type" (SoC name, really) to each
Allwinner USB PHY model, then guarding certain quirks based on this.
This does not only look weird, but gets more or more cumbersome to
maintain.
Remove the bogus type names altogether, instead introduce flags for each
quirk, and explicitly check for them.
This improves readability, and simplifies future extensions.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-4-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The F1C100s SoC has one USB OTG port connected to a MUSB controller.
Add support for its USB PHY.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-3-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allwinner F1C100s has the most simple USB PHY among all Allwinner SoCs,
because it has only one OTG USB controller, no host-only OHCI/EHCI
controllers.
Add a binding document for it. Following the current situation of one
YAML file per SoC, this one is based on
allwinner,sun8i-v3s-usb-phy.yaml, but with OHCI/EHCI-related bits
removed. (The same driver in Linux, phy-sun4i-usb, covers all these
binding files now.)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-2-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
Cc: stable@vger.kernel.org
Fixes: eb0089d629 ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that a regulators child is accepted by the controller binding, the
debugfs show routine must be explicitly limited to mmio-sram children.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221208084127.17443-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.
Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-6-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.
Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove QMP PHY type-specific headers inclusion from the common header
and move them to the specific PHY drivers to cleanup the namespaces used
by different drivers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-14-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop qcm2290_usb3phy_regs_layout, it is a duplicate of
qmp_v3_usb3phy_regs_layout. Introduce qmp_v5_usb3phy_regs_layout to be
used for sm8350 and sc8280xp.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-13-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.
Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-12-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
