Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
When clocksource_watchdog() detects excessive clocksource skew compared
to the watchdog clocksource, it marks the clocksource under test as
unstable and prints several lines worth of message. But that message
is unclear to anyone unfamiliar with the code:
clocksource: timekeeping watchdog on CPU2: Marking clocksource 'wdtest-ktime' as unstable because the skew is too large:
clocksource: 'kvm-clock' wd_nsec: 400744390 wd_now: 612625c2c wd_last: 5fa7f7c66 mask: ffffffffffffffff
clocksource: 'wdtest-ktime' cs_nsec: 600744034 cs_now: 173081397a292d4f cs_last: 17308139565a8ced mask: ffffffffffffffff
clocksource: 'kvm-clock' (not 'wdtest-ktime') is current clocksource.
Therefore, add the following line near the end of that message:
Clocksource 'wdtest-ktime' skewed 199999644 ns (199 ms) over watchdog 'kvm-clock' interval of 400744390 ns (400 ms)
This new line clearly indicates the amount of skew between the two
clocksources, along with the duration of the time interval over which
the skew occurred, both in nanoseconds and milliseconds.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):
---+-+-----------+-----------+--
100 0 rs1[4:0]!=0 00000 10 : c.jr
100 1 rs1[4:0]!=0 00000 10 : c.jalr
100 0 rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1 rd[4:0]!=0 rs2[4:0]!=0 10 : c.add
The following logic is used to decode c.jr and c.jalr:
insn & 0xf007 == 0x8002 => instruction is an c.jr
insn & 0xf007 == 0x9002 => instruction is an c.jalr
When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.
Correct the decoding by changing the mask from 0xf007 to 0xf07f.
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230102160748.1307289-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Time stamps are added to the output in kernels built with
CONFIG_PRINTK_TIME=y, which causes misaligned output. Therefore,
replace pr_cont() with pr_err(), which fixes alignment and gets
rid of a couple of despised pr_cont() calls.
Before:
[ 37.567343] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 37.567839] rcu: 0-....: (1500 ticks this GP) idle=***
[ 37.568270] (t=1501 jiffies g=4717 q=28 ncpus=4)
[ 37.568668] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #8
After:
[ 36.762074] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 36.762543] rcu: 0-....: (1499 ticks this GP) idle=***
[ 36.763003] rcu: (t=1500 jiffies g=5097 q=27 ncpus=4)
[ 36.763522] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #9
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because RCU CPU stall warnings are driven from the scheduling-clock
interrupt handler, a workload consisting of a very large number of
short-duration hardware interrupts can result in misleading stall-warning
messages. On systems supporting only a single level of interrupts,
that is, where interrupts handlers cannot be interrupted, this can
produce misleading diagnostics. The stack traces will show the
innocent-bystander interrupted task, not the interrupts that are
at the very least exacerbating the stall.
This situation can be improved by displaying the number of interrupts
and the CPU time that they have consumed. Diagnosing other types
of stalls can be eased by also providing the count of softirqs and
the CPU time that they consumed as well as the number of context
switches and the task-level CPU time consumed.
Consider the following output given this change:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1250 ticks this GP) <omitted>
rcu: hardirqs softirqs csw/system
rcu: number: 624 45 0
rcu: cputime: 69 1 2425 ==> 2500(ms)
This output shows that the number of hard and soft interrupts is small,
there are no context switches, and the system takes up a lot of time. This
indicates that the current task is looping with preemption disabled.
The impact on system performance is negligible because snapshot is
recorded only once for all continuous RCU stalls.
This added debugging information is suppressed by default and can be
enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or
by booting with rcupdate.rcu_cpu_stall_cputime=1.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a function nr_context_switches_cpu() that returns number of context
switches since boot on the specified CPU. This information will be used
to diagnose RCU CPU stalls.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a kstat_cpu_softirqs_sum() function that is similar to
kstat_cpu_irqs_sum(), but which counts software interrupts since boot
on the specified CPU.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Josh Don <joshdon@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.
They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called. However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks. If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().
This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations. Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The sparse __acquires() and __releases() annotations provide very
little value. The argument is ignored, so sparse cannot tell the
differences between acquiring one lock and releasing another on the one
hand and acquiring and releasing a given lock on the other. In addition,
lockdep annotations provide much more precision, for but one example,
actually knowing which lock is held.
This commit therefore removes the __acquires() and __releases()
annotations from rcutorture.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rt boosting in locktorture has a factor variable s currently large enough
that boosting only happens once every minute or so. Add a tunable to reduce the
factor so that boosting happens more often, to test paths and arrive at failure
modes earlier. With this change, I can set the factor to like 50 and have the
boosting happens every 10 seconds or so.
Tested with boot parameters:
locktorture.torture_type=mutex_lock
locktorture.onoff_interval=1
locktorture.nwriters_stress=8
locktorture.stutter=0
locktorture.rt_boost=1
locktorture.rt_boost_factor=50
locktorture.nlocks=3
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently RT boosting is only done for rtmutex_lock, however with proxy
execution, we also have the mutex_lock participating in priorities. To
exercise the testing better, add RT boosting to other lock testing types
as well, using a new knob (rt_boost).
Tested with boot parameters:
locktorture.torture_type=mutex_lock
locktorture.onoff_interval=1
locktorture.nwriters_stress=8
locktorture.stutter=0
locktorture.rt_boost=1
locktorture.rt_boost_factor=1
locktorture.nlocks=3
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds three read-side-only tests of three use cases featuring
SLAB_TYPESAFE_BY_RCU: One using per-object reference counting, one using
per-object locking, and one using per-object sequence locking.
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Since the commits starting with c37495d625 ("slab: add __alloc_size
attributes for better bounds checking"), the compilers have runtime
allocation size hints available in some places. This was immediately
available to CONFIG_UBSAN_BOUNDS, but CONFIG_FORTIFY_SOURCE needed
updating to explicitly make use of the hints via the associated
__builtin_dynamic_object_size() helper. Detect and use the builtin when
it is available, increasing the accuracy of the mitigation. When runtime
sizes are not available, __builtin_dynamic_object_size() falls back to
__builtin_object_size(), leaving the existing bounds checking unchanged.
Additionally update the VMALLOC_LINEAR_OVERFLOW LKDTM test to make the
hint invisible, otherwise the architectural defense is not exercised
(the buffer overflow is detected in the memset() rather than when it
crosses the edge of the allocation).
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: llvm@lists.linux.dev
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> # include/linux/compiler_attributes.h
Signed-off-by: Kees Cook <keescook@chromium.org>
0-length arrays are deprecated, and cause problems with bounds checking.
Replace with a flexible array:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from arch/x86/include/asm/paravirt.h:17,
from arch/x86/include/asm/cpuid.h:62,
from arch/x86/include/asm/processor.h:19,
from arch/x86/include/asm/cpufeature.h:5,
from arch/x86/include/asm/thread_info.h:53,
from include/linux/thread_info.h:60,
from arch/x86/include/asm/preempt.h:9,
from include/linux/preempt.h:78,
from include/linux/percpu.h:6,
from include/linux/prandom.h:13,
from include/linux/random.h:153,
from include/linux/net.h:18,
from net/rxrpc/output.c:10:
In function 'fortify_memcpy_chk',
inlined from 'rxrpc_fill_out_ack' at net/rxrpc/output.c:158:2:
include/linux/fortify-string.h:520:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
520 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/linux-next/20230105132535.0d65378f@canb.auug.org.au/
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-afs@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
- fix a reference leak in gpio-sifive
- fix a potential use of an uninitialized variable in core gpiolib
- fix a potential use of an uninitialized variable in gpio-pca953x
- make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd and
gpio-sprd
-----BEGIN PGP SIGNATURE-----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=vy5/
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A reference leak fix, two fixes for using uninitialized variables and
more drivers converted to using immutable irqchips:
- fix a reference leak in gpio-sifive
- fix a potential use of an uninitialized variable in core gpiolib
- fix a potential use of an uninitialized variable in gpio-pca953x
- make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd
and gpio-sprd"
* tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sifive: Fix refcount leak in sifive_gpio_probe
gpio: sprd: Make the irqchip immutable
gpio: pmic-eic-sprd: Make the irqchip immutable
gpio: eic-sprd: Make the irqchip immutable
gpio: pca953x: avoid to use uninitialized value pinctrl
gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
When sg_alloc_append_table_from_pages() calls to pages_are_mergeable() in
its 'sgt_append->prv' flow to check whether it can merge contiguous pages
into the last SG, it passes the page arguments in the wrong order.
The first parameter should be the next candidate page to be merged to
the last page and not the opposite.
The current code leads to a corrupted SG which resulted in OOPs and
unexpected errors when non-contiguous pages are merged wrongly.
Fix to pass the page parameters in the right order.
Fixes: 1567b49d1a ("lib/scatterlist: add check when merging zone device pages")
Link: https://lore.kernel.org/r/20230105112339.107969-1-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drm_sched_job_add_dependency() consumes the references of the gang
members. Only triggered by mesh shaders.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1728baa7e4 ("drm/amdgpu: use scheduler dependencies for CS")
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105111703.52695-1-christian.koenig@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Documentation/RCU/stallwarn.rst:
401: WARNING: Literal block expected; none found.
428: WARNING: Literal block expected; none found.
445: WARNING: Literal block expected; none found.
459: WARNING: Literal block expected; none found.
468: WARNING: Literal block expected; none found.
The literal block needs to be indented, so this commit adds two spaces
to each line.
In addition, ':', which is used as a boundary in the literal block, is
replaced by '|'.
Link: https://lore.kernel.org/linux-next/20221123163255.48653674@canb.auug.org.au/
Fixes: 3d2788ba4573 ("doc: Document CONFIG_RCU_CPU_STALL_CPUTIME=y stall information")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Line numbers in code snippets in rcubarrier.rst have beed left adjusted
since commit 4af498306f ("doc: Convert to rcubarrier.txt to ReST").
This might have been because right adjusting them had confused Sphinx.
The rules around a literal block in reST are:
- Need a blank line above it.
- A line with the same indent level as the line above it is regarded
as the end of it.
Those line numbers can be right adjusted by keeping indents at two-
digit numbers. While at it, add some spaces between the column of line
numbers and the code area for better readability.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit documents the additional RCU CPU stall warning output
produced by kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y or booted
with rcupdate.rcu_cpu_stall_cputime=1.
[ paulmck: Apply wordsmithing. ]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates UP.rst to reflect changes over the past few years,
including the advent of userspace RCU libraries for constrained systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- Fix Matrox G200eW initialization failure
- Fix build failure of offb driver when built as module
- Optimize stack usage in omapfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY7asbAAKCRD3ErUQojoP
X3bKAQDARxChoZ3eBfkKd3MJXMrYorE/T4zX2stBIdU6p/WgPQEA4W1xx3B6yzIK
XR+lRlhwUIUkmgzMG9JEyZQEd9nzSA8=
=s+E8
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix Matrox G200eW initialization failure
- Fix build failure of offb driver when built as module
- Optimize stack usage in omapfb
* tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: avoid stack overflow warning
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
fbdev: atyfb: use strscpy() to instead of strncpy()
fbdev: omapfb: use strscpy() to instead of strncpy()
fbdev: make offb driver tristate
There are new cases where we want to block i915 probe, such
as when experimenting or developing the new Xe driver.
But also, with the new hybrid cards, users or developers might
want to use i915 only on integrated and fully block the probe
of the i915 for the discrete. Or vice versa.
There are even older development and validation reasons,
like when you use some distro where the modprobe.blacklist is
not present.
But in any case, let's introduce a more granular control, but without
introducing yet another parameter, but using the existent force_probe
one.
Just by adding a ! in the begin of the id in the force_probe, like
in this case where we would block the probe for Alder Lake:
$ insmod i915.ko force_probe='!46a6'
v2: Take care of '*' and '!*' cases as pointed out by
Gustavo and Jani.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103194701.1492984-1-rodrigo.vivi@intel.com
Setup instructions for memory resource controller UI uses a mix of
section headings and normal paragraphs, whereas numbered lists are
better fit for this purpose.
While at it, also slightly reword the instructions and add reference to
"Why are cgroups needed?" in the main cgroups documentation.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The documentation contains references to other sections in the doc
(internal). Add cross-references for them so that these can be accessed
without having to manually search for them.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Subsections text of swap extension section is marked up as bold text,
whereas making them proper subsection is more appropriate.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The stat file section contains three tables, where the leading texts for
them are subsection heading. Organize them in the bullet list, while
demoting headings into normal text.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The caption for hierarchy of accounting figure is in the code block,
which is quite odd. Move the caption into :caption: option of
code-block:: directive instead.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The documentation contains external references, which some of them are
marked as footnotes. Fix the syntax for them to be properly rendered as
such.
Non-footnote references aren't affected since the text for these is
aligned the same to the footnotes.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The locking order schema is a figure (like diagram), which should have
been formatted with literal code block for consistency with other
figures.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Wrap two other admonitions in appropriate blocks in order for readers to
pay more attention to block contents:
* hint:: for editor's note
* warning:: for move charges deprecation
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Admonition constructs on the documentation use definition lists, which
isn't fit for the purpose. Replace them with appropriate blocks:
* Use caution:: for outdated document notice
* hint:: for memo
* note:: for other constructs
* warning:: for memory reclaim
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Then we are able to set a new ppt limit via the hwmon interface(power1_cap).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x, 6.1.x
Correct the reference clock as 25Mhz for SMU13 fan speed calculation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x, 6.1.x
1. Rename securedisplay_cmd to ta_securedisplay_cmd.
2. Rename ta_securedisplay_max_phy to ta_securedisplay_phy_ID.
3. update securedisplay_cmd to ta_securedisplay_cmd
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Then we are able to set a new ppt limit via the hwmon interface(power1_cap).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the reference clock as 25Mhz for SMU13 fan speed calculation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove redundant log in DSC that just add additional blank prints
Signed-off-by: Praful Swarnakar <praful.swarnakar@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following errors occurred when using gcc 7.5.0-3ubuntu1~18.04:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:543:55: warning: array subscript is above array bounds [-Warray-bounds]
stream->writeback_info[j] = stream->writeback_info[i];
~~~~~~~~~~~~~~~~~~~~~~^~~
Add a check to make sure that num_wb_info won't overflowing the writeback_info buffer.
Fixes: 6fbefb84a98e ("drm/amd/display: Add DC core changes for DCN2")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx pointer cannot be NULL when getting the address of
an element of the pipe_ctx array. Moreover, the MAX_PIPES is
defined as 6, so pipe_ctx is not NULL after the loop either.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ras_block_late_init will be invoked in IP
specific ras_late_init call as a common helper for
all the IP blocks.
However, when amdgpu_ras_block_late_init call
amdgpu_ras_query_error_count to query ras error
counters, amdgpu_ras_query_error_count queries
all the IP blocks that support ras query interface.
This results to wrong error counters cached in
software copies when there are ras errors detected
at time zero or warm reset procedure. i.e., in
sdma_ras_late_init phase, it counts on sdma/mmhub
errors, while, in mmhub_ras_late_init phase, it
still counts on sdma/mmhub errors.
The change updates amdgpu_ras_query_error_count
interface to allow query specific ip error counter.
It introduces a new input parameter: query_info. if
query_info is NULL, it means query all the IP blocks,
otherwise, only query the ip block specified by
query_info.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
