As v3d_submit_tfu_ioctl() performs the same steps as
drm_gem_object_lookup(), replace the open-code implementation in v3d
with its DRM core equivalent.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221227200010.191351-1-mcanal@igalia.com
Implement the core hooks in order to provide the softMAC layer support
for passive scans. Scans are requested by the user and can be aborted.
Changing channels manually is prohibited during scans.
The implementation uses a workqueue triggered at a certain interval
depending on the symbol duration for the current channel and the
duration order provided. More advanced drivers with internal scheduling
capabilities might require additional care but there is none mainline
yet.
Received beacons during a passive scan are processed in a work queue and
their result forwarded to the upper layer.
Active scanning is not supported yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These have the exact same behavior as before, except they expect the
rtnl to be already taken (and will complain otherwise). This allows
performing MLME transmissions from different contexts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The scan logic will bypass the whole ->set_channel() logic from the top
by calling the driver hook to just switch between channels when
required.
We can no longer rely on the "current" page/channel settings to set the
right symbol duration. Let's add these as new parameters to allow
providing the page/channel couple that we want.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This helper for now only checks if the page member and channel member
are valid (in the specification range) and supported (by checking the
device capabilities). Soon two new parameters will be introduced and
having this helper will let us only modify its content rather than
modifying the logic everywhere else in the subsystem.
There is not functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa4b3115-d555-3d7f-54d1-018002e99350@secunet.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This definition will be used when adding support for scanning and defines
the content of a beacon frame header as in the 802.15.4 specification.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The ieee802154 layer should be able to scan a set of channels in order
to look for beacons advertizing PANs. Supporting this involves adding
two user commands: triggering scans and aborting scans. The user should
also be notified when a new beacon is received and also upon scan
termination.
A scan request structure is created to list the requirements and to be
accessed asynchronously when changing channels or receiving beacons.
Mac layers may now implement the ->trigger_scan() and ->abort_scan()
hooks.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
error is assigned first, so it does not need to initialize the
assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The root inode number should be set to `breq->startino` for getting stat
information of the root when XFS_BULK_IREQ_SPECIAL_ROOT is used.
Otherwise, the inode search is started from 1
(XFS_BULK_IREQ_SPECIAL_ROOT) and the inode with the lowest number in a
filesystem is returned.
Fixes: bf3cb39447 ("xfs: allow single bulkstat of special inodes")
Signed-off-by: Hironori Shiina <shiina.hironori@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Lately I've been stress-testing extreme-sized rmap btrees by using the
(new) xfs_db bmap_inflate command to clone bmbt mappings billions of
times and then using xfs_repair to build new rmap and refcount btrees.
This of course is /much/ faster than actually FICLONEing a file billions
of times.
Unfortunately, xfs_repair fails in xfs_btree_bload_compute_geometry with
EOVERFLOW, which indicates that xfs_mount.m_rmap_maxlevels is not
sufficiently large for the test scenario. For a 1TB filesystem (~67
million AG blocks, 4 AGs) the btheight command reports:
$ xfs_db -c 'btheight -n 4400801200 -w min rmapbt' /dev/sda
rmapbt: worst case per 4096-byte block: 84 records (leaf) / 45 keyptrs (node)
level 0: 4400801200 records, 52390491 blocks
level 1: 52390491 records, 1164234 blocks
level 2: 1164234 records, 25872 blocks
level 3: 25872 records, 575 blocks
level 4: 575 records, 13 blocks
level 5: 13 records, 1 block
6 levels, 53581186 blocks total
The AG is sufficiently large to build this rmap btree. Unfortunately,
m_rmap_maxlevels is 5. Augmenting the loop in the space->height
function to report height, node blocks, and blocks remaining produces
this:
ht 1 node_blocks 45 blockleft 67108863
ht 2 node_blocks 2025 blockleft 67108818
ht 3 node_blocks 91125 blockleft 67106793
ht 4 node_blocks 4100625 blockleft 67015668
final height: 5
The goal of this function is to compute the maximum height btree that
can be stored in the given number of ondisk fsblocks. Starting with the
top level of the tree, each iteration through the loop adds the fanout
factor of the next level down until we run out of blocks. IOWs, maximum
height is achieved by using the smallest fanout factor that can apply
to that level.
However, the loop setup is not correct. Top level btree blocks are
allowed to contain fewer than minrecs items, so the computation is
incorrect because the first time through the loop it should be using a
fanout factor of 2. With this corrected, the above becomes:
ht 1 node_blocks 2 blockleft 67108863
ht 2 node_blocks 90 blockleft 67108861
ht 3 node_blocks 4050 blockleft 67108771
ht 4 node_blocks 182250 blockleft 67104721
ht 5 node_blocks 8201250 blockleft 66922471
final height: 6
Fixes: 9ec691205e ("xfs: compute the maximum height of the rmap btree when reflink enabled")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Fix the following W=1 warnings:
arch/x86/lib/cmdline.c:
- Include <asm/cmdline.h> to fix missing-prototypes warnings.
- Update comment for __cmdline_find_option_bool to fix a kernel-doc warning.
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230103114725.108431-1-anuradha@debian.org
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
I225 have limitation when programming the BaseTime register which required
a power cycle of the controller. This limitation already lifted in I226.
This patch removes the restriction so that when user configure/remove any
TSN mode, it would not go into power cycle reset adapter.
How to test:
Schedule any gate control list configuration or delete it.
Example:
1)
BASE_TIME=$(date +%s%N)
tc qdisc replace dev $interface_name parent root handle 100 taprio \
num_tc 4 \
map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE_TIME \
sched-entry S 0F 1000000 \
flags 0x2
2) tc qdisc del dev $intername_name root
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make reset task only executes for i225 and Qbv disabling to allow
i226 configure for 2nd GCL without resetting the adapter.
In i226, Tx won't hang if there is a GCL is already running, so in
this case we don't need to set FutScdDis bit.
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the Qbv BaseTime restriction for I226 so that the BaseTime can be
scheduled to the future time. A new register bit of Tx Qav Control
(Bit-7: FutScdDis) was introduced to allow I226 scheduling future time as
Qbv BaseTime and not having the Tx hang timeout issue.
Besides, according to datasheet section 7.5.2.9.3.3, FutScdDis bit has to
be configured first before the cycle time and base time.
Indeed the FutScdDis bit is only active on re-configuration, thus we have
to set the BASET_L to zero and then only set it to the desired value.
Please also note that the Qbv configuration flow is moved around based on
the Qbv programming guideline that is documented in the latest datasheet.
Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The variable becomes useless since we moved the snd_soc_jack
structure from a static array to sof_hdmi_pcm structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230103073704.722027-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With below two cases, it will cause NULL pointer dereference when
accessing SM_I(sbi)->fcc_info in f2fs_issue_flush().
a) If kthread_run() fails in f2fs_create_flush_cmd_control(), it will
release SM_I(sbi)->fcc_info,
- mount -o noflush_merge /dev/vda /mnt/f2fs
- mount -o remount,flush_merge /dev/vda /mnt/f2fs -- kthread_run() fails
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
b) we will never allocate memory for SM_I(sbi)->fcc_info w/ below
testcase,
- mount -o ro /dev/vda /mnt/f2fs
- mount -o rw,remount /dev/vda /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
In order to fix this issue, let change as below:
- fix error path handling in f2fs_create_flush_cmd_control().
- allocate SM_I(sbi)->fcc_info even if readonly is on.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When unloading the SCMI core stack module, configured to use the virtio
SCMI transport, LOCKDEP reports the splat down below about unsafe locks
dependencies.
In order to avoid this possible unsafe locking scenario call upfront
virtio_break_device() before getting hold of vioch->lock.
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.1.0-00067-g6b934395ba07-dirty #4 Not tainted
-----------------------------------------------------
rmmod/307 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffff000080c510e0 (&dev->vqs_list_lock){+.+.}-{3:3}, at: virtio_break_device+0x28/0x68
and this task is already holding:
ffff00008288ada0 (&channels[i].lock){-.-.}-{3:3}, at: virtio_chan_free+0x60/0x168 [scmi_module]
which would create a new lock dependency:
(&channels[i].lock){-.-.}-{3:3} -> (&dev->vqs_list_lock){+.+.}-{3:3}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&channels[i].lock){-.-.}-{3:3}
... which became HARDIRQ-irq-safe at:
lock_acquire+0x128/0x398
_raw_spin_lock_irqsave+0x78/0x140
scmi_vio_complete_cb+0xb4/0x3b8 [scmi_module]
vring_interrupt+0x84/0x120
vm_interrupt+0x94/0xe8
__handle_irq_event_percpu+0xb4/0x3d8
handle_irq_event_percpu+0x20/0x68
handle_irq_event+0x50/0xb0
handle_fasteoi_irq+0xac/0x138
generic_handle_domain_irq+0x34/0x50
gic_handle_irq+0xa0/0xd8
call_on_irq_stack+0x2c/0x54
do_interrupt_handler+0x8c/0x90
el1_interrupt+0x40/0x78
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
_raw_write_unlock_irq+0x48/0x80
ep_start_scan+0xf0/0x128
do_epoll_wait+0x390/0x858
do_compat_epoll_pwait.part.34+0x1c/0xb8
__arm64_sys_epoll_pwait+0x80/0xd0
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.3+0x98/0x120
do_el0_svc+0x34/0xd0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
to a HARDIRQ-irq-unsafe lock:
(&dev->vqs_list_lock){+.+.}-{3:3}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0x128/0x398
_raw_spin_lock+0x58/0x70
__vring_new_virtqueue+0x130/0x1c0
vring_create_virtqueue+0xc4/0x2b8
vm_find_vqs+0x20c/0x430
init_vq+0x308/0x390
virtblk_probe+0x114/0x9b0
virtio_dev_probe+0x1a4/0x248
really_probe+0xc8/0x3a8
__driver_probe_device+0x84/0x190
driver_probe_device+0x44/0x110
__driver_attach+0x104/0x1e8
bus_for_each_dev+0x7c/0xd0
driver_attach+0x2c/0x38
bus_add_driver+0x1e4/0x258
driver_register+0x6c/0x128
register_virtio_driver+0x2c/0x48
virtio_blk_init+0x70/0xac
do_one_initcall+0x84/0x420
kernel_init_freeable+0x2d0/0x340
kernel_init+0x2c/0x138
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->vqs_list_lock);
local_irq_disable();
lock(&channels[i].lock);
lock(&dev->vqs_list_lock);
<Interrupt>
lock(&channels[i].lock);
*** DEADLOCK ***
================
Fixes: 42e90eb53b ("firmware: arm_scmi: Add a virtio channel refcount")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A misbheaving SCMI platform firmware could reply with out-of-spec
notifications, shorter than the mimimum size comprising a header.
Fixes: d5141f37c4 ("firmware: arm_scmi: Add notifications support in transport layer")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A misbheaving SCMI platform firmware could reply with out-of-spec messages,
shorter than the mimimum size comprising a header and a status field.
Harden shmem_fetch_response to properly truncate such a bad messages.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stale error status reported from a previous message transaction must be
cleared before starting a new transaction to avoid being confusingly
reported in the following SCMI message dump traces.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As a shift exponent, db_agl2size can not be less than 0. Add the missing
check to fix the shift-out-of-bounds bug reported by syzkaller:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:2227:15
shift exponent -744642816 is negative
Reported-by: syzbot+0be96567042453c0c820@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Currently, i915 interacts with the Hardware and not with any DMC
ABI/API, so the API is fixed within the platform, hence no need to get
this so-tied version requirement.
v2:
- Use link to firmware guide from kernel documentation for
"References:" instead of mailing list thread. (Rodrigo)
- Provide a more elaborate justification in the commit message.
(Rodrigo)
References: https://www.kernel.org/doc/html/v6.1/driver-api/firmware/firmware-usage-guidelines.html
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221230182422.29680-2-gustavo.sousa@intel.com
When devres_open_group() fails, it returns -ENOMEM without freeing memory
allocated by edac_mc_alloc().
Call edac_mc_free() on the error handling path to avoid a memory leak.
[ bp: Massage commit message. ]
Fixes: a1b01edb27 ("edac: add support for Calxeda highbank memory controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221229054825.1361993-1-linmq006@gmail.com
This fixes the definition of the PM8550 ldo11 regulator matching it's
capabilities since this LDO is designed to work between 1,2V and 1,5V.
Fixes: e6e3776d68 ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230102-topic-sm8550-upstream-fixes-reg-l11b-nldo-v1-1-d97def246338@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A 100 ms delay is inserted between tests by default in order to "detect
the individual tests when using a logic analyzer". However, such delays
are unnecessary when using this module for automated regression testing,
so allow them to be disabled with a module parameter.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20230103152211.3034779-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[BUG]
Even with commit 81d5d61454 ("btrfs: enhance unsupported compat RO
flags handling"), btrfs can still mount a fs with unsupported compat_ro
flags read-only, then remount it RW:
# btrfs ins dump-super /dev/loop0 | grep compat_ro_flags -A 3
compat_ro_flags 0x403
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID |
unknown flag: 0x400 )
# mount /dev/loop0 /mnt/btrfs
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
^^^ RW mount failed as expected ^^^
# dmesg -t | tail -n5
loop0: detected capacity change from 0 to 1048576
BTRFS: device fsid cb5b82f5-0fdd-4d81-9b4b-78533c324afa devid 1 transid 7 /dev/loop0 scanned by mount (1146)
BTRFS info (device loop0): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device loop0): using free space tree
BTRFS error (device loop0): cannot mount read-write because of unknown compat_ro features (0x403)
BTRFS error (device loop0): open_ctree failed
# mount /dev/loop0 -o ro /mnt/btrfs
# mount -o remount,rw /mnt/btrfs
^^^ RW remount succeeded unexpectedly ^^^
[CAUSE]
Currently we use btrfs_check_features() to check compat_ro flags against
our current mount flags.
That function get reused between open_ctree() and btrfs_remount().
But for btrfs_remount(), the super block we passed in still has the old
mount flags, thus btrfs_check_features() still believes we're mounting
read-only.
[FIX]
Replace the existing @sb argument with @is_rw_mount.
As originally we only use @sb to determine if the mount is RW.
Now it's callers' responsibility to determine if the mount is RW, and
since there are only two callers, the check is pretty simple:
- caller in open_ctree()
Just pass !sb_rdonly().
- caller in btrfs_remount()
Pass !(*flags & SB_RDONLY), as our check should be against the new
flags.
Now we can correctly reject the RW remount:
# mount /dev/loop0 -o ro /mnt/btrfs
# mount -o remount,rw /mnt/btrfs
mount: /mnt/btrfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n 1
BTRFS error (device loop0: state M): cannot mount read-write because of unknown compat_ro features (0x403)
Reported-by: Chung-Chiang Cheng <shepjeng@gmail.com>
Fixes: 81d5d61454 ("btrfs: enhance unsupported compat RO flags handling")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled. This can lead to very little useful info for
debugging.
This patch will:
- Add extra info for error reporting
Including:
* logical bytenr
* num_bytes
* type
* action
* ref_mod
- Replace the btrfs_debug() with btrfs_err()
- Move the error reporting into run_one_delayed_ref()
This is to avoid use-after-free, the @node can be freed in the caller.
This error should only be triggered at most once.
As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:
btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs_for_head()
`- run_one_delayed_ref()
And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Yang Yingliang <yangyingliang@huawei.com>:
After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy
named function devm_spi_alloc_master/spi_alloc_master() can be replaced.
And also change other legacy name master/slave to modern name host/target
or controller.
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device.
Reported-by: 小太 <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During lseek, when searching for delalloc in a range that represents a
hole and that range has a length of 1 byte, we end up not doing the actual
delalloc search in the inode's io tree, resulting in not correctly
reporting the offset with data or a hole. This actually only happens when
the start offset is 0 because with any other start offset we round it down
by sector size.
Reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -q 0 1" /mnt/sdc/foo
$ xfs_io -c "seek -d 0" /mnt/sdc/foo
Whence Result
DATA EOF
It should have reported an offset of 0 instead of EOF.
Fix this by updating btrfs_find_delalloc_in_range() and count_range_bits()
to deal with inclusive ranges properly. These functions are already
supposed to work with inclusive end offsets, they just got it wrong in a
couple places due to off-by-one mistakes.
A test case for fstests will be added later.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20221223020509.457113-1-joanbrugueram@gmail.com/
Fixes: b6e833567e ("btrfs: make hole and data seeking a lot more efficient")
CC: stable@vger.kernel.org # 6.1
Tested-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report that on a RAID0 NVMe btrfs system, under heavy
write load the filesystem can flip RO randomly.
With extra debugging, it shows some tree blocks failed to pass their
level checks, and if that happens at critical path of a transaction, we
abort the transaction:
BTRFS error (device nvme0n1p3): level verify failed on logical 5446121209856 mirror 1 wanted 0 found 1
BTRFS error (device nvme0n1p3: state A): Transaction aborted (error -5)
BTRFS: error (device nvme0n1p3: state A) in btrfs_finish_ordered_io:3343: errno=-5 IO failure
BTRFS info (device nvme0n1p3: state EA): forced readonly
[CAUSE]
The reporter has already bisected to commit 947a629988 ("btrfs: move
tree block parentness check into validate_extent_buffer()").
And with extra debugging, it shows we can have btrfs_tree_parent_check
filled with all zeros in the following call trace:
submit_one_bio+0xd4/0xe0
submit_extent_page+0x142/0x550
read_extent_buffer_pages+0x584/0x9c0
? __pfx_end_bio_extent_readpage+0x10/0x10
? folio_unlock+0x1d/0x50
btrfs_read_extent_buffer+0x98/0x150
read_tree_block+0x43/0xa0
read_block_for_search+0x266/0x370
btrfs_search_slot+0x351/0xd30
? lock_is_held_type+0xe8/0x140
btrfs_lookup_csum+0x63/0x150
btrfs_csum_file_blocks+0x197/0x6c0
? sched_clock_cpu+0x9f/0xc0
? lock_release+0x14b/0x440
? _raw_read_unlock+0x29/0x50
btrfs_finish_ordered_io+0x441/0x860
btrfs_work_helper+0xfe/0x400
? lock_is_held_type+0xe8/0x140
process_one_work+0x294/0x5b0
worker_thread+0x4f/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xf5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
Currently we only copy the btrfs_tree_parent_check structure into bbio
at read_extent_buffer_pages() after we have assembled the bbio.
But as shown above, submit_extent_page() itself can already submit the
bbio, leaving the bbio->parent_check uninitialized, and cause the false
alert.
[FIX]
Instead of copying @check into bbio after bbio is assembled, we pass
@check in btrfs_bio_ctrl::parent_check, and copy the content of
parent_check in submit_one_bio() for metadata read.
By this we should be able to pass the needed info for metadata endio
verification, and fix the false alert.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CABXGCsNzVxo4iq-tJSGm_kO1UggHXgq6CdcHDL=z5FL4njYXSQ@mail.gmail.com/
Fixes: 947a629988 ("btrfs: move tree block parentness check into validate_extent_buffer()")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From a recent regression report, we found that after commit 947a629988
("btrfs: move tree block parentness check into
validate_extent_buffer()") if we have a level mismatch (false alert
though), there is no error message at all.
This makes later debugging harder. This patch will add the proper error
message for such case.
Link: https://lore.kernel.org/linux-btrfs/CABXGCsNzVxo4iq-tJSGm_kO1UggHXgq6CdcHDL=z5FL4njYXSQ@mail.gmail.com/
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The em->len value is supposed to be verified in the assertion condition
though we expect it to be same as the sectorsize.
Fixes: a196a8944f ("btrfs: do not reset extent map members for inline extents read")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
