The qcm2290's ln_bb_clk2 is identical to the freshly added msm8998's
ln_bb_clk2 one. Use the latter and drop the SoC-specific version.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-7-dmitry.baryshkov@linaro.org
The commit eaeee28db2 ("clk: qcom: smd: Add support for QCS404 rpm
clocks") defined the pin-controlled ln_bb_clk clocks, but didn't add
them to the qcs404_clks array. Add them to make these clocks usable to
platform devices.
Fixes: eaeee28db2 ("clk: qcom: smd: Add support for QCS404 rpm clocks")
Reviewed-by: Alex Elder <elder@linaro.org?
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-3-dmitry.baryshkov@linaro.org
Building ramp_controller under x86_64 results in the following build
error:
error: implicit declaration of function 'FIELD_PREP' is invalid in C99
Include linux/bitfield.h to ensure FIELD_PREP() is declared.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DCC is a DMA Engine designed to capture and store data
during system crash or software triggers. The DCC operates
based on user inputs via the debugfs interface. The user gives
addresses as inputs and these addresses are stored in the
dcc sram. In case of a system crash or a manual software
trigger by the user through the debugfs interface,
the dcc captures and stores the values at these addresses.
This patch contains the driver which has all the methods
pertaining to the debugfs interface, auxiliary functions to
support all the four fundamental operations of dcc namely
read, write, read/modify/write and loop. The probe method
here instantiates all the resources necessary for dcc to
operate mainly the dedicated dcc sram where it stores the
values. The DCC driver can be used for debugging purposes
without going for a reboot since it can perform software
triggers as well based on user inputs.
Also add the documentation for debugfs entries which explains
the functionalities of each debugfs file that has been created
for dcc.
The following is the justification of using debugfs interface
over the other alternatives like sysfs/ioctls
i) As can be seen from the debugfs attribute descriptions,
some of the debugfs attribute files here contains multiple
arguments which needs to be accepted from the user. This goes
against the design style of sysfs.
ii) The user input patterns have been made simple and convenient
in this case with the use of debugfs interface as user doesn't
need to shuffle between different files to execute one instruction
as was the case on using other alternatives.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
[bjorn: Fixed up a few indents and line wraps]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/644b4f66a358492a8a6738454035c3b120092fe7.1672148732.git.quic_schowdhu@quicinc.com
VAC needs to be wired up to produce proper measurements,
without this change only near zero values are reported.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1696f36482 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When device is in active mode, it fails to set an ACCEL full-scale
range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the
datasheet, but it is a fxos8700 chip behavior.
Keep the device in standby mode before setting ACCEL full-scale range
into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting
scale phase.
Fixes: 84e5ddd5c4 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
14-bit left-justified sample data and MAGN output data registers
contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL
raw register output data should be divided by 4 before sent to
userspace.
Apply a 2 bits signed right shift to the raw data from ACCEL output
data register but keep that from MAGN sensor as the origin.
Fixes: 84e5ddd5c4 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The length of ACCEL and MAGN 3-axis channels output data is 6 byte
individually. However block only read 3 bytes data into buffer from
ACCEL or MAGN output data registers every time. It causes an incomplete
ACCEL and MAGN channels readback.
Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and
MAGN channels readback.
Fixes: 84e5ddd5c4 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Because ACCEL and MAGN channels data register base address is
swapped the accelerometer and magnetometer channels readback is
swapped.
Fixes: 84e5ddd5c4 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor.
Sensor type is indexed by corresponding channel type in a switch.
IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion.
Fix the mapping label of "IIO_MAGN" channel type instead of
"IIO_ANGL_VEL" channel type to MAGN sensor.
Fixes: 84e5ddd5c4 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some inputs need to be wired up to produce proper measurements,
without this change only near zero values are reported.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 1696f36482 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
irq flood happen when run
cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw
imx8qxp_adc_read_raw()
{
...
enable irq
/* adc start */
writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG);
^^^^ trigger irq flood.
wait_for_completion_interruptible_timeout();
readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO);
^^^^ clear irq here.
...
}
There is only FIFO watermark interrupt at this ADC controller.
IRQ line will be assert until software read data from FIFO.
So IRQ flood happen during wait_for_completion_interruptible_timeout().
Move FIFO read into irq handle to avoid irq flood.
Fixes: 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The clang-analyzer reported a warning: "Value stored to 'ret'
is never read".
Fix the return value check if devm_krealloc() fails to resize
ams_channels.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
of_get_parent() will return a device_node pointer with refcount
incremented. We need to use of_node_put() on it when done. Add the
missing of_node_put() in the error path of berlin2_adc_probe();
Fixes: 70f1937911 ("iio: adc: add support for Berlin")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When STM32 DFSDM driver is built as module, no modalias information
is available. This prevents module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fill module aliases.
Fixes: e2e6771c64 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress
probe-deferral error message") the ADC5 driver also spams a similar
probe-deferral error on startup when a channel is not yet available:
[ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517
Suppress it by using dev_err_probe instead, which also takes care of
storing the message as reason for deferring.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221216190945.902754-1-marijn.suijten@somainline.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
PM callbacks take struct device pointer as a parameter, use
dev_get_drvdata() to retrieve it instead of unneeded double
loop of referencing via i2c_get_clientdata(to_i2c_client(dev)).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no in-kernel user for legacy platform data.
Otherwise, a new one can use software nodes instead.
Hence, drop legacy platform data code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The CALIB_FRAC() is defined and might had been used in
tsl2563_calib_from_sysfs(). But let's just move a comment
from it to the latter function.
CLAIB_FRAC_HALF is used in a single place, i.e. in
tsl2563_calib_to_sysfs(). So, let's just inline it there.
While at it, switch to use DIV_ROUND_CLOSEST().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce tsl2563_configure_irq() to configure INT in one place.
While at it, make use of TSL2563_INT_LEVEL and newly introduced
TSL2563_INT_MASK.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Driver already uses the word accessors when it makes sense, but
in the tsl2563_configure(). Switch the latter to use word accessor.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_RAISING,
let's respect the settings specified in the firmware description.
To be compatible with the older firmware descriptions, if trigger
type is not set up there, we'll set it to default (raising edge).
Fixes: 388be48839 ("staging:iio: tsl2563 abi fixes and interrupt handling")
Fixes: bdab100173 ("staging:iio:light:tsl2563 remove old style event registration.")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221207190348.9347-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-133-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All the remaining calls in probe() have devm_ equivalents so
switching to those allows the remove() callbacks to be deleted.
No functional change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-15-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver only turns the power on at probe and off at remove.
The new devm_regulator_get_enable() replaces this boilerplate code.
Some additional refactoring to drop now unnecessary unwinding after
this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-14-jic23@kernel.org
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-3-jic23@kernel.org
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212011156314630626@zte.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212011142333790361@zte.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD5337 belongs to the same family as the AD5338.
The difference is that the AD5337 has 8-bit precision instead of 10-bit.
Add support for the AD5337 chip in the driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20221130182632.3856675-2-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD5337 belongs to the same family as the AD5338.
The difference is that the AD5337 has 8-bit resolution instead of 10-bit.
Add a compatible entry for AD5337.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221130182632.3856675-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The TI LMP92064 is a dual 12 Bit ADC connected via SPI.
The two channels are intended for simultaneous measurements of the voltage
across- and current through a load to allow accurate instantaneous power
measurements.
The driver does not yet take advantage of this feature, as buffering is not
yet implemented.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20221128133503.1355898-2-l.goehrs@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add binding documentation for the TI LMP92064 dual channel SPI ADC.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221128133503.1355898-1-l.goehrs@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linux has a driver for these ADCs at drivers/iio/adc/ti-adc081c.c, but
the compatible strings were undocumented. Add a binding for them. The
hardware has an alert interrupt output, but existing ti,adc081c users
do not provide the 'interrupts' property, so leave it as optional.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221125220903.8632-1-samuel@sholland.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
