Generalize the (somewhat implicit) rule of regsafe(), which states that
if register types in old and current states do not match *exactly*, they
can't be safely considered equivalent.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make generic check to prevent XXX_OR_NULL and XXX register types to be
intermixed. While technically in some situations it could be safe, it's
impossible to enforce due to the loss of an ID when converting
XXX_OR_NULL to its non-NULL variant. So prevent this in general, not
just for PTR_TO_MAP_KEY and PTR_TO_MAP_VALUE.
PTR_TO_MAP_KEY_OR_NULL and PTR_TO_MAP_VALUE_OR_NULL checks, which were
previously special-cased, are simplified to generic check that takes
into account range_within() and tnum_in(). This is correct as BPF
verifier doesn't allow arithmetic on XXX_OR_NULL register types, so
var_off and ranges should stay zero. But even if in the future this
restriction is lifted, it's even more important to enforce that var_off
and ranges are compatible, otherwise it's possible to construct case
where this can be exploited to bypass verifier's memory range safety
checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move id and ref_obj_id fields after scalar data section (var_off and
ranges). This is necessary to simplify next patch which will change
regsafe()'s logic to be safer, as it makes the contents that has to be
an exact match (type-specific parts, off, type, and var_off+ranges)
a single sequential block of memory, while id and ref_obj_id should
always be remapped and thus can't be memcp()'ed.
There are few places that assume that var_off is after id/ref_obj_id to
clear out id/ref_obj_id with the single memset(0). These are changed to
explicitly zero-out id/ref_obj_id fields. Other places are adjusted to
preserve exact byte-by-byte comparison behavior.
No functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
states_equal() check performs ID mapping between old and new states to
establish a 1-to-1 correspondence between IDs, even if their absolute
numberic values across two equivalent states differ. This is important
both for correctness and to avoid unnecessary work when two states are
equivalent.
With recent changes we partially fixed this logic by maintaining ID map
across all function frames. This patch also makes refsafe() check take
into account (and maintain) ID map, making states_equal() behavior more
optimal and correct.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For the sake of symmetry with intel_config_get_pull(), add
a default case to the outer switch.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make the offb (Open Firmware frame buffer) driver tristate,
i.e., so that it can be built as a loadable module.
However, it still depends on the setting of DRM_OFDRM
so that both of these drivers cannot be builtin at the same time
nor can one be builtin and the other one a loadable module.
Build-tested successfully with all combination of DRM_OFDRM and FB_OF.
This fixes a build issue that Michal reported when FB_OF=y and
DRM_OFDRM=m:
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x58): undefined reference to `cfb_fillrect'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x60): undefined reference to `cfb_copyarea'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x68): undefined reference to `cfb_imageblit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX213&214 DTSIs to better document the hardware.
Diff between 223 and 224:
pm8350b
< gpio-line-names = "NC", /* GPIO_1 */
> gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
< "NC",
> "CAM_PWR_LD_EN",
pm8350c
< "NC",
> "WLC_TXPWR_EN",
Which is due to different camera power wiring on 213 and lack of an
additional SLG51000 PMIC on 214.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118152028.59312-3-konrad.dybcio@linaro.org
Remove the mention of this PMIC from the common DTSI, as it's not
used on PDX214. Add the required nodes to support it on PDX215.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118152028.59312-2-konrad.dybcio@linaro.org
The MPSS PAS remoteproc bindings require memory-region. The MPSS PAS
device node is disabled, but schema still asks for it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118113747.56700-1-krzysztof.kozlowski@linaro.org
Convert the non-SMD RPM node bindings to dt-schema, the old txt bindings
are now removed since all bindings were converted.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v5-2-910019fb8b9b@linaro.org
The Ramp Controller is used to program the sequence ID for pulse
swallowing, enable sequence and linking sequence IDs for the CPU
cores on some Qualcomm SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117132956.169432-3-angelogioacchino.delregno@collabora.com
Document the Qualcomm Ramp Controller, found on various legacy
Qualcomm SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117132956.169432-2-angelogioacchino.delregno@collabora.com
Replace construct that matches generic_handle_irq(irq_find_mapping())
to a single call to generic_handle_domain_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add the newly documented SoC compatible to MDIO in order to be able to
validate clocks for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-5-robimarko@gmail.com
For the size-based communities, always use gpp_num_padown_regs,
which is now provided explicitly via INTEL_COMMUNITY_SIZE() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_*() common macro instead custom SPT_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom TGL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom MTL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_SIZE() common macro instead custom LBG_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom LKF_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom JSL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom ICL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_SIZE() common macro instead custom GLK_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom EBG_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom EHL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom DNV_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom CDF_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom CNL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_SIZE() common macro instead custom BXT_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use INTEL_COMMUNITY_GPPS() common macro instead custom ADL_COMMUNITY().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now it becomes visible that we can deduplicate SoC specific
*_COMMUNITY() macros across the Intel pin control drivers.
For that, introduce a common INTEL_COMMUNITY_GPPS() and
INTEL_COMMUNITY_SIZE() macros in the pinctrl-intel.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to DTS and Linux driver, the MSM8996 SLPI PIL takes two clocks
- xo and aggre2:
qcom/msm8996-oneplus3t.dtb: remoteproc@1c00000: clocks: [[20], [3, 64]] is too long
qcom/msm8996-oneplus3t.dtb: remoteproc@1c00000: clock-names: ['xo', 'aggre2'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-16-krzysztof.kozlowski@linaro.org
Split SC7180 and SC7280remote processor Peripheral Authentication
Service bindings into their own file to reduce complexity and make
maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-15-krzysztof.kozlowski@linaro.org
Split QCS404 remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-14-krzysztof.kozlowski@linaro.org
Split SDX55 remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-13-krzysztof.kozlowski@linaro.org
Split SC8180x remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
The binding is incomplete due to lack of upstreamed DTS - no example and
not all power domains defined.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-12-krzysztof.kozlowski@linaro.org
Split SC8280XP remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
While moving correctly constrain the number of interrupts per specific
device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-11-krzysztof.kozlowski@linaro.org
Split SM6350 remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-10-krzysztof.kozlowski@linaro.org
Split SM8150 and SM8250 remote processor Peripheral Authentication
Service bindings into their own file to reduce complexity and make
maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-9-krzysztof.kozlowski@linaro.org
Split SM8350 and SM8450 remote processor Peripheral Authentication
Service bindings into their own file to reduce complexity and make
maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-8-krzysztof.kozlowski@linaro.org
Split common part of Qualcomm SoC Peripheral Authentication Service
bindings into a re-usable schema file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-7-krzysztof.kozlowski@linaro.org
Some remote processors (e.g. QCS404 CDSP, SC7180 MPSS/MSS) can be brought
to life using two different bindings:
1. PIL (Peripheral Image Loader)
2. PAS (Peripheral Authentication Service)
They still describe the same hardware - firmware load for remote
processor - but use different methods to communicate with that
processor.
For these SoCs, the qcom,adsp.yaml bindings were describing the PAS
method, however for easier customization of board DTS, the bindings
combined additional properties from PIL: reset lines, qcom,halt-regs and
additional clocks. The devices and Linux kernel drivers, when
instantiated as PAS, do not use these properties, so drop them from the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-6-krzysztof.kozlowski@linaro.org
The SC7180 MPSS/MSS remote processor can be brought to life using two
different bindings:
1. qcom,sc7280-mpss-pas - currently used in DTSI
2. qcom,sc7280-mss-pil
Move the properties related to qcom,sc7180-mss-pil (qcom,halt-regs,
qcom,ext-regs, qcom,qaccept-regs, resets and additional clocks) to
specific board using the PIL, to silence DT schema warnings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-5-krzysztof.kozlowski@linaro.org
The SC7180 MPSS/MSS remote processor can be brought to life using two
different bindings:
1. qcom,sc7180-mpss-pas - currently used in DTSI
2. qcom,sc7180-mss-pil
Move the properties related to qcom,sc7180-mss-pil (qcom,halt-regs,
qcom,spare-regs, resets, additional clocks and regs) to specific boards
using the PIL, to silence DT schema warnings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-4-krzysztof.kozlowski@linaro.org
The QCS404 CDSP remote processor can be brought to life using two
different bindings:
1. qcom,qcs404-cdsp-pas - currently used in DTSI.
2. qcom,qcs404-cdsp-pil.
Comment out the properties related to qcom,qcs404-cdsp-pil
(qcom,halt-regs, resets and additional clocks), to silence DT schema
warnings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-3-krzysztof.kozlowski@linaro.org
The smd-edge node does not have children with unit addresses:
qcom/msm8996-oneplus3.dtb: remoteproc@9300000: smd-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124184333.133911-2-krzysztof.kozlowski@linaro.org
The serial and clock drivers will be enabled by default if the symbol
itself is enabled, so stop directly selecting the drivers in
Kconfigs.socs.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
While we cannot yet drop the SOC_ prefixed symbols, we can convert
uses of these symbols within Kconfig.socs to the ARCH_ variants.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The SiFive clock and serial drivers will now default to the value of
SOC_SIFIVE so there is no need to directly select their symbols
anymore.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
