- Restore MSI remapping configuration during resume because the
configuration is cleared out by firmware when suspending (Nirmal Patel)
- Reset the hierarchy below VMD when probing the VMD; we attempted this
before, but with the wrong device, so it didn't work (Francisco Munoz)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: vmd: Disable MSI remapping after suspend
- Switch from devm_gpiod_get_from_of_node() to devm_fwnode_gpiod_get()
(Dmitry Torokhov)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Switch to using devm_fwnode_gpiod_get
- Add sentinel to mt7621_pcie_quirks_match[] to prevent oops when parsing
the table (John Thomson)
* remotes/lorenzo/pci/mt7621:
PCI: mt7621: Add sentinel to quirks table
- Enable Multi-MSI (Jim Quinlan)
- Wait for 100ms after PERST# deassert for power and clocks to stabilize
(Jim Quinlan)
- Use readl_poll_timeout_atomic() instead of hand-rolled timeout loop (Jim
Quinlan)
- Drop needless "inline" annotations (Jim Quinlan)
- Set RCB_MPS mode bit so data for reads up to MPS are returned in a single
completion (Jim Quinlan)
* remotes/lorenzo/pci/brcmstb:
PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits
PCI: brcmstb: Drop needless 'inline' annotations
PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()
PCI: brcmstb: Wait for 100ms following PERST# deassert
PCI: brcmstb: Enable Multi-MSI
- Remove EfiMemoryMappedIO regions from the E820 map to allow PCI core to
allocate BARs from them. The only purpose of EfiMemoryMappedIO is to
tell the OS to map things needed by EFI runtime services, so it's often
used for PCI host bridge apertures. If we can't allocate from those
apertures, we can't hot-add devices (Bjorn Helgaas)
* pci/resource:
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
- Squash portdrv_core.c and portdrv_pci.c into portdrv.c to make it easier
to find things (Bjorn Helgaas)
- Allow AER service only for Root Ports & RCECs so portdrv can successfully
bind to other devices that have AER but lack MSI (which they don't need
for AER), which allows power management for those devices (Bjorn Helgaas)
* pci/portdrv:
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI/portdrv: Unexport pcie_port_service_register(), pcie_port_service_unregister()
PCI/portdrv: Move private things to portdrv.c
PCI/portdrv: Squash into portdrv.c
- Convert AGP efficeon, intel, amd-k7, ati, nvidia to generic power
management (Bjorn Helgaas)
* pci/pm-agp:
agp/via: Update to DEFINE_SIMPLE_DEV_PM_OPS()
agp/sis: Update to DEFINE_SIMPLE_DEV_PM_OPS()
agp/amd64: Update to DEFINE_SIMPLE_DEV_PM_OPS()
agp/nvidia: Convert to generic power management
agp/ati: Convert to generic power management
agp/amd-k7: Convert to generic power management
agp/intel: Convert to generic power management
agp/efficeon: Convert to generic power management
- Use METHOD_NAME__UID instead of plain string to make it easier to find
all uses (Yipeng Zou)
* pci/misc:
PCI/ACPI: Use METHOD_NAME__UID instead of plain string
- Enable pciehp by default if USB4 is enabled because USB4/Thunderbolt
tunneling depends on native PCIe hotplug (Albert Zhou)
- Make sure pciehp binds only to Downstream Ports, not Upstream Ports
(Rafael J. Wysocki)
- Remove unused get_mode1_ECC_cap callback in shpchp (Ian Cowan)
- Enable pciehp Command Completed Interrupt only if supported to reduce
confusion when looking at lspci output (Pali Rohár)
* pci/hotplug:
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: shpchp: Remove unused get_mode1_ECC_cap callback
PCI: acpiphp: Avoid setting is_hotplug_bridge for PCIe Upstream Ports
PCI/portdrv: Set PCIE_PORT_SERVICE_HP for Root and Downstream Ports only
PCI: pciehp: Enable by default if USB4 enabled
- Only read/write PCIe Link 2 registers for devices with Links and PCIe
Capability version >= 2 (Maciej W. Rozycki)
- Revert a patch that cleared PCI_STATUS during enumeration because it
broke Linux guests on Apple's virtualization framework (Bjorn Helgaas)
- Assign PCI domain IDs using IDAs so IDs can be easily reused after
loading/unloading host bridge drivers (Pali Rohár)
- Fix pci_device_is_present(), which previously always returned "false" for
VFs because their vendor ID is always 0xfff (Michael S. Tsirkin)
- Check for alloc failure in pci_request_irq() (Zeng Heng)
* pci/enumeration:
PCI: Check for alloc failure in pci_request_irq()
PCI: Fix pci_device_is_present() for VFs by checking PF
PCI: Assign PCI domain IDs by ida_alloc()
Revert "PCI: Clear PCI_STATUS when setting up device"
PCI: Access Link 2 registers only for devices with Links
- Fix calculation of DOE length to account for the "0 means 2^18 DWORDs"
special case (Li Ming)
* pci/doe:
PCI/DOE: Fix maximum data object length miscalculation
Use pr_info() and similar when possible. No functional change intended.
Link: https://lore.kernel.org/r/20221209205131.GA1726524@bhelgaas
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add missing word in the log message:
- ... so future kernels can this automatically
+ ... so future kernels can do this automatically
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20221208190341.1560157-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
These messages:
clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
aren't as useful as they could be because (a) the resource is often
IORESOURCE_UNSET, so we print the size instead of the start/end and (b) we
print the available resource even if it is empty after removing the E820
entry.
Print the available space by hand to avoid the IORESOURCE_UNSET problem and
only if it's non-empty. No functional change intended.
Link: https://lore.kernel.org/r/20221208190341.1560157-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
pci_bus_alloc_from_region() allocates MMIO space by iterating through all
the resources available on the bus. The available resource might be
reduced if the caller requires 32-bit space or we're avoiding BIOS or E820
areas.
Don't bother calling allocate_resource() if we need more space than is
available in this resource. This prevents some pointless and annoying
messages about avoided areas.
Link: https://lore.kernel.org/r/20221208190341.1560157-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Firmware can use EfiMemoryMappedIO to request that MMIO regions be mapped
by the OS so they can be accessed by EFI runtime services, but should have
no other significance to the OS (UEFI r2.10, sec 7.2). However, most
bootloaders and EFI stubs convert EfiMemoryMappedIO regions to
E820_TYPE_RESERVED entries, which prevent Linux from allocating space from
them (see remove_e820_regions()).
Some platforms use EfiMemoryMappedIO entries for PCI MMCONFIG space and PCI
host bridge windows, which means Linux can't allocate BAR space for
hot-added devices.
Remove large EfiMemoryMappedIO regions from the E820 map to avoid this
problem.
Leave small (< 256KB) EfiMemoryMappedIO regions alone because on some
platforms, these describe non-window space that's included in host bridge
_CRS. If we assign that space to PCI devices, they don't work. On the
Lenovo X1 Carbon, this leads to suspend/resume failures.
The previous solution to the problem of allocating BARs in these regions
was to add pci_crs_quirks[] entries to disable E820 checking for these
machines (see d341838d77 ("x86/PCI: Disable E820 reserved region clipping
via quirks")):
Acer DMI_PRODUCT_NAME Spin SP513-54N
Clevo DMI_BOARD_NAME X170KM-G
Lenovo DMI_PRODUCT_VERSION *IIL*
Florent reported the BAR allocation issue on the Clevo NL4XLU. We could
add another quirk for the NL4XLU, but I hope this generic change can solve
it for many machines without having to add quirks.
This change has been tested on Clevo X170KM-G (Konrad) and Lenovo Ideapad
Slim 3 (Matt) and solves the problem even when overriding the existing
quirks by booting with "pci=use_e820".
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216565 Clevo NL4XLU
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459#c78 Clevo X170KM-G
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Ideapad Slim 3
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2029207 X1 Carbon
Link: https://lore.kernel.org/r/20221208190341.1560157-2-helgaas@kernel.org
Reported-by: Florent DELAHAYE <kernelorg@undead.fr>
Tested-by: Konrad J Hambrick <kjhambrick@gmail.com>
Tested-by: Matt Hansen <2lprbe78@duck.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Previously portdrv allowed the AER service for any device with an AER
capability (assuming Linux had control of AER) even though the AER service
driver only attaches to Root Port and RCECs.
Because get_port_device_capability() included AER for non-RP, non-RCEC
devices, we tried to initialize the AER IRQ even though these devices
don't generate AER interrupts.
Intel DG1 and DG2 discrete graphics cards contain a switch leading to a
GPU. The switch supports AER but not MSI, so initializing an AER IRQ
failed, and portdrv failed to claim the switch port at all. The GPU itself
could be suspended, but the switch could not be put in a low-power state
because it had no driver.
Don't allow the AER service on non-Root Port, non-Root Complex Event
Collector devices. This means we won't enable Bus Mastering if the device
doesn't require MSI, the AER service will not appear in sysfs, and the AER
service driver will not bind to the device.
Link: https://lore.kernel.org/r/20221207084105.84947-1-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20221210002922.1749403-1-helgaas@kernel.org
Based-on-patch-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
There were 97 warnings produced by NFS. For example:
fs/nfsd/nfs4xdr.c:2228:17: warning: cast from '__be32 (*)(struct nfsd4_compoundargs *, struct nfsd4_access *)' (aka 'unsigned int (*)(struct nfsd4_compoundargs *, struct nfsd4_access *)') to 'nfsd4_dec' (aka 'unsigned int (*)(struct nfsd4_compoundargs *, void *)') converts to incompatible function type [-Wcast-function-type-strict]
[OP_ACCESS] = (nfsd4_dec)nfsd4_decode_access,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The enc/dec callbacks were defined as passing "void *" as the second
argument, but were being implicitly cast to a new type. Replace the
argument with union nfsd4_op_u, and perform explicit member selection
in the function body. There are no resulting binary differences.
Changes were made mechanically using the following Coccinelle script,
with minor by-hand fixes for members that didn't already match their
existing argument name:
@find@
identifier func;
type T, opsT;
identifier ops, N;
@@
opsT ops[] = {
[N] = (T) func,
};
@already_void@
identifier find.func;
identifier name;
@@
func(...,
-void
+union nfsd4_op_u
*name)
{
...
}
@proto depends on !already_void@
identifier find.func;
type T;
identifier name;
position p;
@@
func@p(...,
T name
) {
...
}
@script:python get_member@
type_name << proto.T;
member;
@@
coccinelle.member = cocci.make_ident(type_name.split("_", 1)[1].split(' ',1)[0])
@convert@
identifier find.func;
type proto.T;
identifier proto.name;
position proto.p;
identifier get_member.member;
@@
func@p(...,
- T name
+ union nfsd4_op_u *u
) {
+ T name = &u->member;
...
}
@cast@
identifier find.func;
type T, opsT;
identifier ops, N;
@@
opsT ops[] = {
[N] =
- (T)
func,
};
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If a zero length is passed to kmalloc() it returns 0x10, which is
not a valid address. gss_verify_mic() subsequently crashes when it
attempts to dereference that pointer.
Instead of allocating this memory on every call based on an
untrusted size value, use a piece of dynamically-allocated scratch
memory that is always available.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Clean up: Simplify the tracepoint's only call site.
Also, I noticed that when svc_authenticate() returns SVC_COMPLETE,
it leaves rq_auth_stat set to an error value. That doesn't need to
be recorded in the trace log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Clean up: NFSv2 has the only two usages of rpc_drop_reply in the
NFSD code base. Since NFSv2 is going away at some point, replace
these in order to simplify the "drop this reply?" check in
nfsd_dispatch().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Make it more evident how xdr_write_pages() updates the tail buffer
by using the convention of naming the iov pointer variable "tail".
I spent more than a couple of hours chasing through code to
understand this, so someone is likely to find this useful later.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Add tracepoints to trace start and end of CB_RECALL_ANY operation.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
[ cel: added show_rca_mask() macro ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The delegation reaper is called by nfsd memory shrinker's on
the 'count' callback. It scans the client list and sends the
courtesy CB_RECALL_ANY to the clients that hold delegations.
To avoid flooding the clients with CB_RECALL_ANY requests, the
delegation reaper sends only one CB_RECALL_ANY request to each
client per 5 seconds.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
[ cel: moved definition of RCA4_TYPE_MASK_RDATA_DLG ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactoring courtesy_client_reaper to generic low memory
shrinker so it can be used for other purposes.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Steven Rostedt says:
> The include/trace/events/ directory should only hold files that
> are to create events, not headers that hold helper functions.
>
> Can you please move them out of include/trace/events/ as that
> directory is "special" in the creation of events.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
_nfsd_copy_file_range() calls vfs_fsync_range() with an offset and
count (bytes written), but the former wants the start and end bytes
of the range to sync. Fix it up.
Fixes: eac0b17a77 ("NFSD add vfs_fsync after async copy is done")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We currently do a lock_to_openmode call based on the arguments from the
NLM_UNLOCK call, but that will always set the fl_type of the lock to
F_UNLCK, and the O_RDONLY descriptor is always chosen.
Fix it to use the file_lock from the block instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Shared locks are set on O_RDONLY descriptors and exclusive locks are set
on O_WRONLY ones. nlmsvc_unlock however calls vfs_lock_file twice, once
for each descriptor, but it doesn't reset fl_file. Ensure that it does.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use struct_size() helper to simplify the code, no functional changes.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the addition of POSIX ACLs to struct nfsd_attrs, we no longer
return an error if setting the ACL fails. Ensure we return the na_aclerr
error on SETATTR if there is one.
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Cc: Neil Brown <neilb@suse.de>
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
vfs_lock_file() expects the struct file_lock to be fully initialised by
the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field
is NULL.
Fixes: aec158242b ("lockd: set fl_owner when unlocking files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216582
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The svc_ungetu32 function is not used, you could remove it.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We don't really care whether there are hashed entries when it comes to
scheduling the laundrette. They might all be non-gc entries, after all.
We only want to schedule it if there are entries on the LRU.
Switch to using list_lru_count, and move the check into
nfsd_file_gc_worker. The other callsite in nfsd_file_put doesn't need to
count entries, since it only schedules the laundrette after adding an
entry to the LRU.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RZ/G2L has separate IRQ lines for tx and error interrupt for each
channel whereas R-Car has a combined IRQ line for all the channel
specific tx and error interrupts.
Add multi_channel_irqs to struct rcar_canfd_hw_info to select the
driver to choose between combined and separate irq registration for
channel interrupts. This patch also removes enum rcanfd_chip_id and
chip_id from both struct rcar_canfd_hw_info, as it is unused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221027082158.95895-6-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
R-Car has a clock divider for CAN FD clock within the IP, whereas
it is not available on RZ/G2L.
Add postdiv variable to struct rcar_canfd_hw_info to take care of this
difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221027082158.95895-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
RZ/G2L has separate IRQ lines for receive FIFO and global error interrupt
whereas R-Car has shared IRQ line.
Add shared_global_irqs to struct rcar_canfd_hw_info to select the driver to
choose between shared and separate irq registration for global
interrupts.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221027082158.95895-4-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
R-Car V3U supports a maximum of 8 channels whereas rest of the SoCs
support 2 channels.
Add max_channels variable to struct rcar_canfd_hw_info to handle this
difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221027082158.95895-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
