Refer to description of BPF_XOR, dst_reg should be used but not src_reg
in the examples.
Fixes: be3193cded ("bpf, docs: Add subsections for ALU and JMP instructions")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221129134558.2757043-1-zhengyejian1@huawei.com
Now that all clocks have individual names, remove the names of SoCs from
the RPMH clock definitions. Replace it with the common clk_rpmh_ prefix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-9-dmitry.baryshkov@linaro.org
RPMH VRM clocks are frequently shared between several platforms. It
makes little sense to encode the SoC name into the clock name, if the
same clock is used for other SoCs.
Rework the VRM clock definitions to add resource-specific suffix. Keep
the userspace-visible clock name, but encode the part of cmd resource
and the divider into the variable name. This also make it obvious which
variant is used, making the code less error-prone.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-8-dmitry.baryshkov@linaro.org
RPMH ARC clocks are frequently shared between several platforms. It
makes little sense to encode the SoC name into the clock name, if the
same clock is used for other SoCs.
Rework the ARC clock definitions to remove the SoC name. Keep the
userspace-visible clock name, but encode the divider into the variable
name. This also makes it obvious which divider is used by the platform,
making the code less error-prone.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-7-dmitry.baryshkov@linaro.org
Both ARC and VRM clocks have minor differences between platforms.
However using SoC names directly results in duplication, confusion and
occasional errors. Next patches are going to drop the SoC names and
encode these differences into the clock names.
To keep the system clock names (visible to userspace) intact, add
separate symbol names that are used in the code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-6-dmitry.baryshkov@linaro.org
There are no platform-specific parts in the BCM clocks, drop the
platform name from the clock definitions, replacing it with clk_rpmh to
have the common prefix.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-5-dmitry.baryshkov@linaro.org
In preparation for the further cleanup, remove the active only names,
they can be easily generated from the standard ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-4-dmitry.baryshkov@linaro.org
After the grouping it is obvious that some of the clock definitions are
pure duplicates. Rename them to use a single common name for the clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-3-dmitry.baryshkov@linaro.org
In preparations to the further changes, group all RPMH clock definitions
to ease review. Group the clocks by their type to make similar/duplicate
clocks stand out.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-2-dmitry.baryshkov@linaro.org
A single clock definition can be used on different platforms. Thus the
platform part of the clock name is not correct (and can be misleading).
Remove the platform-specific part of the defined clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-5-dmitry.baryshkov@linaro.org
Drop the _clk suffix from other clocks too. This does not produce any
user-visible changes, just syntax sugar.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-4-dmitry.baryshkov@linaro.org
To simplify code reviews remove duplication between normal and
active-only clock names. Get a single clock name and generate both names
internally.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-3-dmitry.baryshkov@linaro.org
The RPM_FIXED and RPM_XO_BUFFER clocks do not have the active-only
counterparts. Drop corresponding unused arguments.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-2-dmitry.baryshkov@linaro.org
Fix following warning at three places:
Function parameter or member 'ii_dev' not described.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
die_id is an u16 quantity. On single-die systems the default value of
die_id is 0. No need to check for negative values.
Plus, removing this check makes Coverity happy.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A crash happens when running the traffic with multiple clients:
Crash Signature : Unable to handle kernel paging request at
virtual address ffffffd700970918 During the crash, PC points to
"ieee80211_tx_rate_update+0x30/0x68 [mac80211]"
LR points to "ath11k_dp_htt_htc_t2h_msg_handler+0x5a8/0x8a0 [ath11k]".
Struct ppdu_stats_info is allocated and accessed from event callback via copy
engine tasklet, this has a problem when freeing it from ath11k_mac_op_stop().
Use data_lock during entire ath11k_dp_htt_get_ppdu_desc() call to protect
struct htt_ppdu_stats_info access and to avoid race condition when accessing it
from ath11k_mac_op_stop().
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221124071104.22506-1-quic_kathirve@quicinc.com
- Several DT fixes and code reorganization around opp-microvolt-<named>
DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns prop in DT example (Serge Semin).
-----BEGIN PGP SIGNATURE-----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=Cu0W
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 6.2 from Viresh Kumar:
"- Several DT fixes and code reorganization around opp-microvolt-<named>
DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns prop in DT example (Serge Semin)."
* tag 'opp-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp-v2: Fix clock-latency-ns prop in example
OPP: decouple dt properties in opp_parse_supplies()
OPP: Simplify opp_parse_supplies() by restructuring it
OPP: Parse named opp-microwatt property too
dt-bindings: opp: Fix named microwatt property
dt-bindings: opp: Fix usage of current in microwatt property
Way back in 2016 in commit 5a8b187c61 ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon". 5
years seems long enough to have it stick around after that, so finally
remove the thing now.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add missing kernel-doc for the 'filter_count' field in struct seccomp.
seccomp.h:40: warning: Function parameter or member 'filter_count' not described in 'seccomp'
Fixes: c818c03b66 ("seccomp: Report number of loaded filters in /proc/$pid/status")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221202073953.14677-1-rdunlap@infradead.org
In the "mode_filter_without_nnp" test in seccomp_bpf, there is currently
a TODO which asks to check the capability CAP_SYS_ADMIN instead of euid.
This patch adds support to check if the calling process has the flag
CAP_SYS_ADMIN, and also if this flag has CAP_EFFECTIVE set.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220731092529.28760-1-gautammenghani201@gmail.com
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes: 8aa5e56eeb ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a battery hook is added to a battery, userspace software
is not informed that the available properties of the battery
might have changed. This for example causes upower to react
slowly if a new battery hook is added during runtime.
Fix this by calling power_supply_changed() if a battery hook
was successfully added/removed.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the PG_arch_1 we keep track if the page's data cache is clean,
architecture rely on this property to treat new pages as dirty with
respect to the data cache and perform the flushing before mapping the pages
into userspace.
This patch adds a new architecture hook, arch_clear_hugepage_flags,so that
architectures which rely on the page flags being in a particular state for
fresh allocations can adjust the flags accordingly when a page is freed
into the pool.
Fixes: 9e953cda5c ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20221024094725.3054311-3-tongtiangen@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which
ships with Android x86 as factory OS. The Android x86 kernel fork ignores
I2C devices described in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to
the acpi_quirk_skip_dmi_ids table to woraround this.
ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[],
so that PMICs and Audio codecs will still be enumerated properly.
The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID
for this PMIC to the i2c_acpi_known_good_ids[] list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
unbind_rdev_from_array is only called from md_kick_rdev_from_array, so
merge it into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
md_kick_rdev_from_array is only used in md.c, so unexport it and mark
the symbol static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
These wrappers for blkdev_get / blkdev_put just horribly confuse the
code with their odd naming. Remove them and improve the error unwinding
in md_import_device with the now folded code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
This file does not use rcu, so there is no point in including
<linux/rculist.h>.
So just remove it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull Xen-for-KVM changes from David Woodhouse:
* add support for 32-bit guests in SCHEDOP_poll
* the rest of the gfn-to-pfn cache API cleanup
"I still haven't reinstated the last of those patches to make gpc->len
immutable."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.80000021H:EAX[bit 9] indicates that the SMM_CTL MSR (0xc0010116) is
not supported. This defeature can be advertised by KVM_GET_SUPPORTED_CPUID
regardless of whether or not the host enumerates it; currently it will be
included only if the host enumerates at least leaf 8000001DH, due to a
preexisting bug in QEMU that KVM has to work around (commit f751d8eac1,
"KVM: x86: work around QEMU issue with synthetic CPUID leaves", 2022-04-29).
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221007221644.138355-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add Raptor Lake-S support to the intel_tcc_cooling driver (Zhang
Rui).
- Make the intel_tcc_cooling driver detect TCC locking (Zhang Rui).
- Address Coverity warning in intel_hfi_process_event() (Ricardo Neri).
- Prevent accidental clearing of HFI in the package thermal interrupt
status (Srinivas Pandruvada).
- Protect the clearing of status bits in MSR_IA32_PACKAGE_THERM_STATUS
and MSR_IA32_THERM_STATUS (Srinivas Pandruvada).
- Allow the HFI interrupt handler to ACK an event for the same
timestamp (Srinivas Pandruvada).
* thermal-intel:
thermal: intel: hfi: ACK HFI for the same timestamp
thermal: intel: Protect clearing of thermal status bits
thermal: intel: Prevent accidental clearing of HFI status
thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S
thermal: intel: intel_tcc_cooling: Detect TCC lock bit
thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages
Several symbols are not used by vendor modules but still exported.
Removing them ensures that new coupling between kvm.ko and kvm-*.ko
is noticed and reviewed.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here are two fixes for a division-by-zero issue in the Fintek drivers.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCY4o6DgAKCRALxc3C7H1l
CCyHAP9lHJ4myiSTwFlVMrSHMOGI0xGi59uUfyfx6koQWwJDawEA6C4gMYw770LA
IGiUEKcXfiDLt21bIQ8Aq9KsHxJ3wAQ=
=XU8Z
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.1-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial fixes for 6.1-rc8
Here are two fixes for a division-by-zero issue in the Fintek drivers.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.1-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: f81534: fix division by zero on line-speed change
USB: serial: f81232: fix division by zero on line-speed change
Add CONFIG_SERIAL_8250_DW=y, which is a necessary option for
StarFive JH7110 and JH7100 SoCs to boot with serial ports.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221118011714.70877-9-hal.feng@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Nathan noticed that when HWSPINLOCK is disabled there's a Kconfig warning:
WARNING: unmet direct dependencies detected for QCOM_SMEM
Depends on [n]: (ARCH_QCOM [=y] || COMPILE_TEST [=n]) && HWSPINLOCK [=n]
Selected by [m]:
- ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])
The problem here is that QCOM_SMEM depends on HWSPINLOCK so we cannot select
QCOM_SMEM and instead we neeed to use 'depends on'.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/Y4YsyaIW+CPdHWv3@dev-arch.thelio-3990X/
Fixes: 4d79f6f34b ("wifi: ath10k: Store WLAN firmware version in SMEM image table")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202103027.25974-1-kvalo@kernel.org
There is a spelling mistake in some help text. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20221201091354.1613652-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert {clear,set}_bit() to atomics as KVM's ucall implementation relies
on clear_bit() being atomic, they are defined in atomic.h, and the same
helpers in the kernel proper are atomic.
KVM's ucall infrastructure is the only user of clear_bit() in tools/, and
there are no true set_bit() users. tools/testing/nvdimm/ does make heavy
use of set_bit(), but that code builds into a kernel module of sorts, i.e.
pulls in all of the kernel's header and so is already getting the kernel's
atomic set_bit().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "atomic_" prefix from tools' atomic_test_and_set_bit() to
match the kernel nomenclature where test_and_set_bit() is atomic,
and __test_and_set_bit() provides the non-atomic variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop tools' non-atomic test_and_set_bit() and test_and_clear_bit() helpers
now that all users are gone. The names will be claimed in the future for
atomic versions.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
Leave the usage in ucall_free() as-is, it's the one place in tools/ that
actually wants/needs atomic behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20221119013450.2643007-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take @bit as an unsigned long instead of a signed int in clear_bit() and
set_bit() so that they match the double-underscore versions, __clear_bit()
and __set_bit(). This will allow converting users that really don't want
atomic operations to the double-underscores without introducing a
functional change, which will in turn allow making {clear,set}_bit()
atomic (as advertised).
Practically speaking, this _should_ have no functional impact. KVM's
selftests usage is either hardcoded (Hyper-V tests) or is artificially
limited (arch_timer test and dirty_log test). In KVM, dirty_log test is
the only mildly interesting case as it's use indirectly restricted to
unsigned 32-bit values, but in theory it could generate a negative value
when cast to a signed int. But in that case, taking an "unsigned long"
is actually a bug fix.
Perf's usage is more difficult to audit, but any code that is affected
by the switch is likely already broken. perf_header__{set,clear}_feat()
and perf_file_header__read() effectively use only hardcoded enums with
small, positive values, atom_new() passes an unsigned long, but its value
is capped at 128 via NR_ATOM_PER_PAGE, etc...
The only real potential for breakage is in the perf flows that take a
"cpu", but it's unlikely perf is subtly relying on a negative index into
bitmaps, e.g. "cpu" can be "-1", but only as "not valid" placeholder.
Note, tools/testing/nvdimm/ makes heavy use of set_bit(), but that code
builds into a kernel module of sorts, i.e. pulls in all of the kernel's
header and so is getting the kernel's atomic set_bit(). The NVDIMM test
usage of atomics is likely unnecessary, e.g. ndtest_dimm_register() sets
bits in a local variable, but that's neither here nor there as far as
this change is concerned.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ucall hook, GUEST_UCALL_NONE(), to allow tests to make ucalls
without allocating a ucall struct, and use it to enable single-step
in ARM's debug-exceptions test. Like the disable single-step path, the
enabling path also needs to ensure that no exclusive access sequences are
attempted after enabling single-step, as the exclusive monitor is cleared
on ERET from the debug exception taken to EL2.
The test currently "works" because clear_bit() isn't actually an atomic
operation... yet.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clarify the existing documentation about how KVM_CAP_HALT_POLL and
halt_poll_ns interact to make it clear that VMs using KVM_CAP_HALT_POLL
ignore halt_poll_ns.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221201195249.3369720-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move halt-polling.rst into the common KVM documentation directory and
out of the x86-specific directory. Halt-polling is a common feature and
the existing documentation is already written as such.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221201195249.3369720-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
