The CIR (infrared receiver) controller in the Allwinner F1C100s series
of SoCs is compatible to the ones used in other Allwinner SoCs.
Add the DT node describing the resources of the controller.
There are multiple possible pinmuxes, but none as them seem to be an
obvious choice, so refrain from adding any pincontroller subnodes for
now.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-7-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The CIR controller in the Allwinner F1C100s series of SoCs is compatible
to the ones used in other Allwinner SoCs.
Add the respective compatible name to the existing IR binding, and pair
it with the A31 fallback compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221107005433.11079-6-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner F1C100s series of SoCs contain three I2C controllers
compatible to the ones used in other Allwinner SoCs.
Add the DT nodes describing the resources of the controllers.
At least one board connects an on-board I2C chip to PD0/PD12 (I2C0), so
include those pins already, to simplify referencing them later.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Highlights:
- Surface Pro 9 and Surface Laptop 5 kbd, battery, etc. support
(this is just a few hw-id additions)
- A couple of other hw-id / DMI-quirk additions
- A few small bug fixes + 1 build fix
The following is an automated git shortlog grouped by driver:
acer-wmi:
- Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
asus-wmi:
- add missing pci_dev_put() in asus_wmi_set_xusb2pr()
hp-wmi:
- Ignore Smart Experience App event
ideapad-laptop:
- Add module parameters to match DMI quirk tables
- Fix interrupt storm on fn-lock toggle on some Yoga laptops
platform/surface:
- aggregator_registry: Add support for Surface Laptop 5
- aggregator_registry: Add support for Surface Pro 9
- aggregator: Do not check for repeated unsequenced packets
platform/x86/amd:
- pmc: Add new ACPI ID AMDI0009
- pmc: Remove more CONFIG_DEBUG_FS checks
platform/x86/intel:
- pmc: Don't unconditionally attach Intel PMC when virtualized
thinkpad_acpi:
- Enable s2idle quirk for 21A1 machine type
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmN0vq4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yRQQgAmget34TuVhzBTUmXLxwSGbgcjbSb
GN6ir81p6R0XJ4/lHT3xKmfU3KXOd3CxGcIXAnyhmFKQxcwUAlWmzvQQja9Gz5oR
7eg45Hd10Hi4iswlIvSDejYToQRPcE5POW4FbHsYvqh8jWaYuDSlw0KekLwDZWnQ
leRtM+YzYCt3jDaOeFYfb4NtAU9lDzALeCA2myqXLfS5X1X+fKwsbsM0vZS5T/C5
YF/fdSqpHXssVRsggPTrNeHhOb3v9M5UjVt8apqR5D+4cmQxnMizpF/rYmI7P3fZ
OJCwv/3XvN6RecSMS5LK4/4fOvCM57/W8oO3YEmc6xNR4/em34Sm5dTgRg==
=iPTF
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
is just a few hw-id additions)
- A couple of other hw-id / DMI-quirk additions
- A few small bug fixes + 1 build fix
* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
platform/x86: hp-wmi: Ignore Smart Experience App event
platform/surface: aggregator_registry: Add support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Pro 9
platform/surface: aggregator: Do not check for repeated unsequenced packets
platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
platform/x86/amd: pmc: Add new ACPI ID AMDI0009
platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks
The Allwinner F1C100s family of SoCs contain a PWM controller compatible
to the one used in the A20 chip.
Add the DT node so that any users can simply enable it in their board
DT.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The PWM controller in the Allwinner F1C100s series of SoCs is the same
as in the A20 SoCs, so allow using that as the fallback name.
Join the V3s compatible string in an enum on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221107005433.11079-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups. In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any. This now requires trying to wake up from every queue.
Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function. In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead. This ensures we only update
it once, at the end.
Fixes: 4f8126bb23 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation. Return the number of woken
exclusive waiters from __wake_up() to facilitate that.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a queue is awaken, the wake_index written by sbq_wake_ptr currently
keeps pointing to the same queue. On the next wake up, it will thus
retry the same queue, which is unfair to other queues, and can lead to
starvation. This patch, moves the index update to happen before the
queue is returned, such that it will now try a different queue first on
the next wake up, improving fairness.
Fixes: 4f8126bb23 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the block device code should switch to implementing
->writepages instead of ->writepage eventually, the current
implementation is entirely pointless as it does the same looping over
->writepage as the generic code if no ->writepages is present.
Remove blkdev_writepages so that we can eventually unexport
generic_writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221116132035.2192924-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Hantro G2 video decoder block sits behind the IOMMU. Without a
reference for the system to properly configure the IOMMU, it will fault
and cause the video decoder to fail.
Add a proper reference to the IOMMU port. The master ID is taken from
the IOMMU fault error message on Linux, and the number seems to match
the order in the user manual's IOMMU diagram.
Fixes: 0baddea60e ("arm64: dts: allwinner: h6: Add Hantro G2 node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221115090644.3602573-3-wenst@chromium.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Hantro G2 video decoder block sits behind an IOMMU. The device tree
binding needs a property to reference it. Without a reference for the
implementation to properly configure the IOMMU, it will fault and cause
the video decoder to fail.
Add an "iommus" property for referring to the IOMMU port. The master ID
in the example is taken from the IOMMU fault error message on Linux,
and the number seems to match the order in the user manual's IOMMU
diagram.
Fixes: fd6be12716 ("media: dt-bindings: allwinner: document H6 Hantro G2 binding")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115090644.3602573-2-wenst@chromium.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
When communicating with a PMIC during system poweroff (pm_power_off()),
IRQs are disabled and we are in a RCU read-side critical section, so we
cannot use wait_for_completion_io_timeout(). Instead, poll the status
register for transfer completion.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221114015749.28490-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Shutting down the RSB controller prevents communicating with a PMIC
inside pm_power_off(), since that gets called after device_shutdown(),
so it breaks system poweroff on some boards.
Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Fixes: 843107498f ("bus: sunxi-rsb: Implement suspend/resume/shutdown callbacks")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114015749.28490-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
If the returning value of SMB2_set_info_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0967e54579 ("cifs: use a compound for setting an xattr")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Create a -r argument to specify a random seed. If no argument is
provided, the seed defaults to 1. The random seed is set with
perf_test_set_random_seed() and must be set before guest_code runs to
apply.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-3-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Implement random number generator for guest code to randomize parts
of the test, making it less predictable and a more accurate reflection
of reality.
The random number generator chosen is the Park-Miller Linear
Congruential Generator, a fancy name for a basic and well-understood
random number generator entirely sufficient for this purpose.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-2-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/YuhPT2drgqL+osLl@google.com/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-8-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.
Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Change test args memslot_modification_delay and nr_memslot_modifications
to delay and nr_iterations for simplicity.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-6-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace size_1gb defined in max_guest_memory_test.c with the SZ_1G,
SZ_2G and SZ_4G from linux/sizes.h header file.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-5-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
atoi() doesn't detect errors. There is no way to know that a 0 return
is correct conversion or due to an error.
Introduce atoi_paranoid() to detect errors and provide correct
conversion. Replace all atoi() calls with atoi_paranoid().
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-4-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There are 13 command line options and they are not in any order. Put
them in alphabetical order to make it easy to add new options.
No functional change intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-3-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Passing -e option (Run VCPUs while dirty logging is being disabled) in
dirty_log_perf_test also unintentionally enables -g (Do not enable
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2). Add break between two switch case
logic.
Fixes: cfe12e64b0 ("KVM: selftests: Add an option to run vCPUs while disabling dirty logging")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-2-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Previously, we only used PXP FW interface version-42 structures for
PXP arbitration session on ADL/TGL products and version-43 for HuC
authentication on DG2. That worked fine despite not differentiating such
versioning of the PXP firmware interaction structures. This was okay
back then because the only commands used via version 42 was not
used via version 43 and vice versa.
With MTL, we'll need both these versions side by side for the same
commands (PXP-session) with the older platform feature support. That
said, let's create separate files to define the structures and definitions
for both version-42 and 43 of PXP FW interfaces.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108045628.4187260-2-alan.previn.teres.alexis@intel.com
The input parameter @fields is type of struct ima_template_field ***, so
when allocates array memory for @fields, the size of element should be
sizeof(**field) instead of sizeof(*field).
Actually the original code would not cause any runtime error, but it's
better to make it logically right.
Fixes: adf53a778a ("ima: new templates management mechanism")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Key restriction is allocated in integrity_init_keyring(). However, if
keyring allocation failed, it is not freed, causing memory leaks.
Fixes: 2b6aa412ff ("KEYS: Use structure to capture key restriction function and data")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever
currently it's only limited to iopoll. Instead of guarding the list with
irq toggling on alloc, which is expensive, it keeps an additional
irq-safe list from which bios are spliced in batches to ammortise
overhead. On the put side it toggles irqs, but in many cases they're
already disabled and so cheap.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c2306de96b900ab9264f4428ec37768ddcf0da36.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Biosets keep a mempool, so as long as requests complete we can always
can allocate and have forward progress. Percpu bio caches break that
assumptions as we may complete into the cache of one CPU and after try
and fail to allocate with another CPU. We also can't grab from another
CPU's cache without tricky sync.
If we're allocating with a bio while the mempool is undersaturated,
remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool.
It might try to free into mempool more requests than required, but
assuming than there is no memory starvation in the system it'll
stabilise and never hit that path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa150caf9c263fa92269e86d7826cc8fa65f38de.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a helper mempool_is_saturated(), which tells if the mempool is
under-filled or not. We need it to figure out whether it should be
freed right into the mempool or could be cached with top level caches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/636aed30be8c35d78f45e244998bc6209283cccc.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add LARA-L6 PIDs for three different USB compositions.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In default mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
[ johan: drop PID defines in favour of comments ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not
implement a QMI interface on port 4, the reservation (RSVD(4)) has been
added to meet other companies that implement QMI on that interface.
LARA-R6 00B USB composition exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final
product uses a new USB composition with different PID. 0x90fa PID used
only by LARA-R6 internal prototypes.
Move 0x90fa PID directly in the option_ids array since used by other
Qualcomm based modem vendors as pointed out in:
https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before amd_probe() returns. There is no problem for the 'smbus_dev ==
NULL' branch because pci_dev_put() can also handle the NULL input
parameter case.
Fixes: 659c9bc114 ("mmc: sdhci-pci: Build o2micro support in the same module")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the internal header file in the C file. Fix a transitive dependency in
openat-syscall.c broken by the clean up.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hashmap.h comes from libbpf but isn't installed with its
headers. Always use the header file of the code in util. Change the
hashmap.h dependency in expr.h to a forward declaration, add the
necessary header file includes in the C files.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build currently has a '-Itools/lib' on the CC command
line. This causes issues as the libapi, libsubcmd, libtraceevent,
libbpf and libsymbol headers are all found via this path, making it
impossible to override include behavior.
Change the libsymbol build mirroring the libbpf, libsubcmd, libapi,
libperf and libtraceevent build, so that it is installed in a directory
along with its headers.
A later change will modify the include behavior. Don't build kallsyms.o
as part of util as this will lead to duplicate definitions. Add
kallsym's directory to the MANIFEST rather than individual files, so
that the Build and Makefile are added to a source tar ball.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sufficient Makefile for libsymbol to be built as a dependency and
header files installed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Headers necessary for the perf build. Note, internal headers are also
installed as these are necessary for the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build currently has a '-Itools/lib' on the CC command
line. This causes issues as the libapi, libsubcmd, libtraceevent,
libbpf headers are all found via this path, making it impossible to
override include behavior.
Change the libtraceevent build mirroring the libbpf, libsubcmd, libapi
and libperf build, so that it is installed in a directory along with its
headers. A later change will modify the include behavior.
Similarly, the plugins are now installed into libtraceevent_plugins
except they have no header files.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build currently has a '-Itools/lib' on the CC command
line. This causes issues as the libapi, libsubcmd, libtraceevent,
libbpf headers are all found via this path, making it impossible to
override include behavior.
Change the libperf build mirroring the libbpf, libsubcmd and libapi
build, so that it is installed in a directory along with its headers. A
later change will modify the include behavior.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build currently has a '-Itools/lib' on the CC command line.
This causes issues as the libapi, libsubcmd, libtraceevent, libbpf
headers are all found via this path, making it impossible to override
include behavior.
Change the libapi build mirroring the libbpf and libsubcmd build, so
that it is installed in a directory along with its headers. A later
change will modify the include behavior.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
