Nothing in these files needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: oss-drivers@corigine.com
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing in these file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold
a reference on a resource - the KVDL entry where the IPv6 underlay
destination IP is stored. For that, the driver maintains two hash tables:
1. Maps IPv6 to KVDL index
2. Maps {MAC, FID index} to IPv6 address
When a FDB entry is removed, the second table is used to find the relevant
IPv6 address and the first table is used to remove the reference count and
free the index if is not used anymore.
In order for a packet to be forwarded to a single remote VTEP, FDB
entries need to be configured at both the bridge and VXLAN devices' FDB
tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry
in the hardware. Therefore, in case one entry is removed, the entry will
be removed from the hardware and the remaining entry will be unmarked
with 'offload' flag since it is not offloaded anymore.
For example, the two FDB entries should be added to allow packets to be
forwarded via vx10:
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10
When one entry will be removed, the second one will not be offloaded
anymore. When the first entry (in VXLAN FDB) will be removed / will not be
offloaded anymore, the two mappings in IPv6 hash tables will be removed.
In case that the second entry is removed before the first one, unexpected
warnings[1][2] will be shown in user space as a result of removing the
first entry. The issue is that not offloaded entry is removed, the driver
tries to search the relevant entries in the hash tables, does not find them
and therefore warns.
Do not handle removing of not offloaded VXLAN FDB entries, as they were
already removed when the offload flag was removed.
[1]:
WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Call Trace:
<TASK>
mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
[2]:
WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Call Trace:
<TASK>
? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum]
mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 0860c76416 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If CONFIG_PTP_1588_CLOCK_OPTIONAL=m and CONFIG_RENESAS_ETHER_SWITCH=y,
the following build error happened:
aarch64-linux-ld: DWARF error: could not find abbrev number 60
drivers/net/ethernet/renesas/rswitch.o: in function `rswitch_get_ts_info':
rswitch.c:(.text+0x408): undefined reference to `ptp_clock_index'
aarch64-linux-ld: DWARF error: could not find abbrev number 1190123
drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_register':
rcar_gen4_ptp.c:(.text+0x4dc): undefined reference to `ptp_clock_register'
aarch64-linux-ld: drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_unregister':
rcar_gen4_ptp.c:(.text+0x584): undefined reference to `ptp_clock_unregister'
To fix the issue, add "depends on PTP_1588_CLOCK_OPTIONAL" into the
Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 6c6fa1a00a ("net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221110012720.3552060-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
msg2138 only supports 2 fingers presses, and needs different processing
since second finger press is encoded as a delta position wrt. first one
and the packet/touch_event structs are not the same as msg2638.
Add support for it by implementing distinct structs and irq handler.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20221110171952.34207-4-vincent.knecht@mailoo.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Chester Lin <clin@suse.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If an empty buf is received, lbuf is also empty. So lbuf is
accessed by index -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f31a2de3fe ("HID: hid-lg4ff: Allow switching of Logitech gaming wheels between compatibility modes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same
ITE controller setup as other Acer Switch 2-in-1's.
This needs special handling for the wifi on/off toggle hotkey as well as
to properly report touchpad on/off keypresses.
Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of
QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch allows users to swap the control and command keys. This can be
useful for the Mac users who are used to using Command instead of Control
in macOS for various commonly used shortcuts.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The VisionFive DT somehow never actually made it upstream, and is
largely shared with the BeagleV. Better late than never.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
\#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 &
blindly overridden by the (out of tree) driver anyway. The core can
support inverted operation, so update the entry to correctly report its
capabilities.
Fixes: 72560c6559 ("riscv: dts: microchip: add fpga fabric section to icicle kit")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If we fail to get a valid panel ID in drm_edid_get_panel_id() we'd
like to see the EDID that was read so we have a chance of
understanding what's wrong. There's already a function for that, so
let's call it in the error case.
NOTE: edid_block_read() has a retry loop in it, so actually we'll only
print the block read back from the final attempt. This still seems
better than nothing.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021130637.1.I8c2de0954a4e54e0c59a72938268e2ead91daa98@changeid
It was found that with the default hierarchy, enabling cpuset in the
child cgroups can trigger a cpuset_attach() call in each of the child
cgroups that have tasks with no change in effective cpus and mems. If
there are many processes in those child cgroups, it will burn quite a
lot of cpu cycles iterating all the tasks without doing useful work.
Optimizing this case by comparing between the old and new cpusets and
skip useless update if there is no change in effective cpus and mems.
Also mems_allowed are less likely to be changed than cpus_allowed. So
skip changing mm if there is no change in effective_mems and
CS_MEMORY_MIGRATE is not set.
By inserting some instrumentation code and running a simple command in
a container 200 times in a cgroup v2 system, it was found that all the
cpuset_attach() calls are skipped (401 times in total) as there was no
change in effective cpus and mems.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cpuset v2 has no spread flags to set. So we can skip spread
flags update if cpuset v2 is being used. Also change the name to
cpuset_update_task_spread_flags() to indicate that there are multiple
spread flags.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpuset_prs.sh is failing with the following error:
test_cpuset_prs.sh: line 29: [[: 8
57%: syntax error in expression (error token is "57%")
This is happening because `lscpu | grep "^CPU(s)"` returns two lines in
some systems (such as Debian unstable):
# lscpu | grep "^CPU(s)"
CPU(s): 8
CPU(s) scaling MHz: 55%
This is a simple fix that discard the second line.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In error label 'out1' path in ssi_probe(), the pm_runtime_enable()
has not been called yet, so pm_runtime_disable() is not needed.
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/hsi/clients/ssi_protocol.c:1053:20: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ssip_pn_xmit,
^~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ssip_pn_xmit() to
match the prototype's to resolve the warning and CFI failure.
Additionally, use the enum 'NETDEV_TX_OK' instead of a raw '0' for the
return value of ssip_pn_xmit().
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set. (Anthony DeRossi)
-----BEGIN PGP SIGNATURE-----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=xuV+
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set (Anthony DeRossi)
* tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check the device set open count on reset
vfio: Export the device set open count
vfio: Fix container device registration life cycle
If the property is set on a device without valid trimming data in the OTP
the ADC will not function correctly. Therefore, this patch drops the use
of this property to avoid this scenario.
Fixes: 2bdb2f00a8 ("dt-bindings: iio: adc: Add ast2600-adc bindings")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221114025057.10843-2-billy_tsai@aspeedtech.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dts property "aspeed,trim-data-valid" is currently used to determine
whether to read trimming data from the OTP register. If this is set on
a device without valid trimming data in the OTP the ADC will not function
correctly. This patch drops the use of this property and instead uses the
default (unprogrammed) OTP value of 0 to detect when a fallback value of
0x8 should be used rather then the value read from the OTP.
Fixes: d0a4c17b40 ("iio: adc: aspeed: Get and set trimming data.")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20221114025057.10843-1-billy_tsai@aspeedtech.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reviewing the CFMWS parsing code that deals with the HDM decoders,
I noticed a couple of magic numbers. This commit replaces these magic numbers
with constants defined by the CXL 3.0 specification.
v2:
- Change references to CXL 3.0 specification (David)
- CXL_DECODER_MAX_GRANULARITY_ORDER -> CXL_DECODER_MAX_ENCODED_IG (Dan)
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220829220249.243888-1-a.manzanares@samsung.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In cxl_acpi_probe() the iterator bus_for_each_dev() walks through all
CXL hosts. Since all dev_*() debug messages point to the ACPI0017
device which is the CXL root for all hosts, the device information is
pointless as it is always the same device. Change this to use the host
device for this instead.
Also, add additional host specific information such as CXL support,
UID and CHBCR.
This is an example log:
acpi ACPI0016:00: UID found: 4
acpi ACPI0016:00: CHBCR found: 0x28090000000
acpi ACPI0016:00: dport added to root0
acpi ACPI0016:00: host-bridge: ACPI0016:00
pci0000:7f: host supports CXL
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-6-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Placate "$VARIABLE is used uninitialized" warnings
* omap2: Add missing dependency on GPMC
* qcom: Handle ret from parse with codeword_fixup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmNyBYUACgkQJWrqGEe9
VoRoAQf/R0n6rzsehjzwRlX1c2q6tFrBE7b1SNYw7zpjr4LfV8yoym/L/YfXVh50
a4OjlPhT+3/IJcy59jztgHH2ILvZmfDEm8NpJbO1LLci+Wa9U7tQPYOHstMUOcSn
SCDsR852+Mt1bC7NrFWFOxuBKpleCrb+NujKuBERd3CeCULquFMpqZvFgNPou6UN
mVPYZFSpLH35sQcxOchkaFk+0ZZeN6R5ojhXOxpNIoYoeiJ5GevSbCgR0W5ODsHw
vePAId1iDV7jOdBFXpHeKQ8O1KcCFVO8oDpI/lB+QYksfo+p4JI8R0VsQq0qs4Uq
fpR5JCy20Uoi8yncET1LcLlKezHXGw==
=s730
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Placate "$VARIABLE is used uninitialized" warnings
- omap2: Add missing dependency on GPMC
- qcom: Handle ret from parse with codeword_fixup
* tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: omap2: add dependency on GPMC
mtd: rawnand: placate "$VARIABLE is used uninitialized" warnings
mtd: rawnand: qcom: handle ret from parse with codeword_fixup
Pull MD fixes from Song.
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: stop mdx_raid1 thread when raid1 array run failed
md/raid5: use bdev_write_cache instead of open coding it
md: fix a crash in mempool_free
md/raid0, raid10: Don't set discard sectors for request queue
md/bitmap: Fix bitmap chunk size overflow issues
md: introduce md_ro_state
md: factor out __md_set_array_info()
lib/raid6: drop RAID6_USE_EMPTY_ZERO_PAGE
raid5-cache: use try_cmpxchg in r5l_wake_reclaim
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/
Suggested-by: Nuno Sá <noname.nuno@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A driver that supports I2C_DRV_ACPI_WAIVE_D0_PROBE is not expected to
power off a device that it has not powered on previously.
For devices operating in "full_power" mode, the first call to
`i2c_acpi_waive_d0_probe` will return 0, which means that the device
will be turned on with `dev_pm_domain_attach`.
If probe fails the second call to `i2c_acpi_waive_d0_probe` will
return 1, which means that the device will not be turned off.
This is, it will be left in a different power state. Lets fix it.
Reviewed-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: b18c1ad685 ("i2c: Allow an ACPI driver to manage the device's power state during probe")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Kang Minchul says:
====================
This patch series contains various checkpatch fixes
in btf.c, libbpf.c, ringbuf.c.
I know these are trivial but some issues are hard to ignore
and I think these checkpatch issues are accumulating.
v1 -> v2: changed cover letter message.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Fixed following checkpatch issues:
WARNING: Block comments use a trailing */ on a separate line
+ * other BPF program's BTF object */
WARNING: Possible repeated word: 'be'
+ * name. This is important to be be able to find corresponding BTF
ERROR: switch and case should be at the same indent
+ switch (ext->kcfg.sz) {
+ case 1: *(__u8 *)ext_val = value; break;
+ case 2: *(__u16 *)ext_val = value; break;
+ case 4: *(__u32 *)ext_val = value; break;
+ case 8: *(__u64 *)ext_val = value; break;
+ default:
ERROR: trailing statements should be on next line
+ case 1: *(__u8 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 2: *(__u16 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 4: *(__u32 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 8: *(__u64 *)ext_val = value; break;
ERROR: code indent should use tabs where possible
+ }$
WARNING: please, no spaces at the start of a line
+ }$
WARNING: Block comments use a trailing */ on a separate line
+ * for faster search */
ERROR: code indent should use tabs where possible
+^I^I^I^I^I^I &ext->kcfg.is_signed);$
WARNING: braces {} are not necessary for single statement blocks
+ if (err) {
+ return err;
+ }
ERROR: code indent should use tabs where possible
+^I^I^I^I sizeof(*obj->btf_modules), obj->btf_module_cnt + 1);$
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221113190648.38556-3-tegongkang@gmail.com
We need to pass '*link' to final libbpf_get_error,
because that one holds the return value, not 'link'.
Fixes: 4fa5bcfe07 ("libbpf: Allow BPF program auto-attach handlers to bail out")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221114145257.882322-1-jolsa@kernel.org
It should have a comma after 'cpus' for socket and die aggregation mode.
The output of the following command shows the issue.
$ sudo perf stat -a --per-socket -x, --metric-only -I1 true
Before:
+--- here
V
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000908461,S0,8,0.950,1.65,1.21,
After:
time,socket,cpus,GHz,insn per cycle,branch-misses of all branches,
0.000683094,S0,8,0.593,2.00,0.60,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221112032244.1077370-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should not print "summary" for each event when --metric-only is set.
Before:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000709079,S0,8,0.893,2.40,0.45,
S0,8, summary, summary, summary, summary, summary,0.893, summary,2.40, summary, summary,0.45,
After:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGHz,insn per cycle,branch-misses of all branches,
0.000882297,S0,8,0.598,1.64,0.64,
summary,S0,8,0.598,1.64,0.64,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221112032244.1077370-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
blkcg_css_online is supposed to pin the blkcg of the parent, but
397c9f46ee refactored things and along the way, changed it to pin the
css instead. This results in extra pins, and we end up leaking blkcgs
and cgroups.
Fixes: 397c9f46ee ("blk-cgroup: move blkcg_{pin,unpin}_online out of line")
Signed-off-by: Chris Mason <clm@fb.com>
Spotted-by: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org> # v5.19+
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20221114181930.2093706-1-clm@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/20221018132341.76259-6-rrichter@amd.com [1]
Cc: Robert Richter <rrichter@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-5-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL ports are added in a couple of code paths using devm_cxl_add_port().
Debug messages are individually generated, but are incomplete and
inconsistent. Change this by moving its generation to
devm_cxl_add_port(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_port() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The physical base address of a CXL range can be invalid and is then
set to CXL_RESOURCE_NONE. In general software shall prevent such
situations, but it is hard to proof this may never happen. E.g. in
add_port_attach_ep() there this the following:
component_reg_phys = find_component_registers(uport_dev);
port = devm_cxl_add_port(&parent_port->dev, uport_dev,
component_reg_phys, parent_dport);
find_component_registers() and subsequent functions (e.g.
cxl_regmap_to_base()) may return CXL_RESOURCE_NONE. But it is written
to port without any further check in cxl_port_alloc():
port->component_reg_phys = component_reg_phys;
It is then later directly used in devm_cxl_setup_hdm() to map io
ranges with devm_cxl_iomap_block(). Just an example...
Check this condition. Also do not fail silently like an ioremap()
failure, use a WARN_ON_ONCE() for it.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The function devm_cxl_iomap_block() is only used in the core
code. There are two declarations in header files of it, in
drivers/cxl/core/core.h and drivers/cxl/cxl.h. Remove its unused
declaration in drivers/cxl/cxl.h.
Fixing build error in regs.c found by kernel test robot by including
"core.h" there.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221018132341.76259-2-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fix a typo in mlx5vf_cmd_load_vhca_state() to use the 'load' memory
layout.
As in/out sizes are equal for save and load commands there wasn't any
functional issue.
Fixes: f1d98f346e ("vfio/mlx5: Expose migration commands over mlx5 device")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221106174630.25909-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add an option to get migration data size by introducing a new migration
feature named VFIO_DEVICE_FEATURE_MIG_DATA_SIZE.
Upon VFIO_DEVICE_FEATURE_GET the estimated data length that will be
required to complete STOP_COPY is returned.
This option may better enable user space to consider before moving to
STOP_COPY whether it can meet the downtime SLA based on the returned
data.
The patch also includes the implementation for mlx5 and hisi for this
new option to make it feature complete for the existing drivers in this
area.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20221106174630.25909-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Don't transform the logical block size to a bit shift only to shift it
back to the original block size. Just use the size.
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add generic qcom,smmu-500 compatibility string. Newer platforms should
use this generic entry rather than declaring per-SoC entries.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-11-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The arm_mmu500_reset() writes into registers specific for MMU500. For
the generic ARM SMMU v2 these registers (sACR) are defined as
'implementation defined'. Downstream Qualcomm driver for SMMUv2 doesn't
touch them.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-10-dmitry.baryshkov@linaro.org
[will: Remove unused 'qcom_smmu_data' stucture]
Signed-off-by: Will Deacon <will@kernel.org>
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
