The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
Single) from Andes. In preparation to add support for RZ/Five SoC add
the Andes AX45MP core to the list.
More details about Andes AX45MP core can be found here:
[0] http://www.andestech.com/en/products-solutions/andescore-processors/riscv-ax45mp/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221028165921.94487-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The stage-2 map walker has been made parallel-aware, and as such can be
called while only holding the read side of the MMU lock. Rip out the
conditional locking in user_mem_abort() and instead grab the read lock.
Continue to take the write lock from other callsites to
kvm_pgtable_stage2_map().
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220033.1895655-1-oliver.upton@linux.dev
stage2_map_walker_try_leaf() and friends now handle stage-2 PTEs
generically, and perform the correct flush when a table PTE is removed.
Additionally, they've been made parallel-aware, using an atomic break
to take ownership of the PTE.
Stop clearing the PTE in the pre-order callback and instead let
stage2_map_walker_try_leaf() deal with it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220006.1895572-1-oliver.upton@linux.dev
Convert stage2_map_walker_try_leaf() to use the new break-before-make
helpers, thereby making the handler parallel-aware. As before, avoid the
break-before-make if recreating the existing mapping. Additionally,
retry execution if another vCPU thread is modifying the same PTE.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215934.1895478-1-oliver.upton@linux.dev
In order to service stage-2 faults in parallel, stage-2 table walkers
must take exclusive ownership of the PTE being worked on. An additional
requirement of the architecture is that software must perform a
'break-before-make' operation when changing the block size used for
mapping memory.
Roll these two concepts together into helpers for performing a
'break-before-make' sequence. Use a special PTE value to indicate a PTE
has been locked by a software walker. Additionally, use an atomic
compare-exchange to 'break' the PTE when the stage-2 page tables are
possibly shared with another software walker. Elide the DSB + TLBI if
the evicted PTE was invalid (and thus not subject to break-before-make).
All of the atomics do nothing for now, as the stage-2 walker isn't fully
ready to perform parallel walks.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215855.1895367-1-oliver.upton@linux.dev
Create a helper to initialize a table and directly call
smp_store_release() to install it (for now). Prepare for a subsequent
change that generalizes PTE writes with a helper.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-11-oliver.upton@linux.dev
The stage2 attr walker is already used for parallel walks. Since commit
f783ef1c0e ("KVM: arm64: Add fast path to handle permission relaxation
during dirty logging"), KVM acquires the read lock when
write-unprotecting a PTE. However, the walker only uses a simple store
to update the PTE. This is safe as the only possible race is with
hardware updates to the access flag, which is benign.
However, a subsequent change to KVM will allow more changes to the stage
2 page tables to be done in parallel. Prepare the stage 2 attribute
walker by performing atomic updates to the PTE when walking in parallel.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-10-oliver.upton@linux.dev
Use RCU to safely walk the stage-2 page tables in parallel. Acquire and
release the RCU read lock when traversing the page tables. Defer the
freeing of table memory to an RCU callback. Indirect the calls into RCU
and provide stubs for hypervisor code, as RCU is not available in such a
context.
The RCU protection doesn't amount to much at the moment, as readers are
already protected by the read-write lock (all walkers that free table
memory take the write lock). Nonetheless, a subsequent change will
futher relax the locking requirements around the stage-2 MMU, thereby
depending on RCU.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-9-oliver.upton@linux.dev
The break-before-make sequence is a bit annoying as it opens a window
wherein memory is unmapped from the guest. KVM should replace the PTE
as quickly as possible and avoid unnecessary work in between.
Presently, the stage-2 map walker tears down a removed table before
installing a block mapping when coalescing a table into a block. As the
removed table is no longer visible to hardware walkers after the
DSB+TLBI, it is possible to move the remaining cleanup to happen after
installing the new PTE.
Reshuffle the stage-2 map walker to install the new block entry in
the pre-order callback. Unwire all of the teardown logic and replace
it with a call to kvm_pgtable_stage2_free_removed() after fixing
the PTE. The post-order visitor is now completely unnecessary, so drop
it. Finally, touch up the comments to better represent the now
simplified map walker.
Note that the call to tear down the unlinked stage-2 is indirected
as a subsequent change will use an RCU callback to trigger tear down.
RCU is not available to pKVM, so there is a need to use different
implementations on pKVM and non-pKVM VMs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-8-oliver.upton@linux.dev
Use an opaque type for pteps and require visitors explicitly dereference
the pointer before using. Protecting page table memory with RCU requires
that KVM dereferences RCU-annotated pointers before using. However, RCU
is not available for use in the nVHE hypervisor and the opaque type can
be conditionally annotated with RCU for the stage-2 MMU.
Call the type a 'pteref' to avoid a naming collision with raw pteps. No
functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-7-oliver.upton@linux.dev
A subsequent change to KVM will move the tear down of an unlinked
stage-2 subtree out of the critical path of the break-before-make
sequence.
Introduce a new helper for tearing down unlinked stage-2 subtrees.
Leverage the existing stage-2 free walkers to do so, with a deep call
into __kvm_pgtable_walk() as the subtree is no longer reachable from the
root.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-6-oliver.upton@linux.dev
In order to tear down page tables from outside the context of
kvm_pgtable (such as an RCU callback), stop passing a pointer through
kvm_pgtable_walk_data.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-5-oliver.upton@linux.dev
As a prerequisite for getting visitors off of struct kvm_pgtable, pass
mm_ops through the visitor context.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-4-oliver.upton@linux.dev
Rather than reading the ptep all over the shop, read the ptep once from
__kvm_pgtable_visit() and stick it in the visitor context. Reread the
ptep after visiting a leaf in case the callback installed a new table
underneath.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-3-oliver.upton@linux.dev
Passing new arguments by value to the visitor callbacks is extremely
inflexible for stuffing new parameters used by only some of the
visitors. Use a context structure instead and pass the pointer through
to the visitor callback.
While at it, redefine the 'flags' parameter to the visitor to contain
the bit indicating the phase of the walk. Pass the entire set of flags
through the context structure such that the walker can communicate
additional state to the visitor callback.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-2-oliver.upton@linux.dev
When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix
it.
Fixes: 5e123b844a ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's been a while since the last sync and Lee needs commit 73590342fc85
("libfdt: prevent integer overflow in fdt_next_tag").
This adds the following commits from upstream:
55778a03df61 libfdt: tests: add get_next_tag_invalid_prop_len
73590342fc85 libfdt: prevent integer overflow in fdt_next_tag
035fb90d5375 libfdt: add fdt_get_property_by_offset_w helper
98a07006c48d Makefile: fix infinite recursion by dropping non-existent `%.output`
a036cc7b0c10 Makefile: limit make re-execution to avoid infinite spin
c6e92108bcd9 libdtc: remove duplicate judgments
e37c25677dc9 Don't generate erroneous fixups from reference to path
50454658f2b5 libfdt: Don't mask fdt_get_name() returned error
e64a204196c9 manual.txt: Follow README.md and remove Jon
f508c83fe6f0 Update README in MANIFEST.in and setup.py to README.md
c2ccf8a77dd2 Add description of Signed-off-by lines
90b9d9de42ca Split out information for contributors to CONTRIBUTING.md
0ee1d479b23a Remove Jon Loeliger from maintainers list
b33a73c62c1c Convert README to README.md
7ad60734b1c1 Allow static building with meson
fd9b8c96c780 Allow static building with make
fda71da26e7f libfdt: Handle failed get_name() on BEGIN_NODE
c7c7f17a83d5 Fix test script to run also on dash shell
01f23ffe1679 Add missing relref_merge test to meson test list
ed310803ea89 pylibfdt: add FdtRo.get_path()
c001fc01a43e pylibfdt: fix swig build in install
26c54f840d23 tests: add test cases for label-relative path references
ec7986e682cf dtc: introduce label relative path references
651410e54cb9 util: introduce xstrndup helper
4048aed12b81 setup.py: fix out of tree build
ff5afb96d0c0 Handle integer overflow in check_property_phandle_args()
ca7294434309 README: Explain how to add a new API function
c0c2e115f82e Fix a UB when fdt_get_string return null
cd5f69cbc0d4 tests: setprop_inplace: use xstrdup instead of unchecked strdup
a04f69025003 pylibfdt: add Property.as_*int*_array()
83102717d7c4 pylibfdt: add Property.as_stringlist()
d152126bb029 Fix Python crash on getprop deallocation
17739b7ef510 Support 'r' format for printing raw bytes with fdtget
45f3d1a095dd libfdt: overlay: make overlay_get_target() public
c19a4bafa514 libfdt: fix an incorrect integer promotion
1cc41b1c969f pylibfdt: Add packaging metadata
db72398cd437 README: Update pylibfdt install instructions
383e148b70a4 pylibfdt: fix with Python 3.10
23b56cb7e189 pylibfdt: Move setup.py to the top level
69a760747d8d pylibfdt: Split setup.py author name and email
0b106a77dbdc pylibfdt: Use setuptools_scm for the version
c691776ddb26 pylibfdt: Use setuptools instead of distutils
5216f3f1bbb7 libfdt: Add static lib to meson build
4eda2590f481 CI: Cirrus: bump used FreeBSD from 12.1 to 13.0
Link: https://lore.kernel.org/r/20221101181427.1808703-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221110144539.2989354-1-yebin@huaweicloud.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added module build support for the davinci gpio driver
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods. This would, however, result in the bogus page
addresses when IOMMU is enabled. Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.
The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback. This avoids the corner case like the above.
The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com
Link: https://lore.kernel.org/r/20221110132216.30605-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Binding requires node name to be rng not trng:
trng@1020f000: $nodename:0: 'trng@1020f000' does not match '^rng@[0-9a-f]+$'
Fixes: 50137c150f ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221027151022.5541-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In the dirty ring case, we rely on vcpu exit due to full dirty ring
state. On ARM64 system, there are 4096 host pages when the host
page size is 64KB. In this case, the vcpu never exits due to the
full dirty ring state. The similar case is 4KB page size on host
and 64KB page size on guest. The vcpu corrupts same set of host
pages, but the dirty page information isn't collected in the main
thread. This leads to infinite loop as the following log shows.
# ./dirty_log_test -M dirty-ring -c 65536 -m 5
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbffe0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
Iteration 1 collected 576 pages
<No more output afterwards>
Fix the issue by automatically choosing the best dirty ring size,
to ensure vcpu exit due to full dirty ring state. The option '-c'
becomes a hint to the dirty ring count, instead of the value of it.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-8-gshan@redhat.com
There are two states, which need to be cleared before next mode
is executed. Otherwise, we will hit failure as the following messages
indicate.
- The variable 'dirty_ring_vcpu_ring_full' shared by main and vcpu
thread. It's indicating if the vcpu exit due to full ring buffer.
The value can be carried from previous mode (VM_MODE_P40V48_4K) to
current one (VM_MODE_P40V48_64K) when VM_MODE_P40V48_16K isn't
supported.
- The current ring buffer index needs to be reset before next mode
(VM_MODE_P40V48_64K) is executed. Otherwise, the stale value is
carried from previous mode (VM_MODE_P40V48_4K).
# ./dirty_log_test -M dirty-ring
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbfffc000
:
Dirtied 995328 pages
Total bits checked: dirty (1012434), clear (7114123), track_next (966700)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
vcpu continues now.
Notifying vcpu to continue
Iteration 1 collected 0 pages
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
==== Test Assertion Failure ====
dirty_log_test.c:369: cleared == count
pid=10541 tid=10541 errno=22 - Invalid argument
1 0x0000000000403087: dirty_ring_collect_dirty_pages at dirty_log_test.c:369
2 0x0000000000402a0b: log_mode_collect_dirty_pages at dirty_log_test.c:492
3 (inlined by) run_test at dirty_log_test.c:795
4 (inlined by) run_test at dirty_log_test.c:705
5 0x0000000000403a37: for_each_guest_mode at guest_modes.c:100
6 0x0000000000401ccf: main at dirty_log_test.c:938
7 0x0000ffff9ecd279b: ?? ??:0
8 0x0000ffff9ecd286b: ?? ??:0
9 0x0000000000401def: _start at ??:?
Reset dirty pages (0) mismatch with collected (35566)
Fix the issues by clearing 'dirty_ring_vcpu_ring_full' and the ring
buffer index before next new mode is to be executed.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-7-gshan@redhat.com
In vcpu_map_dirty_ring(), the guest's page size is used to figure out
the offset in the virtual area. It works fine when we have same page
sizes on host and guest. However, it fails when the page sizes on host
and guest are different on arm64, like below error messages indicates.
# ./dirty_log_test -M dirty-ring -m 7
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
==== Test Assertion Failure ====
lib/kvm_util.c:1477: addr == MAP_FAILED
pid=9000 tid=9000 errno=0 - Success
1 0x0000000000405f5b: vcpu_map_dirty_ring at kvm_util.c:1477
2 0x0000000000402ebb: dirty_ring_collect_dirty_pages at dirty_log_test.c:349
3 0x00000000004029b3: log_mode_collect_dirty_pages at dirty_log_test.c:478
4 (inlined by) run_test at dirty_log_test.c:778
5 (inlined by) run_test at dirty_log_test.c:691
6 0x0000000000403a57: for_each_guest_mode at guest_modes.c:105
7 0x0000000000401ccf: main at dirty_log_test.c:921
8 0x0000ffffb06ec79b: ?? ??:0
9 0x0000ffffb06ec86b: ?? ??:0
10 0x0000000000401def: _start at ??:?
Dirty ring mapped private
Fix the issue by using host's page size to map the ring buffer.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-6-gshan@redhat.com
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
ARM64 needs to dirty memory outside of a VCPU context when VGIC/ITS is
enabled. It's conflicting with that ring-based dirty page tracking always
requires a running VCPU context.
Introduce a new flavor of dirty ring that requires the use of both VCPU
dirty rings and a dirty bitmap. The expectation is that for non-VCPU
sources of dirty memory (such as the VGIC/ITS on arm64), KVM writes to
the dirty bitmap. Userspace should scan the dirty bitmap before migrating
the VM to the target.
Use an additional capability to advertise this behavior. The newly added
capability (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) can't be enabled before
KVM_CAP_DIRTY_LOG_RING_ACQ_REL on ARM64. In this way, the newly added
capability is treated as an extension of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-4-gshan@redhat.com
Not all architectures like ARM64 need to override the function. Move
its declaration to kvm_dirty_ring.h to avoid the following compiling
warning on ARM64 when the feature is enabled.
arch/arm64/kvm/../../../virt/kvm/dirty_ring.c:14:12: \
warning: no previous prototype for 'kvm_cpu_dirty_log_size' \
[-Wmissing-prototypes] \
int __weak kvm_cpu_dirty_log_size(void)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-3-gshan@redhat.com
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel
at EL1
-----BEGIN PGP SIGNATURE-----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=XaXS
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.1-3' into kvm-arm64/dirty-ring
KVM/arm64 fixes for 6.1, take #3
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel
at EL1
Signed-off-by: Marc Zyngier <maz@kernel.org>
v3d_perfmon_open_file() instantiates a mutex for a particular file
instance, but it never destroys it by calling mutex_destroy() in
v3d_perfmon_close_file().
Similarly, v3d_perfmon_create_ioctl() instantiates a mutex for a
particular perfmon, but it never destroys it by calling mutex_destroy()
in v3d_perfmon_destroy_ioctl().
So, add the missing mutex_destroy on both cases.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-3-mcanal@igalia.com
mutex_init is supposed to be balanced by a call to mutex_destroy, but
this is not currently happening on the v3d driver.
Considering the introduction of a DRM-managed mutex_init variant, switch
to the drmm_mutex_init.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-2-mcanal@igalia.com
Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.
v2:
* Don't have struct drm_device as local. (Jani, Ville)
v3:
* Store gt, not i915, in workaround list. (John)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com
When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.
Fixes: 2257e05c17 ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The way mtrr_if is initialized with the correct mtrr_ops structure is
quite weird.
Simplify that by dropping the vendor specific init functions and the
mtrr_ops[] array. Replace those with direct assignments of the related
vendor specific ops array to mtrr_if.
Note that a direct assignment is okay even for 64-bit builds, where the
symbol isn't present, as the related code will be subject to "dead code
elimination" due to how cpu_feature_enabled() is implemented.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-17-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Instead of explicitly calling cache_ap_init() in
identify_secondary_cpu() use a CPU hotplug callback instead. By
registering the callback only after having started the non-boot CPUs
and initializing cache_aps_delayed_init with "true", calling
set_cache_aps_delayed_init() at boot time can be dropped.
It should be noted that this change results in cache_ap_init() being
called a little bit later when hotplugging CPUs. By using a new
hotplug slot right at the start of the low level bringup this is not
problematic, as no operations requiring a specific caching mode are
performed that early in CPU initialization.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-15-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Today, PAT is usable only with MTRR being active, with some nasty tweaks
to make PAT usable when running as a Xen PV guest which doesn't support
MTRR.
The reason for this coupling is that both PAT MSR changes and MTRR
changes require a similar sequence and so full PAT support was added
using the already available MTRR handling.
Xen PV PAT handling can work without MTRR, as it just needs to consume
the PAT MSR setting done by the hypervisor without the ability and need
to change it. This in turn has resulted in a convoluted initialization
sequence and wrong decisions regarding cache mode availability due to
misguiding PAT availability flags.
Fix all of that by allowing to use PAT without MTRR and by reworking
the current PAT initialization sequence to match better with the newly
introduced generic cache initialization.
This removes the need of the recently added pat_force_disabled flag, so
remove the remnants of the patch adding it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-14-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Instead of having a stop_machine() handler for either a specific
MTRR register or all state at once, add a handler just for calling
cache_cpu_init() if appropriate.
Add functions for calling stop_machine() with this handler as well.
Add a generic replacement for mtrr_bp_restore() and a wrapper for
mtrr_bp_init().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-13-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
In order to prepare decoupling MTRR and PAT replace the MTRR-specific
mtrr_aps_delayed_init flag with a more generic cache_aps_delayed_init
one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-12-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
There is no need for keeping __mtrr_enabled as it can easily be replaced
by testing mtrr_if to be not NULL.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-11-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
In case of the generic cache interface being used (Intel CPUs or a
64-bit system), the initialization sequence of the boot CPU is more
complicated than necessary:
- check if MTRR enabled, if yes, call mtrr_bp_pat_init() which will
disable caching, set the PAT MSR, and reenable caching
- call mtrr_cleanup(), in case that changed anything, call
cache_cpu_init() doing the same caching disable/enable dance as
above, but this time with setting the (modified) MTRR state (even
if MTRR was disabled) AND setting the PAT MSR (again even with
disabled MTRR)
The sequence can be simplified a lot while removing potential
inconsistencies:
- check if MTRR enabled, if yes, call mtrr_cleanup() and then
cache_cpu_init()
This ensures to:
- no longer disable/enable caching more than once
- avoid to set MTRRs and/or the PAT MSR on the boot processor in case
of MTRR cleanups even if MTRRs meant to be disabled
With that mtrr_bp_pat_init() can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-10-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Instead of using an indirect call to mtrr_if->set_all just call the only
possible target cache_cpu_init() directly. Remove the set_all function
pointer from struct mtrr_ops.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-9-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add a main cache_cpu_init() init routine which initializes MTRR and/or
PAT support depending on what has been detected on the system.
Leave the MTRR-specific initialization in a MTRR-specific init function
where the smp_changes_mask setting happens now with caches disabled.
This global mask update was done with caches enabled before probably
because atomic operations while running uncached might have been quite
expensive.
But since only systems with a broken BIOS should ever require to set any
bit in smp_changes_mask, hurting those devices with a penalty of a few
microseconds during boot shouldn't be a real issue.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-8-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Prepare making PAT and MTRR support independent from each other by
moving some code needed by both out of the MTRR-specific sources.
[ bp: Massage commit message. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-7-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Split the MTRR-specific actions from cache_disable() and cache_enable()
into new functions mtrr_disable() and mtrr_enable().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-6-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Rename the currently MTRR-specific functions prepare_set() and
post_set() in preparation to move them. Make them non-static and put
their prototypes into cacheinfo.h, where they will end after moving them
to their final position anyway.
Expand the comment before the functions with an introductory line and
rename two related static variables, too.
[ bp: Massage commit message. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-5-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
In MTRR code use_intel() is only used in one source file, and the
relevant use_intel_if member of struct mtrr_ops is set only in
generic_mtrr_ops.
Replace use_intel() with a single flag in cacheinfo.c which can be
set when assigning generic_mtrr_ops to mtrr_if. This allows to drop
use_intel_if from mtrr_ops, while preparing to decouple PAT from MTRR.
As another preparation for the PAT/MTRR decoupling use a bit for MTRR
control and one for PAT control. For now set both bits together, this
can be changed later.
As the new flag will be set only if mtrr_enabled is set, the test for
mtrr_enabled can be dropped at some places.
[ bp: Massage commit message. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-4-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
Fixes: 5f490c9680 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
