All dumpers use the iterators now, inline the cmd by index
stuff into iterator code.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't put the full iterator in the struct ctrl_dump_policy_ctx
because dump context is statically sized by netlink core.
Allocate it dynamically.
Rename policy to dump_map to make the logic a little easier to follow.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent changes will expose split op structures to users,
so walking the family ops with just an index will get harder.
Add a structured iterator, convert the simple cases.
Policy dumping needs more careful conversion.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers go via genl_get_cmd_split() now, so rename it
to genl_get_cmd() remove the original.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass do and dump versions of the op to ctrl_dumppolicy_put_op()
so that it can provide a different policy index for the two.
Since we now look at policies, and those are set appropriately
there's no need to look at the GENL_DONT_VALIDATE_DUMP flag.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Separate adding doit and dumpit policies for CTRL_CMD_GETPOLICY.
This has no effect until we actually allow do and dump to come
from different sources as netlink_policy_dump_add_policy()
does deduplication.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that genl_get_cmd_split() is informed what type of callback
user is trying to access (do or dump) we can check that this
callback is indeed available and return an error early.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the policy and maxattr pointers based on validation flags.
genl_family_rcv_msg_attrs_parse() will do nothing and return NULL
if maxattrs is zero, so no behavior change is expected.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have two forms of operations - small ops and "full" ops
(or just ops). The former does not have pointers for some of the less
commonly used features (namely dump start/done and policy).
The "full" ops, however, still don't contain all the necessary
information. In particular the policy is per command ID, while
do and dump often accept different attributes. It's also not
possible to define different pre_doit and post_doit callbacks
for different commands within the family.
At the same time a lot of commands do not support dumping and
therefore all the dump-related information is wasted space.
Create a new command representation which can hold info about
a do implementation or a dump implementation, but not both at
the same time.
Use this new representation on the command execution path
(genl_family_rcv_msg) as we either run a do or a dump and
don't have to create a "full" op there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the private fields down to form a "private section".
Use the kdoc "private:" label comment thing to hide them
from the main kdoc comment.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code at the top of ctrl_dumppolicy() dumps mappings between
ops and policies. It supports dumping both the entire family and
single op if dump is filtered. But both of those cases are handled
inside a loop, which makes the logic harder to follow and change.
Refactor to split the two cases more clearly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but one
particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
Typically we will eventually deactivate CQE (cqhci_suspend() ->
cqhci_deactivate()), but that's not guaranteed -- in particular, if
we perform a partial (e.g., interrupted) system suspend.
The same bug was already found and fixed for two other drivers, in v5.7
and v5.9:
5cf583f1fb ("mmc: sdhci-msm: Deactivate CQE during SDHC reset")
df57d73276 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel
GLK-based controllers")
The latter is especially prescient, saying "other drivers using CQHCI
might benefit from a similar change, if they also have CQHCI reset by
SDHCI_RESET_ALL."
So like these other patches, deactivate CQHCI when resetting the
controller. Do this via the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: 84362d79f4 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221026124150.v4.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Several SDHCI drivers need to deactivate command queueing in their reset
hook (see sdhci_cqhci_reset() / sdhci-pci-core.c, for example), and
several more are coming.
Those reset implementations have some small subtleties (e.g., ordering
of initialization of SDHCI vs. CQHCI might leave us resetting with a
NULL ->cqe_private), and are often identical across different host
drivers.
We also don't want to force a dependency between SDHCI and CQHCI, or
vice versa; non-SDHCI drivers use CQHCI, and SDHCI drivers might support
command queueing through some other means.
So, implement a small helper, to avoid repeating the same mistakes in
different drivers. Simply stick it in a header, because it's so small it
doesn't deserve its own module right now, and inlining to each driver is
pretty reasonable.
This is marked for -stable, as it is an important prerequisite patch for
several SDHCI controller bugfixes that follow.
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221026124150.v4.1.Ie85faa09432bfe1b0890d8c24ff95e17f3097317@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Add suspend/resume support
This series enables PM_SLEEP(suspend/resume) support to
the am65-cpsw network driver.
Dual-emac and Switch mode are tested to work with suspend/resume
on AM62-SK platform.
It can be verified on the following branch
https://github.com/rogerq/linux/commits/for-v6.2/am62-cpsw-lpm-1.0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On low power during system suspend the ALE table context is lost.
Save the ALE contect before suspend and restore it after resume.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During suspend resume the context of PORT_VLAN_REG is lost so
save it during suspend and restore it during resume for
host port and slave ports.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This can be used by device driver to restore ALE context.
The data produced by cpsw_ale_dump() can be passed to
cpsw_ale_restore().
This is required as on certain platforms the ALE context
is lost on low power suspend/resume.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add PM handlers for System suspend/resume.
As DMA driver doesn't yet support suspend/resume we free up
the DMA channels at suspend and acquire and initialize them
at resume.
Move the init/free dma calls to ndo_open/close() hooks so
it is symmetric and easier to invoke from suspend/resume handler.
As CPTS looses contect during suspend/resume, invoke the
necessary CPTS suspend/resume helpers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
CPTS looses context on suspend (e.g. on AM62).
Provide suspend/resume hooks in CPTS driver. These will be
invoked by CPSW driver if CPTS was instantiated by CPSW.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
which uses MBIM.
The exact channel configuration is not known but the Foxconn SDX55
configuration allows the modem to be used so reuse that one for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20221104093913.23347-1-johan+linaro@kernel.org
[mani: modified the subject to format "bus: mhi: host"]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
We have accessing P2SB from a very few places for quite known hardware.
When a new SoC appears in intel-family.h it's not obvious that it needs
to be added to p2sb.c as well. Instead, provide default BDF and refactor
p2sb_get_devfn() to always succeed. If in the future we would need to
exclude something, we may add a list of unsupported IDs.
Without this change the iTCO on Intel Comet Lake SoCs became unavailable:
i801_smbus 0000:00:1f.4: failed to create iTCO device
Fixes: 5c7b9167dd ("i2c: i801: convert to use common P2SB accessor")
Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221104154916.35231-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake)
devices IDs.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry
region, reads that are not done in QWORD quantities and alignment may
return incorrect data. Use a custom 64-bit copy for this region.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded
strange char "^@" which printed out every second and makes login
nearly impossible. Also the below messages were shown both in console
and journal/dmesg every second:
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 4, error -71
usb 1-3: device descriptor read/all, error -71
usb usb1-port3: unable to enumerate USB device
Wifi is soft blocked by checking rfkill. When unblocked manually,
after few seconds it would be soft blocked again. So I was suspecting
something triggered rfkill to soft block wifi. At the end it was
fixed by removing hp_wmi module.
The root cause is the way hp-wmi driver handles command 1B on
post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate
that BIOS no longer controls the power for the wireless devices.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Signed-off-by: Manyi Li <limanyi@uniontech.com>
Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux
support gets added (suggested by: Daniel Dadap)
cocci warnings: (new ones prefixed by >>)
>> drivers/net/phy/motorcomm.c:1122:8-35: duplicated argument to & or |
drivers/net/phy/motorcomm.c:1126:8-35: duplicated argument to & or |
drivers/net/phy/motorcomm.c:1130:8-34: duplicated argument to & or |
drivers/net/phy/motorcomm.c:1134:8-34: duplicated argument to & or |
The second YT8521_RC1R_GE_TX_DELAY_xx should be YT8521_RC1R_FE_TX_DELAY_xx.
Fixes: 70479a4095 ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Frank <Frank.Sae@motor-comm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Testing has shown that there are quite a few laptop models which rely
on native backlight control and which do not support ACPI video bus
backlight control, causing __acpi_video_get_backlight_type() to return
vendor. Known Windows laptop models affected by this are:
Acer Aspire 1640
HP Compaq nc6120
IBM ThinkPad X40
System76 Starling Star1
and the following MacBook models are affected too:
Apple MacBook 2.1
Apple MacBook 4.1
Apple MacBook Pro 7.1
the list of affected Windows laptop models is likely just the top of
the iceberg. So for now lets undo the change to not register native
backlight class devices when __acpi_video_get_backlight_type() != native.
Since as part of the backlight-detect refactor the detection code now
relies on the GPU drivers calling acpi_video_backlight_use_native() to
learn that native backlight support is available we cannot just remove
the acpi_video_backlight_use_native() calls from the GPU drivers.
Instead modify acpi_video_backlight_use_native() to always return true
for now. This is meant as a temporary work-around, which will be removed
again when the heuristics from __acpi_video_get_backlight_type() have
been improved so that they will return native on affected models.
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: John Warriner <taijitu@cox.net>
Reported-by: Scott Ostrander <sos12_3@hotmail.com>
Reported-by: Matthias Rampke <matthias.rampke@googlemail.com>
Reported-by: Milan Hodoscek <hmilan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If alloc_page() fails in gve_prefill_rx_pages(), it should return
an error code in the error path.
Fixes: 82fd151d38 ("gve: Reduce alloc and copy costs in the GQ rx path")
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Cc: Shailend Chand <shailend@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:
============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140
The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
sack_outs increase repeatly
In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.
socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \
--ignore-taint
socket-tcp* represent all socket-tcp tests in test/zdtm/static/.
Fixes: b139ba4e90 ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code logic of handling the quirk of FEC_QUIRK_HAS_RACC.
If a SoC has the RACC quirk, the driver will enable the 16bit shift
by default in the probe function for a better performance.
This patch handles the logic in one place to make the logic simple
and clean. The patch optimizes the fec_enet_xdp_get_tx_queue function
according to Paolo Abeni's comments, and it also exludes the SoCs that
require to do frame swap from XDP support.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netiucv_tx,
^~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcm_tx,
^~~~~~~
drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcmpc_tx,
^~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
The 1.4 GHz OPP requires supported silicon variant (T speed grade) and
also VDD_CORE to be at 0.85V. All production revisions of the AM625-SK
have both so we can enable the 1.4 GHz OPP for it. Any other boards
based on this design should verify that they have the right silicon
variant and the right power tree before adding 1.4 GHz support in their
board dts file.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make ti-cpufreq driver depend on ARCH_K3 and set it to `default y` so it
is always enabled for platforms that it depends on.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce an operating-points table for the A53 cores, containing only
frequency values as this platform operates on a fixed voltage for the
CPUs. Also provide opp-supported-hw values to ensure appropriate OPPs
are enabled based on which type of silicon is in use.
The latency between pre and post frequency transition was measured in
CPUFreq driver for all combinations of OPP changes. The average value
was selected as overall clock-latency-ns.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add ti,am625 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes so it is not
created twice.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for TI K3 AM625 SoC to read speed and revision values from
hardware and pass to OPP layer.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: aa730a9905 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: 2a54f2c779 ("net: iosm: net driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the work queue based RX flow with a NAPI implementation
Remove rx_thread and dpmaif_rxq_work.
Enable GRO on RX path.
Introduce dummy network device. its responsibility is
- Binds one NAPI object for each DL HW queue and acts as
the agent of all those network devices.
- Use NAPI object to poll DL packets.
- Helps to dispatch each packet to the network interface.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Acked-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hard_header_len is used by gro_list_prepare() but on Rx, there
is no header so use needed_headroom instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For squashfs all needed functionality for idmapped mounts is already
implemented by the generic handlers in the VFS. Thus, it is sufficient
to just enable the corresponding FS_ALLOW_IDMAP flag to support
idmapped mounts.
We use this for unprivileged (user namespaced) containers based on
squashfs images as rootfs in GyroidOS.
A simple test using the mount-idmapped tool executed as user with
uid=1000 looks as follows:
$ mkdir test
$ echo "test" > test/test_file
$ mksquashfs test/ fs.img
$ sudo mkdir /mnt/test
$ sudo mkdir /mnt/mapped
$ sudo mount fs.img -o loop /mnt/test/
$ sudo ./mount-idmapped --map-mount b:1000:2000:1 /mnt/test/ /mnt/mapped/
$ mount | tail -n2
fs.img on /mnt/test type squashfs (ro,relatime,errors=continue)
fs.img on /mnt/mapped type squashfs (ro,relatime,idmapped,errors=continue)
$ ls -lan /mnt/test/
total 5
drwxr-xr-x 2 1000 1000 32 Okt 24 13:36 .
drwxr-xr-x 6 0 0 4096 Okt 24 13:38 ..
-rw-r--r-- 1 1000 1000 5 Okt 24 13:36 test_file
$ ls -lan /mnt/mapped/
total 5
drwxr-xr-x 2 2000 2000 32 Okt 24 13:36 .
drwxr-xr-x 6 0 0 4096 Okt 24 13:38 ..
-rw-r--r-- 1 2000 2000 5 Okt 24 13:36 test_file
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
