In commit 0b639decf6 ("scsi: pm8001: Modify task abort handling for SATA
task"), code was introduced to dereference "task" pointer in
pm8001_abort_task(). However there was a pre-existing later check for
"!task", which spooked the kernel test robot.
Function pm8001_abort_task() should never be passed NULL for "task"
pointer, so remove that check. Also remove the "unlikely" hint, as this is
not fastpath code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666781764-123090-1-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS Boot and Device W-LUs do not have unit descriptors and RPMB does not
support WB. Use is_visible() to control which nodes are visible and which
are not.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-4-beanhuo@iokpp.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Combine ufshcd_get_lu_power_on_wp_status() and ufshcd_set_queue_depth()
into one single ufshcd_lu_init(), so that we only need to read the LUN
descriptor once.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-3-beanhuo@iokpp.de
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ccommit d3d9c45702 ("scsi: ufs: Fix memory corruption by
ufshcd_read_desc_param()") has properly fixed stack overflow issue.
As a result, commit a2fca52ee6 ("scsi: ufs: WB is only available on LUN
#0 to #7") is no longer required. Revert it.
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-2-beanhuo@iokpp.de
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable i is just being incremented and it's never used anywhere else. The
variable and the increment are redundant so remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221024141101.2161167-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
WLUN suspend and resume events are currently not handled by
ufshcd_print_evt_hist(). Add the missing events.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20221024120602.30019-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
state is deferenced earlier in the function, the NULL check
is pointless. Since we don't have any crash reports presumably
it's safe to assume state is not NULL.
Fixes: f392a18464 ("net: phylink: provide phylink_validate_mask_caps() helper")
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20221025185126.1720553-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My recent patch missed that mptcp_subflow_create_socket()
was creating a 'kernel' socket, then converted it to 'user' socket.
Fixes: 0cafd77dcd ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20221025180546.652251-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC
response. This patch adds support for dynamic usage bits for each opcode.
Set support of DPO & FUA bits in usage_bits of RSOC response depending on
support DPOFUA in the backstore device.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-7-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
RECEIVE COPY RESULTS is an opcode from 3rd party copy command set and shall
be rejected if emulate_3pc attribute is off like EXTENDED COPY.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-6-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow support for RSOC to be turned off via the emulate_rsoc attibute.
This is just for testing purposes.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report supported opcodes depending on a dynamic device configuration.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fill the strucures for supported opcodes and usage bits that are reported
in REPORT SUPPORTED OPERATION CODES command response.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221026081645.3186878-1-colin.i.king@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Re-pull from Stefan to fix the warnings.
Stefan Schmidt says:
====================
pull-request v2: ieee802154-next 2022-10-26
* tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
net: mac802154: Fixup function parameter name in docs
====================
Link: https://lore.kernel.org/r/20221026075638.578840-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable num_processed is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
- Fix some aspects of building with an older (than the one in the kernel
sources) libbpf present in a distro, when building with LIBBPF_DYNAMIC=1.
- Fix errno setting races with event_fd and the signal handler in 'perf record'.
- Fix Power10 hv-24x7 metric events when some events may have a zero count based
on system configuration.
- Do not fail Intel-PT misc test w/o libpython, just skip it.
- Fix incorrect arm64 Hisi hip08 L3 metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) due to mistakes in the documentation used
to generate the JSON files for these metrics.
- Fix auxtrace (Intel PT, ARM Coresight) address filter symbol name match for
modules, we need to skip the module name.
- Sync copies of files with the kernel sources, including ppc syscall tables
and assorted headers, some resulting in tools being able to decode new network
protocols (IPPROTO_L2TP) and statx masks (STATX_DIOALIGN).
- Fix PMU name pai_crypto in the vendor events file (JSON) for s390.
- Fix man page build wrt perf-arm-coresight.txt as the build process assumes
files starting with 'perf-' are man pages, and this file isn't one.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY1mapgAKCRCyPKLppCJ+
J2SXAP0cx2WLqsL4Q9brDh1aVBT0LQnlkP9ndMhxT3s0F5eTXQEAp2s7wF3T8q8h
153ZlBAUhvnXEOEXIHKZJxehnx2qDww=
=GUyo
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.1-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix some aspects of building with an older (than the one in the
kernel sources) libbpf present in a distro, when building with
LIBBPF_DYNAMIC=1.
- Fix errno setting races with event_fd and the signal handler in 'perf
record'.
- Fix Power10 hv-24x7 metric events when some events may have a zero
count based on system configuration.
- Do not fail Intel-PT misc test w/o libpython, just skip it.
- Fix incorrect arm64 Hisi hip08 L3 metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) due to mistakes in the
documentation used to generate the JSON files for these metrics.
- Fix auxtrace (Intel PT, ARM Coresight) address filter symbol name
match for modules, we need to skip the module name.
- Sync copies of files with the kernel sources, including ppc syscall
tables and assorted headers, some resulting in tools being able to
decode new network protocols (IPPROTO_L2TP) and statx masks
(STATX_DIOALIGN).
- Fix PMU name pai_crypto in the vendor events file (JSON) for s390.
- Fix man page build wrt perf-arm-coresight.txt as the build process
assumes files starting with 'perf-' are man pages, and this file
isn't one.
* tag 'perf-tools-fixes-for-v6.1-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics
perf auxtrace: Fix address filter symbol name match for modules
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers uapi: Update linux/in.h copy
tools headers: Update the copy of x86's memcpy_64.S used in 'perf bench'
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf test: Do not fail Intel-PT misc test w/o libpython
perf list: Fix PMU name pai_crypto in perf list on s390
perf record: Fix event fd races
perf bpf: Fix build with libbpf 0.7.0 by checking if bpf_program__set_insns() is available
perf bpf: Fix build with libbpf 0.7.0 by adding prototype for bpf_load_program()
perf vendor events power10: Fix hv-24x7 metric events
perf docs: Fix man page build wrt perf-arm-coresight.txt
tools headers UAPI: Sync powerpc syscall tables with the kernel sources
Commit 036177310b ("clk: mxl: Switch from direct readl/writel based IO
to regmap based IO") introduced code resulting in below warning issued
by the smatch static checker.
drivers/clk/x86/clk-lgm.c:441 lgm_cgu_probe() warn: passing zero to 'PTR_ERR'
Fix the warning by replacing incorrect IS_ERR_OR_NULL() with IS_ERR().
Fixes: 036177310b ("clk: mxl: Switch from direct readl/writel based IO to regmap based IO")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/49e339d4739e4ae4c92b00c1b2918af0755d4122.1666695221.git.rtanwar@maxlinear.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A collection of mostly unremarkable fixes for SPI that have built up
since the merge window, all driver specific.
The change to the qup adding support for GPIO chip selects is fixing a
regression due to the removal of legacy GPIO handling, the driver had
previously been silently relying on the legacy GPIO support in a
slightly broken way which worked well enough on some systems. Fixing
it is simply a case of setting a couple of bits of information in the
driver description.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmNZkaEACgkQJNaLcl1U
h9DKzAf+KmSNUIZ8rdfTTSvYj1SEuKd5O0YGLtRZsGLO6jhSNJ1EISCjw+9NHnoA
U/AKnnTBdexb+T5623prQL9ZU0U+JmMciHn2c34eDkvQcpdbD0ZbbqzcqxkUnPQ/
Ci5W0/9jlv7NupBSR6HXLJxjkuAVWNNUZPdy4Pb89kZIB4m/E/geRU+t/ZZgpvuf
v92AnRc0FtKlTFs2jrzScfV/R4+cygnoUoe2tJeDHYiN6ixJDJYZcU1yOcrE9544
+ovu166ZMRR6FuZ4Vd6Gso/befdaswUAwwWGghzg5IoWhIzvCkIHgtp78dk7oL29
xGgoq3lSjfzskvwNnHOWDB4tyQY7wg==
=Ni1v
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of mostly unremarkable fixes for SPI that have built up
since the merge window, all driver specific.
The change to the qup adding support for GPIO chip selects is fixing a
regression due to the removal of legacy GPIO handling, the driver had
previously been silently relying on the legacy GPIO support in a
slightly broken way which worked well enough on some systems. Fixing
it is simply a case of setting a couple of bits of information in the
driver description"
* tag 'spi-fix-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: aspeed: Fix window offset of CE1
spi: qup: support using GPIO as chip select line
spi: intel: Fix the offset to get the 64K erase opcode
spi: aspeed: Fix typo in mode_bits field for AST2600 platform
spi: mpc52xx: Replace NO_IRQ by 0
spi: spi-mem: Fix typo (of -> or)
spi: spi-gxp: fix typo in SPDX identifier line
spi: tegra210-quad: Fix combined sequence
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the R-Car V4H SoC.
Note that HSCIF0 is used for the serial console on the White-Hawk
development board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY1kNmwAKCRCKwlD9ZEnx
cHGMAP90gnxw9QtkoODnLu2MbcdNNoB/AFeY4O6snbGcwJTYEQD9GqBXxZ3rhZtR
t34KBpENqFdv5HByIxKQ0OT+yYRZew0=
=oXTL
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-fixes-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-fixes
Pull Renesas clk driver fixes from Geert Uytterhoeven:
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the R-Car V4H SoC.
Note that HSCIF0 is used for the serial console on the White-Hawk
development board.
* tag 'renesas-clk-fixes-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
With the introduction of the delayed disable-sched behavior,
we use the GuC's xarray of valid guc-id's as a way to
identify if new requests had been added to a context
when the said context is being checked for closure.
Additionally that prior change also closes the race for when
a new incoming request fails to cancel the pending
delayed disable-sched worker.
With these two complementary checks, we see no more
use for intel_context:guc_state:number_committed_requests.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006225121.826257-3-alan.previn.teres.alexis@intel.com
Add a delay, configurable via debugfs (default 34ms), to disable
scheduling of a context after the pin count goes to zero. Disable
scheduling is a costly operation as it requires synchronizing with
the GuC. So the idea is that a delay allows the user to resubmit
something before doing this operation. This delay is only done if
the context isn't closed and less than a given threshold
(default is 3/4) of the guc_ids are in use.
Alan Previn: Matt Brost first introduced this patch back in Oct 2021.
However no real world workload with measured performance impact was
available to prove the intended results. Today, this series is being
republished in response to a real world workload that benefited greatly
from it along with measured performance improvement.
Workload description: 36 containers were created on a DG2 device where
each container was performing a combination of 720p 3d game rendering
and 30fps video encoding. The workload density was configured in a way
that guaranteed each container to ALWAYS be able to render and
encode no less than 30fps with a predefined maximum render + encode
latency time. That means the totality of all 36 containers and their
workloads were not saturating the engines to their max (in order to
maintain just enough headrooom to meet the min fps and max latencies
of incoming container submissions).
Problem statement: It was observed that the CPU core processing the i915
soft IRQ work was experiencing severe load. Using tracelogs and an
instrumentation patch to count specific i915 IRQ events, it was confirmed
that the majority of the CPU cycles were caused by the
gen11_other_irq_handler() -> guc_irq_handler() code path. The vast
majority of the cycles was determined to be processing a specific G2H
IRQ: i.e. INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE. These IRQs are sent
by GuC in response to i915 KMD sending H2G requests:
INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_SET. Those H2G requests are sent
whenever a context goes idle so that we can unpin the context from GuC.
The high CPU utilization % symptom was limiting density scaling.
Root Cause Analysis: Because the incoming execution buffers were spread
across 36 different containers (each with multiple contexts) but the
system in totality was NOT saturated to the max, it was assumed that each
context was constantly idling between submissions. This was causing
a thrashing of unpinning contexts from GuC at one moment, followed quickly
by repinning them due to incoming workload the very next moment. These
event-pairs were being triggered across multiple contexts per container,
across all containers at the rate of > 30 times per sec per context.
Metrics: When running this workload without this patch, we measured an
average of ~69K INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE events every 10
seconds or ~10 million times over ~25+ mins. With this patch, the count
reduced to ~480 every 10 seconds or about ~28K over ~10 mins. The
improvement observed is ~99% for the average counts per 10 seconds.
Design awareness: Selftest impact.
As temporary WA disable this feature for the selftests. Selftests are
very timing sensitive and any change in timing can cause failure. A
follow up patch will fixup the selftests to understand this delay.
Design awareness: Race between guc_request_alloc and guc_context_close.
If a context close is issued while there is a request submission in
flight and a delayed schedule disable is pending, guc_context_close
and guc_request_alloc will race to cancel the delayed disable.
To close the race, make sure that guc_request_alloc waits for
guc_context_close to finish running before checking any state.
Design awareness: GT Reset event.
If a gt reset is triggered, as preparation steps, add an additional step
to ensure all contexts that have a pending delay-disable-schedule task
be flushed of it. Move them directly into the closed state after cancelling
the worker. This is okay because the existing flow flushes all
yet-to-arrive G2H's dropping them anyway.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006225121.826257-2-alan.previn.teres.alexis@intel.com
During GuC error capture initialization, we estimate the amount of size
we need for the error-capture-region of the shared GuC-log-buffer.
This calculation was incorrect so fix that. With the fixed calculation
we can reduce the allocation of error-capture region from 4MB to 1MB
(see note2 below for reasoning). Additionally, switch from drm_notice to
drm_debug for the 3X spare size check since that would be impossible to
hit without redesigning gpu_coredump framework to hold multiple captures.
NOTE1: Even for 1x the min size estimation case, actually running out
of space is a corner case because it can only occur if all engine
instances get reset all at once and i915 isn't able extract the capture
data fast enough within G2H handler worker.
NOTE2: With the corrected calculation, a DG2 part required ~77K and a PVC
required ~115K (1X min-est-size that is calculated as one-shot all-engine-
reset scenario).
Fixes: d7c15d76a5 ("drm/i915/guc: Check sizing of guc_capture output")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026060506.1007830-2-alan.previn.teres.alexis@intel.com
In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15.x
GuC will set the min/max frequencies to theoretical max on
ATS-M. This will break kernel ABI, so limit min/max frequency
to RP0(platform max) instead.
Also modify the SLPC selftest to update the min frequency
when we have a server part so that we can iterate between
platform min and max.
v2: Check softlimits instead of platform limits (Riana)
v3: More review comments (Ashutosh)
v4: No need to use saved_min_freq and other comments (Ashutosh)
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7030
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024225453.4856-1-vinay.belgaumkar@intel.com
Driver had discrepancy in how cdclk squash and crawl support
were checked. Like crawl, add squash as a 1 bit feature flag
to the display section of DG2.
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025223042.138810-2-anusha.srivatsa@intel.com
These PMICs all contain a GPIO controller. Now that the binding for this
variant is documented, wire up the controller in the device tree.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220916042751.47906-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The "ldo-io0" and "ldo-io1" regulators are enabled/disabled by toggling
the pinmux between two functions. This happens in the regulator driver.
Setting the pinmux to "ldo" in the DT is inappropriate because it would
enable the regulator before the driver has a chance to set the correct
initial voltage.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220916042751.47906-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
xfs_rename can update up to 5 inodes: src_dp, target_dp, src_ip, target_ip
and wip. So we need to increase the inode reservation to match.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Waitboost (when SLPC is enabled) results in a H2G message. This can result
in thousands of messages during a stress test and fill up an already full
CTB. There is no need to request for boost if min softlimit is equal or
greater than it.
v2: Add the tracing back, and check requested freq
in the worker thread (Tvrtko)
v3: Check requested freq in dec_waiters as well
v4: Only check min_softlimit against boost_freq. Limit this
optimization for server parts for now.
v5: min_softlimit can be greater than boost (Ashutosh)
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024171108.14373-1-vinay.belgaumkar@intel.com
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
There is a typo which keeps propagating through existing Intel machine
boards fix it with hope that fix stops it from appearing in new boards.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This is the part1 of my HDaudio cleanups, before the addition of
to-be-announced HDaudio extensions.
The patchset includes more consistent use of read/write/update
helpers, removal of useless waits, structure members and programming
sequences, removal of confusing sharing of private_data between FE and
BE.
Additional patches are coming to split the controller, codec and
multi-link management functionality in well-identified files.
Pierre-Louis Bossart (16):
ASoC: SOF: ops: fallback to mmio in helpers
ASoC: SOF: Intel: use mmio fallback for all platforms
ASoC: SOF: ops: add readb/writeb helpers
ASoC: SOF: ops: add snd_sof_dsp_updateb() helper
ASoC: SOF: Intel: hda-dsp: use SOF helpers for consistency
ASoC: SOF: Intel: hda-dai: start removing the use of
runtime->private_data in BE
ASoC: SOF: Intel: hda-dai: use component_get_drvdata to find hdac_bus
ASoC: SOF: Intel: hda-dai: remove useless members in hda_pipe_params
ASoC: SOF: Intel: hda-ctrl: remove useless sleep
ASoC: SOF: Intel: hda: always do a full reset
ASoC: SOF: Intel: hda: remove useless check on GCTL
ASoC: SOF: Intel: hda-stream: use SOF helpers for consistency
ASoC: SOF: Intel: hda-stream: rename CL_SD_CTL registers as SD_CTL
ASoC: SOF: Intel: hda: use SOF helper for consistency
ASoC: SOF: Intel: hda-stream: use snd_sof_dsp_updateb() helper
ASoC: SOF: Intel: hda-stream: use readb/writeb for stream registers
sound/soc/sof/intel/bdw.c | 6 +---
sound/soc/sof/intel/byt.c | 12 ++-----
sound/soc/sof/intel/hda-common-ops.c | 6 +---
sound/soc/sof/intel/hda-ctrl.c | 41 ++++++++--------------
sound/soc/sof/intel/hda-dai.c | 31 +++++++----------
sound/soc/sof/intel/hda-dsp.c | 12 ++++---
sound/soc/sof/intel/hda-loader-skl.c | 30 ++++++++--------
sound/soc/sof/intel/hda-loader.c | 4 +--
sound/soc/sof/intel/hda-stream.c | 47 ++++++++++++-------------
sound/soc/sof/intel/hda.c | 5 ++-
sound/soc/sof/intel/hda.h | 25 +++++++-------
sound/soc/sof/intel/pci-tng.c | 6 +---
sound/soc/sof/ops.h | 51 ++++++++++++++++++++--------
sound/soc/sof/sof-priv.h | 4 +++
14 files changed, 136 insertions(+), 144 deletions(-)
--
2.34.1
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:
This series is a preparatory cleanup of the jz4740-i2s driver before
adding support for a new SoC. The two improvements are lifting
unnecessary restrictions on sample rates and formats -- the existing
ones appear to be derived from the limitations of the JZ4740's internal
codec and don't reflect the actual capabilities of the I2S controller.
I'm unable to test the series on any JZ47xx SoCs, but I have tested
on an X1000 (which is the SoC I'll be adding in a followup series).
kernel-patches/bpf failed with error:
Running bpftool checks...
Comparing /data/users/ast/net-next/tools/include/uapi/linux/bpf.h (bpf_map_type) and
/data/users/ast/net-next/tools/bpf/bpftool/map.c (do_help() TYPE):
{'cgroup_storage_deprecated', 'cgroup_storage'}
Comparing /data/users/ast/net-next/tools/include/uapi/linux/bpf.h (bpf_map_type) and
/data/users/ast/net-next/tools/bpf/bpftool/Documentation/bpftool-map.rst (TYPE):
{'cgroup_storage_deprecated', 'cgroup_storage'}
The selftests/bpf/test_bpftool_synctypes.py runs checking in the above.
The failure is introduced by Commit c4bcfb38a95e("bpf: Implement cgroup storage available
to non-cgroup-attached bpf progs"). The commit introduced BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED
which has the same enum value as BPF_MAP_TYPE_CGROUP_STORAGE.
In test_bpftool_synctypes.py, one test is to compare uapi bpf.h map types and
bpftool supported maps. The tool picks 'cgroup_storage_deprecated' from bpf.h
while bpftool supported map is displayed as 'cgroup_storage'. The test failure
can be fixed by explicitly replacing 'cgroup_storage_deprecated' with 'cgroup_storage'
in uapi bpf.h map types.
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221026163014.470732-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clang warns:
fs/ntfs3/namei.c:445:7: error: variable 'uni1' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (toupper(c1) != toupper(c2)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/ctype.h:64:20: note: expanded from macro 'toupper'
#define toupper(c) __toupper(c)
^
fs/ntfs3/namei.c:487:12: note: uninitialized use occurs here
__putname(uni1);
^~~~
./include/linux/fs.h:2789:65: note: expanded from macro '__putname'
#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
^~~~
fs/ntfs3/namei.c:445:3: note: remove the 'if' if its condition is always false
if (toupper(c1) != toupper(c2)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ntfs3/namei.c:434:7: error: variable 'uni1' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!lm--) {
^~~~~
fs/ntfs3/namei.c:487:12: note: uninitialized use occurs here
__putname(uni1);
^~~~
./include/linux/fs.h:2789:65: note: expanded from macro '__putname'
#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
^~~~
fs/ntfs3/namei.c:434:3: note: remove the 'if' if its condition is always false
if (!lm--) {
^~~~~~~~~~~~
fs/ntfs3/namei.c:430:22: note: initialize the variable 'uni1' to silence this warning
struct cpu_str *uni1, *uni2;
^
= NULL
2 errors generated.
There is no point in calling __putname() in these particular error
paths, as there has been no corresponding __getname() call yet. Just
return directly in these blocks to clear up the warning.
Fixes: a3a956c78e ("fs/ntfs3: Add option "nocase"")
Link: https://github.com/ClangBuiltLinux/linux/issues/1729
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The gadget driver may have a certain expectation of how the request
completion flow should be from to its configuration. Make sure the
controller driver respect that. That is, don't set IMI (Interrupt on
Missed Isoc) when usb_request->no_interrupt is set. Also, the driver
should only set IMI to the last TRB of a chain.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When servicing a transfer completion event, the dwc3 driver will reclaim
TRBs of started requests up to the request associated with the interrupt
event. Currently we don't check for interrupt due to missed isoc, and
the driver may attempt to reclaim TRBs beyond the associated event. This
causes invalid memory access when the hardware still owns the TRB. If
there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure
to stop servicing further.
Note that only the last TRB of chained TRBs has its status updated with
missed isoc.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Reported-by: Jeff Vanhoof <jdv1029@gmail.com>
Reported-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1a1daf097e ("PCI/PM: Remove unused pci_driver.suspend_late() hook")
removed the legacy .suspend_late() hook, which was the only user of the
"state" parameter to pci_legacy_suspend_late(), but it neglected to remove
the parameter.
Remove the unused "state" parameter to pci_legacy_suspend_late().
Link: https://lore.kernel.org/r/20221025193502.669091-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
