Add 'cpu' and 'cpuN' to possible values for 'linux,default-trigger'.
There's 45 cases of them in upstream dts files.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The driver works just fine if no platform data is supplied.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Be consistent in whether we flag a full modeset or a
fastset for the pipe. intel_modeset_all_pipes() would
seem to be the only codepath not getting this right.
The other case is when we flag the fastset initially,
currently we just clear the mode_changed flag and set
the update_pipe flag. But we could still have
connectors_changed==true or active_changed==true forcing
a full modeset anyway. So check for that after clearing
the mode_changed flag.
And let's add a WARN to make sure we did get it right.
v2: Deal with {connectors,active}_changed
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-4-ville.syrjala@linux.intel.com
Replace the somewhat obscure crtc_state.update_pipe checks
with a more descriptive thing. Also nicely matches the
intel_crtc_needs_modeset() counterpart for full modesets.
v2: Handle one more case in the fbc code
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-2-ville.syrjala@linux.intel.com
On BDW+ we have just the one set of DP M/N registers. The
values we write into said registers depends on whether we
want DRRS to be in high or low gear. This causes issues
for the state checker which currently has to assume either
set of M/N (high or low refresh rate) values may appear there.
That sort of works for M/N itself, but all other values
derived from the M/N (dotclock, pixel rate) are not handled
correctly, leading to potential for state checker mismatches.
Let's avoid all those problems by simply keeping DRRS in
high gear until the state checker has done its hardware
state readout.
Note that hitting this issue presumable became very hard
after commit 1b333c679a ("drm/i915: Do DRRS disable/enable
during pre/post_plane_update()") since the state check would
have to laze about for one full second (delay used by
intel_drrs_schedule_work()) to see the low refresh rate.
But it is still theoretically possible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020120706.25728-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Al Cooper is no longer the internal broadcom maintainer for broadcom
USB. I will be taking his place as the internal maintainer and as an
additional upstream maintainer.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665167529-9840-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe has done a wonderful job over the years, but now it makes sense
to just maintain all of the USB stack in one tree. Do so by removing
the current USB gadget and phy entries so that all portions of the stack
are now covered by the main USB maintainer entry.
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20220930114041.1306711-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a conflict between the call-depth tracking commits in x86/core:
ee3e2469b3 ("x86/ftrace: Make it call depth tracking aware")
36b64f1012 ("x86/ftrace: Rebalance RSB")
eac828eaef ("x86/ftrace: Remove ftrace_epilogue()")
And these fixes in x86/urgent:
883bbbffa5 ("ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()")
b5f1fc3184 ("x86/ftrace: Remove ftrace_epilogue()")
It's non-trivial overlapping modifications - resolve them.
Conflicts:
arch/x86/kernel/ftrace_64.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
defined but never used. As they do not appear to be designed for anything
significant, we can remove them to avoid unexpected usage.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/efaf637a14b6f7fdd0178e2aecf8abf17e6922f6.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly spacing out code statements/instructions improves code
readability. Add missing or remove extra space as necessary according
to the Linux Kernel coding-style guidelines. Following errors reported
by checkpatch script for inconsistent code spacing:
ERROR: space prohibited before that close parenthesis ')'
ERROR: space prohibited before that ',' (ctx:WxW)
CHECK: spaces preferred around that '&' (ctx:VxV)
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/4559d1a406b9f32379ec01cfadacea13a11803ac.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Open braces '{" should be placed on the line of symbol declaration as
per the coding-style guidelines. Improves readability and matches with
style used in rest of the code. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/375f742936493b562bd4dfba90eb75bd8ab84f8a.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spaces are prohibited as per the Linux coding style guidelines. Replace
those by tabs wherever possible to improve code alignment. Error
reported by checkpatch script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/c32b702c61ea3367d60f0a4c2443093d6ce45a69.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer symbol '*' should be associated with the function parameter
name and not its type. This improves code readability and adheres to the
coding-style guidelines. Address following checkpatch reported error:
ERROR: "foo * bar" should be "foo *bar"
While in there, update parameter name at one place to match other function
declarations.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/d946b69bfdfb44baae3a130e412ed2e217a710a7.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Space required between function and macro parameters to improve code
readability. This Linux kernel coding style guideline resolves following
error reported by checkpatch script:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/ce200b3a986628f943dfb0c4e412276793e59bbc.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macro "htons" is more efficient and clearer. It should be used for
constants instead of the __constant_htons macro. Resolves following
checkpatch script complaint:
WARNING: __constant_htons should be htons
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/b46adfbdce0362ed0dbe0fc957ef2f47a93c24bb.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the Linux kernel coding-style guidelines, there is no need to
use {} for single statement blocks. Issue flagged by checkpatch script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/a50460e1507621b29a7901cc4ff9501b172417db.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow the Linux Kernel coding style variable naming convention instead
of using camelCase style. Issue reported by checkpatch script for
these variables:
tagLen, tagType, networkAddr, ipAddr, macAddr
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/a107c527e9032c22a62e93ff12d5fae625e70212.1666299151.git.drv@mailo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the misleading struct type name dim_ch_state_t to dim_ch_state
since this not a typedef but a normal structure declaration.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y1GDQO+06fD24Pf/@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a TODO file that lists the tasks that should be carried out in
order to move this driver off drivers/staging. It's missing from original
addition of this driver.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221016110743.1448067-4-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver directory where it was proposed to move to has changed,
while add it add some more pieces this driver to update.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221016110743.1448067-2-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a TODO file that lists the tasks that should be carried out in
order to move this driver off drivers/staging. It's missing from original
addition of this driver.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221016110743.1448067-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable xcnt being incremented but it is never referenced,
it is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221021180950.29139-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_ktype() does not modify the structure passed to it, so mark the
parameter as being const to allow other const structures to be passed to
it in the future.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221021072310.3931690-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
-----BEGIN PGP SIGNATURE-----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=C0jb
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #2
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
-----BEGIN PGP SIGNATURE-----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=IOxM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
HP ZBook Firefly 16 G9 (103c:896d) and HP ZBook Power 15.6 G9
(103c:89c0) require the same quirk for enabling CS35L41 speaker amps.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221022072107.3401-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently `sp_indiff` is cleaned when driver is removed. This will
cause problem in multi-PF/multi-host case, considering one PF is
removed while another is still in use.
Since `sp_indiff` is the application firmware property, it should
only be cleaned when the firmware is unloaded. Now let management
firmware to clean it when necessary, driver only set it.
Fixes: b1e4f11e42 ("nfp: refine the ABI of getting `sp_indiff` info")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221020081411.80186-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Rangoju says:
====================
amd-xgbe: Miscellaneous fixes
(1) Fix the rrc for Yellow carp devices. CDR workaround path
is disabled for YC devices, receiver reset cycle is not
needed in such cases.
(2) Add enumerations for mailbox command and sub-commands.
Instead of using hard-coded values, use enums.
(3) Enable PLL_CTL for fixed PHY modes only. Driver does not
implement SW RRCM for Autoneg Off configuration, hence PLL
is needed for fixed PHY modes only.
(4) Fix the SFP compliance codes check for DAC cables. Some of
the passive cables have non-zero data at offset 6 in
SFP EEPROM data. So, fix the sfp compliance codes check.
(5) Add a quirk for Molex passive cables to extend the rate
ceiling to 0x78.
====================
Link: https://lore.kernel.org/r/20221020064215.2341278-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected
to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex
passive cables have the rate ceiling 0x78 at offset 12.
Add a quirk for Molex passive cables to extend the rate ceiling to 0x78.
Fixes: abf0a1c2b2 ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.
Fixes: abf0a1c2b2 ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PLL control setting(RRC) is needed only in fixed PHY configuration to
fix the peer-peer issues. Without the PLL control setting, the link up
takes longer time in a fixed phy configuration.
Driver implements SW RRC for Autoneg On configuration, hence PLL control
setting (RRC) is not needed for AN On configuration, and can be skipped.
Also, PLL re-initialization is not needed for PHY Power Off and RRC
commands. Otherwise, they lead to mailbox errors. Added the changes
accordingly.
Fixes: daf182d360 ("net: amd-xgbe: Toggle PLL settings during rate change")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using hardcoded values, use enumerations for mailbox command
and sub commands.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link stability issues are noticed on Yellow carp platforms when Receiver
Reset Cycle is issued. Since the CDR workaround is disabled on these
platforms, the Receiver Reset Cycle is not needed.
So, avoid issuing rrc on Yellow carp platforms.
Fixes: dbb6c58b5a ("net: amd-xgbe: Add Support for Yellow Carp Ethernet device")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in a Kconfig option description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
To follow the existing per-arch conventions, using "current_stack_pointer"
to set sp.
This will let it be used in non-arch places(like HARDENED_USERCOPY).
Refer to the implementation of riscv commit fdecfea093 ("riscv: Rename
"sp_in_global" to "current_stack_pointer"").
Link: https://lore.kernel.org/lkml/20220224060411.1855683-1-keescook@chromium.org/
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
