When watchdog is enabled at the probe time, the bd96801 driver retrieves
the timeout configuration from the registers to set-up the heart-beat
values.
As Sashiko pointed out at
https://lore.kernel.org/all/20260722085819.495211F000E9@smtp.kernel.org/
the timeout values are incorrectly computed in driver, resulting wrong
heartbeat. This leads to devere problems if watchdog was enabled at probe
time.
According to the data-sheet, the "too fast" ping limit is configured as
multiple of FASTNG_MIN. Furthermore, the "too slow" ping limit is
configured as multiples of "too fast" timeout. The FASTNG_MIN is set to
11, meaning 1.1 mS and "too fast" and "too slow" limits are computed from
this. Hence, converting the limits to mS should be done by dividing by 10,
not by dividing by USEC_PER_MSEC.
Fix this by dividing the timeout values with correct scaling factor.
While at it, fix whitespace problem (double empty line).
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 09dad69757 ("watchdog: ROHM BD96801 PMIC WDG driver")
Link: https://lore.kernel.org/r/amxskHmQbi9v-8_l@mva-rohm
[groeck: Added reference to whitespace change to description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes: e876b75b90 ("ipvs: fix the checksum validations")
Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org
Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the initial ipset rhashtable conversion RFC series syzbot reported
following splat:
BUG: sleeping function [..] at kernel/irq_work.c:289
in_atomic(): 1, [..]
irq_work_sync.. kernel/irq_work.c:289
rhashtable_free_and_destroy.. lib/rhashtable.c:1295
hash_netport4_destroy.. net/netfilter/ipset/ip_set_hash_gen.h:420
ip_set_destroy_set_rcu.. net/netfilter/ipset/ip_set_core.c:1169
rcu_core.. kernel/rcu/tree.c:2897
This is because post-rhashtable-conversion hash implementation needs
to schedule in the destroy callback. At this time this isn't allowed.
Replace existing call_rcu() based destruction with rcu_work api.
Also allows to undo split of set destruction and gc work cancelling in
a future patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Preparation patch. Once the ipset hash table is replaced with rhashtable
these functions are needed. Add them in extra commit to have reviewable
chunks.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The hash types do not acquire set->lock, they use 'region locking' where
only part of the hash table is locked. Parallel inserts and deletes are
possible and CPUs can race on ->ext_size update. Switch to atomic64_t.
This leaves another bug unresolved: there still can be a race on
comment extension re-init. This will be handled in a later commit
when converting to rhashtable backend.
Fixes: f66ee0410b ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
According to sashiko, the current bookkeeping of cidr values are unsafe
on weakly-ordered architectures. Replace the in-place updating with an
RCU based method: create the new bookeeping structure, update and replace
the old one with the new. Downside that we need to allocate memory when
deleting a cidr entry - in case of memory pressure fall back to leave holes
which possibility is taken into account at evaluation time.
Thanks to Pablo (Pablo Neira Ayuso <pablo@netfilter.org>) and Cyntia
(Cynthia <cynthia@kosmx.dev>) for helping me in debugging which resulted
the patch "netfilter: ipset: allocate the proper memory for the generic
hash structure" on which this very patch depends.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_log_unregister() runs after the per-net teardown so its final RCU
grace period also drains readers that obtained the logger from a per-net
binding. However, ebt_nflog passes an explicit ULOG log type to
nf_log_packet() without holding a reference on the selected logger module,
unlike the xt_NFLOG and nft_log frontends.
An ebtables nflog rule can therefore remain callable while nfnetlink_log
is unloaded. The resulting interleaving is:
CPU 0 CPU 1
nfnetlink_log_fini()
unregister_pernet_subsys()
kfree(nfnl_log_pernet(net))
ebt_nflog_tg()
nf_log_packet()
nfulnl_log_packet()
instance_lookup_get_rcu()
The global ULOG logger is still registered at this point, so CPU 1
dereferences the per-net state after CPU 0 has freed it. KASAN reported:
BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu
Read of size 8 at addr ff110001052e6210 by task poc/92
Call Trace:
instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log]
nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log]
nf_log_packet+0x204/0x300
ebt_nflog_tg+0x351/0x550
ebt_do_table+0xedf/0x22b0
Allocated by task 90:
__kmalloc_noprof+0x186/0x470
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
register_pernet_subsys+0x23/0x40
Freed by task 93:
kfree+0x131/0x3c0
ops_undo_list+0x3e3/0x700
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
nfnetlink_log_fini+0x34/0x450 [nfnetlink_log]
Acquire the ULOG logger module reference when an ebt_nflog rule is
validated and release it when the rule is destroyed. Request the NFLOG
backend for legacy callers when needed, matching xt_NFLOG. This prevents
module teardown until all ebt_nflog rules have stopped using the logger.
Fixes: c83fa19603 ("netfilter: nf_log: don't call synchronize_rcu in nf_log_unset")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Resetting the PCMSyCM registers is required for Intel SoundWire stream. The
same procedure is done in sdw_hda_dai_hw_params() for the normal
SoundWire stream, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20260730012518.2180906-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper function _ip_cprb_helper() uses internal buffer memory for
building and processing CPRBs. After use this buffer was never
scrubbed which could lead to leaving for example clear key material in
memory which could be exposed via tricky reuse of this same memory.
Extend the _ip_cprb_helper() function with another parameter 'scrub'
used to steer scrubbing of this buffer. So now the caller has the
opportunity to decide if scrubbing is needed or not.
Extend the clear key to secure key token import process in function
cca_clr2cipherkey() to tell the helper function from above to scrub
the cprb buffer when the clear key value is part of the request data.
Add explicit scrubbing on return from function cca_clr2cipherkey() for
the random EXOR buffer and the cprb buffer.
Overall this cleans the internal used buffer in case of clear key
import to prevent sensitive data to get exposed.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Cc: stable@vger.kernel.org
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a wrong upper limit check for the domain value when an EP11
CPRB is processed for sending to a crypto card. This check is only
active on custom device nodes but may lead to access heap memory
behind perms->adm when an administrative CPRB is sent.
Add correct limit (AP_DOMAINS = 256) checking to fix this.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Cc: stable@vger.kernel.org
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.4+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a machine without PCI memory-I/O (MIO) support or when running with
pci=nomio the s390 specific PCI MMIO write syscall checks if the MMIO
cookie is above ZPCI_IOMAP_ADDR_BASE as a sanity check before even
trying to perform the MMIO. If this check fails the return value was
left unchanged and thus 0 from prior operations falsely indicating
success. This could potentially confuse user-space into falsely
believing the MMIO, on a mapping not valid for MMIO was successful.
Fix this by setting the return value to -EFAULT prior to the check
following the same pattern as elsewhere in the same function.
Cc: stable@vger.kernel.org
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Fixes: a67a88b0b8 ("s390/pci: remove races against pte updates")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The read buffer allocation was changed from kmalloc() to kvmalloc().
This buffer is part of mei_cl_cb structure that can be queued in
rd_complete queue protected by spinlock.
Releasing the structure leads to errors like below when freeing buffer
that allocated non-contiguous:
BUG: sleeping function called from invalid context at mm/vmalloc.c:3448
Separate mei_cl_cb structure dequeue and release to
perform only dequeue under spinlock and push release out of spinlock.
Cc: stable <stable@kernel.org>
Fixes: 4adf613e01 ("mei: use kvmalloc for read buffer")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16359
Reviewed-by: Menachem Adin <menachem.adin@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260719-kvfree_out_of_spinlock-v1-1-e07d6333bea7@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iomap_split_ioend can split bios that already come from
iomap_ioend_bioset and thus deadlock when the bioset is exhausted.
Add a separate bio_set to avoid this deadlock.
Christian Brauner <brauner@kernel.org> says:
Mark iomap_ioend_split_bioset static as it is only used in ioend.c,
fixing the sparse warning reported by the kernel test robot.
Fixes: 5fcbd555d4 ("iomap: split bios to zone append limits in the submission handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260629125229.3400726-1-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The get_current_thread() method is currently called for every ioctl to
ensure that a Thread struct exists for the thread calling into the
driver. However, not all ioctls require a Thread object, so this means
we are unnecessarily creating these objects in cases where we don't need
to. If said thread does not invoke BINDER_THREAD_EXIT on exit, Binder's
Thread struct stays around until the fd is closed. For long-lived
processes the Thread object is effectively leaked.
Furthermore, when the BINDER_GET_NODE_DEBUG_INFO ioctl is invoked by
libmemunreachable to ensure that objects reachable only through the
Binder driver are not considered leaked, this is done from a fork of the
process owning the fd, which means that it fails the group_leader check
inside get_current_thread(). This results in EINVAL errors for this
ioctl, causing libmemunreachable to report a false positive memory leak.
Thus, do not invoke get_current_thread() for ioctls that do not require
it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260727-binder-cur-thread-v1-1-8edf2b64e235@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current implementation isn't working well when device tree nodes have a
phandle on a fixed-layout nvmem node. As the fixed layout is handled in
nvmem core, no driver is ever associated with the layout, and the device
consumer driver probe is deferred indefinitely.
Remove the specific handling of fixed-layout and add a layout driver.
This makes the fixed-layout similar to all other layouts, fixing the
whole issue.
Fixes: fc29fd821d ("nvmem: core: Rework layouts to become regular devices")
Cc: stable@vger.kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Apple SPMI NVMEM driver previously cast regmap_bulk_read/write to
void * when assigning them to nvmem_config's reg_read/reg_write
function pointers.
This cast breaks the expected function signature of nvmem_reg_read_t
and nvmem_reg_write_t. With CFI enabled, indirect calls through
these pointers fail:
CFI failure at nvmem_reg_write+0x194/0x1e4 (target: regmap_bulk_write+0x0/0x2c8; expected type: 0x83a189c3)
...
Call trace:
nvmem_reg_write+0x194/0x1e4 (P)
__nvmem_cell_entry_write+0x298/0x2e8
nvmem_cell_write+0x24/0x34
macsmc_reboot_probe+0x1dc/0x454 [macsmc_reboot]
...
Introduce thin wrapper functions with the correct nvmem function
pointer types to satisfy the CFI checks.
Fixes: fe91c24a55 ("nvmem: Add apple-spmi-nvmem driver")
Signed-off-by: Aelin Reidel <aelin@mainlining.org>
Reported-by: Clayton Craft <craftyguy@postmarketos.org>
Tested-by: Clayton Craft <craftyguy@postmarketos.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'ctx_idr' is initialized but never destroyed when
the channel context is freed, leading to a memory leak.
Add idr_destroy() to properly clean up the IDR resources.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org
Signed-off-by: Eddie Lin <eddie.lin@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-6-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_channel_ctx_get() is called in fastrpc_device_open() before
fastrpc_session_alloc(). If session alloc fails, the error path
returns -EBUSY without calling fastrpc_channel_ctx_put(), leaking
the reference. Fix by adding the missing put.
Fixes: 278d56f970 ("misc: fastrpc: Reference count channel context")
Cc: stable@kernel.org
Signed-off-by: Anandu Krishnan E <anandu.e@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an invoke is interrupted by a signal,
wait_for_completion_interruptible() returns -ERESTARTSYS and
fastrpc_internal_invoke() moves every buffer from fl->mmaps onto
cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk
runs without holding fl->lock, the lock that serialises fl->mmaps in
fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else.
Take fl->lock around the move, matching every other fl->mmaps accessor.
Fixes: 76e8e4ace1 ("misc: fastrpc: Safekeep mmaps on interrupted invoke")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list.
Fixes: 2419e55e53 ("misc: fastrpc: add mmap/unmap support")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial buffer allocated for the Audio PD memory pool is never added
to the pool because pageslen is set to 0. As a result, the buffer is not
registered with Audio PD and is never used, causing a memory leak. Audio
PD immediately falls back to allocating memory from the remote heap since
the pool starts out empty.
Fix this by setting pageslen to 1 so that the initially allocated buffer
is correctly registered and becomes part of the Audio PD memory pool.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return.
Fixes: dd1a756778 ("uprobes: SRCU-protect uretprobe lifetime (with timeout)")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260729-uprobe-v1-1-61896b87c867@debian.org
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes.
Fixes: f5a544e3ba ("ksmbd: add support for SMB3 multichannel")
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Reported-by: Samu <nomomentomori@gmail.com>
Suggested-by: Samu <nomomentomori@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table.
Fixes: 8510a043d3 ("ksmbd: increment reference count of parent fp")
Reported-by: Yunseong Kim <yunseong.kim@est.tech>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
pdsc_check_pci_health() queues pci_reset_work when it sees a broken PCI
connection, and nothing cancels it. When the PCI core starts AER
recovery, pdsc_pci_error_detected() runs pdsc_reset_prepare() and
recovers the device, but a pci_reset_work queued just before is left
pending. If it runs after recovery released the device lock, it resets a
device the driver now considers healthy, bouncing the link for no reason.
Cancel pci_reset_work in pdsc_pci_error_detected() after
pdsc_reset_prepare(), which has already stopped the health thread so it
cannot requeue the work. cancel_work_sync() is safe under the device
lock here because pdsc_pci_reset_thread() uses pci_try_reset_function(),
which returns instead of blocking on the lock. Only PFs initialize
pci_reset_work, so guard the cancel with !is_virtfn.
Fixes: 81665adf25 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260714180223.1642792-2-nikhil.rao%40amd.com?part=1
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727170030.361116-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d9407ff118 ("pds_core: Prevent health thread from running
during reset/remove") stops the health thread with cancel_work_sync()
before a reset, but a devcmd timeout during pdsc_fw_down() re-queues
health_work, so pdsc_health_thread() runs again mid-reset and double
allocates the core DMA queues via pdsc_fw_up().
Only the reset path is affected: on remove PDSC_S_STOPPING_DRIVER gates
the health thread and the workqueue is destroyed.
Use disable_work_sync() to cancel health_work and block further
queue_work() on it, and enable_work() in pdsc_restart_health_thread() to
re-allow it after the reset.
disable_work_sync() keeps a disable depth, so every disable must be
matched by one enable. pdsc_reset_prepare() stops the health thread and
pdsc_reset_done() restarts it. On the AER path pdsc_pci_error_detected()
calls pdsc_reset_prepare(), then pdsc_pci_error_resume() re-inits via
pci_reset_function_locked() (pds_core has no .slot_reset handler), which
runs the pair again - stopping the thread twice but restarting it once.
Gate the disable and enable on a health_stopped flag so each fires at
most once per stopped/running transition.
Fixes: d9407ff118 ("pds_core: Prevent health thread from running during reset/remove")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727164548.359562-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 04de7dda73 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260728044338.2271143-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work.
Fixes: 937317c7c1 ("enic: do hang reset only in case of tx timeout")
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260728062730.2394873-1-satishkh@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f9 ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f9. Compile-tested.
Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should either have net_iov or page backed frags in a single skb,
otherwise it blows up down the stack. Don't allow mixing in
zerocopy_fill_skb_from_devmem().
Fixes: bd61848900 ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/e3199788c4732545627a4721097ebb71ad737bab.1785150502.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision.
Fixes: d0e81b7e22 ("bonding: Acquire correct locks in alb for promisc change")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260725233930.2957317-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit a8065af334.
Per the USB4 spec, a Transmit Descriptor Ring with E2E flow control
disabled does not require any credits to be available before the Host
Interface Adapter Layer transmits a tunneled packet from it. Once E2E is
enabled on that ring the controller must first obtain end-to-end
credits.
The ASMedia ASM4242 USB4 host router (PCI 1b21:2425) never delivers
those credits. The controller does accept the configuration: reading the
ring OPTIONS register back right after tb_ring_start() returns exactly
what was written, including RING_FLAG_E2E_FLOW_CONTROL (bit 28) and the
E2E HopID field. No credit ever arrives though, so the Tx ring's
hardware consumer index never advances and the link carries no traffic
at all.
Measured on two hosts connected point to point, onboard ASM4242 on MSI
X870E and X870, v6.17, stock drivers/net/thunderbolt/main.c with only
this revert applied on top:
before: 100% packet loss to the peer; thunderbolt0 is up and the
XDomain handshake completes ("new host found"), but iperf3
fails with "No route to host" once the neighbour entry
expires
after: 0% packet loss, 0.28 ms RTT; iperf3 4.21 Gb/s one way and
5.17 Gb/s the other (5 runs each, stddev <= 0.02), 1
retransmit in 10 s
An instrumented build additionally showed a frozen-Tx-consumer watchdog
firing ~30k times in a 10 s window before this change.
Rx-side E2E is not touched by this revert, so peers that do return
credits keep receive-side flow control.
ASMedia does not look like an isolated case. The out-of-tree
thunderbolt-ibverbs project disables native E2E on AMD NHI by default,
noting that "Strix Halo has reproduced TX completion wedges with
multiple native E2E rings active" -- the same failure mode, on a
different vendor. Since the driver has no way to tell in advance which
host router returns the credits, going back to the previous behaviour
looks safer than adding a quirk per affected part; Tx-side E2E can be
reintroduced as an opt-in for controllers that are known to implement
the credit return.
Note that the reverted commit was not fixing a reported problem, it was
derived from the spec wording alone, so this revert is not expected to
regress a known workload. Cc'ing the original author in case there was
one.
Fixes: a8065af334 ("net: thunderbolt: Enable end-to-end flow control also in transmit")
Cc: zhangjianrong <zhangjianrong5@huawei.com>
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260727123002.25225-1-fy15309206903@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes.
Link: https://github.com/thesofproject/sof/issues/10826
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260730085914.27546-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
