bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.
Fixes: 3991657ae7 ("block: set bip_vcnt correctly")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511215151.346228-1-devnexen@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver uses an initial IO to set the device to a default
state. That initialization is currently being done after the device
node has been created. That means that the single buffer used
for output can be altered while IO is in progress.
Move the intialization before announcement to user space.
Fixes: fac733f029 ("HID: force feedback support for SmartJoy PLUS PS2/USB adapter")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
New Infolevels for QUERY_DIR (and QUERY_INFO) levels 78 through 81 are
now being used by Windows clients and were added to the documentation.
Add defines for them (and correct some typos in documentation). See
MS-SMB2 2.2.33 and MS-FSCC 2.4
Signed-off-by: Steve French <stfrench@microsoft.com>
When copying plane color state in a joiner configuration, use the plane in
the primary joiner pipe since it carries the pipeline number selected by
the user-space.
This assumes that all pipes in the joiner are symmetric in their plane
color capabilities.
Cc: stable@vger.kernel.org # v6.19+
Fixes: a78f1b6baf ("drm/i915/color: Add framework to program CSC")
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260511053213.3122314-2-chaitanya.kumar.borah@intel.com
All the callers of mhi_ep_handle_syserr() except mhi_ep_process_cmd_ring()
are holding the 'state_lock' to avoid the race in setting the MHI state. So
do the same in mhi_ep_process_cmd_ring() for sanity.
Fixes: e827569062 ("bus: mhi: ep: Add support for processing command rings")
Cc: stable@vger.kernel.org # 5.18
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260302085612.18725-1-manivannan.sadhasivam@oss.qualcomm.com
The mhi_cntrl->mhi_state field should be protected by state_lock to
ensure atomic state transitions. However, mhi_ep_power_up() access
mhi_state without holding this lock, which can race with concurrent state
transitions and lead to state corruption.
Add proper state_lock protection around mhi_state access.
Fixes: fb3a26b7e8 ("bus: mhi: ep: Add support for powering up the MHI endpoint stack")
Fixes: f7d0806bdb ("bus: mhi: ep: Add support for handling SYS_ERR condition")
Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260414-reset_worker_deadlock-v2-2-42fd682b45db@oss.qualcomm.com
There is a potential deadlock scenario in mhi_ep_reset_worker() where
the state_lock mutex is acquired twice in the same call chain:
mhi_ep_reset_worker()
mutex_lock(&mhi_cntrl->state_lock)
mhi_ep_power_up()
mhi_ep_set_ready_state()
mutex_lock(&mhi_cntrl->state_lock) <- Deadlock
Fix this by releasing the state_lock before calling mhi_ep_power_up().
The lock is only needed to protect current MHI state read operation. The
lock can be safely released before proceeding with the power up sequence.
Fixes: 7a97b6b473 ("bus: mhi: ep: Add support for handling MHI_RESET")
Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260414-reset_worker_deadlock-v2-1-42fd682b45db@oss.qualcomm.com
Add a clock operation to get the whole set of rates available to a specific
clock: when needed this request could transparently trigger a full rate
discovery enumeration if this specific clock-rates were previously only
lazily enumerated.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://patch.msgid.link/20260508153300.2224715-16-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Lazy discovery of discrete rates works as follows:
A. Grab the first three rates,
B. Grab the last rate, if there are more than three rates.
It is up to the SCMI provider implementation to decide how many rates
are returned in response to a single CLOCK_DESCRIBE_RATES command. Each
rate received is stored in the scmi_clock_rates.rates[] array, and
.num_rates is updated accordingly.
When more than 3 rates have been received after step A, the last rate
may have been received already, and stored in scmi_clock_rates.rates[]
(which has space for scmi_clock_desc.tot_rates entries). Hence grabbing
the last rate again will store it a second time, beyond the end of the
array.
Fix this by only grabbing the last rate when we don't already have it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://patch.msgid.link/20260508153300.2224715-15-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Clock rates are guaranteed to be returned in ascending order for SCMI clock
protocol versions greater than 1.0: in such a case, use bounded iterators
to minimize the number of message exchanges needed to discover min and max
rate.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://patch.msgid.link/20260508153300.2224715-14-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The documentation speaks of the "iter_response_bound_cleanup()" protocol
helper, while the actual helper is called "iter_response_cleanup()".
Settle on the former name, because the helper is only needed when using
bound-iterators.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260508153300.2224715-13-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
When using a bound-iterator with an upper bound, commands are sent, and
responses are received, until the upper bound is reached. However, it
is up to the SCMI provider implementation to decide how many rates are
returned in response to a single CLOCK_DESCRIBE_RATES command. If the
last response contains rates beyond the specified upper bound, they are
still passed up for further processing. This may lead to buffer
overflows in unprepared callsites.
While the imprecise bound handling may have been intentional (it was
mentioned in the commit message introducing the code), it is still
confusing for users, and may cause hard to debug crashes. Fix this by
strictly enforcing the upper bound.
Note that this may cause an increase in the number of
CLOCK_DESCRIBE_RATES commands issued, as retrieving the last rate may no
longer be done inadvertentently, but require its own command.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260508153300.2224715-12-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
SCMI core stack provides some common helpers to handle in a unified way
multipart message replies: such iterator-helpers, when run, currently
process by default the whole set of discovered resources.
Introduce an alternative way to run the initialized iterator on a limited
range of resources.
Note that the subset of resources that can be chosen is anyway limited by
the SCMI protocol specification, since you are only allowed to choose the
start-index on a multi-part enumeration NOT the end-index, so that the
effective number of returned items by a bound iterators depends really
on platform side decisions.
Suggested-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-11-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Fix clock parents enumeration to account only for effectively discovered
parents during enumeration, avoiding to trust the total number of parents
declared upfront by the platform.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-9-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Only the unified interface exposing min_rate/max_rate is now used.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://patch.msgid.link/20260508153300.2224715-7-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Use the new min_rate and max_rate unified properties that provide the
proper values without having to consider the clock type.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-6-cristian.marussi@arm.com
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Introduce a new internal struct scmi_clock_desc so as to be able to hide,
in the future, some of the needlessly public fields currently kept inside
scmi_clock_info, while keeping exposed only the two new min_rate and
max_rate fields for each clock.
No functional change.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Use the Clock protocol layer determine_rate logic to calculate the closest
rate that can be supported by a specific clock.
No functional change.
Cc: Brian Masney <bmasney@redhat.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-4-cristian.marussi@arm.com
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Add a clock operation to help determining the effective rate, closest to
the required one, that a specific clock can support.
Calculation is currently performed kernel side and the logic is taken
directly from the SCMI Clock driver: embedding the determinate rate logic
in the protocol layer enables simplifications in the SCMI Clock protocol
interface and will more easily accommodate further evolutions where such
determine_rate logic into is optionally delegated to the platform SCMI
server.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
While the do_div() helper used for rounding expects its divisor argument
to be a 32bits quantity, the currently provided divisor parameter is a
64bit value that, as a consequence, is silently truncated and a possible
source of bugs.
Fix by using the proper div64_ul helper.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Fixes: 7a8655e19b ("clk: scmi: Fix the rounding of clock rate")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-2-cristian.marussi@arm.com
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
When an MHI device uses standard MSI, the PCI core requires the allocated
number of vectors to be a strict power of two. But devices will only ask
for the irqs they need, so they might not be properly aligned.
Make sure a power-of-2 number of vectors is requested.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/CACixm21q7b_diEx5COZxVZm9EhZ0hnakM_WBjEWcCsznfWeniw@mail.gmail.com
Jakub Kicinski says:
====================
net: shaper: fix various minor bugs
Fix various minor bugs in the net shaper API.
First 2 patches deal with ordering issues around inserting
and publishing new shapers. Shapers are inserted "tentatively"
and marked valid only after HW op succeeded, this used to
be slightly racy.
Only other patch of note is patch 8. We want to add a Netlink
policy check on the handle ID. This necessitates patch 7.
The rest are simple and self-explanatory.
v1: https://lore.kernel.org/20260506000628.1501691-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20260510192904.3987113-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_parse_handle() does not enforce that the user provides
the handle ID. For NODE the ID defaults to UNSPEC for all other
cases it defaults to 0.
For NETDEV 0 is the only option. For QUEUE defaulting to 0 makes
less intuitive sense. Specifically because the behavior should
(IMHO) be the same for all cases where there may be more than
one ID (QUEUE and NODE).
We should either document this as intentional or reject.
I picked the latter with no strong conviction.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NETDEV scope represents a singleton root shaper in the per-device
hierarchy. All code assumes NETDEV shapers have id 0:
net_shaper_default_parent() hardcodes parent->id = 0 when returning
the NETDEV parent for QUEUE/NODE children, and the UAPI documentation
describes NETDEV scope as "the main shaper" (singular, not plural).
Make sure we reject non-0 IDs.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_parse_handle() reads the user-supplied handle ID via
nla_get_u32(), accepting the full u32 range. However, the xarray key
is built by net_shaper_handle_to_index() using
FIELD_PREP(NET_SHAPER_ID_MASK, handle->id), where NET_SHAPER_ID_MASK
is GENMASK(25, 0) - only 26 bits wide. FIELD_PREP silently masks off
the upper bits at runtime. A user-supplied NODE id like 0x04000123
becomes id 0x123.
Additionally, a user-supplied id equal to NET_SHAPER_ID_UNSPEC
(0x03FFFFFF, which is NET_SHAPER_ID_MASK itself) would collide with
the sentinel used internally by the group operation to signal
"allocate a new NODE id".
Reject user-supplied IDs >= NET_SHAPER_ID_MASK (i.e., >= 0x03FFFFFF)
in the policy.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using definitions in kernel policies is awkward right now.
On one hand we want defines for max values and such.
On the other we don't have a way of adding kernel-only defines.
Adding unnecessary defines to uAPI is a bad idea, we won't
be able to delete them. And when it comes to policy user
space should just query it via the policy dump, not use
hard coded defines.
Add a "scope" property to definitions, which will let us tell
the codegen that a definition is for kernel use only. Support
following values:
- uapi: render into the uAPI header (default, today's behavior)
- kernel: render to kernel header only
- user: same as kernel but for the user-side generated header
Definitions may have a header property (definition is "external",
provided by existing header). Extend the scope to headers, too.
If definition has both scope and header properties we will only
generate the includes in the right scope.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_group_send_reply() writes both the NET_SHAPER_A_IFINDEX
attribute (via net_shaper_fill_binding()) and the nested
NET_SHAPER_A_HANDLE attribute (via net_shaper_fill_handle()), but
the reply skb at the call site in net_shaper_nl_group_doit() is
allocated using net_shaper_handle_size(), which only accounts for
the nested handle.
The allocation is therefore short by nla_total_size(sizeof(u32))
(8 bytes) for the IFINDEX attribute. In practice the slab allocator
rounds up the small allocation so the bug is latent, but the size
accounting is wrong and could bite if the reply grew further.
Introduce net_shaper_group_reply_size() that accounts for the full
reply payload and use it both at the genlmsg_new() call site and in
the defensive WARN_ONCE message.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
genlmsg_new() alloc failure path in net_shaper_nl_group_doit() forgets
to set ret before jumping to error handling.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The usual way of inserting entries which are not yet fully ready
into XArray is to have a VALID flag. The shaper code has a NOT_VALID
flag. Since XArray code does not let us create entries with marks
already set - the creation of entries is currently not atomic.
Flip the polarity of the VALID flag. This closes the tiny race
in net_shaper_pre_insert() of entries being created without
the NOT_VALID flag.
Fixes: 93954b40f6 ("net-shapers: implement NL set and delete operations")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ath10k_wmi_cmd_send(), the current code detects ATH10K_STATE_WEDGED
and sets ret to -ESHUTDOWN, but still proceeds to transmit pending
beacons and calls ath10k_wmi_cmd_send_nowait().
This can lead to incorrect behavior, as WMI commands and beacons are
still sent after the device has been marked as wedged, and the original
-ESHUTDOWN return value may be overwritten by the result of the send
path.
The wedged state indicates the hardware is already unreliable, and no
further interaction with firmware is expected or meaningful in this
state.
Fix this by skipping beacon transmission and the WMI send path entirely
once ATH10K_STATE_WEDGED is detected, ensuring consistent return values
and avoiding unnecessary firmware interaction.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
Fixes: c256a94d1b ("wifi: ath10k: shutdown driver when hardware is unreliable")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428061737.37-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This is similar to what was fixed by previous patches. We have a call
to ath11k_wmi_cmd_send() which does check the return value, but forgot
to free the related skb on error.
Fixes: b43310e44e ("wifi: ath11k: factory test mode support")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506134240.2284016-4-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This is the same pattern that was previously identified as problematic:
direct 'return ath11k_wmi_cmd_send(...)' will leak the skb in the error
path if it is not explicitly handled.
Fixes: c417b247ba ("ath11k: implement hardware data filter")
Fixes: 9cbd7fc9be ("ath11k: support MAC address randomization in scan")
Fixes: ba9177fcef ("ath11k: Add basic WoW functionalities")
Fixes: fec4b898f3 ("ath11k: Add WoW net-detect functionality")
Fixes: c3c36bfe99 ("ath11k: support ARP and NS offload")
Fixes: a16d9b50cf ("ath11k: support GTK rekey offload")
Fixes: 652f69ed9c ("ath11k: Add support for SAR")
Fixes: 0f84a156aa ("ath11k: Handle keepalive during WoWLAN suspend and resume")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506134240.2284016-3-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix two instances where we used to directly return the result of
ath11k_wmi_cmd_send(...). Because we did not check the return value, we
also did not free the skb in the error path.
Fixes: 79802b13a4 ("ath11k: implement WoW enable and wakeup commands")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The legacy ARM board file for MACH_MX31ADS was removed in commit
c93197b004 ("ARM: imx: Remove i.MX31 board files"), but a reference
to it remained in the cs89x0 driver. Drop this unused code.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Fixes: c93197b004 ("ARM: imx: Remove i.MX31 board files")
Link: https://patch.msgid.link/20260509023732.42256-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Exit the for_each_set_bit() loop in cs35l56_make_tdm_config_word() after
all possible channel shifts have been done. This prevents going around
the loop with out-of-range shift values, which is technically undefined
behaviour. It also shuts up code analysis tools.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260512123126.260148-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Walleij says:
====================
net: ethernet: cortina: Fix various RX bugs
During review of a minor patch for a bug in the Cortina
ethernet driver, Sashiko jumped in and pointed out a number
of nasty bugs.
This series hopefully fixes all of them.
Signed-off-by: Linus Walleij <linusw@kernel.org>
====================
Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-0-6c5d20ddc35b@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The gmac_rx() NAPI poll function assembles packets in an
SKB from a ring buffer.
If the ring buffer gets completely emptied during a poll cycle,
we exit gmac_rx(), but the packet is not yet completely
assembled in the SKB, yet the fragment counter frag_nr is
reset to zero on the next invocation.
Solve this by making the RX fragment counter a part of the
port struct, and carry it over between invocations.
Reset the fragment counter only right after calling
napi_gro_frags(), on error (after calling napi_free_frags())
or if stopping the port.
Reset it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-3-6c5d20ddc35b@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-2-6c5d20ddc35b@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a shutdown handler for the AMD MDB PCIe host controller that
asserts the PERST# signal via GPIO before the system powers off or
reboots. This ensures the connected PCIe endpoint is held in reset
during shutdown.
Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
[mani: removed conditional check since GPIO APIs return safely if desc is NULL]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260427121227.290604-1-sai.krishna.musham@amd.com
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer on later probe errors or driver
unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: e79e7c2df6 ("spi: ep93xx: add DT support for Cirrus EP93xx")
Link: https://sashiko.dev/#/patchset/20260429091333.165363-1-johan%40kernel.org?part=10
Cc: stable@vger.kernel.org # 6.12
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://patch.msgid.link/20260512074849.915143-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
David Howells <dhowells@redhat.com> says:
Here are the outstanding miscellaneous fixes for netfslib gathered together
and with some fixes-to-fixes folded down and one rearrangement. Various
Sashiko review comments[1][2][3][4][5] are addressed:
(1) Fix subrequest cancellation cleanup in DIO read and single-read.
(2) Fix missing locking around retry adding new subrequests.
(3) Fix read and write result collection to use barriering correctly to
access a request's subrequest lists without taking a lock.
This adds list_add_tail_release() and
list_first_entry_or_null_acquire() to appropriate incorporate
barriering into some list functions.
(4) Fix netfs_read_to_pagecache() to pause on subrequest I/O failure.
(5) Fix the potential for 64-bit tearing on a 32-bit machine when reading
netfs_inode->remote_i_size and ->zero_point by using much the same
mechanism as is used for ->i_size.
(6) Fix the calculation of zero_point in netfs_release_folio() to limit it
to ->remote_i_size, not ->i_size.
(7) Fix triggering of a VM_BUG_ON_FOLIO() in netfs_write_begin().
(8) Fix a potentially uninitialised error value in
netfs_extract_user_iter().
(9) Fix error handling in netfs_extract_user_iter().
(10) Fix overrun checking in netfs_extract_user_iter().
(11) Fix netfs_invalidate_folio() to clear the folio dirty bit if all dirty
data removed.
(12) Defer the emission of trace_netfs_folio() in netfs_perform_write().
This allows the next patch to emit the correct traces.
(13) Fix the handling of a partially failed copy (ie. EFAULT) into a
streaming write folio. Also remove the netfs_folio if a streaming
write folio is entirely overwritten.
(14) Fix a potential deadlock in writethrough writing.
(15) Fix netfs_read_gaps() to remove the netfs_folio from a filled folio.
(16) Fix netfs_perform_write() to not disable streaming writes when writing
to an fd that's open O_RDWR.
(17) Fix an early put of the sink page used in netfs_read_gaps(), before
the request has completed.
(18) Fix request leak in netfs_write_begin() error handling.
(19) Fix a potential UAF in netfs_unlock_abandoned_read_pages() due to
trying to check index of each folio we're abandoning to see if that
folio is actually owned by the caller (in which case, we're not
actually allowed to dereference it).
(20) Fix incorrect adjustment of dirty region when partially invalidating a
streaming write folio.
(21) Fix the handling of folio->private in netfs_perform_write() and the
attached netfs_folio and/or group when a streaming write folio is
modified.
(22) Fix netfs_read_folio() to wait on writeback first (it holds the folio
lock) otherwise we aren't allowed to look at the netfs_folio struct as
that could be modified at any time by the writeback collector.
(23) Fix write skipping in dir/symlink writepages.
(24) Fix the locking used by afs_get_link().
[1] https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
[2] https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com
[3] https://sashiko.dev/#/patchset/20260425125426.3855807-1-dhowells%40redhat.com
[4] https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com
[5] https://sashiko.dev/#/patchset/20260428131756.922303-1-dhowells%40redhat.com
* patches from https://patch.msgid.link/20260512123404.719402-1-dhowells@redhat.com: (24 commits)
afs: Fix the locking used by afs_get_link()
netfs, afs: Fix write skipping in dir/link writepages
netfs: Fix netfs_read_folio() to wait on writeback
netfs: Fix folio->private handling in netfs_perform_write()
netfs: Fix partial invalidation of streaming-write folio
netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages()
netfs: Fix leak of request in netfs_write_begin() error handling
netfs: Fix early put of sink folio in netfs_read_gaps()
netfs: Fix write streaming disablement if fd open O_RDWR
netfs: Fix read-gaps to remove netfs_folio from filled folio
netfs: Fix potential deadlock in write-through mode
netfs: Fix streaming write being overwritten
netfs: Defer the emission of trace_netfs_folio()
netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone
netfs: Fix overrun check in netfs_extract_user_iter()
netfs: fix error handling in netfs_extract_user_iter()
netfs: Fix potential uninitialised var in netfs_extract_user_iter()
netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call
netfs: Fix zeropoint update where i_size > remote_i_size
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
...
Link: https://patch.msgid.link/20260512123404.719402-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache.
Fixes: eae9e78951 ("afs: Use netfslib for symlinks, allowing them to be cached")
Fixes: 6698c02d64 ("afs: Locally initialise the contents of a new symlink on creation")
Closes: https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-25-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix netfs_write_single() and afs_single_writepages() to better handle a
write that would be skipped due to lock contention and WB_SYNC_NONE by
returning 1 from netfs_write_single() if it skipped and making
afs_single_writepages() skip also. If a skip occurs, the inode must be
re-marked as the VFS may have cleared the mark.
This is really only theoretical for directories in netfs_write_single() as
the only path to that is through afs_single_writepages() that takes the
->validate_lock around it, thereby serialising it.
Fixes: 6dd8093661 ("afs: Use netfslib for directories")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-24-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
