A session bound to an additional connection is stored in the session
channel list, but it is not added to that connection's local session table.
After the binding exchange completes, conn->binding is cleared.
A later SESSION_SETUP reauthentication on the bound channel only searches
the local session table. It fails to find the session and returns
STATUS_USER_SESSION_DELETED instead of processing authentication and
returning STATUS_LOGON_FAILURE for invalid credentials.
If the local lookup fails, look up the session globally and accept it only
when the current connection is registered in its channel list. This keeps
unbound connections from using the session while allowing reauthentication
on an established channel.
This fixes smb2.session.bind_invalid_auth.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a signed request uses a session that is not registered on the
connection, ksmbd returns STATUS_USER_SESSION_DELETED before reaching the
normal response signing path. The response therefore lacks
SMB2_FLAGS_SIGNED.
Clients that require signing check this flag before handling
STATUS_USER_SESSION_DELETED and replace the server status with
STATUS_ACCESS_DENIED when it is absent. The protocol permits this error
response to skip signature verification because the connection has no
matching session key.
Preserve SMB2_FLAGS_SIGNED on the early error response when the request was
signed. This lets the client propagate STATUS_USER_SESSION_DELETED.
It fixes smb2.session.bind2.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
FILE_ALLOCATION_INFORMATION can call vfs_fallocate(). If the allocation
cannot be satisfied, vfs_fallocate() returns -ENOSPC.
smb2_set_info() did not map -ENOSPC, so ksmbd returned a generic SMB error
and the client reported EIO instead of ENOSPC. This makes the ENOSPC step
in xfstests generic/213 fail.
Map -ENOSPC and -EFBIG to STATUS_DISK_FULL in the SET_INFO error path.
Tested with xfstests generic/213 on ksmbd.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows reports automatic write-time updates with a resolution of roughly
15 milliseconds. If a file is written and closed within that interval, a
close response requesting full information can report the write time from
the open rather than the filesystem's finer-grained mtime update.
ksmbd currently converts the filesystem mtime directly in SMB2 CLOSE, so
even a sub-millisecond write is visible to the client. This makes
smb2.timestamp_resolution.resolution1 fail because the immediate write
changes LastWriteTime.
Save the write time returned by SMB2 CREATE in the file handle. When CLOSE
requests post-query attributes, coalesce a positive mtime change smaller
than 15 milliseconds to that saved value. Larger changes remain visible,
including the test's write after a 20 millisecond delay.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A signed multichannel SESSION_SETUP binding request can require multiple
authentication rounds. ksmbd excludes SESSION_SETUP from the signed
request check and tries to sign every binding response with the channel
signing key. The channel does not exist for
STATUS_MORE_PROCESSING_REQUIRED, so that response is sent unsigned.
Clients reject it with STATUS_ACCESS_DENIED.
The final channel signing key also needs the key exported by the binding
authentication context. Keep that key in the channel instead of
overwriting the established session key, and use the session signing key
for intermediate and failed binding responses. Retain the binding session
reference until an error response has been signed and sent.
Limit a session to 32 channels while holding the channel lock. Return
STATUS_INSUFFICIENT_RESOURCES for an additional binding, matching the
server limit expected by clients.
This fixes smb2.multichannel.generic.num_channels, which previously
failed the first binding with STATUS_ACCESS_DENIED and returned the same
status instead of STATUS_INSUFFICIENT_RESOURCES for channel 33.
Fixes: f5a544e3ba ("ksmbd: add support for SMB3 multichannel")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
sid_to_id() currently treats the last subauthority of any owner or group
SID as a Unix uid or gid. For example, this maps Everyone (S-1-1-0) to
uid 0 and BUILTIN\Users (S-1-5-32-545) to gid 545.
When an SMB2 CREATE security descriptor contains those SIDs, ksmbd
attempts to change the newly created file to the bogus Unix ownership.
notify_change() then returns -EPERM, which makes smb2.create.aclfile fail
with NT_STATUS_SHARING_VIOLATION.
Validate the SID prefix before extracting its RID. Only server-domain
owner SIDs and S-1-22-2 Unix group SIDs have local ID representations.
Treat other valid Windows SIDs as unmapped so their original values can
still be preserved in the NT ACL xattr.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking
that the fixed field is actually present in the received frame.
Validate the deauth frame length first and only then read the reason
code.
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612185042.66260-6-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When assoc_data->s1g is set and no AID Response element is present,
falling back to mgmt->u.assoc_resp.aid reads the non-S1G
association-response layout.
Keep the fallback for non-S1G only. If a successful S1G association
response omits the AID Response element, abandon the association
instead of proceeding with AID 0. Initialize aid to 0 for other S1G
responses so the later mask and logging flow keeps a defined value
without reading the non-S1G layout.
Fixes: 2a8a6b7c4c ("wifi: mac80211: handle station association response with S1G")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612152440.25955-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A PMSR request with an empty peers array is not a useful request and
weakens the cfg80211-to-driver contract by allowing start_pmsr() with
no target peer.
Reject empty peer lists before allocating the request object or calling
into the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133717.93783-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR FTM location request flags are syntactically valid, but they must
be rejected when the device capability does not advertise support for
them.
Return an error immediately after rejecting unsupported LCI or civic
location request bits so the request cannot reach the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133710.93544-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133703.93274-2-enderaoelyther@gmail.com
[drop unnecessary check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR request parsing accepts missing or duplicated measurement type
entries in NL80211_PMSR_REQ_ATTR_DATA.
Track whether one measurement type was already provided, reject a
second one immediately, and return an error if the request data block
contains no measurement type at all.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133656.92900-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MBSSID transmitted-profile link IDs are valid only in the range
0..IEEE80211_MLD_MAX_NUM_LINKS - 1. Constrain the nl80211 policy to
reject out-of-range values during attribute validation.
Fixes: 37523c3c47 ("wifi: nl80211: add link id of transmitted profile for MLO MBSSID")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612131854.43575-4-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate each nested NL80211_ATTR_MBSSID_ELEMS entry as a well-formed
information-element stream before storing it for beacon construction.
RNR parsing already validates each nested blob with validate_ie_attr()
before storing it. Apply the same syntactic IE validation to MBSSID
entries before counting and copying their data and length pointers.
Fixes: dc1e3cb8da ("nl80211: MBSSID and EMA support in AP mode")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612131854.43575-3-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
Fixes: 0f48b8b88a ("wifi: ieee80211: add definitions for multi-link element")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260611173506.36838-2-enderaoelyther@gmail.com
[remove now misleading comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_inform_bss_frame_data() parses S1G beacons with the extension
frame layout, but still reads the TSF from the regular probe response
layout after the S1G branch. For S1G beacons that reads bytes at the
regular management-frame timestamp offset instead of the S1G timestamp.
Use the 32-bit S1G beacon timestamp and the S1G Beacon Compatibility
element's TSF completion field when informing an S1G BSS. Keep the
regular management-frame timestamp read in the non-S1G branch.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Tested-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260611161943.91069-6-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer.
Fixes: 09a740ce35 ("mac80211: receive and process S1G beacons")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260611161943.91069-5-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error.
Fixes: dbbb27e183 ("cfg80211: support RNR for EMA AP")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260610112208.1308-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_prepare_beacon() copies the mac80211 beacon frame after
FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller
than MAX_MGMT_PKT_SIZE after alignment.
Validate the beacon length against the actual tailroom before the copy
and skb_put(). Leave ownership of the management skb with the caller on
error, matching the existing rsi_send_beacon() cleanup path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705084824.68105-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in
both the software-decrypt key selection path and the hardware-decrypted
IV/ICV strip path. In both places the existing guard only checks
skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the
byte at hdrlen + 3.
Require hdrlen + 4 bytes before reading that item in both paths. This is
a local source-boundary check only; it does not change the key index
semantics.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705083519.23567-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_send_bgscan_probe_req() allocates room for struct
rsi_bgscan_probe plus MAX_BGSCAN_PROBE_REQ_LEN bytes, but copies the
entire mac80211-generated probe request skb after the fixed header.
The probe request length depends on scan IEs and is not checked
against the fixed firmware buffer.
Reject generated probe requests that do not fit the firmware command
buffer before copying them into the skb.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011231.45593-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011140.37639-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
I have an hostapd setup with a
01:00.0 Network controller: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
The setup work fine on 6.18.26-gentoo
It breaks on 6.18.33-gentoo (and still broken on 6.18.37)
I found an hint in dmesg:
On 6.18.26-gentoo I see:
May 31 15:48:45 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
On 6.18.33-gentoo I see:
May 31 15:22:57 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0006 detected
The RF chipset seems badly detected.
The problem was the EEPROM which was badly initialized.
Probably the origin was in some PCI change but unfortunately I couldn't play
to bisect/reboot often the board with this card to do it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260703134932.3786771-1-clabbe@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down().
Fixes: 6dccbc9f3e ("wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703082523.2629324-1-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed.
Cc: stable@vger.kernel.org
Fixes: 61dcfa8c2a ("wifi: cfg80211: copy multi-link element from the multi-link probe request's frame body to the generated elements")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Link: https://patch.msgid.link/20260701093327.2680709-1-lihaofeng@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and
data[24] whenever key data is present. Those offsets are only part of
the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as
CCMP, do not provide those bytes, so the unconditional copies can read
past the supplied key buffer.
Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are
shorter than the expected 32-byte layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260701053414.34015-1-pengpeng@iscas.ac.cn
[drop useless length check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying.
Fixes: 7cb770729b ("p54: move eeprom code into common library")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260628000510.4152481-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain.
Fixes: c71420db65 ("wifi: mac80211: RCU-ify link STA pointers")
Link: https://lore.kernel.org/r/20260626080158.3589711-1-maoyixie.tju@gmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260627083028.3826810-1-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_build_hdr() stores an ACK status frame before it has
finished all validation and header construction. If a later error path
is taken, the transmit skb is freed but the stored ACK status frame
remains in local->ack_status_frames.
This can happen for control port frames when the requested MLO link ID
does not match the link selected for a non-MLO station. Repeated
failures can fill the ACK status IDR and leave pending ACK frames until
hardware teardown.
Remove any stored ACK status frame before returning an error after it
has been inserted into the IDR.
Fixes: a729cff8ad ("mac80211: implement wifi TX status")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9de0423da840e92084915b8f92e66a421245c4b8.1782462409.git.roxy520tt@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Injected HT and VHT rates store an MCS value in rates[0].idx rather
than an index into the legacy bitrate table. hwsim nevertheless passes
these rates to ieee80211_get_tx_rate() while generating monitor frames
and timestamps.
A crafted injected frame can therefore read beyond the bitrate table.
If the resulting bitrate is zero, mac80211_hwsim_write_tsf() also
divides by zero, as observed by syzbot.
Use ieee80211_get_tx_rate() only for legacy rates. The existing fallback
continues to supply a conservative bitrate where hwsim does not yet
calculate MCS rates.
Reported-by: syzbot+21629c14aa749636db9d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=21629c14aa749636db9d
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628002537.23550-1-alhouseenyousef@gmail.com
[drop wrong Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed.
Fixes: 1dfba3060f ("libertas: move firmware lifetime handling to firmware.c")
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260624085343.575508-1-dawei.feng@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d0 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed.
Fixes: 06b16ae531 ("libertas_tf: main.c, data paths and mac80211 handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178211481807.2212567.8773346114561900100@maoyixie.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Fixes: 3b1c256eb4 ("wifi: mac80211: fixes in FILS discovery updates")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260621093532.884188-2-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old
template before allocating the replacement. If the kzalloc() then fails,
it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points
at the object already queued for freeing. A later update or AP teardown
re-queues that same rcu_head; the second free is caught by KASAN when the
RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800d06f300 by task exploit/145
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-128 of size 128
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Fixes: 3b1c256eb4 ("wifi: mac80211: fixes in FILS discovery updates")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260621093532.884188-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by
the device straight to skb_put() on a fixed-size receive skb. A backend
reporting a length larger than the skb tailroom drives skb_put() past the
buffer end and hits skb_over_panic() -- a host-triggerable guest panic
(denial of service).
Clamp the length to the skb's available room before skb_put(). A
conforming device never reports more than the posted buffer size, so valid
frames are unaffected; a truncated over-report then fails the
length/header checks in hwsim_virtio_handle_cmd() and is dropped, so
truncating rather than dropping here cannot be turned into a parsing
problem.
Fixes: 5d44fe7c98 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260620-b4-disp-474bee37-v1-1-1a4d37f3e2d4@proton.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline.
Fixes: 2c86c27501 ("Add ipw2100 wireless driver.")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260620065242.93798-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Fixes: 807f8a8c30 ("cfg80211/nl80211: add support for scheduled scans")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260619162542.3878296-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting.
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/AB8D5E603E6EA856+ae5f622a-dd3a-4e38-bdd2-42276ae0e1a8@smail.nju.edu.cn/
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.5
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_lookup_inode_by_name() returns MFT references read from directory
index entries on disk. These values are untrusted, but the function can
currently return an error-marked MFT reference to its callers without
validating it.
Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image
can set the MREF error bit while leaving the low bits as an arbitrary
value, causing callers to consume a bogus pseudo-errno instead of treating
the lookup result as corrupted on-disk metadata.
Fix this at the source by normalizing every error-marked MFT reference
returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to
all four directory lookup return paths so every caller gets a validated
result without needing additional checks or an API change.
This keeps the sanitization in the common lookup helper, which is cleaner
than duplicating validation in each caller.
Fixes: 1e9ea7e044 ("Revert "fs: Remove NTFS classic"")
Cc: stable@vger.kernel.org
Reported-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_non_resident_attr_insert_range() allocates hole_rl before mapping the
whole runlist. If ntfs_attr_map_whole_runlist() fails, the error path drops
ni->runlist.lock and returns without freeing hole_rl. This leaks memory
of sizeof(*hole_rl) * 2 bytes.
Fix this memory leak by freeing hole_rl before returning from
that error path, matching the later error paths in the same function.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write()
returns an error, intending to restore the buffer after a failed write.
However, ntfs_ib_write() returns an error immediately if
pre_write_mst_fixup() validation fails. The caller,
ntfs_icx_ib_sync_write(), interprets any error as a write failure
requiring rollback. It does not differentiate between I/O errors and
validation failures, and calls post_write_mst_fixup() anyway.
Since post_write_mst_fixup() assumes that the index_block contents is
correct, it doesn't perform the boundary checks, which results in
out-of-bounds memory access.
An attacker can craft a malicious NTFS image with:
- large index_block.usa_ofs offset, pointing outside the ntfs_record
- index_block.usa_count = 0, causing integer underflow
- or index_block.usa_count larger than actual number of sectors in the
ntfs_record, causing out-of-bounds access
KASAN reports describing the memory corruption:
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0
Read of size 2 at addr ffff8881586c9018 by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x19c/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x19c/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x19c/0x1d0
post_write_mst_fixup+0x19c/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0
Write of size 2 at addr ffff8881586c91fe by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x1aa/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x1aa/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x1aa/0x1d0
post_write_mst_fixup+0x1aa/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
Let's move the post_write_mst_fixup() call to ntfs_ib_write().
The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning.
If the index_block contents is invalid, pre_write_mst_fixup() fails and
ntfs_ib_write() returns early without calling post_write_mst_fixup() on
bad index_block.
Fixes: 0a8ac0c1fa ("ntfs: update directory operations")
Cc: stable@vger.kernel.org
Signed-off-by: Valeriy Yashnikov <yashnikov.valeriy@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When ntfs_map_runlist_nolock() needs to look up the attribute extent
containing a target VCN (ctx_needs_reset == true), it calls
ntfs_attr_lookup() and then expects the result to be a non-resident
attribute, since only non-resident attributes have a mapping pairs
array to decompress.
A crafted NTFS image can place a resident attribute where a non-resident
one is expected, causing ntfs_attr_lookup() to succeed but return a
resident attribute record. Previously this was caught only by a
WARN_ON(), which does not stop execution. The code then falls through to
read a->data.non_resident.highest_vcn from what is actually a resident
attribute, accessing the wrong union member and corrupting the VCN range
check.
The caller path triggering this warning during mount is:
ntfs_map_runlist_nolock
ntfs_empty_logfile
load_system_files
ntfs_fill_super
In this path ctx is NULL, so ntfs_map_runlist_nolock() allocates a
temporary search context internally and sets ctx_needs_reset = true.
The existing resident-attribute guard in the ctx != NULL branch already
returns -EIO silently for the same condition; make the ctx_needs_reset
path consistent by replacing the WARN_ON() with the same -EIO error
return.
This causes the crafted image to be rejected with a mount error instead
of triggering a kernel warning.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Cc: stable@vger.kernel.org
Reported-by: Sangho Lee <kudo3228@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
An attribute-list update performed while allocating clusters can drop the
last reference to the temporary attribute inode. Evicting that inode
drops its reference to the base inode and can invoke ntfs_drop_big_inode()
for the base inode from within the base inode's own writeback path.
If the base inode is unlinked, ntfs_drop_big_inode() calls
truncate_setsize(), which waits for the inode's folio writeback to
complete. The same writeback worker is responsible for completing that
writeback, so it waits for itself indefinitely.
Prevent this self-deadlock by grabbing a reference to the base inode at the
beginning of ntfs_writepages() and releasing it at the end of the function.
This defers eviction until all bios have been submitted, allowing the wait
for folio writeback to complete safely.
Fixes: b041ca5625 ("ntfs: update iomap and address space operations")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When a system file such as $Bitmap is exposed via show_sys_files and
written from userspace, the volume is corrupted and, because the cluster
allocator scans $Bitmap through the same inode's page cache, a write to
$Bitmap also deadlocks writeback against the folio it already holds locked.
These files are maintained by the driver itself and have no valid reason
to be written through the file interface. Mark base metadata files
(mft_no < FILE_first_user) as immutable during inode read so the VFS
rejects write, mmap, truncate and unlink with -EPERM. Directories are
skipped so the root and $Extend remain usable. Internal metadata updates
do not go through the VFS write path and are unaffected.
Fixes: af0db57d42 ("ntfs: update inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
amt_get_size() incorrectly used sizeof(struct iphdr) for the sizes of
IFLA_AMT_DISCOVERY_IP, IFLA_AMT_REMOTE_IP, and IFLA_AMT_LOCAL_IP.
These attributes contain IPv4 addresses (__be32), not full IP headers.
Replace sizeof(struct iphdr) with sizeof(__be32) to avoid over-allocating
netlink message space.
Fixes: b9022b53ad ("amt: add control plane of amt interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701122329.3562825-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done.
Fixes: d7b0e37c1a ("net/smc: restructure CDC message reception")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260630183227.2044998-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260701161912.125355-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Suggested-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630174110.2003121-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=5f46
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*, all
for ancient problems. Patch 7 raised drive-by sashiko findings,
but those are not related to the change itself.
1) Rebuild the nf_nat_sip data pointer to prevent stale access after SKB
reallocation. Restrict UDP mangling to UDP streams to avoid TCP packet
corruption.
2) Prevent undefined behavior in xt_u32 caused by invalid shift counts.
From Wyatt Feng.
3) Use u64 variables to prevent incorrect comparisons on links exceeding
34 Gbps in xt_rateest. From Feng Wu.
4) Cap the number of expectations per master during nfnetlink_cthelper
updates. From Pablo Neira Ayuso.
5) Mark malformed IPv6 extension headers for hotdrop in ip6tables.
From Zhixing Chen.
6) Skip the end element of an open interval during the get command when its
closest match is the interval's start element. Also from Pablo Neira Ayuso.
7) Fix PMTU calculation for GUE/GRE tunnels in IPVS during ICMP fragmentation
error handling. Include additional tunnel header length when computing the
new MTU. From Yizhou Zhao.
8) Reset full ip_vs_seq structures in ip_vs_conn_new. Also from Yizhou Zhao.
9) Reject invalid shift parameters in xt_connmark. Also from Wyatt Feng.
netfilter pull request nf-26-07-03
* tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_connmark: reject invalid shift parameters
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
ipvs: fix PMTU for GUE/GRE tunnel ICMP errors
netfilter: nft_set_rbtree: get command skips end element with open interval
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master on updates
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
netfilter: xt_u32: reject invalid shift counts
netfilter: nf_nat_sip: reload possible stale data pointer
====================
Link: https://patch.msgid.link/20260703125709.16493-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
