f2fs_update_inode() reads inode->i_blocks without holding i_lock to
serialize it to the on-disk inode, while concurrent truncate or
allocation paths may modify i_blocks under i_lock. Since blkcnt_t is
u64, this risks torn reads on 32-bit architectures.
Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent
potential compiler-induced tearing.
Fixes: 19f99cee20 ("f2fs: add core inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The ri parameter in truncate_partial_nodes() is unused. Remove it along
with the related code. No logical changes.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a
file, and then merges contiguous mappings into extents. If the mapping
is found in the read extent cache, node blocks do not need to be read.
However, in the following scenario, a contiguous extent can be split
into two extents:
$ dd if=/dev/zero of=data.128M bs=1M count=128
$ losetup -f data.128M
$ mkfs.f2fs /dev/loop0 -f
$ mount -o mode=lfs /dev/loop0 /mnt/f2fs/
$ cd /mnt/f2fs/
$ dd if=/dev/zero of=data.72M bs=1M count=72 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=4 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync
$ echo 3 > /proc/sys/vm/drop_caches
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ f2fs_io fiemap 0 1024 data.4M
Fiemap: offset = 0 len = 1024
logical addr. physical addr. length flags
0 0000000000000000 0000000006400000 0000000000200000 00001000
1 0000000000200000 0000000006600000 0000000000200000 00001001
Although the physical addresses of the ranges 0~2MB and 2M~4MB are
contiguous, the mapping for the 2M~4MB range is not present in memory.
When the physical addresses for the 0~2MB range are updated, no merge
happens because the adjacent mapping is missing from the in-memory
cache. As a result, fiemap reports two separate extents instead of a
single contiguous one.
The root cause is that the read extent cache does not guarantee that all
blocks of an extent are present in memory. Therefore, when the extent
length returned by f2fs_map_blocks_cached() is smaller than maxblocks,
the remaining mappings are retrieved via f2fs_get_dnode_of_data() to
ensure correct fiemap extent boundary handling.
Cc: stable@kernel.org
Fixes: cd8fc5226b ("f2fs: remove the create argument to f2fs_map_blocks")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent
cache, map->m_multidev_dio is not updated, which leads to incorrect
multidevice information being reported by trace_f2fs_map_blocks().
This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when
the read extent cache is hit.
Cc: stable@kernel.org
Fixes: 0094e98bd1 ("f2fs: factor a f2fs_map_blocks_cached helper")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Cc: stable@vger.kernel.org
Signed-off-by: George Saad <geoo115@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The sbi parameter in f2fs_in_warm_node_list() is not used. Remove it to
simplify the function.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition.
Cc: stable@kernel.org
Fixes: 50fa53eccf ("f2fs: fix to avoid broken of dnode block list")
Reported-by: syzbot+6e4cb1cac5efc96ea0ca@syzkaller.appspotmail.com
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_hook+0x58c/0x5ec
prep_new_page+0x34/0x284
get_page_from_freelist+0x2dcc/0x2e8c
__alloc_pages_noprof+0x280/0x76c
__folio_alloc_noprof+0x18/0xac
__filemap_get_folio+0x6bc/0xdc4
pagecache_get_page+0x3c/0x104
do_garbage_collect+0x5c78/0x77a4
f2fs_gc+0xd74/0x25f0
gc_thread_func+0xb28/0x2930
kthread+0x464/0x5d8
ret_from_fork+0x10/0x20
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1563!
folio_end_read+0x140/0x168
f2fs_finish_read_bio+0x5c4/0xb80
f2fs_read_end_io+0x64c/0x708
bio_endio+0x85c/0x8c0
blk_update_request+0x690/0x127c
scsi_end_request+0x9c/0xb8c
scsi_io_completion+0xf0/0x250
scsi_finish_command+0x430/0x45c
scsi_complete+0x178/0x6d4
blk_mq_complete_request+0xcc/0x104
scsi_done_internal+0x214/0x454
scsi_done+0x24/0x34
which is similar to the problem reported by syzbot:
https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc
This case is consistent with the description in commit 9bf1a3f
("f2fs: avoid GC causing encrypted file corrupted"):
Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after
being written it is marked as uptodate. Then, Page 1 is moved from blkaddr
B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by
ra_data_block.
There is no need to read Page 1 again from blkaddr B, since it has already
been updated. Therefore, avoid initiating I/O in this case.
Fixes: 6aa58d8ad2 ("f2fs: readahead encrypted block during GC")
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add the defrag_blocks sysfs node to track
the amount of data blocks moved during filesystem
defragmentation.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When `fileinfo->fi_flags` does not have the `FIEMAP_FLAG_SYNC` bit set
and inline data has not been persisted yet, the physical address of the
extent is calculated incorrectly for unwritten inline inodes.
root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1
root@vm:/mnt/f2fs# f2fs_io fiemap 0 100 data.3k
Fiemap: offset = 0 len = 100
logical addr. physical addr. length flags
0 0000000000000000 00000ffffffff16c 0000000000000c00 00000301
This patch fixes the issue by checking if the inode's address is valid.
If the inline inode is unwritten, set the physical address to 0 and
mark the extent with `FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC`
flags.
Cc: stable@kernel.org
Fixes: 67f8cf3cee ("f2fs: support fiemap for inline_data")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During the f2fs_get_victim process, when the f2fs_need_rand_seg is enabled in select_policy,
p->offset is a random value, and the search range is from p->offset to MAIN_SECS.
When segno >= last_segment, the loop breaks and exits directly without searching
the range from 0 to p->offset.This results in an incomplete search when the random
offset is not zero.
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since commit 52e7e0d889 ("fscrypt: Switch to sync_skcipher and
on-stack requests") eliminated the dynamic allocation of crypto
requests, the only remaining dynamic memory allocation done by
fscrypt_encrypt_pagecache_blocks() is the bounce page allocation.
The bounce page is allocated from a mempool. Mempool allocations with
GFP_NOFS never fail. Therefore, fscrypt_encrypt_pagecache_blocks() can
no longer return -ENOMEM when passed GFP_NOFS.
Remove the now-unreachable code from f2fs_encrypt_one_page().
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/d9dc2ee1-283d-4467-ad36-a6a4aa557589@suse.cz/
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The Onion Omega4 Evaluation Board is based on the RV1103B SoC and has:
- 256 MB of RAM
- 256 MB of SPI-NAND
- Ethernet
- USB OTG
- Wifi
- SD card
- Camera connector
The details can be found at:
https://documentation.onioniot.com/omega4/getting-started/
Add the initial support for this board so that it can fully boot into
Linux with the root file system stored in the SPI NAND.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260313131058.708361-4-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Onion Omega4 board is a board based on the RV1103B SoC.
Document its compatible.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260313131058.708361-3-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the PMU GRF and IOC compatible strings for the RV1103B SoC.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260313131058.708361-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Smatch reports:
drivers/remoteproc/remoteproc_elf_loader.c:221
warn: always true condition '(val <= -1)'
The helper function rproc_u64_fit_in_size_t() compares the value
against (size_t)-1, which is equivalent to SIZE_MAX but can confuse
static analysis tools and lead to the above warning.
Replace (size_t)-1 with SIZE_MAX to make the intent explicit and
avoid the Smatch warning without changing the behavior.
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://lore.kernel.org/r/20260314110137.178981-1-mohd.abd.6602@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix the address translation emulation icode to set the Hardware
Access bit on the correct PTE instead of some other location.
-----BEGIN PGP SIGNATURE-----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=bU28
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.0, take #4
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix the address translation emulation icode to set the Hardware
Access bit on the correct PTE instead of some other location.
Add a description of struct reader to resolve a kernel-doc warning:
Warning: include/uapi/linux/trace_mmap.h:43 struct member 'reader' not described in 'trace_buffer_meta'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All are singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCacHhYgAKCRDdBJ7gKXxA
jqnKAPwLWHOazW6WB43goV605aA42anjBRm8kHg7E36X53OUJgD+L8KV2IXeDzGE
cFe9TxqtdhYg6/JRiwEE5eDYT/uWaAk=
=G0UF
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"6 hotfixes. 2 are cc:stable. All are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/stat: monitor all System RAM resources
mm/zswap: add missing kunmap_local()
mailmap: update email address for Muhammad Usama Anjum
zram: do not slot_free() written-back slots
mm/damon/core: avoid use of half-online-committed context
mm/rmap: clear vma->anon_vma on error
Arm China Linlon-D6 is register-compatible with the Mali-D71 display
pipeline for the purpose of basic modesetting.
On Linlon-D6, the PRODUCT_ID register is located at the same offset as on
Mali-D71 and reports 0x0060. The IP also exposes the same Komeda top-level
block layout expected by the existing d71_identify() probing flow, so we
can reuse the D71 function table to bring up the display engine.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Cunyuan Liu <cunyuan.liu@cixtech.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260313033119.33686-4-cunyuan.liu@cixtech.com
Add the Arm China Linlon D6 display controller compatible string.
Linlon D6 is register-compatible with Mali-D71, so describe it as a
vendor-specific compatible with a fallback to "arm,mali-d71".
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Cunyuan Liu <cunyuan.liu@cixtech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260313033119.33686-3-cunyuan.liu@cixtech.com
According to gpio-keys.yaml, linux,code is a required property.
Pass it to fix the following dt-schema warning:
lid-switch (gpio-keys): key-power: 'linux,code' is a required property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260323125721.692139-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Per discussion with Alexei, add Eduard and myself as maintainers under
BPF [GENERAL]. While at it, drop R entries for reviewers who have been
inactive.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260324152230.2916217-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refine the description to better highlight its features and use cases.
In addition, add instructions for building it as a module and clarify
the compression option.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Flags now control which data user space wants to query,
there is more information sources, and there's ability
to query duration of multiple timestamp reads.
New sources:
- CPU's monotonic,
- CPU's monotonic raw,
- GPU's cycle count
These changes should make the implementation of
VK_KHR_calibrated_timestamps more accurate and much simpler.
Signed-off-by: Marcin Slusarz <marcin.slusarz@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260324132557.1707286-1-marcin.slusarz@arm.com
Some English language corrections to firmware messages. No
functional changes.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260323081132.3217646-1-christianshewitt@gmail.com
o Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member.
o Fix finding default metric in 'perf stat'.
o Fix relative paths for including headers in 'perf kvm stat'.
o Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
--
2.53.0
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCacEV4gAKCRCyPKLppCJ+
J9bOAP9TD92nGe4Za4wBVTggTkRxqCuW7gIs3BKP+l9v80kyRwEA1NE3K2O/8MwB
7puBlYkK/VJ9Yrl0cU9eX3vOzCc7lAQ=
=BMqk
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member
- Fix finding default metric in 'perf stat'
- Fix relative paths for including headers in 'perf kvm stat'
- Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h
* tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Synchronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf kvm stat: Fix relative paths for including headers
perf parse-events: Fix big-endian 'overwrite' by writing correct union member
perf metricgroup: Fix metricgroup__has_metric_or_groups()
tools headers: Skip arm64 cputype.h check
Add a selftest to verify that the verifier correctly identifies refcounted
arguments in struct_ops programs, even when they are not the first
argument. This ensures that the restriction on tail calls for programs
with __ref arguments is properly enforced regardless of which argument
they appear in.
This test verifies the fix for check_struct_ops_btf_id() proposed by
Keisuke Nishimura [0], which corrected a bug where only the first
argument was checked for the refcounted flag.
The test includes:
- An update to bpf_testmod to add 'test_refcounted_multi', an operator with
three arguments where the third is tagged with "__ref".
- A BPF program 'test_refcounted_multi' that attempts a tail call.
- A test runner that asserts the verifier rejects the program with
"program with __ref argument cannot tail call".
[0]: https://lore.kernel.org/bpf/20260320130219.63711-1-keisuke.nishimura@inria.fr/
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Link: https://lore.kernel.org/r/20260321214038.80479-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current implementation only checks whether the first argument is
refcounted. Fix this by iterating over all arguments.
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Fixes: 38f1e66abd ("bpf: Do not allow tail call in strcut_ops program with __ref argument")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260320130219.63711-1-keisuke.nishimura@inria.fr
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to vif link management, postpone sta link destuction in
mt7996_mac_sta_remove() introducing mt7996_mac_sta_remove_link utility
routine and just disable sta link running mt7996_mac_sta_remove_links
routine.
This is a preliminary patch in order to support MLO link reconfiguration
in MT7996 driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-6-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7996_mcu_mld_reconf_stop_link and mt7996_mcu_mld_link_oper
utility routines in order to communicate to the mcu fw to disable/enable
a specific vif link. Please note these APIs are currently supported by
the MT7996 firmware only in AP mode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-5-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7996 hw requires to remove active links from the mcu BSSINFO table
destroying the interface. For this reason introduce mt7996_vif_link_destroy
routine and remove active (non-offchannel) vif links running
mt7996_remove_interface routine.
This is a preliminary patch in order to support MLO link reconfiguration
in MT7996 driver.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-4-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Destroy mt76_vif_link struct in mt7996_vif_link_remove routine and not
in mt76_unassign_vif_chanctx(). This is necessary since, in order to
properly support MLO link reconfiguration, we will destroy mt76_vif_link
struct during AP tear-down process and not running unassign_vif_chanctx
mac80211 callback.
This patch does not introduce any regression since
mt76_assign_vif_chanctx/mt76_unassign_vif_chanctx APIs are currently
used just by MT7996 driver.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-3-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Track active vif links in mt7996_vif_link_add and mt7996_vif_link_remove
routines.
This is a preliminary patch in order to remove AP MLD links from MCU
configuration during AP tear-down process and to support MLO link
reconfiguration in MT7996 driver.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-2-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rely on msta_link link_id value in mt7996_vif_link_remove routine
instead of using link_conf pointer. This assumption is correct since
msta_link link_id is set to link_conf link_id value in mt7996_vif_link_add
routine.
Moreover, fallback to default ieee80211_bss_conf struct if the link_conf
pointer in mt7996_vif_link_remove() is NULL.
MT7996 hw requires to remove AP MLD links from MCU configuration during
AP tear-down process (e.g. running mt7996_remove_interface()). Doing so,
we can't assume link_conf pointer is always non-NULL running
mt7996_vif_link_remove routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-1-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix frequency separation field for STR in MLD capabilities to get the
correct chip capability.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260316-mt7996-sta-str-v1-1-666814e6ab2d@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Release host link resources when mt7925_mac_sta_add_links() fails after
partial success.
msta->link[] and dev->mt76.wcid[] may already be published, so unwind
the host state to avoid leaving stale links behind.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-20-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the msta->link[link_id] publication until after
mt7925_mac_link_sta_add() succeeds.
msta->link[] is RCU-visible, so publishing it before setup completes can
expose a link whose add path later fails. Publish it only after success
to avoid partially initialized link state becoming visible.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-19-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Allocate mt792x_link_sta with kzalloc() and free it with kfree_rcu()
instead of devm-managed memory.
msta->link[] is published via RCU, so the link STA must remain valid
until readers have quiesced after teardown. Manage the object lifetime
with kfree_rcu() to match its RCU-visible publication.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-18-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move WCID teardown into mt7925_mac_link_sta_remove() to mirror the
dev->mt76.wcid[] publish done during link add.
This clears the published WCID before the rest of teardown, so WCID
lookups no longer expose a link that is being removed.
No functional change intended.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-17-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Remove the redundant mt76_wcid_init() call after publishing the WCID in
mt7925_mac_link_sta_add().
WCID is already initialized before publication, so reinitializing it
afterward is unnecessary and makes the setup ordering less clear.
No functional change intended.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-16-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Undo the published WCID state when mt7925_mac_link_sta_add() fails after
WCID setup.
The add path can fail after dev->mt76.wcid[] is published, so the error
path must clear the partial host-side WCID state to avoid leaving stale
entries behind.
No functional change intended.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260306232238.2039675-15-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>