Kuniyuki Iwashima says:
====================
ipv6: Fix two GC issues with permanent routes.
Patch 1 fixes the unbounded growth of tb6_gc_hlist due to
permanent routes whose exception routes have all expired.
Patch 2 fixes an issue where exception routes tied to
permanent routes are not properly aged.
Patch 3 is a selftest for the issue fixed by Patch 2.
====================
Link: https://patch.msgid.link/20260320072317.2561779-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the prior commit, IPv6 GC cannot track exceptions tied
to permanent routes if they were originally added as temporary
routes.
Let's add a test case for the issue.
1. Add temporary routes
2. Create exceptions for the temporary routes
3. Promote the routes to permanent routes
4. Check if GC can find and purge the exceptions
A few notes:
+ At step 4, unlike other test cases, we cannot wait for
$GC_WAIT_TIME. While the exceptions are always iterable via
netlink (since it traverses the entire fib tree instead of
tb6_gc_hlist), rt6_nh_dump_exceptions() skips expired entries.
If we waited for the expiration time, we would be unable to
distinguish whether the exceptions were truly purged by GC or
just hidden due to being expired.
+ For the same reason, at step 2, we use ICMPv6 redirect message
instead of Packet Too Big message. This is because MTU exceptions
always have RTF_EXPIRES, and rt6_age_examine_exception() does not
respect the period specified by net.ipv6.route.flush=1.
+ We add a neighbour entry for the redirect target with NTF_ROUTER.
Without this, the exceptions would be removed at step 3 when the
fib6_may_remove_gc_list() is called.
Without the fix, the exceptions remain even after GC is triggered
by sysctl -wq net.ipv6.route.flush=1.
FAIL: Expected 0 routes, got 5
TEST: ipv6 route garbage collection (promote to permanent routes) [FAIL]
With the fix, GC purges the exceptions properly.
TEST: ipv6 route garbage collection (promote to permanent routes) [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5eb902b8e7 ("net/ipv6: Remove expired routes with a
separated list of routes.") introduced a per-table GC list and
changed GC to iterate over that list instead of traversing
the entire route table.
However, it forgot to add permanent routes to tb6_gc_hlist
when exception routes are added.
Commit cfe82469a0 ("ipv6: add exception routes to GC list
in rt6_insert_exception") fixed that issue but introduced
another one.
Even after all exception routes expire, the permanent routes
remain in tb6_gc_hlist, potentially negating the performance
benefits intended by the initial change.
Let's count gc_args->more before and after rt6_age_exceptions()
and remove the permanent route when the delta is 0.
Note that the next patch will reuse fib6_age_exceptions().
Fixes: cfe82469a0 ("ipv6: add exception routes to GC list in rt6_insert_exception")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the AES-GCM library use the GHASH library instead of directly
calling gf128mul_lle(). This allows the architecture-optimized GHASH
implementations to be used, or the improved generic implementation if no
architecture-optimized implementation is usable.
Note: this means that <crypto/gcm.h> no longer needs to include
<crypto/gf128mul.h>. Remove that inclusion, and include
<crypto/gf128mul.h> explicitly from arch/x86/crypto/aesni-intel_glue.c
which previously was relying on the transitive inclusion.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-20-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that the structures in <crypto/ghash.h> are no longer used, remove
them. Since this leaves <crypto/ghash.h> as just containing constants,
include it from <crypto/gf128hash.h> to deduplicate these definitions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-19-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the 4k_lle multiplication functions and the associated
gf128mul_table_le data table. Their only user was the generic
implementation of GHASH, which has now been changed to use a different
implementation based on standard integer multiplication.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-18-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that there are no users of the "ghash" crypto_shash algorithm,
remove it. GHASH remains supported via the library API.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the "gcm" template access GHASH using the library API instead of
crypto_ahash. This is much simpler and more efficient, especially given
that all GHASH implementations are synchronous and CPU-based anyway.
Note that this allows "ghash" to be removed from the crypto_ahash (and
crypto_shash) API, which a later commit will do.
This mirrors the similar cleanup that was done with POLYVAL.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-pclmulqdqni" crypto_shash algorithm. Move the
corresponding assembly code into lib/crypto/, and wire it up to the
GHASH library.
This makes the GHASH library be optimized with x86's carryless
multiplication instructions. It also greatly reduces the amount of
x86-specific glue code that is needed, and it fixes the issue where this
GHASH optimization was disabled by default.
Rename and adjust the prototypes of the assembly functions to make them
fit better with the library. Remove the byte-swaps (pshufb
instructions) that are no longer necessary because the library keeps the
accumulator in POLYVAL format rather than GHASH format.
Rename clmul_ghash_mul() to polyval_mul_pclmul() to reflect that it
really does a POLYVAL style multiplication. Wire it up to both
ghash_mul_arch() and polyval_mul_arch().
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-15-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-s390" crypto_shash algorithm, and replace it with an
implementation of ghash_blocks_arch() for the GHASH library.
This makes the GHASH library be optimized with CPACF. It also greatly
reduces the amount of s390-specific glue code that is needed, and it
fixes the issue where this GHASH optimization was disabled by default.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-riscv64-zvkg" crypto_shash algorithm. Move the
corresponding assembly code into lib/crypto/, modify it to take the
length in blocks instead of bytes, and wire it up to the GHASH library.
This makes the GHASH library be optimized with the RISC-V Vector
Cryptography Extension. It also greatly reduces the amount of
riscv-specific glue code that is needed, and it fixes the issue where
this optimized GHASH code was disabled by default.
Note that this RISC-V code has multiple opportunities for improvement,
such as adding more parallelism, providing an optimized multiplication
function, and directly supporting POLYVAL. But for now, this commit
simply tweaks ghash_zvkg() slightly to make it compatible with the
library, then wires it up to ghash_blocks_arch().
ghash_preparekey_arch() is also implemented to store the copy of the raw
key needed by the vghsh.vv instruction.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "p8_ghash" crypto_shash algorithm. Move the corresponding
assembly code into lib/crypto/, and wire it up to the GHASH library.
This makes the GHASH library be optimized for POWER8. It also greatly
reduces the amount of powerpc-specific glue code that is needed, and it
fixes the issue where this optimized GHASH code was disabled by default.
Note that previously the C code defined the POWER8 GHASH key format as
"u128 htable[16]", despite the assembly code only using four entries.
Fix the C code to use the correct key format. To fulfill the library
API contract, also make the key preparation work in all contexts.
Note that the POWER8 assembly code takes the accumulator in GHASH
format, but it actually byte-reflects it to get it into POLYVAL format.
The library already works with POLYVAL natively. For now, just wire up
this existing code by converting it to/from GHASH format in C code.
This should be cleaned up to eliminate the unnecessary conversion later.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename the 'struct ghash_key' in arch/arm64/crypto/ghash-ce-glue.c to
prevent a naming conflict with the library 'struct ghash_key'. In
addition, declare the 'h' field with an explicit size, now that there's
no longer any reason for it to be a flexible array.
Update the comments in the assembly file to match the C code. Note that
some of these were out-of-date.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-neon" crypto_shash algorithm. Move the corresponding
assembly code into lib/crypto/, and wire it up to the GHASH library.
This makes the GHASH library be optimized on arm64 (though only with
NEON, not PMULL; for now the goal is just parity with crypto_shash). It
greatly reduces the amount of arm64-specific glue code that is needed,
and it fixes the issue where this optimization was disabled by default.
To integrate the assembly code correctly with the library, make the
following tweaks:
- Change the type of 'blocks' from int to size_t
- Change the types of 'dg' and 'h' to polyval_elem. Note that this
simply reflects the format that the code was already using.
- Remove the 'head' argument, which is no longer needed.
- Remove the CFI stubs, as indirect calls are no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Chen-Yu Tsai <wenst@chromium.org> says:
This series is part of a broader collection of regulator related
cleanups for MediaTek Chromebooks. This one covers the regulators
exposed by the ChromeOS Embedded Controller.
Patch 1 adds the names of the power supply inputs to the binding.
Patch 2 adds the supply names from the DT binding change in patch 1
to the regulator descriptions in the driver. This patch has a
checkpatch.pl warnings, but I wonder if it's because the context size
for checking complex macros is not large enough.
Device tree changes will be sent separately. The goal is to get the
regulator tree as complete as possible. This includes adding supply
names to other regulator DT bindings, and adding all the supply links
to the existing DTs.
Even a regulator remotely controlled by the EC will have a power supply
input.
Add the supply property name from the device tree binding to the
regulator description.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260320083135.2455444-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Even a regulator remotely controlled by the EC will have a power supply
input.
Add a property to describe the power supply input.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260320083135.2455444-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
arch/arm64/crypto/ghash-ce-core.S implements pmull_ghash_update_p8(),
which is used only by a crypto_shash implementation of GHASH. It also
implements other functions, including pmull_ghash_update_p64() and
others, which are used only by a crypto_aead implementation of AES-GCM.
While some code is shared between pmull_ghash_update_p8() and
pmull_ghash_update_p64(), it's not very much. Since
pmull_ghash_update_p8() will also need to be migrated into lib/crypto/
to achieve parity in the standalone GHASH support, let's move it into a
separate file ghash-neon-core.S.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-neon" crypto_shash algorithm. Move the corresponding
assembly code into lib/crypto/, and wire it up to the GHASH library.
This makes the GHASH library be optimized on arm (though only with NEON,
not PMULL; for now the goal is just parity with crypto_shash). It
greatly reduces the amount of arm-specific glue code that is needed, and
it fixes the issue where this optimization was disabled by default.
To integrate the assembly code correctly with the library, make the
following tweaks:
- Change the type of 'blocks' from int to size_t.
- Change the types of 'dg' and 'h' to polyval_elem. Note that this
simply reflects the format that the code was already using, at least
on little endian CPUs. For big endian CPUs, add byte-swaps.
- Remove the 'head' argument, which is no longer needed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Extend the qat_vfio_pci variant driver to support QAT 420xx (GEN 5)
Virtual Functions (VFs).
Add the relevant VF device ID to the probe table.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Link: https://lore.kernel.org/r/20260320213622.88549-2-giovanni.cabiddu@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
When flushing the FIFO, the driver waits for the busy flag to clear
with a timeout. Change the loop condition to use pre-decrement (--limit)
instead of post-decrement (limit--) so that warning message can show. Add a
ratelimited warning message to log SPI busy timeout events, aiding in
debugging.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/dad95ce42fb5677edfed32bc1f9b3e54df2cf8de.1773889292.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The hisi_spi_flush_fifo()'s inner while loop that lacks any timeout
mechanism. Maybe the hardware never becomes empty, the loop will spin
forever, causing the CPU to hang.
Fix this by adding a inner_limit based on loops_per_jiffy. The inner loop
now exits after approximately one jiffy if the FIFO remains non-empty, logs
a ratelimited warning, and breaks out of the outer loop. Additionally, add
a cpu_relax() inside the busy loop to improve power efficiency.
Fixes: c770d8631e ("spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCs")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/d834ce28172886bfaeb9c8ca00cfd9bf1c65d5a1.1773889292.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
arch/arm/crypto/ghash-ce-core.S implements pmull_ghash_update_p8(),
which is used only by a crypto_shash implementation of GHASH. It also
implements other functions, including pmull_ghash_update_p64() and
others, which are used only by a crypto_aead implementation of AES-GCM.
While some code is shared between pmull_ghash_update_p8() and
pmull_ghash_update_p64(), it's not very much. Since
pmull_ghash_update_p8() will also need to be migrated into lib/crypto/
to achieve parity in the standalone GHASH support, let's move it into a
separate file ghash-neon-core.S.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
arch/arm/crypto/ghash-ce-glue.c originally provided only a "ghash"
crypto_shash algorithm using PMULL if available, else NEON.
Significantly later, it was updated to also provide a full AES-GCM
implementation using PMULL.
This made the PMULL support in the "ghash" crypto_shash largely
obsolete. Indeed, the arm64 equivalent of this file unconditionally
uses only ASIMD in its "ghash" crypto_shash.
Given that inconsistency and the fact that the NEON-only code is more
easily separable into the GHASH library than the PMULL based code is,
let's align with arm64 and just support NEON-only for the pure GHASH.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that everything has been converted to the new dma::Coherent<T> API,
remove dma::CoherentAllocation<T>.
Suggested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/DH8O47F2GM1Z.3H3E13RSKIV22@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Remove all usages of dma::CoherentAllocation and use the new
dma::Coherent type instead.
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-9-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Convert libos (LibosMemoryRegionInitArgument) and rmargs
(GspArgumentsPadded) to use CoherentBox / Coherent::init() and simplify
the initialization. This also avoids separate initialization on the
stack.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Convert wpr_meta to use Coherent::init() and simplify the
initialization. It also avoids a separate initialization of
GspFwWprMeta on the stack.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Analogous to Coherent::zeroed() and Coherent::zeroed_with_attrs(), add
Coherent:init() and Coherent::init_with_attrs() which both take an impl
Init<T, E> argument initializing the DMA coherent memory.
Compared to CoherentInit, Coherent::init() is a one-shot constructor
that runs an Init closure and immediately exposes the DMA handle,
whereas CoherentInit is a multi-stage initializer that provides safe
&mut T access by withholding the DMA address until converted to
Coherent.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, dma::Coherent cannot safely provide (mutable) access to its
underlying memory because the memory might be concurrently accessed by a
DMA device. This makes it difficult to safely initialize the memory
before handing it over to the hardware.
Introduce dma::CoherentBox, a type that encapsulates a dma::Coherent
before its DMA address is exposed to the device. dma::CoherentBox can
guarantee exclusive access to the inner dma::Coherent and implement
Deref and DerefMut.
Once the memory is properly initialized, dma::CoherentBox can be
converted into a regular dma::Coherent.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-5-dakr@kernel.org
[ Remove unnecessary trait bounds. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
These constructors create a coherent container of a single object
instead of slice. They are named `zeroed` and `zeroed_with_attrs` to
emphasis that they are created initialized zeroed. It is intended that
there'll be new constructors that take `PinInit` instead of zeroing.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-4-dakr@kernel.org
[ Use kernel import style. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The Gameforce Ace's joystick axes were set incorrectly initially,
getting the X/Y and RX/RY axes backwards. Additionally, correct the
RY axis so that it is inverted.
All axes tested with evtest and outputting correct values.
Fixes: 4e946c447a ("arm64: dts: rockchip: Add GameForce Ace")
Reported-by: sydarn <sydarn@proton.me>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260310134919.550023-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Correct the regulator providing power to the PWM controlled fan.
Without this fix the fan only runs when the audio path is playing
audio (because the speaker amplifier and PWM fan share the same
regulator).
Fixes: 4e946c447a ("arm64: dts: rockchip: Add GameForce Ace")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260310134648.550006-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This reverts commit bdc4d388c6.
While Beelink A1 mostly follows the high-end RK3328 reference design,
it does not in fact have the S/PDIF connector, only HDMI and a 3.5mm
jack for the analog audio/TV codecs - the tiny form factor literally
doesn't have room to fit more!
Cc: Christian Hewitt <christianshewitt@gmail.com>
Cc: Alex Bee <knaerzche@gmail.com>
Fixes: bdc4d388c6 ("arm64: dts: rockchip: add SPDIF audio to Beelink A1")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://patch.msgid.link/0af77a02c2b0806d4ca72066392a5453fcc89a8f.1767111968.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The AP6212 WiFi/BT module on the LCKFB TaiShan Pi (RK3566) is prone to
communication timeouts and reset failures (error -110) when operating at
3 Mbps.
This patch stabilizes the Bluetooth interface by:
1. Updating the compatible string to 'brcm,bcm43430a1-bt' to better reflect
the actual chip revision used in the AP6212 module.
2. Lowering the maximum UART baud rate from 3,000,000 to 1,500,000 bps.
Tests show that 1.5 Mbps is the reliable upper limit for this board's
UART configuration, eliminating the initialization timeouts.
Fixes: 251e5ade9b ("arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566")
Signed-off-by: Ming Wang <wangming5719@gmail.com>
Link: https://patch.msgid.link/20260206090453.1041919-1-wming126@126.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to nxp,pca953x.yaml, the pattern for the led names should be:
"^led-[0-9a-z]+$".
Change it accordingly to fix the following dt-schema warning"
leddimmer@62 (nxp,pca9533): 'led1', 'led2', 'led3', 'led4' do not match any
of the regexes: '^led-[0-9a-z]+$', '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260311135604.21634-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to rockchip-dwmac.yaml, the mdio node should be 'mdio0' and
'wakeup-source' is not a valid property.
Change it accordingly.
This fixes the following dt-schema warning:
Unevaluated properties are not allowed ('mdio0', 'wakeup-source'\
were unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260303193855.828892-3-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Node names should be generic, so use 'rtc'.
Remove 'clock-frequency' as is not a valid property.
This fixes the following dt-schema warnings:
'hym8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260303193855.828892-2-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to hid-over-i2c.yaml, the correct name for the 3.3V supply
is 'vdd-supply'.
Fix it accordingly.
This fixes the following dt-schema warning:
'vcc-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://patch.msgid.link/20260304164448.1024410-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Node names should be generic, so use 'bluetooth' as the node name.
This fixes the following dt-schema warning:
'btmrvl@2' does not match '^bluetooth(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260226144842.2727107-2-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'regulator-suspend-mem-disabled' property is not documented nor used
anywhere.
Remove this invalid property.
This fixes the following dt-schema warning:
('regulator-suspend-mem-disabled' was unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260226144842.2727107-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'rotation-matrix' is not a valid property.
Use the documented 'mount-matrix' property instead.
This fixes the following dt-schema warning:
accelerometer@29 (st,lis3de): 'rotation-matrix' does not match any of the
regexes: '^pinctrl-[0-9]+$'
accelerometer@29 (st,lis3de): rotation-matrix:
b'1\x000\x000\x000\x00-1\x000\x000\x000\x001\x00' is not of type 'object',
'integer', 'array', 'boolean', 'null'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260226145916.2729492-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to st,m41t80.yaml, the correct compatible for the RV4162 RTC
is "microcrystal,rv4162".
Fix it accordingly.
This fixes the following dt-schema warning:
rtc@68: failed to match any schema with compatible: ['rv4162']
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260301124156.473862-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to rockchip,emac.yaml, 'phy-reset-duration' and 'phy-reset-gpios'
are not valid properties.
Use the valid 'reset-gpios' and 'reset-assert-us' properties under
the etherne-phy node.
This fixes the following dt-schema warning:
Unevaluated properties are not allowed ('phy-reset-duration',
'phy-reset-gpios' were unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260228013257.256973-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to rockchip-thermal.yaml, RK3288 does not require rockchip,grf,
so remove this invalid property.
This fixes the following dt-schema warning:
tsadc@ff280000 (rockchip,rk3288-tsadc): False schema does not allow [[53]]
The rockchip_thermal driver also confirms that grf is not needed as
the rk3288_tsadc_data contains:
.grf_required = false,
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260228013257.256973-2-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently, `CoherentAllocation` is concecptually a DMA coherent container
of a slice of `[T]` of runtime-checked length. Generalize it by creating
`dma::Coherent<T>` which can hold any value of `T`.
`Coherent::alloc_with_attrs` is implemented but not yet exposed, as I
believe we should not expose the way to obtain an uninitialized coherent
region.
`Coherent<[T]>` provides a `len` method instead of the previous `count()`
method to be consistent with methods on slices.
The existing type is re-defined as a type alias of `Coherent<[T]>` to ease
transition. Methods in use are not yet removed.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>