Commit graph

1,464,947 commits

Author SHA1 Message Date
Atharv Dubey
f48753aa3a media: cx25821-alsa: replace BUG_ON() with WARN_ON()
media: cx25821-alsa: replace BUG_ON() with WARN_ON()

Avoid crashing the kernel for a recoverable condition
by replacing BUG_ON() with WARN_ON().

Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Zhaoyang Yu
c03222d061 media: fimc: check return value of clk_enable in runtime_resume
In fimc_runtime_resume(), the return value of
clk_enable(fimc->clock[CLK_GATE]) was not checked. If enabling the clock
fails, subsequent register accesses (fimc_hw_reset() and capture/m2m
resume) may trigger a bus error or undefined behavior.

Fix this by checking the return value. If clk_enable() fails, return the
error immediately, preventing unsafe hardware access.

Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Felix Gu
f3e969a5b5 media: ti: vpe: Add missing v4l2_device_unregister in vip_remove()
The v4l2_device is registered during probe but was not being unregistered
during remove. Add the missing v4l2_device_unregister() call to properly
clean up resources.

Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Janne Grunau
7254b31a13 media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not
see a reason why vb2_dma_sg should behave differently. This avoids
hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in
drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of
tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.

gst-launch-1.0 v4l2src ! gtk4paintablesink

[   38.201528] ------------[ cut here ]------------
[   38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210
[   38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns
nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep
nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc
hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic
cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev
aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2
snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor
macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi
macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3
snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon
apple_sart apple_dockchannel macsmc apple_rtkit_helper
spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses
pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core
spi_apple
[   38.203300]  videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram
[   38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G        W           6.17.6+ #asahi-dev PREEMPT(full)
[   38.219040] Tainted: [W]=WARN
[   38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[   38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[   38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210
[   38.221643] lr : drm_gem_mmap_obj+0x78/0x210
[   38.222178] sp : ffffc0008dc678e0
[   38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480
[   38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968
[   38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0
[   38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968
[   38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8
[   38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff
[   38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8
[   38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000
[   38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038
[   38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb
[   38.231488] Call trace:
[   38.231806]  drm_gem_mmap_obj+0x1f8/0x210 (P)
[   38.232342]  drm_gem_mmap+0x140/0x260
[   38.232813]  __mmap_region+0x488/0x9a0
[   38.233277]  mmap_region+0xd0/0x148
[   38.233703]  do_mmap+0x350/0x5c0
[   38.234148]  vm_mmap_pgoff+0x14c/0x200
[   38.234612]  ksys_mmap_pgoff+0x150/0x208
[   38.235107]  __arm64_sys_mmap+0x34/0x50
[   38.235611]  invoke_syscall+0x50/0x120
[   38.236075]  el0_svc_common.constprop.0+0x48/0xf0
[   38.236680]  do_el0_svc+0x24/0x38
[   38.237113]  el0_svc+0x38/0x168
[   38.237507]  el0t_64_sync_handler+0xa0/0xe8
[   38.238034]  el0t_64_sync+0x198/0x1a0
[   38.238491] ---[ end trace 0000000000000000 ]---

There were discussions in [1] at the end of 2023 that mmap() on imported
dma-bufs should not be supported but as of v6.17 drm_gem_shmem_mmap() in
drm_gem_shmem_helper.c still supports it.
This might affect all gpu or accel drivers using drm_gem_shmem_mmap() or
the wrapper drm_gem_shmem_object_mmap().

[1] https://lore.kernel.org/dri-devel/bc7f7844-0aa3-4802-b203-69d58e8be2fa@linux.intel.com/

Cc: stable@vger.kernel.org
Fixes: 5ba3f757f0 ("[media] v4l: videobuf2: add DMA scatter/gather allocator")
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Hans Verkuil
dd3eff5db4 .mailmap: Add back old email alias
The old hans.verkuil@cisco.com email, long since dead, still pops up
once in a while when using get_maintainer.pl. Add it back to .mailmap
so it is mapped to a working email.

Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Andriy Utkin
b6f892ff82 MAINTAINERS: drop myself from solo6x10, tw5864
Years passed since I stopped being involved in development of these
drivers. Don't possess hardware samples, too.

Signed-off-by: Andriy Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Gaston Gonzalez
ca51131147 media: bcm2835-unicam: remove reference to dropped driver in Kconfig
The bcm2835-camera driver was dropped in commit <90204a38a7>.
Remove the paragraph in Kconfig making reference to it.

Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Gaston Gonzalez
b8db6cf0c2 media: bcm2835-unicam: remove obsolete comment
The bcm2835-camera driver was dropped in commit <90204a38a7>, but it
is still mentioned as a current driver in a comment section.

Remove the comment making reference to it.

Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Martin Tůma
6cc2b8d987 media:admin-guide:mgb4: Add zDML color mapping info
Document the zDML (Audi Digital Matrix Light) color mapping option for
the inputs and the new outputs color mapping property.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Martin Tůma
b4318729a0 media:pci:mgb4: Add zDML color mapping support
Add zDML (a special signal mapping as used in Audi Digital Matrix Lights)
color mapping support. In addition to extending the already existing color
mapping property of the inputs, the same property is added for the outputs
that must be configured in the same way as the inputs.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Martin Tůma
0924f7ed0c media:pci:mgb4: Fixed negative hwmon temperatures processing
The "magic" temperature formula must be computed using a signed integer for
negative temperatures to work properly.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Nauman Sabir
d894419261 media: docs: Fix typo 'hardwares' to 'hardware'
Fix incorrect plural form of the uncountable noun 'hardware' in the
legacy DVB audio documentation.

Signed-off-by: Nauman Sabir <officialnaumansabir@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Krzysztof Kozlowski
251475d98e media: samsung: exynos4-is: Simplify with scoped for each OF child loop
Use scoped for_each_compatible_node_scoped() loop when iterating over
device nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Andy Shevchenko
01537c973d media: vidtv: Rename PI definition to PI_SAMPLES
The definition of PI in the driver is not the actual value in radians,
but rather degrees. Since we are going to have a value in radians
defined in a global header, rename this definition to avoid potential
collisions. No functional changes.

Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Martin Hecht
ec6c3e3f0e media: i2c: alvium-csi2
Change from my company email address to gmail.com.

Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Martin Hecht
108bd79a12 dt-bindings: media: i2c: alliedvision,alvium-csi2
Change from my company email address to gmail.com.

Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:55 +01:00
Arnd Bergmann
ad4729225d media: mxl5005s: reduce stack usage in MXL5005_ControlInit
This function initializes two large structures with arrays. On at least
parisc, the specific code sequence here leads to a badly misoptimized
output from the compiler along with a warning about the resulting
excessive stack usage from many spilled variables:

drivers/media/tuners/mxl5005s.c: In function 'MXL5005_ControlInit.isra':
drivers/media/tuners/mxl5005s.c:1660:1: warning: the frame size of 1400 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Splitting this one function into two functions avoids this because there
are few temporaries that can be spilled to the stack in each of the smaller
structures, so this avoids the warning and also improves readability.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16 11:51:54 +01:00
Greg Kroah-Hartman
de6c925db9 Merge 7.0-rc4 into usb-next
We need the USB fixes in this branch as well to build on top of

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:50:48 +01:00
Johan Hovold
678f946b40 gpib: ni_usb: drop redundant device reference
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.

Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305102745.12032-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:48:54 +01:00
Johan Hovold
d35da40ec3 gpib: agilent_82357a: drop redundant device reference
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.

Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305102745.12032-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:48:54 +01:00
Jori Koolstra
0457681354 gpib: common: change gpib_class to a const struct
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change gpib_class to be a const struct class and drop the
class_create() call.

Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260303192124.3855792-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:48:51 +01:00
Ethan Nelson-Moore
42df3a519a gpib: remove unnecessary module_init/exit functions
Two GPIB drivers have unnecessary empty module_init and module_exit
functions. Remove them. Note that if a module_init function exists, a
module_exit function must also exist; otherwise, the module cannot be
unloaded.

Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131014152.35875-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:48:40 +01:00
Greg Kroah-Hartman
f3f5d52d6b Merge 7.0-rc4 into staging-next
We need the staging driver fixes in here to build on top of

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:47:14 +01:00
Johan Hovold
bf3e24a9bf gpib: lpvo_usb: rename driver symbol prefix
The LPVO driver apparently includes a more or less verbatim copy of the
USB skeleton driver.

Replace the "skel_" symbol prefix with "lpvo_" and rename the "usb_skel"
struct "lpvo" to avoid symbol name clashes and make this a bit more
palatable.

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305151729.10501-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:43:51 +01:00
Greg Kroah-Hartman
3812943e01 Linux 7.0-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmm3G/UeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZJUH/R0vQ3Vha48QDEic
 1NREwaHxAoTFi0i3y7OPPklqrP2V09D1qg4Q6fExYQVTQgV6F2DRjVbyPKrmr4ay
 BA6aHrUdnFngYHpDlI1b1r7rJiAIN4WFHl7StO70bS+EB+UPsP9cfP3CKXUfKfqT
 kyHXzUrd5QnjYmlb9rQw1E6rzsRamNtGUtZf7TwDidJYjtm3sPeDHUkjyRy4xkYd
 UouIu6W7UXoicl38bJAgaWBY5BiYtjN6ktnY4/gcqDeqYd7mTM3Eb1B+OSXgFfip
 F0OYfJhfWn+63WnPA+1I5jXWC1UrdVXTMK/NTYjhmGlfdmkLcWDlNGtu+qKZbpwj
 fmF3Kyo=
 =6nX1
 -----END PGP SIGNATURE-----

Merge 7.0-rc4 into char-misc-next

We need the char/misc/iio fixes in this branch as well to build on top
of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:41:58 +01:00
Shigeru Yoshida
6f770b73d0 dma: swiotlb: add KMSAN annotations to swiotlb_bounce()
When a device performs DMA to a bounce buffer, KMSAN is unaware of
the write and does not mark the data as initialized.  When
swiotlb_bounce() later copies the bounce buffer back to the original
buffer, memcpy propagates the uninitialized shadow to the original
buffer, causing false positive uninit-value reports.

Fix this by calling kmsan_unpoison_memory() on the bounce buffer
before copying it back in the DMA_FROM_DEVICE path, so that memcpy
naturally propagates initialized shadow to the destination.

Suggested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/CAG_fn=WUGta-paG1BgsGRoAR+fmuCgh3xo=R3XdzOt_-DqSdHw@mail.gmail.com/
Fixes: 7ade4f1077 ("dma: kmsan: unpoison DMA mappings")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260315082750.2375581-1-syoshida@redhat.com
2026-03-16 11:29:20 +01:00
Daniel Schaefer
4bc7bc4579 HID: intel-thc-hid: Set HID_PHYS with PCI BDF
Currently HID_PHYS is empty, which means userspace tools (e.g. fwupd)
that depend on it for distinguishing the devices, are unable to do so.
Other drivers like i2c-hid, usbhid, surface-hid, all populate it.

With this change it's set to, for example: HID_PHYS=0000:00:10.0

Each function has just a single HID device, as far as I can tell, so
there is no need to add a suffix.

Tested with fwupd 2.1.1, can avoid https://github.com/fwupd/fwupd/pull/9995

Cc: Even Xu <even.xu@intel.com>
Cc: Xinpeng Sun <xinpeng.sun@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-16 11:25:07 +01:00
Chen Ni
9ba4ef6847 pinctrl: realtek: Fix error check for devm_platform_ioremap_resource()
Replace NULL check with IS_ERR() for devm_platform_ioremap_resource()
return value. Use dev_err_probe() for error handling to maintain
consistency with the rest of the probe function.

Fixes: b7f698b22b ("pinctrl: realtek: Switch to use devm functions")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-03-16 11:13:51 +01:00
Lad Prabhakar
abf3502033 soc: renesas: r9a09g056-sys: Mark rzv2n_sys_init_data as __initconst
Annotate rzv2n_sys_init_data with __initconst as it is only used during
initialization.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260309165946.3003731-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-16 11:04:18 +01:00
Lad Prabhakar
71e94c7960 soc: renesas: r9a09g047-sys: Mark rzg3e_sys_init_data as __initconst
Annotate rzg3e_sys_init_data with __initconst as it is only used during
initialization.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260309165946.3003731-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-16 11:04:18 +01:00
Lad Prabhakar
a01c4cd7e2 soc: renesas: r9a09g057-sys: Mark rzv2h_sys_init_data as __initconst
Annotate rzv2h_sys_init_data with __initconst as it is only used during
initialization.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260309165946.3003731-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-16 11:04:18 +01:00
Geert Uytterhoeven
d784bbad7f ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
Use the existing of_phandle_args_equal() helper instead of open-coding
the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d8338ff1fd795912b466ccf55b49dcd6885b6925.1773241833.git.geert+renesas@glider.be
2026-03-16 10:59:59 +01:00
Eric Dumazet
eb2d16a7d5 af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]

Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.

Validate families early, do not wait set_ipsecrequest().

[1]

skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
 kernel BUG at net/core/skbuff.c:214 !
Call Trace:
 <TASK>
  skb_over_panic net/core/skbuff.c:219 [inline]
  skb_put+0x159/0x210 net/core/skbuff.c:2655
  skb_put_zero include/linux/skbuff.h:2788 [inline]
  set_ipsecrequest net/key/af_key.c:3532 [inline]
  pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
  km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
  xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
  xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150

Fixes: 08de61beab ("[PFKEYV2]: Extension for dynamic update of endpoint address(es)")
Reported-by: syzbot+b518dfc8e021988fbd55@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69b5933c.050a0220.248e02.00f2.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2026-03-16 10:58:21 +01:00
Minwoo Ra
29fe3a61bc xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.

The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.

xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.

Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net.

Fixes: 880a6fab8f ("xfrm: configure policy hash table thresholds by netlink")
Signed-off-by: Minwoo Ra <raminwo0202@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2026-03-16 10:58:21 +01:00
Tejun Heo
618a9db015 sched_ext: Use kobject_put() for kobject_init_and_add() failure in scx_alloc_and_add_sched()
kobject_init_and_add() failure requires kobject_put() for proper cleanup, but
the error paths were using kfree(sch) possibly leaking the kobject name. The
kset_create_and_add() failure was already using kobject_put() correctly.

Switch the kobject_init_and_add() error paths to use kobject_put(). As the
release path puts the cgroup ref, make scx_alloc_and_add_sched() always
consume @cgrp via a new err_put_cgrp label at the bottom of the error chain
and update scx_sub_enable_workfn() accordingly.

Fixes: 17108735b4 ("sched_ext: Use dynamic allocation for scx_sched")
Reported-by: David Carlier <devnexen@gmail.com>
Link: https://lore.kernel.org/r/20260314134457.46216-1-devnexen@gmail.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
2026-03-15 23:27:04 -10:00
Tejun Heo
0c66b0da00 sched_ext: Fix cgroup double-put on sub-sched abort path
The abort path in scx_sub_enable_workfn() fell through to out_put_cgrp,
double-putting the cgroup ref already owned by sch->cgrp. It also skipped
kthread_flush_work() needed to flush the disable path.

Relocate the abort block above err_unlock_and_disable so it falls through to
err_disable.

Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
2026-03-15 23:26:35 -10:00
Bartosz Golaszewski
09c8ef6236 Merge branch 'gpio/dev-init-rework' into gpio/for-current
Pull in the gpiochip_add_data_with_key() rework addressing resource
leaks in error path.
2026-03-16 10:23:47 +01:00
Srinivas Kandagatla
fc334ad4a1 dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: Add Glymur pinctrl
Document compatible for Qualcomm Glymur SoC LPASS TLMM pin controller,
fully compatible with previous SM8650 generation (same amount of pins
and functions).

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-03-16 10:11:09 +01:00
Rosen Penev
a6e53d05ab gpio: cs5535: use dynamically allocated priv struct
Static allocation is deprecated.

Remove the FIXME as gpiochip_add_data allows using gpiod_get_data.
No need for container_of.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260313001209.117823-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:11:02 +01:00
Tzung-Bi Shih
3518fd4c78 Revert "gpio: Access gpio_bus_type in gpiochip_setup_dev()"
This reverts commit cc11f4ef66.

Commit cc11f4ef66 ("gpio: Access `gpio_bus_type` in
gpiochip_setup_dev()") moved the bus type assignment from
gpiochip_add_data_with_key() to gpiochip_setup_dev().

This change introduced a bug where dev_printk() and friends might access
the bus name after gpiochip_add_data_with_key() but before
gpiochip_setup_dev() has run.  In this window, the bus type is not yet
initialized, leading to empty bus names in logs.

Move the bus type assignment back to gpiochip_add_data_with_key() to
ensure the bus name is available before any potential users like
dev_printk().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdU0Xb=Moca5LUex+VxyHQa2-uYJgYf4hzHiSEjDCQQT=Q@mail.gmail.com/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260313054112.1248074-1-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:10:02 +01:00
Linus Walleij
7673e4c7f7 Do not enable the v1 uAPI by default
It's been five years since we introduced the v2 uAPI and
the major consumer libgpiod is at v2.2.3.

Let's discourage the old ABI.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://patch.msgid.link/20260314-no-y-uapi1-default-v2-1-578f09c91b8f@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:08:09 +01:00
Alban Bedel
a25f48fd92 gpio: kempld: Implement the interrupt controller
Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.

The IRQ for the GPIO controller can be configured in the BIOS, along
with the IRQ for the I2C controller. These IRQ are returned by ACPI
but this information is only usable if both IRQ are configured. When
only one is configured, only one is returned making it impossible to
know which one it is.

Luckily the BIOS will set the configured IRQ in the PLD registers, so
it can be read from there instead, and that also work on platforms
without ACPI.

The vendor driver allowed to override the IRQ using a module
parameters, so there are boards in field which used this parameter
instead of properly configuring the BIOS. This implementation provides
this as well for compatibility.

Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-5-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:05:33 +01:00
Alban Bedel
2443c2e122 gpio: kempld: Add support for get/set multiple
As the bus accesses are quiet slow with this device, supporting the
get/set multiple API can help with performences. The implementation
tries to keep the number of bus access to a minimum by checking
the mask to only read or write the needed bytes.

Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-4-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:05:33 +01:00
Alban Bedel
84cb463d2f gpio: kempld: Add support for PLD version >= 2.8
Starting with version 2.8 there is a dedicated register to configure
the output level. Read the PLD version in the probe and select the
correct register to use for the set operations.

Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-3-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:05:32 +01:00
Alban Bedel
4071437cd2 gpio: kempld: Simplify the bit level register accesses
The hardware uses 8 bit registers but supports configurations with up
to 16 GPIO, so all GPIO registers come in pairs. Most accesses to
single bits is done using the kempld_gpio_bitop() and
kempld_gpio_get_bit() functions, which take a register index and bit
offset as parameter. These functions apply a modulo on the bit offset
but leave the register index as is, so callers have to use an
additional macro to fix the register index before the call.

Simplify things by also handling the register index offsetting in the
bitop functions.

Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-2-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-03-16 10:05:32 +01:00
Jani Nikula
9876394f64 drm/{i915,xe}: move framebuffer bo to parent interface
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.

Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/848d32a44bf844cba3d66e44ba9f20bea4a8352d.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2026-03-16 11:00:21 +02:00
Jani Nikula
a65c06a948 drm/i915/fb: make intel_fb_bo.c less dependent on display
intel_fb_bo.c is i915 core specific code, and should use struct
drm_i915_private instead of struct intel_display.

Switch one DISPLAY_VER() to GRAPHICS_VER(). The check is for < 4, where
they're effectively the same thing.

Reviewed-by: Suraj Kandpal@intel.com>
Link: https://patch.msgid.link/13087bd24bd5af5265ca6af67f086b93e26e311f.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2026-03-16 11:00:21 +02:00
Jani Nikula
37a6ed2c28 drm/{i915, xe}/bo: move display bo calls to parent interface
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].

Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.

Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2026-03-16 11:00:21 +02:00
Jani Nikula
49464bb697 drm/xe: rename intel_bo.c to xe_display_bo.c
Follow the xe_ prefixed file naming in xe. With xe_bo.[ch] already being
a thing in xe core, use xe_display_bo.c.

Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/2f73eda5117462407f12113ce096496282ee3fcc.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2026-03-16 11:00:21 +02:00
Jani Nikula
e3ef2c2117 drm/i915: move i915 specific bo implementation to i915
The bo interface implementation is different for both i915 and xe. Move
the i915 specific implementation from display to i915 core.

Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/e159166d623899996a51a577365ca7ab9b1a0974.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2026-03-16 11:00:21 +02:00