Commit graph

143,578 commits

Author SHA1 Message Date
Rafael J. Wysocki
bcaea4678f Merge branches 'acpi-pm' and 'pm-sleep'
* acpi-pm:
  platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
  ACPI / PM: Use Low Power S0 Idle on more systems
  ACPI / PM: Make it possible to ignore the system sleep blacklist

* pm-sleep:
  PM / hibernate: Drop unused parameter of enough_swap
  block, scsi: Fix race between SPI domain validation and system suspend
  PM / sleep: Make lock/unlock_system_sleep() available to kernel modules
  PM: hibernate: Do not subtract NR_FILE_MAPPED in minimum_image_size()
2018-01-18 02:55:28 +01:00
Rafael J. Wysocki
f31c376025 Merge branch 'pm-cpufreq'
* pm-cpufreq: (36 commits)
  cpufreq: scpi: remove arm_big_little dependency
  drivers: psci: remove cluster terminology and dependency on physical_package_id
  cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
  cpufreq: intel_pstate: Add Skylake servers support
  cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
  cpufreq: imx6q: add 696MHz operating point for i.mx6ul
  ARM: dts: imx6ul: add 696MHz operating point
  cpufreq: stats: Change return type of cpufreq_stats_update() as void
  powernv-cpufreq: Treat pstates as opaque 8-bit values
  powernv-cpufreq: Fix pstate_to_idx() to handle non-continguous pstates
  powernv-cpufreq: Add helper to extract pstate from PMSR
  cpu_cooling: Remove static-power related documentation
  cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations
  PM / OPP: Make local function ti_opp_supply_set_opp() static
  PM / OPP: Add ti-opp-supply driver
  dt-bindings: opp: Introduce ti-opp-supply bindings
  cpufreq: ti-cpufreq: Add support for multiple regulators
  cpufreq: ti-cpufreq: Convert to module_platform_driver
  cpufreq: Add DVFS support for Armada 37xx
  MAINTAINERS: add new entries for Armada 37xx cpufreq driver
  ...
2018-01-18 02:52:56 +01:00
Paul Mackerras
00608e1f00 KVM: PPC: Book3S HV: Allow HPT and radix on the same core for POWER9 v2.2
POWER9 chip versions starting with "Nimbus" v2.2 can support running
with some threads of a core in HPT mode and others in radix mode.
This means that we don't have to prohibit independent-threads mode
when running a HPT guest on a radix host, and we don't have to do any
of the synchronization between threads that was introduced in commit
c01015091a ("KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix
hosts", 2017-10-19).

Rather than using up another CPU feature bit, we just do an
explicit test on the PVR (processor version register) at module
startup time to determine whether we have to take steps to avoid
having some threads in HPT mode and some in radix mode (so-called
"mixed mode").  We test for "Nimbus" (indicated by 0 or 1 in the top
nibble of the lower 16 bits) v2.2 or later, or "Cumulus" (indicated by
2 or 3 in that nibble) v1.1 or later.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-18 12:05:19 +11:00
Rob Herring
59f47eff03 powerpc/pci: Use of_irq_parse_and_map_pci() helper
Instead of calling both of_irq_parse_pci() and irq_create_of_mapping(),
call of_irq_parse_and_map_pci(), which does the same thing. This will allow
making of_irq_parse_pci() a private, static function.

This changes the logic slightly in that the fallback path will also be
taken if irq_create_of_mapping() fails internally.

Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: fold in virq init from Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17 17:54:37 -06:00
Rob Herring
4670d610d5 PCI: Move OF-related PCI functions into PCI core
Following what has been done for other subsystems, move the remaining PCI
related code out of drivers/of/ and into drivers/pci/of.c

With this, we can kill a few kconfig symbols.

Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: minor whitespace, comment cleanups]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>
2018-01-17 17:36:39 -06:00
Dave Airlie
4a6cc7a44e Linux 4.15-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
 E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
 /bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
 g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
 IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
 I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
 =o5gx
 -----END PGP SIGNATURE-----

BackMerge tag 'v4.15-rc8' into drm-next

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.
2018-01-18 09:32:15 +10:00
Linus Torvalds
1d966eb4d6 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - A rather involved set of memory hardware encryption fixes to
     support the early loading of microcode files via the initrd. These
     are larger than what we normally take at such a late -rc stage, but
     there are two mitigating factors: 1) much of the changes are
     limited to the SME code itself 2) being able to early load
     microcode has increased importance in the post-Meltdown/Spectre
     era.

   - An IRQ vector allocator fix

   - An Intel RDT driver use-after-free fix

   - An APIC driver bug fix/revert to make certain older systems boot
     again

   - A pkeys ABI fix

   - TSC calibration fixes

   - A kdump fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/vector: Fix off by one in error path
  x86/intel_rdt/cqm: Prevent use after free
  x86/mm: Encrypt the initrd earlier for BSP microcode update
  x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryption
  x86/mm: Centralize PMD flags in sme_encrypt_kernel()
  x86/mm: Use a struct to reduce parameters for SME PGD mapping
  x86/mm: Clean up register saving in the __enc_copy() assembly code
  x86/idt: Mark IDT tables __initconst
  Revert "x86/apic: Remove init_bsp_APIC()"
  x86/mm/pkeys: Fix fill_sig_info_pkey
  x86/tsc: Print tsc_khz, when it differs from cpu_khz
  x86/tsc: Fix erroneous TSC rate on Skylake Xeon
  x86/tsc: Future-proof native_calibrate_tsc()
  kdump: Write the correct address of mem_section into vmcoreinfo
2018-01-17 12:30:06 -08:00
Linus Torvalds
7dfda84d16 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
 "An Intel RAPL events fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Fix Haswell and Broadwell server RAPL event
2018-01-17 12:26:37 -08:00
Linus Torvalds
88dc7fca18 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti bits and fixes from Thomas Gleixner:
 "This last update contains:

   - An objtool fix to prevent a segfault with the gold linker by
     changing the invocation order. That's not just for gold, it's a
     general robustness improvement.

   - An improved error message for objtool which spares tearing hairs.

   - Make KASAN fail loudly if there is not enough memory instead of
     oopsing at some random place later

   - RSB fill on context switch to prevent RSB underflow and speculation
     through other units.

   - Make the retpoline/RSB functionality work reliably for both Intel
     and AMD

   - Add retpoline to the module version magic so mismatch can be
     detected

   - A small (non-fix) update for cpufeatures which prevents cpu feature
     clashing for the upcoming extra mitigation bits to ease
     backporting"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  module: Add retpoline tag to VERMAGIC
  x86/cpufeature: Move processor tracing out of scattered features
  objtool: Improve error message for bad file argument
  objtool: Fix seg fault with gold linker
  x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros
  x86/retpoline: Fill RSB on context switch for affected CPUs
  x86/kasan: Panic if there is not enough memory to boot
2018-01-17 11:54:56 -08:00
Russell King
091f02483d ARM: net: bpf: clarify tail_call index
As per 90caccdd8c ("bpf: fix bpf_tail_call() x64 JIT"), the index used
for array lookup is defined to be 32-bit wide. Update a misleading
comment that suggests it is 64-bit wide.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:39:10 +00:00
Russell King
ec19e02b34 ARM: net: bpf: fix LDX instructions
When the source and destination register are identical, our JIT does not
generate correct code, which leads to kernel oopses.

Fix this by (a) generating more efficient code, and (b) making use of
the temporary earlier if we will overwrite the address register.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:38:21 +00:00
Russell King
02088d9b39 ARM: net: bpf: fix register saving
When an eBPF program tail-calls another eBPF program, it enters it after
the prologue to avoid having complex stack manipulations.  This can lead
to kernel oopses, and similar.

Resolve this by always using a fixed stack layout, a CPU register frame
pointer, and using this when reloading registers before returning.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:38:07 +00:00
Russell King
0005e55a79 ARM: net: bpf: correct stack layout documentation
The stack layout documentation incorrectly suggests that the BPF JIT
scratch space starts immediately below BPF_FP. This is not correct,
so let's fix the documentation to reflect reality.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:36:43 +00:00
Russell King
70ec3a6c2c ARM: net: bpf: move stack documentation
Move the stack documentation towards the top of the file, where it's
relevant for things like the register layout.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:36:43 +00:00
Russell King
d1220efd23 ARM: net: bpf: fix stack alignment
As per 2dede2d8e9 ("ARM EABI: stack pointer must be 64-bit aligned
after a CPU exception") the stack should be aligned to a 64-bit boundary
on EABI systems.  Ensure that the eBPF JIT appropraitely aligns the
stack.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:36:43 +00:00
Russell King
f4483f2cc1 ARM: net: bpf: fix tail call jumps
When a tail call fails, it is documented that the tail call should
continue execution at the following instruction.  An example tail call
sequence is:

  12: (85) call bpf_tail_call#12
  13: (b7) r0 = 0
  14: (95) exit

The ARM assembler for the tail call in this case ends up branching to
instruction 14 instead of instruction 13, resulting in the BPF filter
returning a non-zero value:

  178:	ldr	r8, [sp, #588]	; insn 12
  17c:	ldr	r6, [r8, r6]
  180:	ldr	r8, [sp, #580]
  184:	cmp	r8, r6
  188:	bcs	0x1e8
  18c:	ldr	r6, [sp, #524]
  190:	ldr	r7, [sp, #528]
  194:	cmp	r7, #0
  198:	cmpeq	r6, #32
  19c:	bhi	0x1e8
  1a0:	adds	r6, r6, #1
  1a4:	adc	r7, r7, #0
  1a8:	str	r6, [sp, #524]
  1ac:	str	r7, [sp, #528]
  1b0:	mov	r6, #104
  1b4:	ldr	r8, [sp, #588]
  1b8:	add	r6, r8, r6
  1bc:	ldr	r8, [sp, #580]
  1c0:	lsl	r7, r8, #2
  1c4:	ldr	r6, [r6, r7]
  1c8:	cmp	r6, #0
  1cc:	beq	0x1e8
  1d0:	mov	r8, #32
  1d4:	ldr	r6, [r6, r8]
  1d8:	add	r6, r6, #44
  1dc:	bx	r6
  1e0:	mov	r0, #0		; insn 13
  1e4:	mov	r1, #0
  1e8:	add	sp, sp, #596	; insn 14
  1ec:	pop	{r4, r5, r6, r7, r8, sl, pc}

For other sequences, the tail call could end up branching midway through
the following BPF instructions, or maybe off the end of the function,
leading to unknown behaviours.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:35:51 +00:00
Russell King
e906248182 ARM: net: bpf: avoid 'bx' instruction on non-Thumb capable CPUs
Avoid the 'bx' instruction on CPUs that have no support for Thumb and
thus do not implement this instruction by moving the generation of this
opcode to a separate function that selects between:

	bx	reg

and

	mov	pc, reg

according to the capabilities of the CPU.

Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-17 19:35:22 +00:00
Ingo Molnar
7a7368a5f2 Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-17 17:20:08 +01:00
Tianyu Lan
37b95951c5 KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
kvm_valid_sregs() should use X86_CR0_PG and X86_CR4_PAE to check bit
status rather than X86_CR0_PG_BIT and X86_CR4_PAE_BIT. This patch is
to fix it.

Fixes: f29810335965a(KVM/x86: Check input paging mode when cs.l is set)
Reported-by: Jeremi Piotrowski <jeremi.piotrowski@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-17 15:01:11 +01:00
Radim Krčmář
f44efa5aea KVM/ARM Fixes for v4.15, Round 3 (v2)
Three more fixes for v4.15 fixing incorrect huge page mappings on systems using
 the contigious hint for hugetlbfs; supporting an alternative GICv4 init
 sequence; and correctly implementing the ARM SMCC for HVC and SMC handling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJaXi9yAAoJEEtpOizt6ddymb4H/R6Q7uPSNY31d/wcMHg8qYS7
 foDW76r7mKliRVmCJoq9oqLqC7BLpQszfZ8dFjPSfdLA4xVMsuZ3GG3S7jlghiuN
 9+rZK+ZZX8g5uQNsqVITC3WrXmozBj+VEs/uH2Z1pu0g+siPTp7J2iv5+A5tvM3A
 NCySqgEjefQyy7Zs2r7TuvM+E3p9MY7jZih9E2o8mn2TQipVKrcnHRN3IjNNtI4u
 C17x70OQ1ZY7bwnmPnuPPqnX3H1fQ6+UgwtfDCu3KP7DAFVjqAz03X6wbf1nCLAB
 zzKok/SnIFWpr56JUSOzMpHWG8sOFscdVXxW97a2Ova0ur0rHW2iPiucTb8jOjQ=
 =gJL6
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-fixes-for-v4.15-3-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

KVM/ARM Fixes for v4.15, Round 3 (v2)

Three more fixes for v4.15 fixing incorrect huge page mappings on systems using
the contigious hint for hugetlbfs; supporting an alternative GICv4 init
sequence; and correctly implementing the ARM SMCC for HVC and SMC handling.
2018-01-17 14:59:27 +01:00
Nicholas Piggin
c610d65c0a powerpc/pseries: lift RTAS limit for hash
With the previous patch to switch to 64-bit mode after returning from
RTAS and before doing any memory accesses, the RMA limit need not be
clamped to 1GB to avoid RTAS bugs.

Keep the 1GB limit for older firmware (although this is more of a kernel
concern than RTAS), and remove it starting with POWER9.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:45:34 +11:00
Nicholas Piggin
5eae82cab5 powerpc/pseries: lift RTAS limit for radix
With the previous patch to switch to 64-bit mode after returning from
RTAS and before doing any memory accesses, the RMA limit need not be
clamped to 1GB to avoid RTAS bugs.

Keep the 1GB limit for older firmware (although this is more of a kernel
concern than RTAS), and remove it starting with POWER9.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:44:42 +11:00
Nicholas Piggin
47fee31dbd powerpc/64: rtas avoid accessing paca in 32-bit mode
Commit 177ba7c647 ("powerpc/mm/radix: Limit paca allocation in radix")
limited the paca allocation address to 1G on pSeries because RTAS return
accesses the paca in 32-bit mode:

    On return from RTAS we access the paca variables and we have 64 bit
    disabled. This requires us to limit paca in 32 bit range.

    Fix this by setting ppc64_rma_size to first_memblock_size/1G range.

Avoid this limit by switching to 64-bit mode before accessing any memory.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:42:58 +11:00
Nicholas Piggin
98ae0069cb powerpc/pseries: radix is not subject to RMA limit, remove it
The radix guest is not subject to the paravirtualized HPT VRMA limit,
so remove that from ppc64_rma_size calculation for that platform.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:42:14 +11:00
Nicholas Piggin
1513c33d71 powerpc/powernv: Remove real mode access limit for early allocations
This removes the RMA limit on powernv platform, which constrains
early allocations such as PACAs and stacks. There are still other
restrictions that must be followed, such as bolted SLB limits, but
real mode addressing has no constraints.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:41:44 +11:00
Nicholas Piggin
d4748276ae powerpc/64s: Improve local TLB flush for boot and MCE on POWER9
There are several cases outside the normal address space management
where a CPU's entire local TLB is to be flushed:

  1. Booting the kernel, in case something has left stale entries in
     the TLB (e.g., kexec).

  2. Machine check, to clean corrupted TLB entries.

One other place where the TLB is flushed, is waking from deep idle
states. The flush is a side-effect of calling ->cpu_restore with the
intention of re-setting various SPRs. The flush itself is unnecessary
because in the first case, the TLB should not acquire new corrupted
TLB entries as part of sleep/wake (though they may be lost).

This type of TLB flush is coded inflexibly, several times for each CPU
type, and they have a number of problems with ISA v3.0B:

- The current radix mode of the MMU is not taken into account, it is
  always done as a hash flushn For IS=2 (LPID-matching flush from host)
  and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if
  the R field does not match the current radix mode.

- ISA v3.0B hash must flush the partition and process table caches as
  well.

- ISA v3.0B radix must flush partition and process scoped translations,
  partition and process table caches, and also the page walk cache.

So consolidate the flushing code and implement it in C and inline asm
under the mm/ directory with the rest of the flush code. Add ISA v3.0B
cases for radix and hash, and use the radix flush in radix environment.

Provide a way for IS=2 (LPID flush) to specify the radix mode of the
partition. Have KVM pass in the radix mode of the guest.

Take out the flushes from early cputable/dt_cpu_ftrs detection hooks,
and move it later in the boot process after, the MMU registers are set
up and before relocation is first turned on.

The TLB flush is no longer called when restoring from deep idle states.
This was not be done as a separate step because booting secondaries
uses the same cpu_restore as idle restore, which needs the TLB flush.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:40:31 +11:00
Nicholas Piggin
4552d128c2 powerpc: System reset avoid interleaving oops using die synchronisation
The die() oops path contains a serializing lock to prevent oops
messages from being interleaved. In the case of a system reset
initiated oops (e.g., qemu nmi command), __die was being called
which lacks that synchronisation and oops reports could be
interleaved across CPUs.

A recent patch 4388c9b3a6 ("powerpc: Do not send system reset
request through the oops path") changed this to __die to avoid
the debugger() call, but there is no real harm to calling it twice
if the first time fell through. So go back to using die() here.
This was observed to fix the problem.

Fixes: 4388c9b3a6 ("powerpc: Do not send system reset request through the oops path")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:38:59 +11:00
Christoffer Dall
0482b50546 arm64: mm: Add additional parameter to uaccess_ttbr0_disable
Add an extra temporary register parameter to uaccess_ttbr0_disable which
is about to be required for arm64 PAN support.

This patch doesn't introduce any functional change but ensures that the
kernel compiles once the KVM/ARM tree is merged with the arm64 tree by
ensuring a trivially mergable conflict with commit
6b88a32c7a
("arm64: kpti: Fix the interaction between ASID switching and software PAN").

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-01-17 13:57:49 +01:00
Arnd Bergmann
2c957902b1 microblaze: fix iounmap prototype
The missing 'volatile' keyword on the iounmap argument leads to lots of
harmless warnings in an allmodconfig build:

sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-17 13:34:35 +01:00
Arnd Bergmann
71e7673dad microblaze: fix endian handling
Building an allmodconfig kernel fails horribly because of
endian mismatch. It turns out that the -mlittle-endian
switch was not honored at all as we were using the wrong
Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS.
Finally, the linker flags did not get set right.

This addresses all three of those issues, which now lets
me build both big-endian and little-endian kernels for
testing.

Fixes: 428dbf156c ("arch: change default endian for microblaze")
Fixes: 206d3642d8 ("arch/microblaze: add choice for endianness and update Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-17 13:34:28 +01:00
Michal Suchanek
1b689a95ce powerpc/pseries: include linux/types.h in asm/hvcall.h
Commit 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h

This breaks hvcall.h users that do not include the header themselves.

Fixes: 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17 23:30:46 +11:00
Michael Ellerman
236003e6b5 powerpc/64s: Allow control of RFI flush via debugfs
Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.

eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
    1
    $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
    $ cat /sys/kernel/debug/powerpc/rfi_flush
    0

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
2018-01-17 23:30:21 +11:00
Michael Ellerman
fd6e440f20 powerpc/64s: Wire up cpu_show_meltdown()
The recent commit 87590ce6e3 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:

  /sys/devices/system/cpu/vulnerabilities/meltdown

This commit wires up that file for 64-bit Book3S powerpc.

For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17 23:30:20 +11:00
Thomas Gleixner
45d55e7bac x86/apic/vector: Fix off by one in error path
Keith reported the following warning:

WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120
  x86_vector_free_irqs+0xa1/0x180
  x86_vector_alloc_irqs+0x1e4/0x3a0
  msi_domain_alloc+0x62/0x130

The reason for this is that if the vector allocation fails the error
handling code tries to free the failed vector as well, which causes the
above imbalance warning to trigger.

Adjust the error path to handle this correctly.

Fixes: b5dc8e6c21 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors")
Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos
2018-01-17 12:11:36 +01:00
Thomas Gleixner
d479244173 x86/intel_rdt/cqm: Prevent use after free
intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then
proceeds accessing it.

 BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80
 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195
 find_first_bit+0x1f/0x80
 has_busy_rmid+0x47/0x70
 intel_rdt_offline_cpu+0x4b4/0x510

 Freed by task 195:
 kfree+0x94/0x1a0
 intel_rdt_offline_cpu+0x17d/0x510

Do the teardown first and then free memory.

Fixes: 24247aeeab ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Peter Zilstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Roderick W. Smith" <rod.smith@canonical.com>
Cc: 1733662@bugs.launchpad.net
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161957510.2366@nanos
2018-01-17 11:56:47 +01:00
Paolo Bonzini
4fdec2034b x86/cpufeature: Move processor tracing out of scattered features
Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX),
so do not duplicate it in the scattered features word.

Besides being more tidy, this will be useful for KVM when it presents
processor tracing to the guests.  KVM selects host features that are
supported by both the host kernel (depending on command line options,
CPU errata, or whatever) and KVM.  Whenever a full feature word exists,
KVM's code is written in the expectation that the CPUID bit number
matches the X86_FEATURE_* bit number, but this is not the case for
X86_FEATURE_INTEL_PT.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luwei Kang <luwei.kang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-17 07:38:39 +01:00
David S. Miller
c02b3741eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Overlapping changes all over.

The mini-qdisc bits were a little bit tricky, however.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 00:10:42 -05:00
Michael Cree
0d83620fd1 alpha: extend memset16 to EV6 optimised routines
Commit 92ce4c3ea7, "alpha: add support for memset16", renamed
the function memsetw() to be memset16() but neglected to do this for
the EV6 optimised version, thus when building a kernel optimised
for EV6 (or later) link errors result.  This extends the memset16
support to EV6.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2018-01-16 19:34:46 -08:00
Paul Mackerras
6964e6a4e4 KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded
This moves the code that loads and unloads the guest SLB values so that
it is done while the guest LPCR value is loaded in the LPCR register.
The reason for doing this is that on POWER9, the behaviour of the
slbmte instruction depends on the LPCR[UPRT] bit.  If UPRT is 1, as
it is for a radix host (or guest), the SLB index is truncated to
2 bits.  This means that for a HPT guest on a radix host, the SLB
was not being loaded correctly, causing the guest to crash.

The SLB is now loaded much later in the guest entry path, after the
LPCR is loaded, which for a secondary thread is after it sees that
the primary thread has switched the MMU to the guest.  The loop that
waits for the primary thread has a branch out to the exit code that
is taken if it sees that other threads have commenced exiting the
guest.  Since we have now not loaded the SLB at this point, we make
this path branch to a new label 'guest_bypass' and we move the SLB
unload code to before this label.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-17 11:19:02 +11:00
Paul Mackerras
43ff3f6523 KVM: PPC: Book3S HV: Make sure we don't re-enter guest without XIVE loaded
This fixes a bug where it is possible to enter a guest on a POWER9
system without having the XIVE (interrupt controller) context loaded.
This can happen because we unload the XIVE context from the CPU
before doing the real-mode handling for machine checks.  After the
real-mode handler runs, it is possible that we re-enter the guest
via a fast path which does not load the XIVE context.

To fix this, we move the unloading of the XIVE context to come after
the real-mode machine check handler is called.

Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-17 11:18:48 +11:00
Linus Walleij
95220046a6 ARM: dts: Add ethernet to a bunch of platforms
These platforms have the PHY defined already so we just
need to add a single device node to each of them to activate
the ethernet device.

The PHY skew/delay settings for pin control is known from a
few vendor trees and old OpenWRT patch sets.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 00:26:50 +01:00
Linus Walleij
8f3093b348 ARM: dts: Add ethernet to the Gemini SoC
This adds the Gemini ethernet node to the Gemini SoC.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 00:24:11 +01:00
Daniel Borkmann
a2284d912b bpf, arm64: fix stack_depth tracking in combination with tail calls
Using dynamic stack_depth tracking in arm64 JIT is currently broken in
combination with tail calls. In prologue, we cache ctx->stack_size and
adjust SP reg for setting up function call stack, and tearing it down
again in epilogue. Problem is that when doing a tail call, the cached
ctx->stack_size might not be the same.

One way to fix the problem with minimal overhead is to re-adjust SP in
emit_bpf_tail_call() and properly adjust it to the current program's
ctx->stack_size. Tested on Cavium ThunderX ARMv8.

Fixes: f1c9eed7f4 ("bpf, arm64: take advantage of stack_depth tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-16 11:29:15 -08:00
=?UTF-8?q?Christian=20K=C3=B6nig?=
838cda3697 x86/PCI: Enable AMD 64-bit window on resume
Reenable the 64-bit window during resume.

Fixes: fa564ad963 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-16 11:45:50 -06:00
Catalin Marinas
6b88a32c7a arm64: kpti: Fix the interaction between ASID switching and software PAN
With ARM64_SW_TTBR0_PAN enabled, the exception entry code checks the
active ASID to decide whether user access was enabled (non-zero ASID)
when the exception was taken. On return from exception, if user access
was previously disabled, it re-instates TTBR0_EL1 from the per-thread
saved value (updated in switch_mm() or efi_set_pgd()).

Commit 7655abb953 ("arm64: mm: Move ASID from TTBR0 to TTBR1") makes a
TTBR0_EL1 + ASID switching non-atomic. Subsequently, commit 27a921e757
("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN") changes the
__uaccess_ttbr0_disable() function and asm macro to first write the
reserved TTBR0_EL1 followed by the ASID=0 update in TTBR1_EL1. If an
exception occurs between these two, the exception return code will
re-instate a valid TTBR0_EL1. Similar scenario can happen in
cpu_switch_mm() between setting the reserved TTBR0_EL1 and the ASID
update in cpu_do_switch_mm().

This patch reverts the entry.S check for ASID == 0 to TTBR0_EL1 and
disables the interrupts around the TTBR0_EL1 and ASID switching code in
__uaccess_ttbr0_disable(). It also ensures that, when returning from the
EFI runtime services, efi_set_pgd() doesn't leave a non-zero ASID in
TTBR1_EL1 by using uaccess_ttbr0_{enable,disable}.

The accesses to current_thread_info()->ttbr0 are updated to use
READ_ONCE/WRITE_ONCE.

As a safety measure, __uaccess_ttbr0_enable() always masks out any
existing non-zero ASID TTBR1_EL1 before writing in the new ASID.

Fixes: 27a921e757 ("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN")
Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-16 17:37:48 +00:00
Marc Zyngier
acfb3b883f arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.

Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.

Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-01-16 17:58:51 +01:00
Paolo Bonzini
d7231e75f7 KVM: VMX: introduce X2APIC_MSR macro
Remove duplicate expression in nested_vmx_prepare_msr_bitmap, and make
the register names clearer in hardware_setup.

Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Resolved rebase conflict after removing Intel PT. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-16 16:52:52 +01:00
Paolo Bonzini
c992384bde KVM: vmx: speed up MSR bitmap merge
The bulk of the MSR bitmap is either immutable, or can be copied from
the L1 bitmap.  By initializing it at VMXON time, and copying the mutable
parts one long at a time on vmentry (rather than one bit), about 4000
clock cycles (30%) can be saved on a nested VMLAUNCH/VMRESUME.

The resulting for loop only has four iterations, so it is cheap enough
to reinitialize the MSR write bitmaps on every iteration, and it makes
the code simpler.

Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-16 16:52:52 +01:00
Paolo Bonzini
1f6e5b2564 KVM: vmx: simplify MSR bitmap setup
The APICv-enabled MSR bitmap is a superset of the APICv-disabled bitmap.
Make that obvious in vmx_disable_intercept_msr_x2apic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Resolved rebase conflict after removing Intel PT. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-16 16:52:48 +01:00
Finn Thain
317b749e37 m68k/mac: Fix race conditions in OSS interrupt dispatch
The interrupt dispatch algorithm used in the OSS driver seems to be
subject to race conditions: an IRQ flag could be lost if asserted between
the MOV instructions from and to the interrupt flag register. But testing
shows that the write to the flag register has no effect, so rewrite the
algorithm without the theoretical race condition.

There is a second theoretical race condition here. When oss_irq() is
called with say, IPL == 2 it will invoke the SCSI interrupt handler.
The SCSI IRQ is then cleared by the mac_scsi driver. If SCSI and NuBus
IRQs are now asserted together, oss_irq() will be invoked with IPL == 3
and the mac_scsi interrupt handler can be re-entered. This re-entrance
issue is not limited to SCSI and could affect NuBus and ADB drivers too.
Fix it by splitting up oss_irq() into separate handlers for each IPL.

No-one seems to know how OSS irq flags can be cleared, if at all, so add
a comment to this effect (actually reinstate one I previously removed).
Testing showed that a slot IRQ with no handler can remain asserted (in
this case a Radius video card) without causing problems for other IRQs.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-01-16 16:52:17 +01:00