In lnet_ptl_match_delay() we check msg->msg_rx_delayed to see whether
the message has been added to the delay queue. But this check is done
after lnet_ptl_unlock() and lnet_res_unlock(), and the message can be
processed and freed before the check.
Replace the check with checking rc against LNET_MATCHMD_NONE, which
is how the callers of lnet_ptl_match_delay() know whether the message
was added to the delay queue. To make this work we reset rc in the
loop when there was no match and the message hasn't been delayed. In
addition reorganize the code and add comments to clarify the logic.
In lnet_ptl_match_md() a similar msg->msg_rx_delayed is replaced for
the same reason.
Signed-off-by: Olaf Weber <olaf@sgi.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7324
Reviewed-on: http://review.whamcloud.com/17840
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting TBF rules of jobid, parse_nidrange() prints warning
messages. However, this is unnecessary and annoying since paring
a TBF rule will always try to parse the jobid like a nid.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7647
Reviewed-on: http://review.whamcloud.com/17916
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is consider bad style in the linux kernel to
return -1 or a positive number for an error.
Instead return the appropriate error codes.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/17626
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the # of hops is not a mandatory parameter the LU-6060
patch will cause problems to already existing systems since it
changes the behavior by which a route is determined down.
To fix this case the # of hops now defaults to LNET_UNDEFINED_HOPS
if no hop count is specified.
LNET_UNDEFINED_HOPS is defined to ((__u32)-1). When it's printed as
%d, it displays as -1.
__u32 is used through out the call stack for hop count to explicitly
define the size of the hop count and to avoid any sizing issues when
passing data to and from the kernel.
To keep existing behavior both lnet_compare_routes() and LNetDist()
will treat undefined hop count as hop count 1.
When executing the logic in lnet_parse_rc_info() there is no
longer an assumption that the default hop count is 1. If
the hop count is 1 then it must've been explicitly set by
the user.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6851
Reviewed-on: http://review.whamcloud.com/15719
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When lnet_parse_put calls lnet_ptl_match_md, this function can attach
current message on the delayed list if there is no match. It means
this message can be taken over and freed by another thread who is
posting new MD, then it is not safe for caller of lnet_parse_put to
check this message again.
This patch fixes this issue by adding a local variable "ready_delay"
to store corresponding status of lnet_msg, so lnet doesn't need to
check the message again if lnet_ptl_match_md returned MATCH_NONE for
it.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7324
Reviewed-on: http://review.whamcloud.com/17065
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lnet_route_t::lr_downis is marked as zero even if there is no NI to
target network, this is wrong and breaks logic of ARF. This patch
fixes this problem.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6060
Reviewed-on: http://review.whamcloud.com/13417
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 020ecc6f32 ("staging: lustre: llite: Remove IS_ERR tests")
managed to break one of the converted checks by losing a dereference
causing the condition to be wrong and hence leading
to a crash later on in case of actual error.
IS_ERR_OR_NULL(*inode) got converted into !inode.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----------
- Add a new stm32f469 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bK+a
-----END PGP SIGNATURE-----
Merge tag 'stm32-soc-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/soc
Merge "STM32 SoC updates for v4.6 #2" from Maxime Coquelin:
Highlights:
-----------
- Add a new stm32f469 SoC
* tag 'stm32-soc-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: stm32: Identify a new SoC - STM32F469
- Enable runtime revision detection for dra7 to avoid multiple dts
files for various variants
- Add dma_slave_map for omap1/2/3 legacy mode booting
- Add RTC interconnect target data for ti81xx and am43x
- Add custom reset handler for PCIeSS
- Add eDMA interconnect target data for dra7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tJb7
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Merge "omap soc changes for v4.6 merge window" from Tony Lindgren:
SoC related changes for omaps for v4.6 merge window:
- Enable runtime revision detection for dra7 to avoid multiple dts
files for various variants
- Add dma_slave_map for omap1/2/3 legacy mode booting
- Add RTC interconnect target data for ti81xx and am43x
- Add custom reset handler for PCIeSS
- Add eDMA interconnect target data for dra7
* tag 'omap-for-v4.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls
ARM: AM43XX: hwmod: Add rtc hwmod
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
ARM: OMAP2+: hwmod data: Add SSI data for omap36xx
Pull i.MX clk updates from Shawn Guo:
The i.MX clock update for 4.6:
- Add the clock driver support for the latest i.MX6 family SoCs
addition - i.MX6QP.
- Clean up the whitespace in i.MX6UL clock driver and add the missing
KPP clock.
- Correct pwm7 clock name in i.MX6UL clock driver.
* tag 'imx-clk-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: add kpp clock for i.MX6UL
clk: imx: whitespace cleanup; no functional change
clk: imx: correct pwm7 clock name in driver for i.MX6UL
clk: imx: Add clock support for imx6qp
Pull Allwinner clk updates from Maxime Ripard:
Allwinner clocks additions for 4.6
A bunch of things, mostly:
- Finally switched everything over to OF_CLK_DECLARE, which should remove
orphans clocks entirely
- Reworked the clk-factors to be able to add new parameters
- Improved the error reporting
- A bunch of new clocks for new SoCs.
* tag 'sunxi-clocks-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits)
clk: sunxi: Add apb0 gates for H3
clk: sunxi: Improve divs_clk error handling and reporting
clk: sunxi: improve divider_clk error handling and reporting
clk: sunxi: improve mux_clk error handling and reporting
clk: sunxi: Fix sun8i-a23-apb0-clk divider flags
clk: sunxi: Remove clk_register_clkdev calls
clk: sunxi: Remove old probe and protection code
clk: sunxi: convert current clocks registration to CLK_OF_DECLARE
clk: sunxi: Make clocks setup functions take const pointer
clk: sunxi: Make clocks setup functions return their clock
clk: sunxi: improve error reporting for the mux clock
clk: sunxi: don't mark sun6i_ar100_data __initconst
clk: sunxi: add bus gates for A83T
clk: sunxi: Add apb0 gates for A83T
clk: sunxi: rewrite sun8i-a23-mbus-clk using the simpler composite clk
clk: sunxi: rewrite sun6i-ar100 using factors clk
clk: sunxi: rewrite sun6i-a31-ahb1-clk using factors clk with custom recalc
clk: sunxi: factors: Drop round_rate from clk ops
clk: sunxi: factors: Support custom formulas
clk: sunxi: factors: Consolidate get_factors parameters into a struct
...
The offset seems to have been copied from the sata clk. Fix it so
that enabling the crypto engine source clk works.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 5f775498bd ("clk: qcom: Fully support apq8064 global clock control")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1Z/XAAoJEFBXWFqHsHzOfUEH/1oiBDMBJEKH8/vmipV5cPmw
TAcK4W/1mS0SZo8xSYyi0iGcs5loA7fiypBZv6tKxI2IZS1w3sbJ0eHeeUUkURsG
okMpHCMeuEdjnWH/nTdABKGIlK1nAtwuDuD0BJqlk1VDLY/pIUY5kkoWsrXMlzwO
VkS2ic90HjsijmLH5y38kgo6RvkDDBxMzl8lzTxwfMNO8P5zCn9Wiqeerlbt/+Nw
+n8aDzow4XKuOaHaoh6/C9RSKkobCAs/RVwoYUhv4QCk1zC6rJ1Oq6yuYGJgiIOX
+gtdAIxTVv4RDJfEWEMT+N9SFM4qcFDAGtGPoXZyRKeedC5/xXuD2yNn2RUzShc=
=RoB/
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Merge "i.MX SoC update for 4.6" from Shawn Guo:
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
* tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
ARM: mx25: Add basic suspend/resume support
ARM: imx: Add msl code support for imx6qp
ARM: imx: enable big endian mode
ARM: imx: use endian-safe readl/readw/writel/writew
ARM: imx7d: correct chip version information
ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D
ARM: imx6: fix cleanup path in imx6q_suspend_init()
for the v4.5-rc cycle:
- Add back optimized cpuidle parameters for 34xx that were
incorrecly removed earlier with cpuidle cleanup
- Fix SSI for omap36xx to get modem working on N950/N9
- A series of omap hwmod fixes via Paul Walmsley <paul@pwsan.com>
to fix SSI for omap36xx for modem on N950/N9, fix for
OCP2SCP sysconfig idle mode, and reset data for PCIe on
dra7
- Fix out of range register access for omap3 control module
if syscon max_register is initialized like v4.6 will be
doing
- Fix l4_ls interconnect clocks for 81xx, it should always
be sysclk6_ck
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pwoK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Merge "omap non-urgent fixes for v4.6 merge window" from Tony Lindgren:
Fixes for omaps for v4.6 merge window that are not urgent
for the v4.5-rc cycle:
- Add back optimized cpuidle parameters for 34xx that were
incorrecly removed earlier with cpuidle cleanup
- Fix SSI for omap36xx to get modem working on N950/N9
- A series of omap hwmod fixes via Paul Walmsley <paul@pwsan.com>
to fix SSI for omap36xx for modem on N950/N9, fix for
OCP2SCP sysconfig idle mode, and reset data for PCIe on
dra7
- Fix out of range register access for omap3 control module
if syscon max_register is initialized like v4.6 will be
doing
- Fix l4_ls interconnect clocks for 81xx, it should always
be sysclk6_ck
* tag 'omap-for-v4.6/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix hwmod clock for l4_ls
ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
ARM: OMAP3: Add cpuidle parameters table for omap3430
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
ARM: OMAP2+: hwmod data: Add SSI data for omap36xx
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dBNt
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/defconfig
Merge "STM32 defconfig updates for v4.6 #1" from Maxime Coquelin:
Highlights:
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
* tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: config: Enable GPIO Led driver in stm32_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JVC1
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig changes for v4.6 merge window" from Tony Lindgren:
Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
* tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable AT24 eeprom
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
ARM: omap2plus_defconfig: Enable ISP support and dependencies
ARM: omap2plus_defconfig: Enable OMAP IOMMU support
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T9z9
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung MFD and related configs
arm64: defconfig: Enable exynos thermal config
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
VDD regulator input was specified for MSM8916. It turns our that this
regulator is used for the display panels used on MSM8916 platforms, but
not the DSI controller itself. Drop this regulator from the list.
Reported-by: Vinay Simha <vinaysimha@inforcecomputing.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
With the implementation of of_graph parsing, it isn't any longer
necessary for msm_host->device node to be same as dsi->dev.of_node. This
only holds true when the connected device is also a child of the dsi_host.
In the case of external bridge chips belonging to a different control
bus, these are guaranteed to be different.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We have a msm_fbev_free function to uninit fb_helper stuff, but we aren't
using it. Call it in msm_unload.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
attach_dev gets called in mdp4_kms_init, but there is no corresponding
detach_dev called in the error path or in the kms driver unload path.
Detach and destroy mmu in mdp4_destroy.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Assign drm_atomic_helper_crtc_set_property helper to MDP4 and MDP5
crtcs' set_property ops. This replaces the custom funcs that
returned an error even for standard crtc properties.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add HDMI PHY bindings. Update the example to use HDMI PHY.
Added a missing power-domains property in the HDMI core bindings. Also,
simplified HDMI TX's DT node name in the example.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
- addition of the NAND flash node
- addition of the dma properties for UART/USART nodes
- one update of the sama5d2 Xplained phy node
- addition of USB pinmux, button and leds
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJW1w1UAAoJEAf03oE53VmQmkAIALy7FfwfsXwV4EBMjrkyBbHF
6fODom/DihCOaATD1tOaKaW0imyNXRu6qsnV5PZNRU7SCbJffolcY852iAW8I6hL
qmdTumHGQszMJu95Nz+au04l9rqGvzeQ3v136YueMFtn6oQydF/6ttQzjjcCRKPy
0FRTk6IKroKZ2qRl4dbvnMF1QJW+3eSe5U3mULEkTdc2Fup60cfwP9Z8uzzYIYgf
CnMwyakQxqp/Y9tYTIMS/RKj+VuQxI0+nN6f8dWKsWbIKIEk6n8W+RtrKdYl1GZ2
VT0GsCJ/qw+EHqk3dD45tFFIvdiXIc9UElB4p+s7CLqX4GAShN1JNkidkBrTgKw=
=7QLe
-----END PGP SIGNATURE-----
Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt
Merge "at91: dt for 4.6 #2" from Nicolas Ferre:
Second 4.6 DT series, all patches for sama5d2 and its Xplained board:
- addition of the NAND flash node
- addition of the dma properties for UART/USART nodes
- one update of the sama5d2 Xplained phy node
- addition of USB pinmux, button and leds
* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d2 Xplained: add leds node
ARM: dts: at91: sama5d2 Xplained: add user push button
ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
ARM: dts: at91: sama5d2: add dma properties to UART nodes
ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
-----------
- Fix clock references in GPIO nodes
- Add early support to stm32f469 MCU
- Add USB HS support in host mdoe to stm32429-eval board
- Add Ethernet support to stm32429-eval board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SVE6
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/dt
Merge "STM32 DT updates for v4.6 #2" from Maxime Coquelin:
Highlights:
-----------
- Fix clock references in GPIO nodes
- Add early support to stm32f469 MCU
- Add USB HS support in host mdoe to stm32429-eval board
- Add Ethernet support to stm32429-eval board
* tag 'stm32-dt-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: dts: stm32f429: Enable Ethernet on Eval board
ARM: dts: stm32f429: Add Ethernet support
ARM: dts: stm32f429: Add system config bank node
ARM: dts: stm32429i-eval: Add USB HS host mode support
ARM: dts: stm32f429: Fix clocks referenced by GPIO banks
ARM: stm32: Supply a DTS file for the STM32F469 Discovery board
- A series of GPMC related interrupt changes from
Rogeq Quadros <rogerq@ti.com> to prepare adding interrupt
support to the NAND driver
- Add RTC support for ti81xx
- Correct LogicPD Torpedo mode description
- Add basic support for LG Optimus Black phone in several
patches by Paul Kocialkowski <contact@paulk.fr>
- Change address-cells for dra7 for LPAE
- Add TBCLK for PWMSS on dra7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JMzE
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Part 2 of device tree changes for omaps for v4.6 merge window" from Tony Lindgren:
- A series of GPMC related interrupt changes from
Rogeq Quadros <rogerq@ti.com> to prepare adding interrupt
support to the NAND driver
- Add RTC support for ti81xx
- Correct LogicPD Torpedo mode description
- Add basic support for LG Optimus Black phone in several
patches by Paul Kocialkowski <contact@paulk.fr>
- Change address-cells for dra7 for LPAE
- Add TBCLK for PWMSS on dra7
* tag 'omap-for-v4.6/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: omap3-sniper: TWL4030 keypad support
Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
ARM: dts: dm814x: dra62x: Fix NAND device nodes
ARM: dts: DRA7: Add dt nodes for PWMSS
ARM: dts: DRA7: Add TBCLK for PWMSS
ARM: dts: DRA7: change address-cells and size-cells
ARM: dts: omap3-sniper: USB OTG support
ARM: dts: LG Optimus Black codename sniper basic support
ARM: dts: dm3730-torpedo-devkit: Add "Wireless" to model
ARM: dts: Add RTC entry for dm816x
ARM: dts: Add RTC entry for dm814x and dra62x
ARM: dts: omap3: Fix NAND device nodes
ARM: dts: dm8168-evm: ARM: dts: Disable wait pin monitoring for NAND
ARM: dts: dm816x: Fix NAND device nodes
ARM: dts: am335x: Disable wait pin monitoring for NAND
ARM: dts: am335x: Fix NAND device nodes
ARM: dts: am437x: Disable wait pin monitoring for NAND
ARM: dts: am437x: Fix NAND device nodes
ARM: dts: dra7: Remove redundant nand property
...
- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
boards
- Relicense vf610 dts files under GPLv2/X11
- A patch series from Stefan updating Vybrid Colibri board support with
PMU, regulators and other devices enabled
- Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
- Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
- A series from Russell cleaning up hummingboard dts files
- A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
to use better audio codec frequency and display configurations
- Clean up whitespaces in i.MX6UL pinctrl header and add more devices
support for the SoC
- Other random dts updates to enable various devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1aZfAAoJEFBXWFqHsHzOWvwH/1ieekZ5VYnGyO4CT39DaNxU
LMkywkPtp8oUfdVHOfGEMj43knYHsaVFakGS2w8iMNzg+YonWXG/mkR3HUJmoS1L
HzFEnapLzACSSCbn8yZzWzzNvAlg2arqFErQUlhXe9/CNz64uZSigsO3Ib/JNOlX
GWDRa8szryEkEyk2cJo/wyWWSkLGGRai4uNBR6BmUq/MltVjVHOvTV5NeyKpinHZ
mQQFGEbvVk1hJ0sfceX/rmdxgvV0H3Axq8C0JyzbevUTcvS45A85tEXHkrHbYb/f
mJCNXxmmt+NrH8x79YxnuhKTRQ8lNn8fBu9wOtMaBJjRNB3ie3HBh2QabXBs/MA=
=FKmy
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt2
Merge "i.MX device tree updates for 4.6" from Shawn Guo:
- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
boards
- Relicense vf610 dts files under GPLv2/X11
- A patch series from Stefan updating Vybrid Colibri board support with
PMU, regulators and other devices enabled
- Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
- Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
- A series from Russell cleaning up hummingboard dts files
- A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
to use better audio codec frequency and display configurations
- Clean up whitespaces in i.MX6UL pinctrl header and add more devices
support for the SoC
- Other random dts updates to enable various devices
* tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (75 commits)
ARM: dts: imx53-qsb: Fix gpio button polarity
ARM: dts: vfxxx: Add DAC node for Vybrid SoC
ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
ARM: dts: imx: Add support for Advantech/GE B850v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE Bx50v3
ARM: dts: imx: Add Advantech BA-16 Qseven module
of: Add vendor prefix for General Electric Company
of: Add vendor prefix for Advantech Corporation
ARM: dts: imx35.dtsi: change the clock information for usb
ARM: dts: imx25.dtsi: change the clock information for usb
ARM: dts: imx6ul: add kpp support
ARM: dts: imx6ul: add gpmi support
ARM: dts: imx6ul: add lcdif support
ARM: dts: imx6ul: add sai support
ARM: dts: imx6ul: add flexcan support
ARM: dts: imx6ul: add sdma support
ARM: dts: imx6ul: add pwm[1-4] nodes
ARM: dts: imx6ul: disable PWMs by default
...
David Binderman pointed out that we were doing a full memset()
of the gdb register buffer and then doing a memcpy() to it that
was almost as big. This commit optimizes that by only doing a
memset() of the registers that are intended to be zero.
While making this change I noticed that we were not copying the
link register (LR, number 55) due to a fencepost error in commit
f419e6f63c ("arch: tile: kernel: kgdb.c: Use memcpy() instead of
pointer copy one by one"), and I've corrected that as well.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
1. Split common reboot/poweroff node to separate DTSI.
2. Don't overheat Odroid XU3 by cooling CPU with cpufreq.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=P/fL
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Merge "ARM: EXYNOS: dts for 4.6, 2nd pull" from Krzysztof Kozlowski:
Samsung DeviceTree updates and improvements for v4.6, second round:
1. Split common reboot/poweroff node to separate DTSI.
2. Don't overheat Odroid XU3 by cooling CPU with cpufreq.
* tag 'samsung-dt-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
ARM: dts: exynos: Add cooling levels for Exynos5420 CPUs
ARM: dts: exynos: Move syscon reboot/poweroff to common dtsi
Left over from c24588afc5
("atl1c: using fixed TXQ configuration for l2cb and l1c")
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8cc785f6f4 ("net: ipv4: make the ping
/proc code AF-independent") removed the code using it, but renamed this
variable instead of removing it.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3b766cd832 ("net/core: Add reading VF
statistics through the PF netdevice") added that variable but it's never
been used.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lars Persson says:
====================
dwc_eth_qos: stability fixes and support for CMA
This series has bug fixes for the dwc_eth_qos ethernet driver.
Mainly two stability fixes for problems found by Rabin Vincent:
- Successive starts and stops of the interface would trigger a DMA reset timeout.
- A race condition in the TX DMA handling could trigger a netdev watchdog
timeout.
The memory allocation was improved to support use of the CMA as DMA allocator
backend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts the changed init order from commit 3647bc35bd
("dwc_eth_qos: Reset hardware before PHY start") and makes another fix
for the race.
It turned out that the reset state machine of the dwceqos hardware
requires PHY clocks to be present in order to complete the reset
cycle.
To plug the race with the phy state machine we defer link speed
setting until the hardware init has finished.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since debug is hardcoded to 3, the defaults in the DWCEQOS_MSG_DEFAULT
macro are never used, which does not seem to be the intended behaviour
here. Set debug to -1 like other drivers so that DWCEQOS_MSG_DEFAULT is
actually used by default.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we are in non-atomic context here we can pass GFP_KERNEL to
dma_alloc_coherent(). This enables use of the CMA.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To prepare for using the CMA, we can not be in atomic context when
de-allocating DMA buffers.
The tx lock was needed only to protect the hw reset against the xmit
handler. Now we briefly grab the tx lock while stopping the queue to
make sure no thread is inside or will enter the xmit handler.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xmit handler and the tx_reclaim tasklet had a race on the tx_free
variable which could lead to a tx timeout if tx_free was updated after
the tx complete interrupt.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai says:
====================
cxgb4/cxgb4vf: Cleanup and minor fixes
This series sets FBMIN to 64 bytes for Chelsio's T6 series of adapters,
check to replenish fl is revised, some code cleanup in cxgb4vf sge
initialization code and removes dead code.
This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Function t4vf_wait_dev_ready() is already called in t4vf_prep_adapter(),
no need to call it again in adap_init0().
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a new function t4vf_fl_pkt_align() and use the same in SGE
initialization code to find out freelist packet alignment
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
