Commit graph

589,538 commits

Author SHA1 Message Date
Yunzhi Li
cebfdbf329 usb: dwc2: reset dwc2 core before dwc2_get_hwparams()
We initiate dwc2 usb controller in BIOS, dwc2_core_reset() should
be called before dwc2_get_hwparams() to reset core registers to
default value. Without this the FIFO setting might be incorrect
because calculating FIFO size need power-on value of
GRXFSIZ/GNPTXFSIZ/HPTXFSIZ registers.

This patch could avoid warnning massage like in rk3288 platform:
[    2.074764] dwc2 ff580000.usb: 256 invalid for
host_perio_tx_fifo_size. Check HW configuration.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 11:51:45 -06:00
Douglas Anderson
991824677f usb: dwc2: Restore GUSBCFG in dwc2_get_hwparams()
Previously dwc2_get_hwparams() was changing GUSBCFG and not putting it
back the way it was (specifically it set and cleared FORCEHOSTMODE).
Since we want to move dwc2_core_reset() _before_ dwc2_get_hwparams() we
should make sure dwc2_get_hwparams() isn't messing with things in a
permanent way.

Since we're now looking at GUSBCFG, it's obvious that we shouldn't need
all the extra delays if FORCEHOSTMODE was already set.  This will avoid
some delays for any ports that have forced host mode.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 11:51:30 -06:00
Gregory Herrero
3be99cd0e8 usb: dwc2: gadget: don't overwrite DCTL register on NAKEFF interrupts
When receiving GINTSTS_GINNAKEFF or GINTSTS_GOUTNAKEFF interrupt,
DCTL will be overwritten with DCTL_CGOUTNAK or DCTL_CGNPINNAK values.
Instead of overwriting it, write only needed bits.

It could cause an issue if GINTSTS_GINNAKEFF or GINTSTS_GOUTNAKEFF
interrupt is received after dwc2 disabled pullup by writing
DCTL_SFTDISCON bit.
Pullup will then be re-enabled whereas it should not.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 11:50:43 -06:00
Du, Changbin
0676c7e734 usb: dwc2: fix transfer stop programming for out endpoint
To stop an out endpoint, software should set sets the Global OUT NAK,
but not the Global Non-periodic IN NAK. This driver bug leads the out-ep
failed be in disabled state with below error.

dwc2_hsotg_ep_stop_xfr: timeout DOEPCTL.EPDisable

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 11:50:03 -06:00
Baolin Wang
a5beaaf394 usb: gadget: Add the console support for usb-to-serial port
It dose not work when we want to use the usb-to-serial port based
on one usb gadget as a console. Thus this patch adds the console
initialization to support this request.

To avoid the re-entrance when transferring data with usb endpoint,
it introduces a kthread to do the IO transmission.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 11:49:39 -06:00
Mike Krinkin
e827120146 null_blk: fix use-after-free error
blk_end_request_all may free request, so we need to save
request_queue pointer before blk_end_request_all call.

The problem was introduced in commit cf8ecc5a84
("null_blk: guarantee device restart in all irq modes")
and causes general protection fault with slab poisoning
enabled.

Fixes: cf8ecc5a84 ("null_blk: guarantee device
       restart in all irq modes")

Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:42:48 -07:00
Junichi Nomura
23688bf4f8 block: ensure to split after potentially bouncing a bio
blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.

Fixes: 54efd50bfd ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:26:53 -07:00
Shraddha Barke
8182503df1 block: sx8.c: Replace timeval with ktime_t
32-bit systems using 'struct timeval' will break in the year 2038,
in order to avoid that replace the code with more appropriate types.
This patch replaces timeval with 64 bit ktime_t which is y2038 safe.
Since st->timestamp is only interested in seconds, directly using
time64_t here. Function ktime_get_seconds is used since it uses
monotonic instead of real time and thus will not cause overflow.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:19:46 -07:00
Keith Busch
b5875222de NVMe: IO ending fixes on surprise removal
This patch fixes a lost request discovered during IO + hot removal.

The driver's pci removal deletes gendisks prior to shutting down the
controller to allow dirty data to sync. Dirty data can not be synced on
a surprise removal, though, and would potentially block indefinitely.

The driver previously had marked the queue as dying in this scenario
to prevent new requests from attempting, however it will still block
for requests that already entered the queue. This patch fixes this by
quiescing IO first, then aborting the requeued requests before deleting
disks.

Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:12:04 -07:00
Keith Busch
2b9b6e86bc NVMe: Export namespace attributes to sysfs
Exposes the NGUID, EUI-64, and NSID to sysfs entries under the disk's
kobject.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:10:45 -07:00
Keith Busch
a0a3408ee6 NVMe: Add pci error handlers
Requests enabling pcie aer support. Shuts down the controller on error
detected with io frozen state prior to requesting slot reset; resumes
controller after reset completes.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 10:09:06 -07:00
Andrew F. Davis
7d2c2acac5 iio: Make IIO value formating function globally available.
Make IIO value formating function globally available to allow IIO drivers
to output values as the core does.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 17:04:56 +00:00
Christoph Hellwig
bbc758ec04 block: remove REQ_NO_TIMEOUT flag
This was added for the 'magic' AEN requests in the NVMe driver that never
return.  We now handle them purely inside the driver and don't need this
core hack any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
f4800d6d15 nvme: merge iod and cmd_info
Merge the two per-request structures in the nvme driver into a single
one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
bf68405705 nvme: meta_sg doesn't have to be an array
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
eee417b069 nvme: properly free resources for cancelled command
We need to move freeing of resources to the ->complete handler to ensure
they are also freed when we cancel the command.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
aae239e191 nvme: simplify completion handling
Now that all commands are executed as block layer requests we can remove the
internal completion in the NVMe driver.  Note that we can simply call
blk_mq_complete_request to abort commands as the block layer will protect
against double copletions internally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
adf68f21c1 nvme: special case AEN requests
AEN requests are different from other requests in that they don't time out
or can easily be cancelled.  Because of that we should not use the blk-mq
infrastructure but just special case them in the completion path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
e7a2a87d59 nvme: switch abort to blk_execute_rq_nowait
And remove the now unused nvme_submit_cmd helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
d8f32166a9 nvme: switch delete SQ/CQ to blk_execute_rq_nowait
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
7688faa6dd nvme: factor out a few helpers from req_completion
We'll need them in other places later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Christoph Hellwig
4680072003 nvme: fix admin queue depth
The number in tag_set->queue depth includes the reserved tags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Keith Busch
4b9d5b1510 NVMe: Simplify metadata setup
We no longer require the two-pass setup for block integrity.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:34 -07:00
Keith Busch
53029b0441 NVMe: Remove device management handles on remove
We don't want to allow new references to open on a device that is
removed. This ties the lifetime of these handles to the physical device's
presence rather than to the open reference count.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Keith Busch
92f7a1624b NVMe: Use unbounded work queue for all work
Removes all usage of the global work queue so work can't be
scheduled on two different work queues, and removes nvme's work queue
singlethreadedness so controllers can be driven in parallel.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: keep the dead controller removal on the system workqueue to avoid
 deadlocks]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Keith Busch
540c801c65 NVMe: Implement namespace list scanning
The NVMe 1.1 specification provides an identify mode to return a
list of active namespaces. This is more efficient to discover which
namespace identifiers are active on a controller, providing potentially
significant improvement in scan time for controllers with sparesly
populated namespaces.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: add quirk for the broken Qemu Identify implementation.  To be relaxed
 later]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
6bf25d1641 nvme: switch abort_limit to an atomic_t
There is no lock to sychronize access to the abort_limit field of
struct nvme_ctrl, so switch it to an atomic_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
5c8809e650 nvme: remove dead controllers from a work item
Compared to the kthread this gives us multiple call prevention for free.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
fd634f4142 nvme: merge probe_work and reset_work
If we're using two work queues we're always going to run into races where
one item is tearing down what the other one is initializing.  So insted
merge the two work queues, and let the old probe_work also tear the
controller down first if it was alive.  Together with the better detection
of the probe path using a flag this gives us a properly serialized
reset/probe path that also doesn't accidentally trigger when two commands
time out and the second one tries to reset the controller while the first
reset is still in progress.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Keith Busch
e1569a1618 nvme: do not restart the request timeout if we're resetting the controller
Otherwise we're never going to complete a command when it is restarted just
after we completed all other outstanding commands in nvme_clear_queue.

The controller must be disabled prior to completing a presumed lost
command, do this by directly shutting down the controller before
queueing the reset work, and return EH_HANDLED from the timeout handler
after we shut the controller down.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: split and rebase]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
846cc05f95 nvme: simplify resets
Don't delete the controller from dev_list before queuing a reset, instead
just check for it being reset in the polling kthread.  This allows to remove
the dev_list_lock in various places, and in addition we can simply rely on
checking the queue_work return value to see if we could reset a controller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
297465c873 nvme: add NVME_SC_CANCELLED
To properly document how we are using a negative Linux error value to
communicate request cancellations inside the driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
31c7c7d2c9 nvme: merge nvme_abort_req and nvme_timeout
We want to be able to return bettern error values frmo nvme_timeout, which
is significantly easier if the two functions are merged.  Also clean up and
reduce the printk spew so that we only get one message per abort.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:33 -07:00
Christoph Hellwig
4c9f748f0e nvme: don't take the I/O queue q_lock in nvme_timeout
There is nothing it protects, but it makes lockdep unhappy in many different
ways.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:32 -07:00
Keith Busch
77bf25ea70 nvme: protect against simultaneous shutdown invocations
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:32 -07:00
Christoph Hellwig
7385014c07 nvme: only add a controller to dev_list after it's been fully initialized
Without this we can easily get bad derferences on nvmeq->d_db when the nvme
kthread tries to poll the CQs for controllers that are in half initialized
state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:23 -07:00
Christoph Hellwig
749941f236 nvme: only ignore hardware errors in nvme_create_io_queues
Half initialized queues due to kernel error returns or timeout are still a
good reason to give up on initializing a controller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:20 -07:00
Christoph Hellwig
287922eb0b block: defer timeouts to a workqueue
Timer context is not very useful for drivers to perform any meaningful abort
action from.  So instead of calling the driver from this useless context
defer it to a workqueue as soon as possible.

Note that while a delayed_work item would seem the right thing here I didn't
dare to use it due to the magic in blk_add_timer that pokes deep into timer
internals.  But maybe this encourages Tejun to add a sensible API for that to
the workqueue API and we'll all be fine in the end :)

Contains a major update from Keith Bush:

"This patch removes synchronizing the timeout work so that the timer can
 start a freeze on its own queue. The timer enters the queue, so timer
 context can only start a freeze, but not wait for frozen."

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22 09:38:16 -07:00
Daniel Kurtz
6c741c7409 pinctrl: mediatek: convert to arch_initcall
Move pinctrl initialization earlier in boot so that real devices can find
their pctldev without probe deferring.

Note: We don't change mt6397 probe order in this patch, since MT6397 is mfd
PMIC, which depends on pwrap on main AP to work. Since pmic-wrap itself
is module_platform_driver, we keep it as module_init.  A later patch
will convert both pmic-wrap, and all functions of the MT6397 mfd to
arch_initcall.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-22 16:21:00 +01:00
Will Deacon
5d7ee87708 arm64: perf: add support for Cortex-A72
Cortex-A72 has a PMUv3 implementation that is compatible with the PMU
implemented by Cortex-A57.

This patch hooks up the new compatible string so that the Cortex-A57
event mappings are used.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-22 14:45:35 +00:00
Will Deacon
57d7412395 arm64: perf: add format entry to describe event -> config mapping
It's all very well providing an events directory to userspace that
details our events in terms of "event=0xNN", but if we don't define how
to encode the "event" field in the perf attr.config, then it's a waste
of time.

This patch adds a single format entry to describe that the event field
occupies the bottom 10 bits of our config field on ARMv8 (PMUv3).

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-22 14:45:07 +00:00
Will Deacon
abff083ce2 ARM: perf: add format entry to describe event -> config mapping
It's all very well providing an events directory to userspace that
details our events in terms of "event=0xNN", but if we don't define how
to encode the "event" field in the perf attr.config, then it's a waste
of time.

This patch adds a single format entry to describe that the event field
occupies the bottom 8 bits of our config field on ARMv7.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-22 14:42:57 +00:00
Andrew Honig
0185604c2d KVM: x86: Reload pit counters for all channels when restoring state
Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash.  This will ensure
that 0 values are converted to 65536 as per the spec.

This is CVE-2015-7513.

Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22 15:36:26 +01:00
Paolo Bonzini
e24dea2afc KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
Virtual machines can be run with CPUID such that there are no MTRRs.
In that case, the firmware will never enable MTRRs and it is obviously
undesirable to run the guest entirely with UC memory.  Check out guest
CPUID, and use WB memory if MTRR do not exist.

Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22 15:29:00 +01:00
Paolo Bonzini
fa7c4ebd5a KVM: MTRR: observe maxphyaddr from guest CPUID, not host
Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU.
This is wrong, because var_mtrr_range's mask variable then is discontiguous
(like FF00FFFF000, where the first run of 0s corresponds to the bits
between host and guest maxphyaddr).  Instead always set up the masks
to be full 64-bit values---we know that the reserved bits at the top
are zero, and we can restore them when reading the MSR.  This way
var_mtrr_range gets a mask that just works.

Fixes: a13842dc66
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22 15:28:56 +01:00
Alexis Dambricourt
a7f2d78657 KVM: MTRR: fix fixed MTRR segment look up
This fixes the slow-down of VM running with pci-passthrough, since some MTRR
range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE.  Memory in the
0K-640K range was incorrectly treated as uncacheable.

Fixes: f7bfb57b3e
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com>
[Use correct BZ for "Fixes" annotation.  - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22 15:28:37 +01:00
Syam Sidhardhan
7ddb69222d Bluetooth: bfusb: Fix the return error code
-ENOMEM is the appropriate error code instead of -EIO.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-22 15:25:33 +01:00
Syam Sidhardhan
f71e823b87 Bluetooth: bfusb: Remove redundant error message
devm_kzalloc prints its own OOM message upon failure.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-22 15:25:33 +01:00
Syam Sidhardhan
17722e245b Bluetooth: bcm203x: Remove redundant error message
devm_kzalloc prints its own OOM message upon failure.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-22 15:25:33 +01:00
Ralf Baechle
ec7b97208a MIPS: Fix build error due to unused variables.
c861519fcf ("MIPS: Fix delay loops which may
be removed by GCC.") which made it upstream was an outdated version of the
patch and is lacking some the removal of two variables that became unused
thus resulting in further warnings and build breakage.  The commit
from ae878615d7cee5d7346946cf1ae1b60e427013c2 was correct however.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 15:21:18 +01:00