Since the hardware can apparently do both X and Y reflection, we
can advertize also 180 degree rotation as thats just X+Y reflection.
v2: Drop the BIT()
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-3-git-send-email-ville.syrjala@linux.intel.com
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Drop the BIT()
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-2-git-send-email-ville.syrjala@linux.intel.com
The min-freq-table is an array of values that match each CPU frequency to
an equivalent GPU frequency. Setting a single value of 0 on init is both
illegal (generates an error from the PCU) and nonsensical. Let's see if
we survive without that error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021205531.8651-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
We have reached the era where monitor bandwidths now exceed 31bits in
frequency calculations, though as we stored them in kHz units we are
safe from overflow in the modelines for some time.
[ 48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49
[ 48.726943] signed integer overflow:
[ 48.728503] 2240 * 1000000 cannot be represented in type 'int'
Reported-by: Martin Liška <marxin.liska@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk
On certain platforms not all planes support the same set of
rotations/reflections, so let's use the per-plane property
for this.
This is already a problem on SKL when we use the legay cursor plane
as it only supports 0|180 whereas the universal planes support
0|90|180|270, and it will be a problem on CHV soon.
v2: Use drm_plane_create_rotation_property() helper
v3: Drop the BIT(), use INTEL_GEN()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-12-git-send-email-ville.syrjala@linux.intel.com
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
Not sure I got the annoying crtc rotation_property handling right.
Might work, or migth not.
v2: Drop the BIT()
Don't create rotation property twice for each primary plane
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[danvet: Add comment per discussion between Tomi&Ville.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-8-git-send-email-ville.syrjala@linux.intel.com
0 isn't a valid rotation property value, so let's set the initial value
of the property to BIT(DRM_ROTATE_0) instead.
v2: Drop the BIT()
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-7-git-send-email-ville.syrjala@linux.intel.com
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Propagate error upwards (Boris)
v3: Drop the BIT()
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-6-git-send-email-ville.syrjala@linux.intel.com
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Drop the BIT()
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-5-git-send-email-ville.syrjala@linux.intel.com
Not all planes on the system may support the same rotations/reflections,
so make it possible to create a separate property for each plane.
This way userspace gets told exactly which rotations/reflections are
possible for each plane.
v2: Add drm_plane_create_rotation_property() helper
v3: Drop the BIT(), __builtin_ffs(x) - 1,
Moar WARNs for bad parameters
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com
The rotation property should only accept exactly one rotation angle
at once. Let's reject attempts to set none or multiple angles.
Testcase: igt/kms_rotation_crc/bad-rotation
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-3-git-send-email-ville.syrjala@linux.intel.com
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
Currently the driver crashes if smu7_enable_dpm_tasks() returns early,
which it does if DPM is already active. It seems to be better just to
continue anyway, at least I haven't noticed any ill effects. It's also
unclear at what state the hardware was left by the previous driver, so
IMO it's better to always fully initialize.
Way to reproduce:
with GPU passthrough.
forced power off the VM or forced reset the VM
without shutting down the Os.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to retain previous settings as this is the first time
we set pg_flags. Probably a copy/paste typo from the CZ code.
Avoids confusion.
No change in behavior as adev is kzallocated.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's technically an MC register so make sure we initialize it
in the MC module rather than the gfx module. Since other bits
in the same register are used to enable ATC CG features make
sure we apply the golden setting first.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need this for more than just DCE. Move it out of the DCE modules
and into the device code. This way we can be sure the scratch registers
are initialized properly before we run asic_init which happens before
DCE IPs are restored.
Fixes atombios hangs in asic_init.
Reviewed-by: JimQu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is already handled by the dce IP modules in their
suspend and resume code. No need to do it again.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Casting of voltage values to a larger size results in
overwriting adjacent memory in the structure.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently it's entirely possible to go through the link training step
without first determining the lane_count, which is silly since we end up
doing a bunch of aux transfers of size = 0, as highlighted by
WARN_ON(!msg->buffer != !msg->size), and can only ever result in a
'failed to update link training' message. This can be observed during
intel_dp_long_pulse where we can do the link training step, but before
we have had a chance to set the link params. To avoid this we add an
extra check for the lane_count in intel_dp_check_link_status, which
should prevent us from doing the link training step prematurely.
v2: add WARN_ON_ONCE and FIXME comment (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=97344
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476912593-10019-1-git-send-email-matthew.auld@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Dropping WA because it was for early steppings.
It is fixed in newer preproduction and all production revisions.
v2: add references, updated commit message
References: HSD#2126385, HSD#2131381, BSID#0764
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476977460-28088-1-git-send-email-arkadiusz.hiler@intel.com
2 more patches to stabilize the new MMUv2 support.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/lst/linux:
drm/etnaviv: block 64K of address space behind each cmdstream
drm/etnaviv: ensure write caches are flushed at end of user cmdstream
vmwgfx cleanups and fixes.
* 'drm-vmwgfx-fixes' of ssh://people.freedesktop.org/~syeh/repos_linux:
drm/vmwgfx: Adjust checks for null pointers in 13 functions
drm/vmwgfx: Use memdup_user() rather than duplicating its implementation
drm/vmwgfx: Use kmalloc_array() in vmw_surface_define_ioctl()
drm/vmwgfx: Avoid validating views on view destruction
drm/vmwgfx: Limit the user-space command buffer size
drm/vmwgfx: Remove a leftover debug printout
drm/vmwgfx: Allow resource relocations on byte boundaries
drm/vmwgfx: Enable SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command
drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait
drm/vmwgfx: Replace numeric parameter like 0444 with macro
One small fix for Armada, where the clock prepare/enable counts were
going awry.
* 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
drm/armada: fix clock counts
This are some fixes which I hoped to still get into v4.9. I used to
test them here since about 2 weeks and Meng came around to test it
on the second platform making use of this IP too, so they are well
tested now.
* 'fixes-for-v4.9-rc2' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: enable pixel clock when enabling CRTC
drm/fsl-dcu: do not transfer registers in mode_set_nofb
drm/fsl-dcu: do not transfer registers on plane init
drm/fsl-dcu: enable TCON bypass mode by default
According to spec: "KBL re-uses SKL values, except where
specific KBL values are listed."
And recently spec has changed adding different table for Display Port only.
But for all SKUs (H,S,U,Y) we have slightly different values.
v2: Fix wrong condition spotted by Jani.
v3: Fix 7th entry of KBL H and S table - by Manasi.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com
No functional change.
Only moving this fixup block out of ddi_translation definitions
so we can split skl and kbl cleanly.
v2: Remove useless comment. (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475258757-29540-1-git-send-email-rodrigo.vivi@intel.com
The A31's display pipeline has 2 frontends, 2 backends, and 2 TCONs. It
also has new display enhancement blocks, such as the DRC (Dynamic Range
Controller), the DEU (Display Enhancement Unit), and the CMU (Color
Management Unit). It supports HDMI, MIPI DSI, and 2 LCD/LVDS channels.
The A31s display pipeline is almost the same, just without MIPI DSI.
Only the TCON seems to be different, due to the missing mux for MIPI
DSI.
Add compatible strings for both of them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 TCON has mux controls for how TCON outputs are routed to the
HDMI and MIPI DSI blocks.
Since the A31s does not have MIPI DSI, it only has a mux for the HDMI
controller input.
This patch only adds support for the compatible strings. Actual support
for the mux controls should be added with HDMI and MIPI DSI support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We already have some differences between the 2 supported SoCs.
More will be added as we support other SoCs. To avoid bloating
the probe function with even more conditionals, move the quirks
to a separate data structure that's tied to the compatible string.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 and A31s also have the DRC as part of the display pipeline.
As we know virtually nothing about them, just add compatible strings
for both SoCs to the stub driver.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
gvt-next-fix-2016-10-20
This contains fix for first pull request.
- clean up header mess between i915 core and gvt
- new MAINTAINERS item
- new kernel-doc section
- fix compiling warnings
- gvt gem fix series from Chris
- fix for i915 intel_engine_cs change
- some sparse fixes from Changbin
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
If the kernel is old, more than a few releases old, chances are that the
user is using an old kernel for a good reason, despite there being GPU
hangs. After 180days since driver release stop suggesting that they
should send those reports upstream.
[Since Daniel acked this I expect he will pick up the dim patch to
automatically update the DRIVER_TIMESTAMP everytime we tag a new
release.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014134428.29582-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If we want to stop resetting the IPU in the future, masking all
interrupts before registering the irq handlers will not be enough to
avoid spurious interrupts. We also have to clear them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
Hook up support for DRM_FORMAT_YUV422, DRM_FORMAT_YVU422,
DRM_FORMAT_YUV444, DRM_FORMAT_YVU444, DRM_FORMAT_NV12,
and DRM_FORMAT_NV16.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
The IDMAC does support reading and writing DRM_FORMAT_YUV444 and
DRM_FORMAT_YVU444.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
ipu_cpmem_set_yuv_planar_full is only used directly, remove the wrapper.
Suggested-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
To support 4:2:2 or 4:4:4 chroma subsampling, divide the x/y offsets in
drm_plane_state_to_ubo/vbo only if necessary for the given pixel format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
ipu_plane_atomic_set_base is called from ipu_plane_atomic_update in two
different places, depending on whether drm_atomic_crtc_needs_modeset is
true. Also depending on the same condition, this function does two
different things.
This patch removes the indirection by merging the relevant parts into
ipu_plane_atomic_update, making the actual code flow more obvious as a
result. Also remove the duplicate planar format comment, which is
already found in ipu_plane_atomic_check.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
If the framebuffer pixel format is planar YUV and unchanged, but the U
or V plane offsets change, do not return an error, but request a modeset
instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
Without this patch, after enabling the overlay plane with an RGBA
framebuffer, switching to a framebuffer without alpha channel would
cause the plane to vanish, since the pixel local alpha is constant
zero in that case. Disable local alpha again when setting an opaque
framebuffer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>