Commit graph

38,387 commits

Author SHA1 Message Date
Maarten Lankhorst
3ba86073ed drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.
CI runs with DEBUG_WW_MUTEX_SLOWPATH, so -EDEADLK occurs a lot more.
Handle the case where drm_atomic_commit fails with -EDEADLK correctly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56D3FEF1.6070306@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-03-01 09:40:51 +01:00
Lucas Stach
411b0336cf drm/imx: only enable vblank IRQs when needed
The vblank IRQ is only needed to trigger page flip work, so we
might as well disable it when there is no work to do.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:41 +01:00
Lucas Stach
17a8d08df1 drm/imx: implement fence sync
If the FB is backed by a GEM object with an dma-buf attached
we need to wait for any pending fences to signal before executing
the page flip.

The implementation is straight forward by deferring the flip to
a workqueue in that case.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:40 +01:00
Lucas Stach
0a7ad343c8 drm/imx: keep GEM object referenced as long as scanout is active
The DRM core only references the currently queued/active framebuffer.
So there is a period of time where the flip is not completed, but
the GEM object backing the FB is already unreferenced and could be
destroyed if userspace closes its handle.

Make sure to keep a reference to the GEM object until the flip is
actually executed clean things up in a worker running behind the
flip execution.

Also move the page flip event into the context of this worker, so
it gets cleaned up automatically.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:40 +01:00
Lucas Stach
0bfc2b3d01 drm/imx: track flip state explicitly
Start tracking the flip state explicitly, as opposed to inferring
it from the presence if a new FB. This is a preparatory step to
introduce an new immediate state, where we can wait for a fence to
signal.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:40 +01:00
Lucas Stach
f5dca1608b drm/imx: don't touch primary fb on pageflip
The core already does the correct replacemet if the driver
page flip function returns without an error, so there is no
need to do it here.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:39 +01:00
Liu Ying
beec8ec0bd drm/imx: ipuv3 plane: Replace dev_info with dev_dbg if a plane's CRTC changes
This patch changes the dev_info() call to dev_dbg() in ipu_plane_update()
to print out the information that a plane's CRTC is changed, because this
kind of information is only useful for debugging.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:39 +01:00
Philipp Zabel
86bdb09f04 gpu: ipu-v3: ipu-dc: Simplify display controller microcode setup
This cleans up the display controller microcode setup in ipu_dc_init_sync
a little bit. The microcode template words for DI0 and DI1 are properly
separated to avoid a clash when DI1 is active in interlaced mode at the
same time as DI0 in non-interlaced mode.
A comment is added to explain the meaning of the sync counter.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:38 +01:00
Philipp Zabel
1645061679 drm/rockchip: remove rockchip_drm_encoder_get_mux_id
It is replaced by drm_of_encoder_active_endpoint_id.

Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Yakir Yang <ykk@rock-chips.com>
[for dw_hdmi-rockchip]
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:38 +01:00
Philipp Zabel
53141e42cf drm/imx: remove imx_drm_encoder_get_mux_id
It is replaced by drm_of_encoder_active_port_id.

Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:38 +01:00
Dave Airlie
efcebcf983 Merge tag 'drm-intel-next-2016-02-14' of git://anongit.freedesktop.org/drm-intel into drm-next
- lots and lots of fbc work from Paulo
- max pixel clock checks from Mika Kahola
- prep work for nv12 offset handling from Ville
- piles of small fixes and refactorings all around

* tag 'drm-intel-next-2016-02-14' of git://anongit.freedesktop.org/drm-intel: (113 commits)
  drm/i915: Update DRIVER_DATE to 20160214
  drm/i915: edp resume/On time optimization.
  agp/intel-gtt: Only register fake agp driver for gen1
  drm/i915: TV pixel clock check
  drm/i915: CRT pixel clock check
  drm/i915: SDVO pixel clock check
  drm/i915: DisplayPort-MST pixel clock check
  drm/i915: HDMI pixel clock check
  drm/i915: DisplayPort pixel clock check
  drm/i915: check that rpm ref is held when accessing ringbuf in stolen mem
  drm/i915: fix error path in intel_setup_gmbus()
  drm/i915: Stop depending upon CONFIG_AGP_INTEL
  agp/intel-gtt: Don't leak the scratch page
  drm/i915: Capture PCI revision and subsytem details in error state
  drm/i915: fix context/engine cleanup order
  drm/i915: Handle PipeC fused off on IVB/HSW/BDW
  drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
  drm/i915: Skip DDI PLL selection for DSI
  drm/i915/skl: Explicitly check for eDP in skl_ddi_pll_select()
  drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
  ...
2016-03-01 13:06:44 +10:00
Chris Wilson
ead8f34c70 drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
commit 0973128002
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 17 14:17:42 2016 +0200

    drm/i915: Add helper to get a display power ref if it was already enabled

left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as
intel_runtime_pm_get_if_in_use() would return true without incrementing
the local bookkeeping required for the assertions.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-03-01 12:36:47 +10:00
Eric Engestrom
d9f8e52b22 drm/i915: remove dead code
79e539453b ("DRM: i915: add mode setting
support") added those variables but never used them.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456763047-28828-2-git-send-email-eric.engestrom@imgtec.com
2016-02-29 17:58:09 +01:00
Eric Engestrom
c3454d575d drm/i915: remove left over dead code
ae80152dda ("drm/i915: Rewrite VLV/CHV
watermark code") removed everything that would have used those vars.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456763047-28828-1-git-send-email-eric.engestrom@imgtec.com
2016-02-29 17:55:28 +01:00
Liu Ying
327097930d drm/crtc: Use drm_mode_object_put() in __drm_framebuffer_unregister()
The function __drm_framebuffer_unregister() has boilerplate code to drop idr
reference.  Let's replace it with drm_mode_object_put() to simplify the code.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456716070-2602-1-git-send-email-gnuiyl@gmail.com
2016-02-29 17:51:09 +01:00
Christian König
22073fe764 drm/amdgpu: trace the pd_addr in vm_grab_id as well
Makes matching it to the flushes much easier.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-29 11:33:59 -05:00
Christian König
4ff37a83f1 drm/amdgpu: fix VM faults caused by vm_grab_id() v4
The owner must be per ring as long as we don't
support sharing VMIDs per process. Also move the
assigned VMID and page directory address into the
IB structure.

v3: assign the VMID to all IBs, not just the first one.
v4: use correct pointer for owner

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-29 11:33:46 -05:00
Matt Roper
ed4a6a7ca8 drm/i915: Add two-stage ILK-style watermark programming (v11)
In addition to calculating final watermarks, let's also pre-calculate a
set of intermediate watermark values at atomic check time.  These
intermediate watermarks are a combination of the watermarks for the old
state and the new state; they should satisfy the requirements of both
states which means they can be programmed immediately when we commit the
atomic state (without waiting for a vblank).  Once the vblank does
happen, we can then re-program watermarks to the more optimal final
value.

v2: Significant rebasing/rewriting.

v3:
 - Move 'need_postvbl_update' flag to CRTC state (Daniel)
 - Don't forget to check intermediate watermark values for validity
   (Maarten)
 - Don't due async watermark optimization; just do it at the end of the
   atomic transaction, after waiting for vblanks.  We do want it to be
   async eventually, but adding that now will cause more trouble for
   Maarten's in-progress work.  (Maarten)
 - Don't allocate space in crtc_state for intermediate watermarks on
   platforms that don't need it (gen9+).
 - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit
   now that ilk_update_wm is gone.

v4:
 - Add a wm_mutex to cover updates to intel_crtc->active and the
   need_postvbl_update flag.  Since we don't have async yet it isn't
   terribly important yet, but might as well add it now.
 - Change interface to program watermarks.  Platforms will now expose
   .initial_watermarks() and .optimize_watermarks() functions to do
   watermark programming.  These should lock wm_mutex, copy the
   appropriate state values into intel_crtc->active, and then call
   the internal program watermarks function.

v5:
 - Skip intermediate watermark calculation/check during initial hardware
   readout since we don't trust the existing HW values (and don't have
   valid values of our own yet).
 - Don't try to call .optimize_watermarks() on platforms that don't have
   atomic watermarks yet.  (Maarten)

v6:
 - Rebase

v7:
 - Further rebase

v8:
 - A few minor indentation and line length fixes

v9:
 - Yet another rebase since Maarten's patches reworked a bunch of the
   code (wm_pre, wm_post, etc.) that this was previously based on.

v10:
 - Move wm_mutex to dev_priv to protect against racing commits against
   disjoint CRTC sets. (Maarten)
 - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten)

v11:
 - Now that we've moved to atomic watermark updates, make sure we call
   the proper function to program watermarks in
   {ironlake,haswell}_crtc_enable(); the failure to do so on the
   previous patch iteration led to us not actually programming the
   watermarks before turning on the CRTC, which was the cause of the
   underruns that the CI system was seeing.
 - Fix inverted logic for determining when to optimize watermarks.  We
   were needlessly optimizing when the intermediate/optimal values were
   the same (harmless), but not actually optimizing when they differed
   (also harmless, but wasteful from a power/bandwidth perspective).

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-29 08:20:53 -08:00
Archit Taneja
e17afdceb4 drm/msm/hdmi: HDMI 8996 PHY/PLL support
Add support for the HDMI PHY/PLL found in MSM8996/APQ8096.

Unlike the previous PHYs supported in the driver, this doesn't need
the powerup/powerdown ops. The PLL prepare/unprepare clock ops
enable/disable the phy itself.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:32 -05:00
Archit Taneja
e9a2ce1349 drm/msm/hdmi: Update generated headers for HDMI 8996 PHY
Adds HDMI 8996 PHY offsets. The offsets are divided into 3 parts:
- Core HDMI PHY registers
- HDMI PLL registers (part of QSERDES block)
- HDMI TX lane registers (part of QSERDES block)

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:31 -05:00
Archit Taneja
568be320f7 drm/msm/hdmi: Update generated headers to split PHY/PLL offsets
- Create separate domains for 8960 PHY and PLL
- Create separate domains for 8x60 PHY

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:31 -05:00
Archit Taneja
ba3d7bf3a7 drm/msm/hdmi: Convert PHY files according to new design
Remove the old PHY ops managed by hdmi_platform_config and use them as ops
provided by the HDMI PHY driver.

Remove the old HDMI 8960 PLL code that used the top level HDMI TX mmio
base.

NOTE: With this commit, HDMI functionality will break until the HDMI
PHY/PLL register offsets in hdmi.xml.h aren't updated to be used as
separate domains.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:31 -05:00
Archit Taneja
e00012b256 drm/msm/hdmi: Make HDMI core get its PHY
Make HDMI core get its PHY by parsing the "phys" phandle. The core will use
this PHY reference to enable/disable PHY. The driver defers probe until PHY
isn't available.

The DT bindings used here is the same as the one used for PHYs using the
common PHY framework bindings.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:30 -05:00
Archit Taneja
ea184891b6 drm/msm/hdmi: Manage HDMI PLL through PHY driver
Add a helper to initialize PLL in the PHY driver. HDMI PLLs are going to
have their own mmio base different from that of PHY.

For the clock code in hdmi_phy_8960.c, some changes were needed for it to
work with the updated register offsets. Create a copy of the updated clock
code in hdmi_pll_8960.c, instead of rewriting it in hdmi_phy_8960.c
itself. This removes the need to place CONFIG_COMMON_CLOCK checks all
around, makes the code more legible, and also removes some old checkpatch
warnings with the original code.

The older hdmi pll clock ops in hdmi_phy_8960.c will be removed later. The
driver will use these until the HDMI PHY/PLL register offsets aren't
considered as separate domains (i.e. their offsets start from 0).

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:30 -05:00
Archit Taneja
15b4a45238 drm/msm/hdmi: Create a separate HDMI PHY driver
Create a PHY device that represents the TX PHY and PLL parts of the HDMI
block.

This makes management of PHY specific resources (regulators and clocks)
much easier, and makes the PHY and PLL usable independently. It also
simplifies the core HDMI driver, which currently assigns phy ops among
many other things.

The PHY driver implementation done here is very similar to the PHY driver
we already have for DSI.

Keep the old hdmi_phy_funcs ops for now. The driver will use these until
the HDMI PHY/PLL register offsets aren't considered as separate
domains (i.e. their offsets start from 0).

The driver doesn't use the common PHY framework for now. This is because
it's hard to map our ops with the ops provided by the framework. The
bindings used for this is the generic phy bindings. So, this can be
adapted to the PHY framework in the future, if possible.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:30 -05:00
Archit Taneja
c95ea16254 drm/msm/hdmi: Fix connector detect when there is no HPD gpio
Some platforms may not have a HPD gpio line to detect Hot Plug signal from
the connector. They need to rely only on reading REG_HDMI_HPD_INT_STATUS
for HPD.

Modify hdmi_connector_detect logic such that it checks for HPD only using
the status register if there is no HPD gpio.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:30 -05:00
Archit Taneja
dc50f782c9 drm/msm/hdmi: Clean up connector gpio usage
Make gpio allocation and usage iterative by parsing the gpios on a given
platform from a list. This gives us flexibility over what all gpios exist
for a platform, whether they are input or output, and what value they
should be set to.

In particular, this will make HDMI on 8x96 platforms easier to integrate
with the driver, as it doesn't have a HPD gpio input to them. Also, it
cleans things up a bit.

We still use the legacy gpio api here, as we might need to backport this
driver to downstream kernels.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:30 -05:00
Daniel Vetter
5790ff742b drm/i915: Update DRIVER_DATE to 20160229
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-29 09:59:07 +01:00
Oded Gabbay
efb1c6582e drm/amdgpu: Return -EPROBE_DEFER when amdkfd not loaded
amdgpu must load only after amdkfd's loading has been completed. If that
is not enforced, then amdgpu's call into amdkfd's functions will cause a
kernel BUG.

When amdgpu and amdkfd are built as kernel modules, that rule is enforced
by the kernel's modules loading mechanism. When amdgpu and amdkfd are
built inside the kernel image, that rule is enforced by ordering in the
drm Makefile (amdkfd before amdgpu).

Instead of using drm Makefile ordering, we can now use deferred loading
as amdkfd now returns -EPROBE_DEFER in kgd2kfd_init() when it is not yet
loaded.

This patch defers amdgpu loading by propagating -EPROBE_DEFER to the
kernel's drivers loading infrastructure. That will put amdgpu into the
pending drivers list (see description in dd.c). Once amdkfd is loaded,
a call to kgd2kfd_init() will return successfully and amdgpu will be able
to load.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-27 22:52:40 +02:00
Oded Gabbay
412c8f7de0 drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded
radeon must load only after amdkfd's loading has been completed. If that
is not enforced, then radeon's call into amdkfd's functions will cause a
kernel BUG.

When radeon and amdkfd are built as kernel modules, that rule is
enforced by the kernel's modules loading mechanism. When radeon and
amdkfd are built inside the kernel image, that rule is enforced by
ordering in the drm Makefile (amdkfd before radeon).

Instead of using drm Makefile ordering, we can now use deferred
loading as amdkfd now returns -EPROBE_DEFER in kgd2kfd_init() when it is
not yet loaded.

This patch defers radeon loading by propagating -EPROBE_DEFER to the
kernel's drivers loading infrastructure. That will put radeon into the
pending drivers list (see description in dd.c). Once amdkfd is loaded,
a call to kgd2kfd_init() will return successfully and radeon will be
able to load.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-27 22:52:40 +02:00
Oded Gabbay
c68f4528a2 drm/amdkfd: Track when module's init is complete
Current dependencies between amdkfd and radeon/amdgpu force the loading
of amdkfd _before_ radeon and/or amdgpu are loaded. When all these kernel
drivers are built as modules, this ordering is enforced by the kernel
built-in mechanism of loading dependent modules.

However, there is no such mechanism in case where all these drivers are
compiled inside the kernel image (not as modules). The current way to
enforce loading of amdkfd before radeon/amdgpu, is to put amdkfd before
radeon/amdgpu in the drm Makefile, but that method is way too fragile.

In addition, there is no kernel mechanism to check whether a kernel
driver that is built inside the kernel image, has already been loaded.

To solve this, this patch adds to kfd_module.c a new static variable,
amdkfd_init_completed, that is set to 1 only when amdkfd's
module initialization function has been completed (successfully).

kgd2kfd_init(), which is the initialization function of the
kgd-->kfd interface, and which is the first function in amdkfd called by
radeon/amdgpu, will return successfully only if amdkfd_init_completed is
equal 1.

If amdkfd_init_completed is not equal to 1, kgd2kfd_init() will
return -EPROBE_DEFER to signal radeon/amdgpu they need to defer
their loading until amdkfd is loaded.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-27 22:52:40 +02:00
Eric Anholt
6a60920986 drm/vc4: Initialize scaler DISPBKGND on modeset.
We weren't updating the interlaced bit, so we'd scan out incorrectly
if the firmware had brought up the TV encoder and we were switching to
HDMI.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 17:42:48 -08:00
Eric Anholt
a7c5047d1c drm/vc4: Fix setting of vertical timings in the CRTC.
It looks like when I went to add the interlaced bits, I just took the
existing PV_VERT* block and indented it, instead of copy and pasting
it first.  Without this, changing resolution never worked.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 17:42:47 -08:00
Eric Anholt
c31806fbdd drm/vc4: Fix the name of the VSYNCD_EVEN register.
It's used for delaying vsync in interlaced mode.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 15:51:29 -08:00
Eric Anholt
936f1a53f3 drm/vc4: Add another reg to HDMI debug dumping.
This is also involved in the HDMI setup sequence so it's nice to see
it.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 15:51:13 -08:00
Eric Anholt
851479ad59 drm/vc4: Bring HDMI up from power off if necessary.
If the firmware hadn't brought up HDMI for us, we need to do its
power-on reset sequence (reset HD and and clear its STANDBY bits,
reset HDMI, and leave the PHY disabled).

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 15:51:10 -08:00
Eric Anholt
48627eb8dc drm/vc4: Fix a framebuffer reference leak on async flip interrupt.
We'd need X to queue up an async pageflip while another is
outstanding, and then take a SIGIO.  I think X actually avoids sending
out the next pageflip while one's already queued, but I'm not sure.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-26 15:51:07 -08:00
Alex Deucher
ce22c4bfdf drm/amdgpu: update radeon acpi header
Add some new defs for ATPX.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26 14:17:04 -05:00
Alex Deucher
18aee16d7d drm/radeon: update radeon acpi header
Add some new defs for ATPX.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26 14:16:58 -05:00
Dan Carpenter
a65ecc4070 drm/amd: cleanup get_mfd_cell_dev()
It's simpler to just use snprintf() to print this to one buffer instead
of using strcpy() and strcat().  Also using snprintf() is slightly safer
than using sprintf().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26 12:43:47 -05:00
Chris Wilson
2743179d95 drm/i915: Execlists cannot pin a context without the object
Given that the intel_lr_context_pin cannot succeed without the object,
we cannot reach intel_lr_context_unpin() without first allocating that
object - so we can remove the redundant test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456485751-15213-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-02-26 13:16:36 +00:00
Chris Wilson
596c592319 drm/i915: Reduce the pointer dance of i915_is_ggtt()
The multiple levels of indirect do nothing but hinder the compiler and
the pointer chasing turns to be quite painful but painless to fix.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456484600-11477-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-02-26 13:15:39 +00:00
Chris Wilson
1c7f4bca5a drm/i915: Rename vma->*_list to *_link for consistency
Elsewhere we have adopted the convention of using '_link' to denote
elements in the list (and '_list' for the actual list_head itself), and
that the name should indicate which list the link belongs to (and
preferrably not just where the link is being stored).

s/vma_link/obj_link/ (we iterate over obj->vma_list)
s/mm_list/vm_link/ (we iterate over vm->[in]active_list)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-02-26 13:15:39 +00:00
Chris Wilson
135dc79efb drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
commit 0973128002
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 17 14:17:42 2016 +0200

    drm/i915: Add helper to get a display power ref if it was already enabled

left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as
intel_runtime_pm_get_if_in_use() would return true without incrementing
the local bookkeeping required for the assertions.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456434628-22574-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-02-26 15:11:40 +02:00
Michel Thierry
99cf8ea165 drm/i915/lrc: Only set RS ctx enable in ctx control reg if there is a RS
The driver should only set the "RS context enable" bit in the context
image if we plan to use the resource streamer.

Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456393738-35608-1-git-send-email-michel.thierry@intel.com
2016-02-26 11:30:28 +00:00
Michel Thierry
715629190e drm/i915/gen9: Set value of Indirect Context Offset based on gen version
The cache line offset for the Indirect CS context (0x21C8) varies from gen
to gen.

v2: Move it into a function (Arun), use MISSING_CASE (Chris)
v3: Rebased (catched by ci bat)

Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456223509-6454-1-git-send-email-michel.thierry@intel.com
2016-02-26 11:30:17 +00:00
Vincent Abriou
bf8f9e4a81 drm/sti: add debugfs fps_show/fps_get mechanism for planes
Display fps on demand for each used plane:
cat /sys/kernel/debug/dri/0/fps_get
Display fps in live in the console for each used plane:
echo 255 > /sys/kernel/debug/dri/0/fps_show

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26 10:06:23 +01:00
Vincent Abriou
b514bee765 drm/sti: add debugfs entries for TVOUT encoders
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26 10:06:23 +01:00
Vincent Abriou
a5f81078a5 drm/sti: add debugfs entries for MIXER crtc
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26 10:06:23 +01:00
Vincent Abriou
90dffef595 drm/sti: add debugfs entries for VID plane
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26 10:06:22 +01:00