Commit graph

369,531 commits

Author SHA1 Message Date
Linus Torvalds
ae71948f39 Just a single conversion to the new UUID API for this merge window.
-----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlm38CcLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYM6mRAAzqblh72N+v+1Nk+pWPabAdswG4+tWuujc8lklEbe
 RRekoUUOTi73EMS6BYjtrF38PlvV+mc+ClP9DN8/9tC8uvY+TBXhRF6XJmVEyeC9
 cdmpA/OhIFoURbZc8ausF/tFUPfRKZKStV6SLzwv4rbceMSiSnqcVt32ZPJ9ZczI
 yjl099pDbnjJvcx4birz6BeW6lKVB0bcMDp67zlfX+y21khqRR2AmYQSVt4WWWGS
 f9G5sKvMlmj8DM/SPtFLipPug+tKgZlv8WQ4vHPRTxc4ywlAY7FgrHM8WSxhjN5G
 tJEgtWyjTfb6HsKEOvyYqmqOL5EmyaXR8Qgf/e6p1KeeStoipyqSt5EQ0U1UAsgk
 naCWRCrKJGp/rObofFtCiT0uyylQME5jKtW7b9XQh92nnIIwvlbzylsTI6LRT6bf
 DH3xk1wu1JCETq9I6KnAizRMflzC0zPUqPMDKLH6IqMTlhmevqRLxAa33FUxZJTu
 E2n4yrZet2AqwVxU7GYpAphLCb6IAyREGZ88lYT+vRUsAH+SZkhdQmEoFNx1YdQ1
 16N5zdxfpn1S+f+UIqcWulLoSbKdiUdka1knXAWgi+3HExSzLEv5qOlShmU4DkwO
 wR9V6ccwLGeL3ILoBwy5ohmrhKWSxfUlRjisyH0jn2b9ZQ/UHcHXUyM3XImE309J
 qjw=
 =ERLM
 -----END PGP SIGNATURE-----

Merge tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid

Pull uuid updates from Christoph Hellwig:
 "Just a single conversion to the new UUID API for this merge window"

* tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid:
  efi: switch to use new generic UUID API
2017-09-12 13:27:21 -07:00
Cameron Gutman
122d6a3473 Input: xpad - validate USB endpoint type during probe
We should only see devices with interrupt endpoints. Ignore any other
endpoints that we find, so we don't send try to send them interrupt URBs
and trigger a WARN down in the USB stack.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org> # c01b5e7464 Input: xpad - don't depend on endpoint order
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-12 11:45:59 -07:00
Daniel Drake
79d2c8bede pinctrl/amd: save pin registers over suspend/resume
The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:

  i2c_hid i2c-ELAN1300:00: failed to reset device.

The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.

Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.

Based on code from pinctrl-intel.

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 15:58:45 +02:00
Linus Torvalds
260d16580d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
 "The second patch set for the 4.14 merge window:

   - Convert the dasd device driver to the blk-mq interface.

   - Provide three zcrypt interfaces for vfio_ap. These will be required
     for KVM guest access to the crypto cards attached via the AP bus.

   - A couple of memory management bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: blk-mq conversion
  s390/mm: use a single lock for the fields in mm_context_t
  s390/mm: fix race on mm->context.flush_mm
  s390/mm: fix local TLB flushing vs. detach of an mm address space
  s390/zcrypt: externalize AP queue interrupt control
  s390/zcrypt: externalize AP config info query
  s390/zcrypt: externalize test AP queue
  s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]
2017-09-12 06:01:59 -07:00
Gregory CLEMENT
a9a1a48336 pinctrl: armada-37xx: Fix gpio interrupt setup
Since commit dc749a09ea ("gpiolib: allow gpio irqchip to map irqs
dynamically"), the irqs for gpio are not statically allocated during in
gpiochip_irqchip_add.

This driver was based on this assumption for initializing the mask
associated to each interrupt this led to a NULL pointer crash in the
kernel:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
Mem abort info:
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000068
  CM = 0, WnR = 1
[0000000000000000] user address but active_mm is swapper
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-06657-g3b9f8ed25dbe #576
Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT)
task: ffff80001d908000 task.stack: ffff000008068000
PC is at armada_37xx_pinctrl_probe+0x5f8/0x670
LR is at armada_37xx_pinctrl_probe+0x5e8/0x670
pc : [<ffff000008e25cdc>] lr : [<ffff000008e25ccc>] pstate: 60000045
sp : ffff00000806bb80
x29: ffff00000806bb80 x28: 0000000000000024
x27: 000000000000000c x26: 0000000000000001
x25: ffff80001efee760 x24: 0000000000000000
x23: ffff80001db6f570 x22: ffff80001db6f438
x21: 0000000000000000 x20: ffff80001d9f4810
x19: ffff80001db6f418 x18: 0000000000000000
x17: 0000000000000001 x16: 0000000000000019
x15: ffffffffffffffff x14: 0140000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 0000000000000040
x9 : ffff000009923580 x8 : ffff80001d400248
x7 : ffff80001d400270 x6 : 0000000000000000
x5 : ffff80001d400248 x4 : ffff80001d400270
x3 : 0000000000000000 x2 : 0000000000000001
x1 : 0000000000000001 x0 : 0000000000000000
Process swapper/0 (pid: 1, stack limit = 0xffff000008068000)
Call trace:
Exception stack(0xffff00000806ba40 to 0xffff00000806bb80)
ba40: 0000000000000000 0000000000000001 0000000000000001 0000000000000000
ba60: ffff80001d400270 ffff80001d400248 0000000000000000 ffff80001d400270
ba80: ffff80001d400248 ffff000009923580 0000000000000040 0101010101010101
baa0: 0000000000000030 0000000000000000 0140000000000000 ffffffffffffffff
bac0: 0000000000000019 0000000000000001 0000000000000000 ffff80001db6f418
bae0: ffff80001d9f4810 0000000000000000 ffff80001db6f438 ffff80001db6f570
bb00: 0000000000000000 ffff80001efee760 0000000000000001 000000000000000c
bb20: 0000000000000024 ffff00000806bb80 ffff000008e25ccc ffff00000806bb80
bb40: ffff000008e25cdc 0000000060000045 ffff00000806bb60 ffff0000081189b8
bb60: ffffffffffffffff ffff00000811cf1c ffff00000806bb80 ffff000008e25cdc
[<ffff000008e25cdc>] armada_37xx_pinctrl_probe+0x5f8/0x670
[<ffff00000859d8c8>] platform_drv_probe+0x58/0xb8
[<ffff00000859bb44>] driver_probe_device+0x22c/0x2d8
[<ffff00000859bcac>] __driver_attach+0xbc/0xc0
[<ffff000008599c84>] bus_for_each_dev+0x4c/0x98
[<ffff00000859b440>] driver_attach+0x20/0x28
[<ffff00000859af90>] bus_add_driver+0x1b8/0x228
[<ffff00000859c648>] driver_register+0x60/0xf8
[<ffff00000859df64>] __platform_driver_probe+0x74/0x130
[<ffff000008e256dc>] armada_37xx_pinctrl_driver_init+0x20/0x28
[<ffff000008083980>] do_one_initcall+0x38/0x128
[<ffff000008e00cf4>] kernel_init_freeable+0x188/0x22c
[<ffff0000089b56e8>] kernel_init+0x10/0x100
[<ffff000008084bb0>] ret_from_fork+0x10/0x18
Code: f9403fa2 12001341 1100075a 9ac12041 (b9000001)
---[ end trace 8b0f4e05e1603208 ]---

This patch moves the initialization of the mask field in the irq_startup
function. However some callbacks such as irq_set_type and irq_set_wake
could be called before irq_startup. For those functions the mask is
computed at each call which is not a issue as these functions are not
located in a hot path but are used sporadically for configuration.

Fixes: dc749a09ea ("gpiolib: allow gpio irqchip to map irqs
dynamically")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:29:44 +02:00
Dan Carpenter
4ce504c4eb pinctrl: sprd: fix off by one bugs
info->groups[] has info->ngroups elements so these comparisons should be
>= instead of >.

Fixes: 41d32cfce1 ("pinctrl: sprd: Add Spreadtrum pin control driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:27:36 +02:00
Dan Carpenter
41470c379b pinctrl: sprd: check for allocation failure
devm_pinctrl_get() could fail with ERR_PTR(-ENOMEM) so I have added a
check for that.  I also reversed the other IS_ERR() test because it was
a little confusing to test one way and then the opposite a couple lines
later.

Fixes: 41d32cfce1 ("pinctrl: sprd: Add Spreadtrum pin control driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:26:40 +02:00
Geert Uytterhoeven
baec7e687a pinctrl: sprd: Restrict PINCTRL_SPRD to ARCH_SPRD or COMPILE_TEST
The Spreadtrum pinctrl drivers are only useful when building for a
Spreadtrum platform.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:21:12 +02:00
Randy Dunlap
aaab90bbca pinctrl: sprd: fix build errors and dependencies
Fix build errors when CONFIG_OF is not enabled.
Also, the pinctrl-sprd-sc9860 driver uses functions from the pinctrl-sprd
driver, so the former should depend on the latter driver.

../drivers/pinctrl/sprd/pinctrl-sprd.c: In function 'sprd_dt_node_to_map':
../drivers/pinctrl/sprd/pinctrl-sprd.c:290:2: error: implicit declaration of function 'pinconf_generic_parse_dt_config' [-Werror=implicit-function-declaration]
  ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
  ^
../drivers/pinctrl/sprd/pinctrl-sprd.c: At top level:
../drivers/pinctrl/sprd/pinctrl-sprd.c:844:44: error: array type has incomplete element type
 static const struct pinconf_generic_params sprd_dt_params[] = {
                                            ^
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Baolin Wang <baolin.wang@spreadtrum.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:18:41 +02:00
Colin Ian King
045b5792dc pinctrl: sprd: make three local functions static
The functions sprd_pmx_get_function_count, sprd_pmx_get_function_name
and sprd_pmx_get_function_groups are local to the source and do not
need to be in global scope, so make them static.

Cleans up sparse warnings:
"symbol 'sprd_pmx_get_function_count' was not declared. Should it be
static?"
"symbol 'sprd_pmx_get_function_name' was not declared. Should it be
static?"
"symbol 'sprd_pmx_get_function_groups' was not declared. Should it be
static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:18:31 +02:00
Masahiro Yamada
6d363bd178 pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h>
The #includes <linux/bug.h> is here to use BUILD_BUG_ON_ZERO().

Thanks to commit bc6245e5ef ("bug: split BUILD_BUG stuff out into
<linux/build_bug.h>"), it is now possible to reduce the number of
headers pulled in.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 11:18:17 +02:00
Linus Torvalds
c971aa3693 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:

 - fix resources release in error paths when registering thermal zone.
   (Christophe Jaillet)

 - introduce a new thermal driver for on-chip PVT (Process, Voltage and
   Temperature) monitoring unit implemented on UniPhier SoCs. This
   driver supports temperature monitoring and alert function. (Kunihiko
   Hayashi)

 - Add support for mt2712 chip in the mtk_thermal driver. (Louis Yu)

 - Add support for RK3328 SOC in rockchip_thermal driver. (Rocky Hao)

 - cleanup a couple of platform thermal drivers to constify
   thermal_zone_of_device_ops structures. (Julia Lawall)

 - a couple of fixes in int340x and intel_pch_thermal thermal driver.
   (Arvind Yadav, Sumeet Pawnikar, Brian Bian, Ed Swierk, Zhang Rui)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (27 commits)
  Thermal: int3406_thermal: fix thermal sysfs I/F
  thermal: mediatek: minor mtk_thermal.c cleanups
  thermal: mediatek: extend calibration data for mt2712 chip
  thermal: mediatek: add Mediatek thermal driver for mt2712
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: intel_pch_thermal: Fix enable check on Broadwell-DE
  thermal: rockchip: Support the RK3328 SOC in thermal driver
  dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible
  thermal: bcm2835: constify thermal_zone_of_device_ops structures
  thermal: exynos: constify thermal_zone_of_device_ops structures
  thermal: zx2967: constify thermal_zone_of_device_ops structures
  thermal: rcar_gen3_thermal: constify thermal_zone_of_device_ops structures
  thermal: qoriq: constify thermal_zone_of_device_ops structures
  thermal: hisilicon: constify thermal_zone_of_device_ops structures
  thermal: core: Fix resources release in error paths in thermal_zone_device_register()
  thermal: core: Use the new 'thermal_zone_destroy_device_groups()' helper function
  thermal: core: Add some new helper functions to free resources
  thermal: int3400_thermal: process "thermal table changed" event
  thermal: uniphier: add UniPhier thermal driver
  dt-bindings: thermal: add binding documentation for UniPhier thermal monitor
  ...
2017-09-11 22:26:20 -07:00
Kosuke Tatsukawa
c6644d07ef net: bonding: Fix transmit load balancing in balance-alb mode if specified by sysfs
Commit cbf5ecb305 ("net: bonding: Fix transmit load balancing in
balance-alb mode") tried to fix transmit dynamic load balancing in
balance-alb mode, which wasn't working after commit 8b426dc54c
("bonding: remove hardcoded value").

It turned out that my previous patch only fixed the case when
balance-alb was specified as bonding module parameter, and not when
balance-alb mode was set using /sys/class/net/*/bonding/mode (the most
common usage).  In the latter case, tlb_dynamic_lb was set up according
to the default mode of the bonding interface, which happens to be
balance-rr.

This additional patch addresses this issue by setting up tlb_dynamic_lb
to 1 if "mode" is set to balance-alb through the sysfs interface.

I didn't add code to change tlb_balance_lb back to the default value for
other modes, because "mode" is usually set up only once during
initialization, and it's not worthwhile to change the static variable
bonding_defaults in bond_main.c to a global variable just for this
purpose.

Commit 8b426dc54c also changes the value of tlb_dynamic_lb for
balance-tlb mode if it is set up using the sysfs interface.  I didn't
change that behavior, because the value of tlb_balance_lb can be changed
using the sysfs interface for balance-tlb, and I didn't like changing
the default value back and forth for balance-tlb.

As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be
written to.  However, I think balance-alb with tlb_dynamic_lb set to 0
is not an intended usage, so there is little use making it writable at
this moment.

Fixes: 8b426dc54c ("bonding: remove hardcoded value")
Reported-by: Reinis Rozitis <r@roze.lv>
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Cc: stable@vger.kernel.org  # v4.12+
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 14:25:16 -07:00
Dmitry Torokhov
39467fc105 Input: ucb1400_ts - fix suspend and resume handling
Instead of stopping the touchscreen we were starting it in suspend, and
disabling it in resume.

Fixes: c899afedf1 ("Input: ucb1400_ts - convert to threaded IRQ")
Reported-by: Anton Volkov <avolkov@ispras.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:56 -07:00
Luca Ceresoli
4701475282 Input: edt-ft5x06 - fix access to non-existing register
reg_addr->reg_report_rate is supposed to exist in M06, not M09.

The driver is written to skip avoids access to non-existing registers
when the register address is NO_REGISTER (0xff). But
reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in
edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do
not work and an access to register 0x00 is done.

Fix by setting reg_addr->reg_report_rate to NO_REGISTER.

Also fix the only place where reg_report_rate is checked against zero
instead of NO_REGISTER.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:41 -07:00
Colin Ian King
4f1b461dd1 Input: elantech - make arrays debounce_packet static, reduces object code size
Don't populate the arrays debounce_packet on the stack, instead make
them static.  Makes the object code smaller by over 870 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  30553	   9152	      0	  39705	   9b19	drivers/input/mouse/elantech.o

After:
   text	   data	    bss	    dec	    hex	filename
  29521	   9312	      0	  38833	   97b1	drivers/input/mouse/elantech.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:40 -07:00
Colin Ian King
023c437a7a Input: surface3_spi - make const array header static, reduces object code size
Don't populate the const array header on the stack, instead make it
static.  Makes the object code smaller by over 180 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6003	   1536	      0	   7539	   1d73	surface3_spi.o

After:
   text	   data	    bss	    dec	    hex	filename
   5726	   1632	      0	   7358	   1cbe	surface3_spi.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:39 -07:00
Sergei A. Trusov
4a54feea17 Input: goodix - add support for capacitive home button
On some x86 tablets with a Goodix touchscreen, the Windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bit 4 of the first byte set, while only the lower 4 bits (0-3) are
used to indicate the number of touches.

Report a KEY_LEFTMETA press when this happens.

Note that the hardware might support more than one button, in which
case the "id" byte of coor_data would identify the button in question.
This is not implemented as we don't have access to hardware with
multiple buttons.

Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:15 -07:00
Stephen Hemminger
8f2bb1de73 hv_netvsc: avoid unnecessary wakeups on subchannel creation
Only need to wakeup the initiator after all sub-channels
are opened.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 14:21:30 -07:00
Stephen Hemminger
8195b1396e hv_netvsc: fix deadlock on hotplug
When a virtual device is added dynamically (via host console), then
the vmbus sends an offer message for the primary channel. The processing
of this message for networking causes the network device to then
initialize the sub channels.

The problem is that setting up the sub channels needs to wait until
the subsequent subchannel offers have been processed. These offers
come in on the same ring buffer and work queue as where the primary
offer is being processed; leading to a deadlock.

This did not happen in older kernels, because the sub channel waiting
logic was broken (it wasn't really waiting).

The solution is to do the sub channel setup in its own work queue
context that is scheduled by the primary channel setup; and then
happens later.

Fixes: 732e49850c ("netvsc: fix race on sub channel creation")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 14:21:30 -07:00
Linus Torvalds
89fd915c40 libnvdimm for 4.14
* Media error handling support in the Block Translation Table (BTT)
   driver is reworked to address sleeping-while-atomic locking and
   memory-allocation-context conflicts.
 
 * The dax_device lookup overhead for xfs and ext4 is moved out of the
   iomap hot-path to a mount-time lookup.
 
 * A new 'ecc_unit_size' sysfs attribute is added to advertise the
   read-modify-write boundary property of a persistent memory range.
 
 * Preparatory fix-ups for arm and powerpc pmem support are included
   along with other miscellaneous fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZtsAGAAoJEB7SkWpmfYgCrzMP/2vPvZvrFjZn5pAoZjlmTmHM
 ySceoOC7vwvVXIsSs52FhSjcxEoXo9cklXPwhXOPVtVUFdSDJBUOIUxwIziE6Y+5
 sFJ2xT9K+5zKBUiXJwqFQDg52dn//eBNnnnDz+HQrBSzGrbWQhIZY2m19omPzv1I
 BeN0OCGOdW3cjSo3BCFl1d+KrSl704e7paeKq/TO3GIiAilIXleTVxcefEEodV2K
 ZvWHpFIhHeyN8dsF8teI952KcCT92CT/IaabxQIwCxX0/8/GFeDc5aqf77qiYWKi
 uxCeQXdgnaE8EZNWZWGWIWul6eYEkoCNbLeUQ7eJnECq61VxVajJS0NyGa5T9OiM
 P046Bo2b1b3R0IHxVIyVG0ZCm3YUMAHSn/3uRxPgESJ4bS/VQ3YP5M6MLxDOlc90
 IisLilagitkK6h8/fVuVrwciRNQ71XEC34t6k7GCl/1ZnLlLT+i4/jc5NRZnGEZh
 aXAAGHdteQ+/mSz6p2UISFUekbd6LerwzKRw8ibDvH6pTud8orYR7g2+JoGhgb6Y
 pyFVE8DhIcqNKAMxBsjiRZ46OQ7qrT+AemdAG3aVv6FaNoe4o5jPLdw2cEtLqtpk
 +DNm0/lSWxxxozjrvu6EUZj6hk8R5E19XpRzV5QJkcKUXMu7oSrFLdMcC4FeIjl9
 K4hXLV3fVBVRMiS0RA6z
 =5iGY
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm from Dan Williams:
 "A rework of media error handling in the BTT driver and other updates.
  It has appeared in a few -next releases and collected some late-
  breaking build-error and warning fixups as a result.

  Summary:

   - Media error handling support in the Block Translation Table (BTT)
     driver is reworked to address sleeping-while-atomic locking and
     memory-allocation-context conflicts.

   - The dax_device lookup overhead for xfs and ext4 is moved out of the
     iomap hot-path to a mount-time lookup.

   - A new 'ecc_unit_size' sysfs attribute is added to advertise the
     read-modify-write boundary property of a persistent memory range.

   - Preparatory fix-ups for arm and powerpc pmem support are included
     along with other miscellaneous fixes"

* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
  libnvdimm, btt: fix format string warnings
  libnvdimm, btt: clean up warning and error messages
  ext4: fix null pointer dereference on sbi
  libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
  dax: fix FS_DAX=n BLOCK=y compilation
  libnvdimm: fix integer overflow static analysis warning
  libnvdimm, nd_blk: remove mmio_flush_range()
  libnvdimm, btt: rework error clearing
  libnvdimm: fix potential deadlock while clearing errors
  libnvdimm, btt: cache sector_size in arena_info
  libnvdimm, btt: ensure that flags were also unchanged during a map_read
  libnvdimm, btt: refactor map entry operations with macros
  libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
  libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
  ext4: perform dax_device lookup at mount
  ext2: perform dax_device lookup at mount
  xfs: perform dax_device lookup at mount
  dax: introduce a fs_dax_get_by_bdev() helper
  libnvdimm, btt: check memory allocation failure
  libnvdimm, label: fix index block size calculation
  ...
2017-09-11 13:10:57 -07:00
Linus Torvalds
66c9457df3 pwm: Changes for v4.14-rc1
The changes for this release include a new driver for the PWM controller
 found on SoCs of the ZTX ZX family. Support for an old SH-Mobile SoC has
 been dropped and the Rockchip and MediaTek drivers gain support for more
 generations.
 
 Other than that there are a bunch of coding style fixes, minor bug fixes
 and cleanup as well as documentation patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlm2fWoZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zofXuD/0WP6F9ZMx3FDpc02PJe7KA
 H634eZXRxjRBMyJ+fWqBf+VZ9uKyA8Qh+lKzve57vzBah8cnp2fRS6MtNxCqhq9T
 kiu9ocsbncF01HuAqBCVZM/TwbPIa8QtDGQ7HlmQ+brdWdXyntjilWmoW+DQuoDT
 hsC/AL+Ih0t9LH8zrtv5wtB92+920M9NUe35up3hrc1qQgHCs+1VwRQ0PUlhlkwF
 xQVop+t6rAtVVHx+mEw3tBQ913Ciy2sJY/BuGkXzTCj1P3i8HrPWE/laVXrn9Kbe
 taTeewCr1IZSnyFY4/0+JPz2/a/kFIa36N0uQop0WGcrKV9cp1Hdjuhqa4joKgdk
 rPrNJ3YQ4ji6U/vsy0FYuWPXfQI8sK7i56oJiRVAOIH0OaI6CTx1nDpRr/eXvqSd
 fVf/zwUIVdzutREqYHVU8WwfYJO//U1zWymsJsfD1hZu/2hSZryjemhIjrmi66gh
 RF+8Q9qrV1KGeLFIEAvRpnZ48yM/NKQxKqf9cBUfQmvELpu3b0ujx1eYmGefPqvu
 1jIQbQ96sZI39geF+qt+FE994v7VZnYiMyhWhtpR8inkw9tfcYs+oGr70Jz+SgFf
 0xV/M0aC7KWsOD7Avh3vqMH+j3tUf3zfK1/a0Jsr3PYLCDlw2WEnaWr5b3mv4YQA
 Ta4B6NVjFz41LD9rZV+68A==
 =GUps
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this release include a new driver for the PWM
  controller found on SoCs of the ZTX ZX family. Support for an old
  SH-Mobile SoC has been dropped and the Rockchip and MediaTek drivers
  gain support for more generations.

  Other than that there are a bunch of coding style fixes, minor bug
  fixes and cleanup as well as documentation patches"

* tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (32 commits)
  pwm: pwm-samsung: fix suspend/resume support
  pwm: samsung: Remove redundant checks from pwm_samsung_config()
  pwm: mediatek: Disable clock on PWM configuration failure
  dt-bindings: pwm: Add MT2712/MT7622 information
  pwm: mediatek: Fix clock control issue
  pwm: mediatek: Fix PWM source clock selection
  pwm: mediatek: Fix Kconfig description
  pwm: tegra: Explicitly request exclusive reset control
  pwm: hibvt: Explicitly request exclusive reset control
  pwm: tiehrpwm: Set driver data before runtime PM enable
  pwm: tiehrpwm: Miscellaneous coding style fixups
  pwm: tiecap: Set driver data before runtime PM enable
  pwm: tiecap: Miscellaneous coding style fixups
  dt-bindings: pwm: tiecap: Add TI 66AK2G SoC specific compatible
  pwm: tiehrpwm: fix clock imbalance in probe error path
  pwm: tiehrpwm: Fix runtime PM imbalance at unbind
  pwm: Kconfig: Enable pwm-tiecap to be built for Keystone
  pwm: Add ZTE ZX PWM device driver
  dt-bindings: pwm: Add bindings doc for ZTE ZX PWM controller
  pwm: bcm2835: Support for polarity setting via DT
  ...
2017-09-11 13:04:32 -07:00
Arkadi Sharshevsky
4400081b63 mlxsw: spectrum: Fix EEPROM access in case of SFP/SFP+
The current code does not handle correctly the access to the upper page
in case of SFP/SFP+ EEPROM. In that case the offset should be local
and the I2C address should be changed.

Fixes: 2ea109039c ("mlxsw: spectrum: Add support for access cable info via ethtool")
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 10:40:59 -07:00
Christoph Hellwig
044a9df1a7 nvme-pci: implement the HMB entry number and size limitations
Adds support for the new Host Memory Buffer Minimum Descriptor Entry Size
and Host Memory Maximum Descriptors Entries field that were added in
TP 4002 HMB Enhancements.  These allow the controller to advertise
limits for the usual number of segments in the host memory buffer, as
well as a minimum usable per-segment size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-09-11 12:29:40 -04:00
Christoph Hellwig
9620cfba97 nvme-pci: propagate (some) errors from host memory buffer setup
We want to catch command execution errors when resetting the device, so
propagate errors from the Set Features when setting up the host memory
buffer.  We keep ignoring memory allocation failures, as the spec
clearly says that the controller must work without a host memory buffer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
2017-09-11 12:29:39 -04:00
Akinobu Mita
30f92d62e5 nvme-pci: use appropriate initial chunk size for HMB allocation
The initial chunk size for host memory buffer allocation is currently
PAGE_SIZE << MAX_ORDER.  MAX_ORDER order allocation is usually failed
without CONFIG_DMA_CMA.  So the HMB allocation is retried with chunk size
PAGE_SIZE << (MAX_ORDER - 1) in general, but there is no problem if the
retry allocation works correctly.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
2017-09-11 12:29:38 -04:00
Christoph Hellwig
92dc689563 nvme-pci: fix host memory buffer allocation fallback
nvme_alloc_host_mem currently contains two loops that are interwinded,
and the outer retry loop turns out to be broken.  Fix this by untangling
the two.

Based on a report an initial patch from Akinobu Mita.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
2017-09-11 12:29:37 -04:00
Christoph Hellwig
608cc4b14a nvme: fix lightnvm check
nvme_nvm_ns_supported assumes every device is a pci_dev, which leads to
reading an incorrect field, or possible even a dereference of unallocated
memory for fabrics controllers.

Fix this by introducing a quirk for lighnvm capable devices instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-09-11 12:29:36 -04:00
Mikulas Patocka
c3ca015fab dax: remove the pmem_dax_ops->flush abstraction
Commit abebfbe2f7 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.

It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().

It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.

Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.

Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 11:00:55 -04:00
Arnd Bergmann
b5e8ad92c3 dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK
The new lockdep support for completions causeed the stack usage
in dm-integrity to explode, in case of write_journal from 504 bytes
to 1120 (using arm gcc-7.1.1):

drivers/md/dm-integrity.c: In function 'write_journal':
drivers/md/dm-integrity.c:827:1: error: the frame size of 1120 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The problem is that not only the size of 'struct completion' grows
significantly, but we end up having multiple copies of it on the stack
when we assign it from a local variable after the initial declaration.

COMPLETION_INITIALIZER_ONSTACK() is the right thing to use when we
want to declare and initialize a completion on the stack. However,
this driver doesn't do that and instead initializes the completion
just before it is used.

In this case, init_completion() does the same thing more efficiently,
and drops the stack usage for the function above down to 496 bytes.
While the other functions in this file are not bad enough to cause
a warning, they benefit equally from the change, so I do the change
across the entire file. In the one place where we reuse a completion,
I picked the cheaper reinit_completion() over init_completion().

Fixes: cd8084f91c ("locking/lockdep: Apply crossrelease to completions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 11:00:54 -04:00
Bhumika Goyal
7c373d6604 dm integrity: make blk_integrity_profile structure const
Make this structure const as it is only stored in the profile field of a
blk_integrity structure. This field is of type const, so make structure
as const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 11:00:53 -04:00
Hyunchul Lee
b7e326f7b7 dm integrity: do not check integrity for failed read operations
Even though read operations fail, dm_integrity_map_continue() calls
integrity_metadata() to check integrity.  In this case, just complete
these.

This also makes it so read I/O errors do not generate integrity warnings
in the kernel log.

Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Acked-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 10:07:34 -04:00
Josef Bacik
228bb5b260 dm log writes: fix >512b sectorsize support
512b sectors vs device's physical sectorsize was not maintained
consistently and as such the support for >512b sector devices has bugs.
The log metadata expects native sectorsize but 512b sectors were being
stored.  Also, device's sectorsize was assumed when assigning the
bi_sector for blocks that were being logged.

Fix this up by adding two helpers to convert between bio and dev
sectors, and use these in the appropriate places to fix the problem and
make it clear which units go where.  Doing so allows dm-log-writes use
with 4k devices.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 10:03:12 -04:00
Josef Bacik
0c79c62021 dm log writes: don't use all the cpu while waiting to log blocks
The check to see if the logging kthread needs to go to sleep is wrong,
it checks lc->pending_blocks, which will be non-0 if there are any
blocks that are pending, whether they are ready to be logged or not.
What we really want is to go to sleep until it's time to log blocks, so
change this check so we do actually go to sleep in between flushes.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11 09:50:46 -04:00
Linus Torvalds
f007cad159 Revert "firmware: add sanity check on shutdown/suspend"
This reverts commit 81f9507628.

It causes random failures of firmware loading at resume time (well,
random for me, it seems to be more reliable for others) because the
firmware disabling is not actually synchronous with any particular
resume event, and at least the btusb driver that uses a workqueue to
load the firmware at resume seems to occasionally hit the "firmware
loading is disabled" logic because the firmware loader hasn't gotten the
resume event yet.

Some kind of sanity check for not trying to load firmware when it's not
possible might be a good thing, but this commit was not it.

Greg seems to have silently suffered the same issue, and pointed to the
likely culprit, and Gabriel C verified the revert fixed it for him too.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Pointed-at-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Gabriel C <nix.or.die@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-10 21:19:06 -07:00
Linus Torvalds
e90937e756 ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
 window. This time around, 559 patches affecting both 32- and 64-bit
 platforms.
 
 Changes are too many to list individually, but some of the larger ones:
 
 New platform/SoC support:
 
  - Automotive:
    + Renesas R-Car D3 (R8A77995)
    + TI DT76x
    + MediaTek mt2712e
  - Communication-oriented:
    + Qualcomm IPQ8074
    + Broadcom Stingray
    + Marvell Armada 8080
  - Set top box:
    + Uniphier PXs3
 
 Besides some vendor reference boards for the SoC above, there are also several
 new boards/machines:
 
  - TI AM335x Moxa UC-8100-ME-T open platform
  - TI AM57xx Beaglebone X15 Rev C
  - Microchip/Atmel sama5d27 SoM1 EK
  - Broadcom Raspberry Pi Zero W
  - Gemini-based D-Link DIR-685 router
  - Freescale i.MX6:
    + Toradex Apalis module + Apalis and Ixora carrier boards
    + Engicam GEAM6UL Starter Kit
  - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
  - Mediatek mt7623-based BananaPi R2
  - Several Allwinner-based single-board computers:
   + Cubietruck plus
   + Bananapi M3, M2M and M64
   + NanoPi A64
   + A64-OLinuXino
   + Pine64
  - Rockchip RK3328 Pine64/Rock64 board support
  - Rockchip RK3399 boards:
   + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
   + Theobroma Systems RK3399-Q7 SoM
  - ZTE ZX296718 PCBOX Board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdtjAAoJEIwa5zzehBx3PzgP/iCQyUk5wklG9E5YNl8a9m/o
 djBkelabTm52s5ZTu6Awsq5rx8jUMqcb0vo+9v9yPWFG6On2oTZyZ/rE1Wbj3+gG
 +ENVyRgxmzYDTXqQLiu1UOV9wSA0gHwQCRZvE7i32NNfLu+tAsvu9e/AuznQ1xhR
 4G7dGCRRlRkZkrVKrJ7JjklmW578pFQkZLmz8K2nWqwh1tKpK3fY19SrwUKx+YCR
 tnMPYAPjB5zxR9tfcDS4FUKdiC7dMiMzZNGiYl5a26X6wsNR7xYtNzFMaGZn1ecG
 PwOS+DAnj8J+AfpQBLWu9xytHbJdqITRuNcF+OXNVW9TKmb0syf7VgRUDkhjIMxP
 aGZc4Q6PwgTRwnX+w6fTzJTyk+uXtieCicZaaZ1jlgcQq0pfbzJ1vZMpq4aoVlxU
 mS84i1bd8AiavmHuyIRNB3/T4aAsVhTUIBndXluKV8yWroXhAukfI1YmGr1Eux7C
 fy5pPeDqk9lXR3bqIhfnaLoVsApEXTOWMC8X48vwfaQHiCGR9JJwpfsGcaNi1bri
 Col1qRzkXWGA6KqTWtpo+o12rYuMGc0mpZTCmejKuBoxMXOU+wLyJYgaxa7pyesX
 S5rLaIe2l9ppXHjjEERp7AzczzLS5W20Tez5vYnZAQb1dYuJzwXwiATt8NT+XG3V
 Wu92UwUfjxYk8vGz48ph
 =R45j
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...
2017-09-10 20:54:48 -07:00
Linus Torvalds
ae46654bcf ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
 
 Among them:
 
  - Reset driver updates:
   + New API for dealing with arrays of resets
   + Make unimplemented {de,}assert return success on shared resets
   + MSDKv1 driver
   + Removal of obsolete Gemini reset driver
   + Misc updates for sunxi and Uniphier
 
  - SoC drivers:
   + Platform SoC driver registration on Tegra
   + Shuffle of Qualcomm drivers into a submenu
   + Allwinner A64 support for SRAM
   + Renesas R-Car R3 support
   + Power domains for Rockchip RK3366
 
  - Misc updates and smaller fixes for TEE and memory driver subsystems
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdt7AAoJEIwa5zzehBx3EboP/jR2T9lrMavXR1zL48L14yJb
 S+fiJlrX1Kr42UF4PQvsfs+uTqOLmycrPVFkMb6IwoUPzQ9UCOSoiMzYm2b7ZPvt
 uIesHhdM3/xun6wKfieN8GmNA1yDVynTxo0TTYDw5ha7I6s2GHgw0GSFzy3wm0Qg
 KzerAO3gzf3L5XsKR0cai3IXNjHO9ubpFG1ReR09da28nPElP8ggWg0KnqdO76Ch
 BGpFj78EC875ZNqwHgnspUqgGDJnBjig3m/uA4FWA0G9Jl38tCyKTZfUR7cEraoV
 kyCgBlR/UrI8eXVTyEy5k5iTsQ3A1VhX4rGjyH+5NZHTs1yWr4+RDND/qeGl9tSo
 VASuOtH6Rc3vdUDpHPBNAFNQH8fwwDoKf96dvN1tiffsx6LSKb//NyOfkXzKOtR6
 CP5raYfX4YktLtHq0XVTZ/6r3XmLcTHzElR/dCFpQOFcTOYii0pWtfcWouahbZ1w
 dhoBX/dbNq37MfzrxtHN2VTIEHpn2GU7u+ZGkp2ArokD58BAft/M3Xee1cDnF75g
 ZDwe5eNFT8aBZKaY7zwG8cdxiw9kACAivDRwW+zgpfUr39c+d0+QmVfnfJh4EGXK
 Ri6yr2EfBWK6jw3cwkdSyyt7iSzIkB+RiuuD1MjpYhWzAvoDpzqkXYukFGbpXnuy
 vUFHNuP1ocUsRtCs8mm1
 =yBzS
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...
2017-09-10 20:40:00 -07:00
Linus Torvalds
7f1b9be13a ARM/arm64: SoC platform updates for v4.14
This branch contains platform updates for 32- and 64-bit ARM,
 including defconfig updates to enable new options, drivers and
 platforms. There are also a few fixes and cleanups for some existing vendors.
 
 Some of the things worth highlighting here are:
 
  - Enabling new crypt drivers on arm64 defconfig
  - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
  - Debug support enabled for Renesas r8a7743
  - Various config updates for Renesas platforms (sound, USB, other drivers)
  - Platform support (including SMP) for TI dra762
  - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdXjAAoJEIwa5zzehBx3ExIQAJQ6anSZlkGysXqptA4c1HuL
 vgGq/U5xZ1Wa4Z/YX7//wuCMwRClc1j/zSJ5PP+wP0YsaviN7iF/8H1P/HQtCiTT
 DcEQPSI770829wzW4oMNW0PyU/ZnWMtuiMB+FAjdPVjbS8bT4PIK72D8PYKrT7f8
 8bU51+QezjSLamQaA8S2RyX+kYI/4znTa/9Aco4AlCtioV8h9gQanFYd2EI/EMhU
 1uvR3xUFf/YK49+M5J6m3DvtFffllHU9TKV/EAQD1Bhl1s5VPfem+a8JbVh1m7M+
 NzQOOoPJ9jYOGfjlaQQVmZ/1E4iKac1oK4x44Djk/i+RFjl+AT/2co3RcaEq9Npw
 5HNsK8ujnjzWB3xHu5wK5CbrjLNYco9hOpJaGkSeClo4ElDJVSKxyqWkZuhhnSA8
 bXXV5VraMX67tjG7Ou8+NtdbMkGdOUqnNbuBlCxkxpWxhtaUQG1YHHQDofUXNguy
 rtVhKRZRSkNYrp4lDCKCXVFFO077FGzP2Boq6JVzLv+U1l6JlZkkr3EWKYMY45HC
 o2rVcAB4lMR/k6tqE5MAmQC53jCNlFZt2xtf1WRVKf+0TfBVIGX3MxvFxl4E9wA+
 9pdJ9ujZWsPjTcZcktA6AsaK7uevRxcB2YZYv4pXVjR1RcZ/SfiEf4UW+md3j4QB
 igKej5WsRiCPwnkMFKs0
 =g8cF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
  contains platform updates for 32- and 64-bit ARM, including defconfig
  updates to enable new options, drivers and platforms. There are also a
  few fixes and cleanups for some existing vendors.

  Some of the things worth highlighting here are:

   - Enabling new crypt drivers on arm64 defconfig

   - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig

   - Debug support enabled for Renesas r8a7743

   - Various config updates for Renesas platforms (sound, USB, other
     drivers)

   - Platform support (including SMP) for TI dra762

   - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
     DMA code"

* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: multi_v7_defconfig: make eSDHC driver built-in
  arm64: defconfig: enable rockchip graphics
  MAINTAINERS: Update Cavium ThunderX2 entry
  ARM: config: aspeed: Add I2C, VUART, LPC Snoop
  ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
  ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
  ARM: davinci_all_defconfig: enable tinydrm and ST7586
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
  ARM: defconfig: tegra: Enable ChipIdea UDC driver
  ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
  ARM: tegra: Add Tegra I2S interfaces to defconfig
  ARM: tegra: Update default configuration for v4.13-rc1
  MAINTAINERS: update ARM/ZTE entry
  soc: versatile: remove unnecessary static in realview_soc_probe()
  ARM: Convert to using %pOF instead of full_name
  ARM: hisi: Fix typo in comment
  ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add recently added crypto drivers as modules
  arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
  ...
2017-09-10 20:35:46 -07:00
Linus Torvalds
d719518d9c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:

 1) Use register window state adjustment instructions when available,
    from Anthony Yznaga.

 2) Add VCC console concentrator driver, from Jag Raman.

 3) Add 16GB hugepage support, from Nitin Gupta.

 4) Support cpu 'poke' hypercall, from Vijay Kumar.

 5) Add M7/M8 optimized memcpy/memset/copy_{to,from}_user, from Babu
    Moger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (33 commits)
  sparc64: Handle additional cases of no fault loads
  sparc64: speed up etrap/rtrap on NG2 and later processors
  sparc64: vcc: make ktermios const
  sparc: leon: grpci1: constify of_device_id
  sparc: leon: grpci2: constify of_device_id
  sparc64: vcc: Check for IS_ERR() instead of NULL
  sparc64: Cleanup hugepage table walk functions
  sparc64: Add 16GB hugepage support
  sparc64: Support huge PUD case in get_user_pages
  sparc64: vcc: Add install & cleanup TTY operations
  sparc64: vcc: Add break_ctl TTY operation
  sparc64: vcc: Add chars_in_buffer TTY operation
  sparc64: vcc: Add write & write_room TTY operations
  sparc64: vcc: Add hangup TTY operation
  sparc64: vcc: Add open & close TTY operations
  sparc64: vcc: Enable LDC event processing engine
  sparc64: vcc: Add RX & TX timer for delayed LDC operation
  sparc64: vcc: Create sysfs attribute group
  sparc64: vcc: Enable VCC port probe and removal
  sparc64: vcc: TTY driver initialization and cleanup
  ...
2017-09-10 09:57:23 -07:00
Linus Torvalds
4dfc278803 IOMMU Updates for Linux v4.14
Slightly more changes than usual this time:
 
 	- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now
 	  tries to preserve the mappings of the kernel so that master
 	  aborts for devices are avoided. Master aborts cause some
 	  devices to fail in the kdump kernel, so this code makes the
 	  dump more likely to succeed when AMD IOMMU is enabled.
 
 	- Common flush queue implementation for IOVA code users. The
 	  code is still optional, but AMD and Intel IOMMU drivers had
 	  their own implementation which is now unified.
 
 	- Finish support for iommu-groups. All drivers implement this
 	  feature now so that IOMMU core code can rely on it.
 
 	- Finish support for 'struct iommu_device' in iommu drivers. All
 	  drivers now use the interface.
 
 	- New functions in the IOMMU-API for explicit IO/TLB flushing.
 	  This will help to reduce the number of IO/TLB flushes when
 	  IOMMU drivers support this interface.
 
 	- Support for mt2712 in the Mediatek IOMMU driver
 
 	- New IOMMU driver for QCOM hardware
 
 	- System PM support for ARM-SMMU
 
 	- Shutdown method for ARM-SMMU-v3
 
 	- Some constification patches
 
 	- Various other small improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZtCFNAAoJECvwRC2XARrjZnQP/AxC/ezQpq82HbegF4sM/cVE
 Ep7TeTqodEl75FS/6txe2wU0pwodqk/LB9ajfQZUbE1w8vKsNEqi5qf4ZYHGoxYI
 5bWyjJBzKIlwENH5lsBpQNt6XLevrYmRsFy7F0tRYy+qPQq8k+js2i7/XkCL3q7L
 3xklF847RRoITaTOhhaROx1pF23dSMEsS2XGuWHcZfjORtep4wcFKzd/2SvlCWCo
 P2bRU7jBzfJuuGSA80gaiUbDmrULTUfYuZNp7njASzCgsDmagERtvDEpdoXPNNSp
 u6s4LjU1Dp3fgr6g6cFRO7B6JUbWd619nwo9so/c/wZN54yEngBF9EyeeF3mv2O5
 ZbM2mOW3RlZcjxFT/AC8G4cZwwP6MpCEQOdqknoqc6ZQwcDqwN0o9I4+po0wsiAU
 89ijZZe9Mx0p9lNpihaBEB1erAUWPo5Obh62zo80W3h6x9WzkGQWM+PyFK2DYoaC
 8biEZzcc21sLEHvXQkcEGJSKrihHr9sluOqvxmCw5QAkYIFAeZRoeH7JtZWjVCnr
 T3XvaG1G1Aw6tS7ErxufdKawREAGki0Rm9i1baiH9sqNj5rllM01Y+PgU6E21Nbg
 iZp9gJLjfwM4vhYLlovvQK5PRoOBsCkyCpEI4GJqjLeam5p/WN06CFFf0ifQofYr
 qDPCVDkWHWV8nugFFKE7
 =EVh9
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Slightly more changes than usual this time:

   - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
     to preserve the mappings of the kernel so that master aborts for
     devices are avoided. Master aborts cause some devices to fail in
     the kdump kernel, so this code makes the dump more likely to
     succeed when AMD IOMMU is enabled.

   - common flush queue implementation for IOVA code users. The code is
     still optional, but AMD and Intel IOMMU drivers had their own
     implementation which is now unified.

   - finish support for iommu-groups. All drivers implement this feature
     now so that IOMMU core code can rely on it.

   - finish support for 'struct iommu_device' in iommu drivers. All
     drivers now use the interface.

   - new functions in the IOMMU-API for explicit IO/TLB flushing. This
     will help to reduce the number of IO/TLB flushes when IOMMU drivers
     support this interface.

   - support for mt2712 in the Mediatek IOMMU driver

   - new IOMMU driver for QCOM hardware

   - system PM support for ARM-SMMU

   - shutdown method for ARM-SMMU-v3

   - some constification patches

   - various other small improvements and fixes"

* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/vt-d: Don't be too aggressive when clearing one context entry
  iommu: Introduce Interface for IOMMU TLB Flushing
  iommu/s390: Constify iommu_ops
  iommu/vt-d: Avoid calling virt_to_phys() on null pointer
  iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
  arm/tegra: Call bus_set_iommu() after iommu_device_register()
  iommu/exynos: Constify iommu_ops
  iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
  iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
  iommu/amd: Rename a few flush functions
  iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
  iommu/mediatek: Fix a build warning of BIT(32) in ARM
  iommu/mediatek: Fix a build fail of m4u_type
  iommu: qcom: annotate PM functions as __maybe_unused
  iommu/pamu: Fix PAMU boot crash
  memory: mtk-smi: Degrade SMI init to module_init
  iommu/mediatek: Enlarge the validate PA range for 4GB mode
  iommu/mediatek: Disable iommu clock when system suspend
  iommu/mediatek: Move pgtable allocation into domain_alloc
  iommu/mediatek: Merge 2 M4U HWs into one iommu domain
  ...
2017-09-09 15:03:24 -07:00
Linus Torvalds
a59e57da49 MTD changes for 4.14:
General updates:
  * Constify pci_device_id in various drivers
  * Constify device_type
  * Remove pad control code from the Gemini driver
  * Use %pOF to print OF node full_name
  * Various fixes in the physmap_of driver
  * Remove unused vars in mtdswap
  * Check devm_kzalloc() return value in the spear_smi driver
  * Check clk_prepare_enable() return code in the st_spi_fsm driver
  * Create per MTD device debugfs enties
 
 NAND updates, from Boris Brezillon:
  * Fix memory leaks in the core
  * Remove unused NAND locking support
  * Rename nand.h into rawnand.h (preparing support for spi NANDs)
  * Use NAND_MAX_ID_LEN where appropriate
  * Fix support for 20nm Hynix chips
  * Fix support for Samsung and Hynix SLC NANDs
  * Various cleanup, improvements and fixes in the qcom driver
  * Fixes for bugs detected by various static code analysis tools
  * Fix mxc ooblayout definition
  * Add a new part_parsers to tmio and sharpsl platform data in order to
    define a custom list of partition parsers
  * Request the reset line in exclusive mode in the sunxi driver
  * Fix a build error in the orion-nand driver when compiled for ARMv4
  * Allow 64-bit mvebu platforms to select the PXA3XX driver
 
 SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
  * add support to the JEDEC JESD216B specification (SFDP tables).
  * add support to the Intel Denverton SPI flash controller.
  * fix error recovery for Spansion/Cypress SPI NOR memories.
  * fix 4-byte address management for the Aspeed SPI controller.
  * add support to some Microchip SST26 memory parts
  * remove unneeded pinctrl header Write a message for tag:
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZrav6Ixxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcABwkP/joDrq09RIC9n5gP+ubJe6O1jKvNWDd6bIVXD3Ke
 73R0a0ANwwWlNYWTChTdrb8UeewVS1bzutyy5O2Sbdb6Jc6s7xkfQDTsbET2HWOK
 S7Lt/zjlC6/6cow59B6h43PGS6wmIFaZD3K+70sGhvFnV8epVUzS2Aa783xS8LXm
 so2djZOdUYnW+yE0eho24VQR6nS4YP4Vc+7Mm9skjU0ifjB9mJiWRkzoQnqIgORO
 M+Iab+qjDs9KR/edWh6mZtnvjps0VSW4I40YsClpcgIn550w1DSXe4u6/8Nk+2Bp
 gfrALls91gob0ocxmEdIyLID+M0410HcN/Lvh36nw+tkkGTaXf0D6mkqzdKNrZ3w
 yz+UV9uf19kr1c6zFGcCvUlD0btn9KT+F2legnhgURtwUyDFQcaYQlkpDIeEzUMV
 ZrtzKbSE2v9810YKXjtCnseewdP+Eph/ewN6ODX5yg/fs8K0fyQYTRtYYM50U69X
 md8zznBBDPhJVu5T2Of7my9V1SxvCP8a7LrKjAXuFHpZ/CHiPe+QOWBgG2L+zXXT
 e10/rTg7T2pcyKpBvL/3/mCYeJ+Iup3lKT1EHGCXcKnLGecVgOsbvdG+JnvQMI2J
 FLmu1exvrzi0Gcrs/05hqwyUvkHZ5FB1a+heNOtmQ+h1U0ElXqILyu7brzghupRe
 3phO
 =UgCd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...
2017-09-09 14:48:21 -07:00
Linus Torvalds
0ce5c79f38 power supply and reset changes for the v4.14 series
* New chip/feature support
  - bq27xxx: support updating battery config from DT
  - bq24190: support loading battery charge info from DT
  - LTC2941: add LTC2942/LTC2944 support
  - max17042: add ACPI support
  - max1721x: new driver
 * Misc
  - Move bq27xxx w1 driver from w1 into power-supply subsystem
  - Introduce power_supply_set_input_current_limit_from_supplier
  - constify stuff
  - some minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlmxSSQACgkQ2O7X88g7
 +ppf2xAAliDRdNPuxpKu69syiX+iNPaPHTqRXd41sAJlEX2IYv/avcoNFcGySplR
 gJYdlbx2Qd86aBaMf92h4tGihk2iNa87It9xkA+JgO3wNoKiZ+b5lk///IDk8aDF
 8sknSTXJtGYse0jwBRKTT4cL1ZW/g10heUxPr8AiX8nL4QhMf0TIxXawWQteAZDE
 dDz/UEAqbINooD5HtP716Z0e3U6FyWTqFc6UzuR+n8c6wC6n/JA6h91ASAHUmExT
 aH1JuQyrmucBp8cLhP01ThSkoIdGbcZM7nJ3WQBlfDricFJXa/yThug/mHvjztJX
 3U1UOZBqsb/LL9Dh5hl/D3+i+7qI29KCyUZiYUrwoiSjxM/AtOB2t4cAWmU7+PnJ
 V3coYC1s2DlwYcLIUiyE2zmVWIDcOuuOJhQjCdpUBTPvz83nQ0v5oXMn7VnQmWlO
 8Z/IRWnW90v2D2iHmSPAwFG3ATfH0pAP8G/4Wrudti+ymSxAhXaLqQcj3HHjKjvI
 3CEGOPAN9Opuof7SfkIVuoOjPzazx5GUpAZQKi8LS87KRdXN4ics3vbNB6VBDR50
 FzVhJJZBTeAOJCDogInuu4gDa0L5Ikfdkhqc+nvNfcdsE2k3H8Nb//+UPiPnfgEA
 mEFyp9gaY08/3ylDEHxp3N/W7POrL4QelTjv0dvdKW70i7KtWpA=
 =iy5f
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...
2017-09-09 14:44:39 -07:00
Linus Torvalds
7151202b64 rpmsg updates for v4.14
This extends the Qualcomm GLINK implementation to support the additional
 features used for communicating with modem and DSP coprocessors in modern
 Qualcomm platforms.
 
 In addition to this there's support for placing virtio RPMSG buffers in
 non-System RAM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZswd9AAoJEAsfOT8Nma3FSigQALyq2wNtf60tkTKW0f2K8cM6
 JpnEKAKqO1t5ZkokEevT05PLT4rqXuidrDVOBJ3VQ7LtSqJOiTjGyN9YM8t+WBVG
 ts0Yg69+wUxBATg9iM2JiUsKn8gH8swUAtf16dmkL/Ca8BJKOHGYTUjADfwuFrEg
 EAGcLZnlwz736xdo9qZu/Ke9rItz6CDOD3AphbpJbcv7Wj2F/mEuqMZjfLk+1Mo8
 C3wXx9jIzW1siNtT0OY9raUNV5gLaGS2zZ+DYwrwjND7Eh0TqeLxyJ1OS7f2kOZ5
 P6zcrYw02WbDVW7LUzVegj5PejZm/wdFZ5hSvishEfZZVT+wGHBK34mfObe0moJZ
 Wp8jFSXKqECIEU3x/2DtPAHi+mittDpQ3FCkElWKJRD6B3HTySHjvM0lOor+zYKB
 gRX4QUR6jwkSRAbV6GP24Z8SL9kU6TXOSoOQvuzuKhB30JzADJPuQnGZR0SftYiH
 YJG/RT9FklbljWP9hIgey3QPNHPoL3IzNBU2iyEjdraabmNaFEb++wpLdpCZdnGf
 1HMLrMfUmd3QKRtXvT+5Q6CjnfzwFk1ii1naN3Ky9rar3WRtij5bzo8eveR8i9ag
 DtWA88N9mnpSUao14o5vKN830q3/fkwW6HyT0nCd59Wq94cMNfiMdFPVXvO0xVAF
 mjP4JXHbqNhdJySWR4Du
 =PVGN
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
 "This extends the Qualcomm GLINK implementation to support the
  additional features used for communicating with modem and DSP
  coprocessors in modern Qualcomm platforms.

  In addition to this there's support for placing virtio RPMSG buffers
  in non-System RAM"

* tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc: (29 commits)
  rpmsg: glink: initialize ret to zero to ensure error status check is correct
  rpmsg: glink: fix null pointer dereference on a null intent
  dt-bindings: soc: qcom: Extend GLINK to cover SMEM
  remoteproc: qcom: adsp: Allow defining GLINK edge
  rpmsg: glink: Export symbols from common code
  rpmsg: glink: Release idr lock before returning on error
  rpmsg: glink: Handle remote rx done command
  rpmsg: glink: Request for intents when unavailable
  rpmsg: glink: Use the intents passed by remote
  rpmsg: glink: Receive and store the remote intent buffers
  rpmsg: glink: Add announce_create ops and preallocate intents
  rpmsg: glink: Add rx done command
  rpmsg: glink: Make RX FIFO peak accessor to take an offset
  rpmsg: glink: Use the local intents when receiving data
  rpmsg: glink: Add support for TX intents
  rpmsg: glink: Fix idr_lock from mutex to spinlock
  rpmsg: glink: Add support for transport version negotiation
  rpmsg: glink: Introduce glink smem based transport
  rpmsg: glink: Do a mbox_free_channel in remove
  rpmsg: glink: Return -EAGAIN when there is no FIFO space
  ...
2017-09-09 14:34:38 -07:00
Dan Carpenter
1f4f554a72 net: qualcomm: rmnet: Fix a double free
There is a typo here so we accidentally free "skb" instead of "skbn".
It leads to a double free and a leak.  After discussing with Subash,
it's better to just move the check before the allocation and avoid the
need to free.

Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-09 14:33:27 -07:00
Linus Torvalds
d7efc352ab remoteproc updates for v4.14
This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI
 Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the
 Qualcomm restart notifier and a few fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZswmrAAoJEAsfOT8Nma3FVAwP/1SEQkDsfrx9HIVtm9zSy7h5
 DJ2dAUVMATJkTiDU8djz/KttL9bOLIcG5u0hiNbtPELm/5t3qAHiN8axO0w5Oxrv
 0xO2yIwzxyhOU4cI8k+RWReTcihSqBYs5nHDXXhbhO5IKiaIfAQWljL6H1rL41gH
 SnKEuQuXfD6j/cvRyHEh10EWfDrVMnaim9aK3OiSz6i6YRyRC3r2VT+KiRnbaLq0
 XIk1HATM6xEd6YfAeiuPZh6SbKuEibsBoPVQpAl9HjZvKY+n1dC11solohAEMYFC
 r222I6LYPRy5eteLnSqhTYof5l+pd9/eECIuXCdvxGfbkPhyPf7/K3WI3iV9sD8a
 h+QM22IpiwSzxnJPNJzmYtPnhqfOHZQTb64Fp2xiTTYa/ILbSH7VCAohxofEaheS
 8rtIJqGhxT1WINvcBaoxwhL/CMMnBL+TlrqlAc5Qjd9zKFhJu4rcv1oQFNGMBMrN
 WY4R4x//oYgfmagIBEkmxMEcVMoJeI34AsbtSvazmcIQdvpcJ3Y0AMa+Ly0eyzBf
 RoTJY9y/Q3Y2DjcJoK+6iFeGRo0qI8/ytkKC6wb3RpaTnbDQ39X3GfCICwhsDCh7
 uv19AmG5M26VRHxjlNnLpJp8jG3Up335TYQhkXV/CZYZcOxTmfJjGe3ItxOK/tTz
 YMv+IR72T/M+feeAS4Ge
 =R9dP
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v4.14' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP,
  TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It
  introduces the Qualcomm restart notifier and a few fixes"

* tag 'rproc-v4.14' of git://github.com/andersson/remoteproc:
  remoteproc: Introduce rproc handle accessor for children
  remoteproc: qcom: Make ssr_notifiers local
  remoteproc: Stop subdevices in reverse order
  remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver
  remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver
  remoteproc: qcom: Use PTR_ERR_OR_ZERO
  remoteproc: st: explicitly request exclusive reset control
  remoteproc: qcom: explicitly request exclusive reset control
  remoteproc/keystone: explicitly request exclusive reset control
  remoteproc/keystone: Add support for Keystone 66AK2G SOCs
  remoteproc/davinci: Add device tree support for OMAP-L138 DSP
  dt-bindings: remoteproc: Add bindings for Davinci DSP processors
  remoteproc/davinci: Add support to parse internal memories
  remoteproc/davinci: Switch to platform_get_resource_byname()
  remoteproc: make device_type const
  soc: qcom: GLINK SSR notifier
  remoteproc: qcom: Add support for SSR notifications
  remoteproc: Merge __rproc_boot() with rproc_boot()
2017-09-09 14:30:50 -07:00
Linus Torvalds
8c1d70b2de VFIO updates for v4.14-rc1
- Base MSI remapping on either IOMMU domain or IRQ domain support
    (Robin Murphy)
 
  - Prioritize hardware MSI regions over software defined regions
    (Robin Murphy)
 
  - Fix no-iommu reference counting (Eric Auger)
 
  - Stall removing last device from group for container cleanup
    (Alex Williamson)
 
  - Constify amba_id (Arvind Yadav)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZstOJAAoJECObm247sIsih4AQAJKsgQlwtC0mnI5l/RFN1cP7
 cFa3xusuCYAMhJ1IOo23rWsvnM1Me8lFPCoYWQ2iiPYya7ceyT7I1A8cX92m+XOG
 phyCmG4gurWAHWk/9WTtWUi0s+lss6pDNsgAGoWYoACwD4Wm81h3S73rWphfH34y
 khYYmC6JojJ+V3CpgXrdnofPKZd0LHoSZZSo5rqK2hmuLc/75Y5tTMYHR+PnjJkS
 cz4hXNou2ngpnjESSb825+hroLTQpDZPyDn6iL3F0+qMci52Zl3jRFF0SvdJ8cBe
 1kx8o9Rnx8mNlS+JqdVQHE/mRMZZLf20HmdPbGwfi5lzfdg7Z6dLNUsgemHy7RQY
 4lHXLIO46i5LnCneRTOgKJri/L1ocB9z0u3uyVaQOxoi+PacrlkKMlQZyl3XU22f
 YWdTEaWdGjIIYbosdhkvnIx7hOlbomNgdsjmc3qGQbixJSnZ02PH8VeywSAbBvfl
 AtAHu5ktMulgfTicsy16PycBfrNsirLoobGVFCosKDpCAuixOm2YmyUHAaHubXBV
 XgWbmsoEySL4wy3j0g+JRUFejN20ZulY24kLSOehKKfY5zX2k/TsJ2DsOfgSqBvR
 dPGcwvll1/LayCRICxPhIrEunuk8hnClCvlc1kQ9LC1MFC2yHXXG6oAfYbu7gno8
 1XFOeVZ1ITVP0677H1LA
 =T3/q
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.14-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Base MSI remapping on either IOMMU domain or IRQ domain support
   (Robin Murphy)

 - Prioritize hardware MSI regions over software defined regions (Robin
   Murphy)

 - Fix no-iommu reference counting (Eric Auger)

 - Stall removing last device from group for container cleanup (Alex
   Williamson)

 - Constify amba_id (Arvind Yadav)

* tag 'vfio-v4.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: platform: constify amba_id
  vfio: Stall vfio_del_group_dev() for container group detach
  vfio: fix noiommu vfio_iommu_group_get reference count
  vfio/type1: Give hardware MSI regions precedence
  vfio/type1: Cope with hardware MSI reserved regions
2017-09-09 14:28:45 -07:00
Linus Torvalds
d2d8f51e28 Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...
2017-09-09 14:18:40 -07:00
Linus Torvalds
ad9a19d003 More RDMA work and some op-structure constification from Chuck Lever,
and a small cleanup to our xdr encoding.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZst0LAAoJECebzXlCjuG+o30QALbchoIvs7BiDrUxYMfJ2nCa
 7UW69STwX79B3NZTg7RrScFTLPEFW9DMpb/Og7AYTH3/wdgGYQNM1UxGUYe7IxSN
 xemH7BSmQzJ7ryaxouO/jskUw5nvNRXhY0PMxJApjrCs837vTjduIVw9zUa8EDeH
 9toxpTM4k3z/1myj60PuHnuQF9EyLDL6W581loDF04nQB3pVRbAZOh1lUeqMgLUd
 7IF+CDECFcjL7oZSA3wDGpsVySLdZ+GYxloFIDO/d8kHEsZD3OaN2MdfRki8EOSQ
 qibTYO0284VeyNLUOIHjspqbDh0Lr2F7VolMmlM5GF1IuApih0/QYidqsH6/As3U
 JIAK53vgqZfK2qI0ud7dGGFEnT/vlE7pQiXiza36xI8YZu4Xz6uGbM41p38RU8jO
 3fr38xdPqqO7YE6F7ZUHYyrmW81Vi0lFdQkw1DBEipHV8UquuCmdtAeR9xgDsdQ/
 LsMVevM1mF+19krOIGbBnENq1GX78ecfHEYGxlTjf/MeO4JYl+8/x7Ow2e/ZbwSa
 7hpUeCiVuVmy1hqOEtraBl5caAG0hCE8PeGRrdr5dA6ZS9YTm0ANgtxndKabwDh2
 CjXF3gRnQNUGdFGCi/fmvfb89tVNj1tL52pbQqfgOb/VFrrL328vyNNg/1p2VY4Q
 qzmKtxZhi/XBewQjaSQl
 =E3UQ
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "More RDMA work and some op-structure constification from Chuck Lever,
  and a small cleanup to our xdr encoding"

* tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Estimate Send Queue depth properly
  rdma core: Add rdma_rw_mr_payload()
  svcrdma: Limit RQ depth
  svcrdma: Populate tail iovec when receiving
  nfsd: Incoming xdr_bufs may have content in tail buffer
  svcrdma: Clean up svc_rdma_build_read_chunk()
  sunrpc: Const-ify struct sv_serv_ops
  nfsd: Const-ify NFSv4 encoding and decoding ops arrays
  sunrpc: Const-ify instances of struct svc_xprt_ops
  nfsd4: individual encoders no longer see error cases
  nfsd4: skip encoder in trivial error cases
  nfsd4: define ->op_release for compound ops
  nfsd4: opdesc will be useful outside nfs4proc.c
  nfsd4: move some nfsd4 op definitions to xdr4.h
2017-09-09 13:31:49 -07:00
Linus Torvalds
126e76ffbf Merge branch 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block
Pull followup block layer updates from Jens Axboe:
 "I ended up splitting the main pull request for this series into two,
  mainly because of clashes between NVMe fixes that went into 4.13 after
  the for-4.14 branches were split off. This pull request is mostly
  NVMe, but not exclusively. In detail, it contains:

   - Two pull request for NVMe changes from Christoph. Nothing new on
     the feature front, basically just fixes all over the map for the
     core bits, transport, rdma, etc.

   - Series from Bart, cleaning up various bits in the BFQ scheduler.

   - Series of bcache fixes, which has been lingering for a release or
     two. Coly sent this in, but patches from various people in this
     area.

   - Set of patches for BFQ from Paolo himself, updating both
     documentation and fixing some corner cases in performance.

   - Series from Omar, attempting to now get the 4k loop support
     correct. Our confidence level is higher this time.

   - Series from Shaohua for loop as well, improving O_DIRECT
     performance and fixing a use-after-free"

* 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits)
  bcache: initialize dirty stripes in flash_dev_run()
  loop: set physical block size to logical block size
  bcache: fix bch_hprint crash and improve output
  bcache: Update continue_at() documentation
  bcache: silence static checker warning
  bcache: fix for gc and write-back race
  bcache: increase the number of open buckets
  bcache: Correct return value for sysfs attach errors
  bcache: correct cache_dirty_target in __update_writeback_rate()
  bcache: gc does not work when triggering by manual command
  bcache: Don't reinvent the wheel but use existing llist API
  bcache: do not subtract sectors_to_gc for bypassed IO
  bcache: fix sequential large write IO bypass
  bcache: Fix leak of bdev reference
  block/loop: remove unused field
  block/loop: fix use after free
  bfq: Use icq_to_bic() consistently
  bfq: Suppress compiler warnings about comparisons
  bfq: Check kstrtoul() return value
  bfq: Declare local functions static
  ...
2017-09-09 12:49:01 -07:00
Arvind Yadav
4cb30b044a watchdog: mei_wdt: constify mei_cl_device_id
mei_cl_device_id are not supposed to change at runtime. All functions
working with mei_cl_device_id provided by <linux/mei_cl_bus.h> work
with const mei_cl_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 21:19:58 +02:00