commit 0b9fcab1b8 upstream.
Commit 01af542392 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation.
Fixes: 01af542392 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f91484f6c upstream.
Commit 65111084c6 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:
- It breaks DMA on 15xx boards - transfers just silently stall.
- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.
It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb9 ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").
So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).
Fixes: 65111084c6 ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b38e53cbfb upstream.
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a400c6fe3 upstream.
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25e531b422 upstream.
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 609865ab3d upstream.
Expands range of matched bcdDevice values for the VL817 quirk entry.
This is based on experience with Axagon EE35-GTR rev1 3.5" HDD
enclosure, which reports its bcdDevice as 0x0843, but presumably other
vendors using this IC in their products may set it to any other value.
Signed-off-by: Daniel Brát <danek.brat@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260402172433.5227-1-danek.brat@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ab833a16a upstream.
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f2 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f00 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early.
Fixes: 1325f85fa4 ("staging: usbip: bugfix add number of packets for isochronous frames")
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Link: https://patch.msgid.link/20260402085259.234-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f880aac8a5 upstream.
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver.
Fixes: 746bfe63bb ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040647-sincerity-untidy-b104@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c088d5dd2f upstream.
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path").
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040705-fruit-unloved-0701@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f993d30b9 upstream.
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM.
Fixes: 2b74b0a04d ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040753-baffle-handheld-624d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eba2936bbe ]
Commit b81ac4395b ("usb: gadget: uvc: allow for application to cleanly
shutdown") introduced two stages of synchronization waits totaling 1500ms
in uvc_function_unbind() to prevent several types of kernel panics.
However, this timing-based approach is insufficient during power
management (PM) transitions.
When the PM subsystem starts freezing user space processes, the
wait_event_interruptible_timeout() is aborted early, which allows the
unbind thread to proceed and nullify the gadget pointer
(cdev->gadget = NULL):
[ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind()
[ 814.178583][ T3173] PM: suspend entry (deep)
[ 814.192487][ T3173] Freezing user space processes
[ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release
When the PM subsystem resumes or aborts the suspend and tasks are
restarted, the V4L2 release path is executed and attempts to access the
already nullified gadget pointer, triggering a kernel panic:
[ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake
[ 814.386727][ T3173] Restarting tasks ...
[ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
[ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4
[ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94
[ 814.404078][ T4558] Call trace:
[ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4
[ 814.404083][ T4558] usb_function_deactivate+0x54/0x94
[ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c
[ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac
[ 814.404095][ T4558] v4l2_release+0xcc/0x130
Address the race condition and NULL pointer dereference by:
1. State Synchronization (flag + mutex)
Introduce a 'func_unbound' flag in struct uvc_device. This allows
uvc_function_disconnect() to safely skip accessing the nullified
cdev->gadget pointer. As suggested by Alan Stern, this flag is protected
by a new mutex (uvc->lock) to ensure proper memory ordering and prevent
instruction reordering or speculative loads. This mutex is also used to
protect 'func_connected' for consistent state management.
2. Explicit Synchronization (completion)
Use a completion to synchronize uvc_function_unbind() with the
uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by
ensuring struct uvc_device is freed after all video device resources
are released.
Fixes: b81ac4395b ("usb: gadget: uvc: allow for application to cleanly shutdown")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20260320065427.1374555-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ replaced guard()/scoped_guard() macros ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1eabb072c ]
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out.
Fixes: 2b3d942c48 ("usb ethernet gadget: split out network core")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260311-gether-disconnect-npe-v1-1-454966adf7c7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4e0a88254a ]
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260331184844.2388761-1-sigmaepsilon92@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e0e34d85c upstream.
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260401191311.3604898-1-hataegu0826@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d8c68b1fc upstream.
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection.
Fixes: 73517cf49b ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-2-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit caa27923aa upstream.
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
Fixes: 02832e56f8 ("usb: gadget: f_subset: add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-1-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f50200dd44 upstream.
When a gadget request is only partially transferred in transfer()
because the per-frame bandwidth budget is exhausted, the loop advances
to the next queued request. If that next request is a zero-length
packet (ZLP), len evaluates to zero and the code takes the
unlikely(len == 0) path, which sets is_short = 1. This bypasses the
bandwidth guard ("limit < ep->ep.maxpacket && limit < len") that
lives in the else branch and would otherwise break out of the loop for
non-zero requests. The is_short path then completes the URB before all
data from the first request has been transferred.
Reproducer (bulk IN, high speed):
Device side (FunctionFS with Linux AIO):
1. Queue a 65024-byte write via io_submit (127 * 512, i.e. a
multiple of the HS bulk max packet size).
2. Immediately queue a zero-length write (ZLP) via io_submit.
Host side:
3. Submit a 65536-byte bulk IN URB.
Expected: URB completes with actual_length = 65024.
Actual: URB completes with actual_length = 53248, losing 11776
bytes that leak into subsequent URBs.
At high speed the per-frame budget is 53248 bytes (512 * 13 * 8).
The 65024-byte request exhausts this budget after 53248 bytes, leaving
the request incomplete (req->req.actual < req->req.length). Neither
the request nor the URB is finished, and rescan is 0, so the loop
advances to the ZLP. For the ZLP, dev_len = 0, so len = min(12288, 0)
= 0, taking the unlikely(len == 0) path and setting is_short = 1.
The is_short handler then sets *status = 0, completing the URB with
only 53248 of the expected 65024 bytes.
Fix this by breaking out of the loop when the current request has
remaining data (req->req.actual < req->req.length). The request
resumes on the next timer tick, preserving correct data ordering.
Signed-off-by: Sebastian Urban <surban@surban.net>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260315151045.1155850-1-surban@surban.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ca9e46f8f upstream.
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cab ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 04145a03db ("USB: UDC: Implement udc_async_callbacks in dummy-hcd")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/c7bc93fe-4241-4d04-bd56-27c12ba35c97@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 616a63ff49 upstream.
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/68fc7c9c.050a0220.346f24.023c.GAE@google.com/
Tested-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Fixes: 7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/46135f42-fdbe-46b5-aac0-6ca70492af15@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f97e96c303 upstream.
This device has a union descriptor that is just garbage
and needs a custom descriptor.
In principle this could be done with a (conditionally
activated) heuristic. That would match more devices
without a need for defining a new quirk. However,
this always carries the risk that the heuristics
does the wrong thing and leads to more breakage.
Defining the quirk and telling it exactly what to do
is the safe and conservative approach.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260317084139.1461008-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c32f8748d7 upstream.
When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode
while software state remains INACTIVE, creating hardware/software state
inconsistency.
When switching to host mode via sysfs:
echo host > /sys/class/usb_role/13180000.usb-role-switch/role
The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,
so cdns_role_stop() skips cleanup because state is still INACTIVE.
This violates the DRD controller design specification (Figure22),
which requires returning to idle state before switching roles.
This leads to a synchronous external abort in xhci_gen_setup() when
setting up the host controller:
[ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19
[ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget
[ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed
...
[ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 1301.382485] pc : xhci_gen_setup+0xa4/0x408
[ 1301.393391] backtrace:
...
xhci_gen_setup+0xa4/0x408 <-- CRASH
xhci_plat_setup+0x44/0x58
usb_add_hcd+0x284/0x678
...
cdns_role_set+0x9c/0xbc <-- Role switch
Fix by calling cdns_drd_gadget_off() in the error path to properly
clean up the DRD gadget state.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260401001000.5761-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f6f127b9b upstream.
When the gadget endpoint is disabled or not yet configured, the ep->desc
pointer can be NULL. This leads to a NULL pointer dereference when
__cdns3_gadget_ep_queue() is called, causing a kernel crash.
Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the
standard return code for unconfigured endpoints.
This prevents potential crashes when ep_queue is called on endpoints
that are not ready.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260331000407.613298-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bb4b5ed7f upstream.
dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.
However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
- spin_unlock on a lock that is not held (undefined behavior)
- The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
causing a deadlock when spin_lock_irqsave() is called later in the
same function.
Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro.
Fixes: af076a41f8 ("usb: dwc2: also exit clock_gating when stopping udc while suspended")
Cc: stable <stable@kernel.org>
Signed-off-by: Juno Choi <juno.choi@lge.com>
Link: https://patch.msgid.link/20260324014910.2798425-1-juno.choi@lge.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 679b771ea0 upstream.
echi_brcm_wait_for_sof() gets called after disabling interrupts
in ehci_brcm_hub_control(). Use the atomic version of poll_timeout
to fix the warning.
Fixes: 9df231511b ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Cc: stable <stable@kernel.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260318185707.2588431-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01af542392 upstream.
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
Fixes: 289fcff4bc ("usb: add bus type for USB ULPI")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260401025142.1398996-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd36014ec6 upstream.
Another Silicon Motion flash drive also randomly work incorrectly
(lsusb does not list the device) on Huawei hisi platforms during
500 reboot cycles, and the DELAY_INIT quirk fixes this issue.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260319053927.264840-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b7a42ecdc upstream.
The Razer Kiyo Pro (1532:0e05) is a USB 3.0 UVC webcam whose firmware
does not handle USB Link Power Management transitions reliably. When LPM
is active, the device can enter a state where it fails to respond to
control transfers, producing EPIPE (-32) errors on UVC probe control
SET_CUR requests. In the worst case, the stalled endpoint triggers an
xHCI stop-endpoint command that times out, causing the host controller
to be declared dead and every USB device on the bus to be disconnected.
This has been reported as Ubuntu Launchpad Bug #2061177. The failure
mode is:
1. UVC probe control SET_CUR returns -32 (EPIPE)
2. xHCI host not responding to stop endpoint command
3. xHCI host controller not responding, assume dead
4. All USB devices on the affected xHCI controller disconnect
Disabling LPM prevents the firmware from entering the problematic low-
power states that precede the stall. This is the same approach used for
other webcams with similar firmware issues (e.g., Logitech HD Webcam C270).
Cc: stable <stable@kernel.org>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2061177
Signed-off-by: JP Hein <jp@jphein.com>
Link: https://patch.msgid.link/20260331003806.212565-2-jp@jphein.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e01c3416e upstream.
The Blackbox 724-746-5500 USB Director USB-RS-232 HUB, part number
IC135A, is a rebadged Edgeport/4 with its own USB device id.
Signed-off-by: Frej Drejhammar <frej@stacken.kth.se>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1be3b77de4 upstream.
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c931319 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c5 ("media: rc: iguanair: handle timeouts")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209151937.2247202-1-n7l8m4@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d6d260e9a upstream.
If a signal arrives after a read has partially completed,
we need to return the number of bytes read. -EINTR is correct
only if that number is zero.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209142048.1503791-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cbc242b88 upstream.
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called.
Fixes: f1407d5c66 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260303073344.34577-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8df672bfe3 upstream.
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers.
Fixes: afba937e54 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Closes: https://lore.kernel.org/linux-usb/CALbr=LbrUZn_cfp7CfR-7Z5wDTHF96qeuM=3fO2m-q4cDrnC4A@mail.gmail.com/
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260304130116.1721682-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1015c27a5e upstream.
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 416909962e upstream.
The synchronous message API in usbcore (usb_control_msg(),
usb_bulk_msg(), and so on) uses uninterruptible waits. However,
drivers may call these routines in the context of a user thread, which
means it ought to be possible to at least kill them.
For this reason, introduce a new usb_bulk_msg_killable() function
which behaves the same as usb_bulk_msg() except for using
wait_for_completion_killable_timeout() instead of
wait_for_completion_timeout(). The same can be done later for
usb_control_msg() later on, if it turns out to be needed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ae24cba2 upstream.
The CH343 USB/serial adapter is as buggy as it is popular (very).
One of its quirks is that despite being capable of signalling a
BREAK condition, it doesn't advertise it.
This used to work nonetheless until 66aad7d8d3 ("usb: cdc-acm:
return correct error code on unsupported break") applied some
reasonable restrictions, preventing breaks from being emitted on
devices that do not advertise CAP_BRK.
Add a quirk for this particular device, so that breaks can still
be produced on some of my machines attached to my console server.
Fixes: 66aad7d8d3 ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260301124440.1192752-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e293015ba7 upstream.
Remove the error path from the usb_phy_roothub_set_mode() function.
The code is clearly wrong, because phy_set_mode() calls can't be
balanced with phy_power_off() calls.
Additionally, the usb_phy_roothub_set_mode() function is called only
from usb_add_hcd() before it powers on the PHYs, so powering off those
makes no sense anyway.
Presumably, the code is copy-pasted from the phy_power_on() function
without adjusting the error handling.
Cc: stable@vger.kernel.org # v5.1+
Fixes: b97a313483 ("usb: core: comply to PHY framework")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260218-usb-phy-poweroff-fix-v1-1-66e6831e860e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45dba8011e upstream.
If get_1284_register() fails, the usb device reference count is
incorrect and needs to be properly dropped before returning. That will
happen when the kref is dropped in the call to destroy_priv(), so jump
to that error path instead of returning directly.
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Link: https://patch.msgid.link/2026022342-smokiness-stove-d792@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a875c0989 upstream.
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260209143720.1507500-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1c8550e70 upstream.
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.
Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().
This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.
The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.
We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime.
Fixes: 7faac1953e ("xhci: avoid race between disable slot command and host runtime suspend")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0326ff28d5 upstream.
Similar to other Huawei LTE modules using this quirk, this version with
another vid/pid suffers from spurious wakeups.
Setting the quirk fixes the issue for this device as well.
Cc: stable <stable@kernel.org>
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260306172817.2098898-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87e4b043b9 ]
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 2cf2581cd2 ("usb: cdns3: add power lost support for system resume")
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260130-usb-cdns3-fix-role-switching-during-resume-v1-1-44c456852b52@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c6526b33 ]
cdns_power_is_lost() does a register read.
Call it only once rather than twice.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20250205-s2r-cdns-v7-4-13658a271c3c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 87e4b043b9 ("usb: cdns3: fix role switching during resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52e4f2dff ]
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
