- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
-----BEGIN PGP SIGNATURE-----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=zap4
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Link ID Info field in the Reconfiguration Status Duple subfield of
the Reconfiguration Response frame only uses the lower four bits for the
link ID. The upper bits are reserved and should therefore be ignored.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325215404.ab5ccf4bc62e.I9aef8f4fb6f1b06671bb6cf0e2bd4ec6e4c8bda4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we failed on drv_start, we currently cleanup AP_VLAN reference to
bss.
But this is not needed, since AP_VLAN must be tied to a pre-existing AP
interface, so open_count cannot be 0, so we will never call drv_start
for AP_VLAN interfaces.
Remove these cleanup and return immediately instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154742.3c532a9132c3.Idac5c38d5ad7ce97782a8c05ae72bb0c689c4fa9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic that tries to reuse an existing chanctx or create a new one if
such doesn't exist will be used for other types of chanctx users.
Extract this logic from _ieee80211_link_use_channel.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154550.9a08397a7590.Id24934d14f240f8d38a23f3b1786235bac0b3e60@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, we have one set of (HT, VHT, HE) capabilities for all bands,
which means that we will need to process those capabilities without a
given sband.
To prepare for that, remove the sband argument from
ieee80211_ht_cap_ie_to_sta_ht_cap and ieee80211_he_cap_ie_to_sta_he_cap
and pass our own capabilities instead.
For ieee80211_vht_cap_ie_to_sta_vht_cap, make the sband argument
optional, since it is also used to check if there is at least one channel
that supports 80 MHz.
(Note that this check doesn't make much sense, but this can be handled in
a different patch.)
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320141504.e42ef1f0eabb.If994d6346f00219437e22043e7bf2395b827b34a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of an error in ieee80211_add_virtual_monitor,
SDATA_STATE_RUNNING should be cleared as it was set in this function.
Do it there instead of in the error path of ieee80211_do_open.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320141312.5546126313b1.I689dba2f54069b259702e8d246cedf79a73b82c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we have only one user for a channel context: the link.
With NAN, a new type of the channel context user will be added - the NAN
channel.
To prepare for this, we need to separate the channel context code from
the link code.
Removes the link argument from ieee80211_find_chanctx. Since the issue that led
to commit 5e0c422d12 ("wifi: mac80211: reserve chanctx during find") - that
added the link argument - is relevant for any user of the channel context, add
a boolean to the chanctx itself, indicating that the chanctx is in the process
of getting used.
When this indication is set, the reference count of the channel context
will be incremented by one, so even if it is getting released from a link
(or another user) it won't be freed.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101954.232499e2a41f.I0b735a607e1ec7aa5749ab01c794ef99dbe82b7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
for_each_chanctx_user_* is an iterator that visits all types of chanctx
users, including the (to be added) NAN channels, and not only the link.
ieee80211_get_chanctx_max_required_bw wasn't changed to use this new
iterator, do it now.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101556.4691916c7877.I9660f3945f4dccdb6d41a06ec4e74161e5ac65a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the deprecated[1] strncpy() with strscpy_pad() for copying the
interface name into a tracepoint entry.
The source "sdata->name" is a NUL-terminated char[IFNAMSIZ] buffer
populated via NUL-guaranteeing paths: strscpy() in ieee80211_if_add(),
snprintf() in ieee80211_add_virtual_monitor(), or memcpy() from
ndev->name in ieee80211_if_add() and netdev_notify()
(net/mac80211/iface.c). In the memcpy() cases, the source ndev->name
is itself always NUL-terminated (populated via snprintf() or strscpy()
in __dev_alloc_name() and dev_prep_valid_name() in net/core/dev.c).
The destination "local_vifs[i].vif.vif_name" is a char[IFNAMSIZ] field
in struct trace_vif_entry, stored in a __dynamic_array within the trace
ring buffer. Since ring buffer entries are not zeroed on allocation,
strscpy_pad() is used to zero-fill trailing bytes and prevent exposing
stale ring buffer contents to userspace readers of tracefs.
No behavioral change: since interface names are always at most 15
characters plus a NUL terminator, strscpy_pad() with size IFNAMSIZ (16)
produces identical output to the original strncpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260323172015.work.146-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_sta_free_link() only frees the link and doesn't
unhash it, so it can't be used here. Instead this needs
to use ieee80211_sta_remove_link(), which unhashes it. An
argument against it was that it also calls the driver and
that already happened, but calls to the driver removing a
link that's already removed are suppressed, so that's not
actually an issue. Use it to fix the hashtable.
Reported-and-tested-by: Jouni Malinen <j@w1.fi>
Fixes: 84674b03d8 ("wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260318180622.9240067117e9.I45fb2b7f04d75e48d2f3e9c6650ef9f54a314f5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent.
Fixes: 2e3c873682 ("mac80211: support functions for mesh")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260318034244.2595020-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_chandef_create() is called universally to create the
default chandef during hw registration, however it only really
makes sense to be used for 2GHz, 5GHz, and 6GHz (and by extension
the 'LC' band) as it relies on the channel type which is only
relevant to those specific bands.
To reduce some confusion, create a generic helper for creating the
default chandef that makes sense for all supported bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For NPCA, we need to treat the channel request differently
for AP and other interfaces (APs can share NPCA, under the
assumption that userspace will set them up with the same
BSS color.) This is difficult if we have to check against
a chanreq made up from the chanctx, but this isn't a code
path that needs to be highly optimised, so just always use
the (originally) recheck functionality to check against
all users of the chanctx.
Link: https://patch.msgid.link/20260303152641.1a3ff6ead82b.I486f1a94b9a32e0b045815cbbb22679c8cef56e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need to duplicate the macros, just make a generic
one that gets the name prefix to be used, and use that to
create the others. While at it, add the puncturing bitmap
to the trace and simplify the ternary expressions.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303152641.ca32d70055f8.I8138a31ceb75715d928d807554288baccc33cd8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in strict mode, validate that the HE 6 GHz operation is
valid even when EHT operation is used instead. This checks
that APs are advertising correct information for HE clients,
without testing with such clients.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150832.74b934163b99.If4d1db3f39c37900cf0d0f4669cd5f8b677daaa0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Inactive times of around 0xffffffff milliseconds have been observed on
an ath9k device on ARM. This is likely due to a memory ordering race in
the jiffies_to_msecs(jiffies - last_active()) calculation causing an
overflow when the observed jiffies is below ieee80211_sta_last_active().
Use jiffies_delta_to_msecs() instead to avoid this problem.
Fixes: 7bbdd2d987 ("mac80211: implement station stats retrieval")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260303161701.31808-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't remove keys before disable beaconing, at least when
beacon protection is used, since that would remove keys that are
still used for beacon transmission at the same time. Stop before
removing keys so there's no race.
Fixes: af2d14b01c ("mac80211: Beacon protection using the new BIGTK (STA)")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150339.574e7887b3ab.I50d708f5aa22584506a91d0da7f8a73ba39fceac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The action code actually serves to identify the type of action
frame, so it really isn't part of the per-type structure. Pull
it out and have it in the general action frame format.
In theory, whether or not the action code is present in this
way is up to each category, but all categories that are defined
right now all have that value.
While at it, and since this change requires changing all users,
remove the 'u' and make it an anonymous union in this case, so
that all code using this changes.
Change IEEE80211_MIN_ACTION_SIZE to take an argument which says
how much of the frame is needed, e.g. category, action_code or
the specific frame type that's defined in the union. Again this
also ensures that all code is updated.
In some cases, fix bugs where the SKB length was checked after
having accessed beyond the checked length, in particular in FTM
code, e.g. ieee80211_is_ftm().
Link: https://patch.msgid.link/20260226183607.67e71846b59e.I9a24328e3ffcaae179466a935f1c3345029f9961@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The missing initialization causes driver to misinterpret the EML control bitmap,
resulting in incorrect link bitmap handling.
Fixes: 0d95280a2d ("wifi: mac80211: Add eMLSR/eMLMR action frame parsing support")
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303054725.471548-1-MeiChia.Chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently key installation is only supported for netdev. For NAN,
support most key operations (except setting default data key) on
wdevs instead of netdevs, and adjust all the APIs and tracing to
match.
Since nothing currently sets NL80211_EXT_FEATURE_SECURE_NAN, this
doesn't change anything (P2P Device already isn't allowed.)
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107150057.69a0cfad95fa.I00efdf3b2c11efab82ef6ece9f393382bcf33ba8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_nan_conf::cluster_id is currently a pointer, but there is no real
reason to not have it an array. It makes things easier as there is no
need to check the pointer validity each time.
If a cluster ID wasn't provided by user space it will be randomized.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260302091108.2b12e4ccf5bb.Ib16bf5cca55463d4c89e18099cf1dfe4de95d405@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function ieee80211_start_scan() was refactored and replaced by
__ieee80211_start_scan() in commit f3b85252f0 ("mac80211: fix scan
races and rework scanning"). Update the comment in
ieee80211_tx_h_check_assoc() accordingly.
Additionally, remove the broken gmane.org link in the comment.
Suggested-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260228061944.887-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise support for IEEE 802.1X authentication protocol directly from
mac80211, without depending on driver indication of (Re)Association
frame encryption capability.
As specified in "IEEE P802.11bi/D4.0, clauses 12.16.5 and 12.16.8.2",
IEEE 802.1X authentication can operate with or without (Re)Association
frame encryption support. Therefore, mac80211 can safely advertise
802.1X support independently of driver capabilities.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-6-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the IEEE 802.1X authentication protocol in non-AP STA
mode, as specified in "IEEE P802.11bi/D4.0, 12.16.5".
IEEE 802.1X authentication involves multiple Authentication frame
exchanges, with the non-AP STA and AP alternating transaction
sequence numbers. The number of Authentication frame exchanges
depends on the EAP method in use. For IEEE 802.1X authentication,
process only Authentication frames with the expected transaction
sequence number.
For IEEE 802.1X Authentication, Table 9-71 specifies that the
Encapsulation Length field as specified in Clause 9.4.1.82 shall be
present in all IEEE 802.1X Authentication frames. Drop the frame in
the mac80211 if the Encapsulation Length field is missing.
After receiving the final Authentication frame with status code
WLAN_STATUS_8021X_AUTH_SUCCESS from the AP, mac80211 marks the state
as authenticated, as it indicates the EAP handshake has completed
successfully over the Authentication frames as specified in
Clause 12.16.5.
In the PMKSA caching case, only two Authentication frames are
exchanged if the AP identifies a valid PMKSA, then as specified
in Clause 12.16.8.3, the AP shall set the Status Code to
WLAN_STATUS_SUCCESS in the final Authentication frame and must not
include an encapsulated EAPOL PDU. This frame will be the final
Authentication frame from the AP when PMKSA caching is enabled,
and mac80211 marks the state as authenticated.
In case of authentication success or failure, forward the
Authentication frame to userspace(e.g. wpa_supplicant), and let
userspace validate the Authentication frame from the AP as per the
specification.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-5-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per IEEE Std 802.11be-2024, 12.5.2.3.3, if the MPDU is an
individually addressed Data frame between an AP MLD and a
non-AP MLD associated with the AP MLD, then A1/A2/A3
will be MLD MAC addresses. Otherwise, Al/A2/A3 will be
over-the-air link MAC addresses.
Currently, during AAD and Nonce computation for software based
encryption/decryption cases, mac80211 directly uses the addresses it
receives in the skb frame header. However, after the first
authentication, management frame addresses for non-AP MLD stations
are translated to MLD addresses from over the air link addresses in
software. This means that the skb header could contain translated MLD
addresses, which when used as is, can lead to incorrect AAD/Nonce
computation.
In the following manner, ensure that the right set of addresses are used:
In the receive path, stash the pre-translated link addresses in
ieee80211_rx_data and use them for the AAD/Nonce computations
when required.
In the transmit path, offload the encryption for a CCMP/GCMP key
to the hwsim driver that can then ensure that encryption and hence
the AAD/Nonce computations are performed on the frame containing the
right set of addresses, i.e, MLD addresses if unicast data frame and
link addresses otherwise.
To do so, register the set key handler in hwsim driver so mac80211 is
aware that it is the driver that would take care of encrypting the
frame. Offload encryption for a CCMP/GCMP key, while keeping the
encryption for WEP/TKIP and MMIE generation for a AES_CMAC or a
AES_GMAC key still at the SW crypto in mac layer
Co-developed-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Sai Pratyusha Magam <sai.magam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226042959.3766157-1-sai.magam@oss.qualcomm.com
[only store and apply link_addrs for unicast non-data
rather storing always and applying for !unicast_data]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the unsolicited probe response template is always fetched from
the default link of a virtual interface in both Multi-Link Operation (MLO)
and non-MLO cases. However, in the MLO case there is a need to fetch the
unsolicited probe response template from a specific link instead of the
default link.
Hence, add support for fetching the unsolicited probe response template
based on the link ID from the corresponding link data.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-fils-prob-by-link-v1-2-a2746a853f75@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the FILS discovery template is always fetched from the default
link of a virtual interface in both Multi-Link Operation (MLO) and
non-MLO cases. However, in the MLO case there is a need to fetch the FILS
discovery template from a specific link instead of the default link.
Hence, add support for fetching the FILS discovery template based on the
link ID from the corresponding link data.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-fils-prob-by-link-v1-1-a2746a853f75@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, a station can only be added to a netdev interface,
mainly because there was no need for a station of a non-netdev
interface.
But for NAN, we will have stations that belong to the NL80211_IFTYPE_NAN
interface.
Prepare for adding/changing/deleting a station that belongs to a non-netdev
interface. This doesn't actually allow such stations - this will be done
in a different patch.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.65c9cc96f814.Ic02066b88bb8ad6b21e15cbea8d720280008c83b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, for AP MLD, the link ID is not provided when a NULL
packet is triggered to probe a station. For non-MLO stations connected
to an AP MLD, use the station's default link to send the NULL packets
and set addr2 and addr3 to the link address. For MLO stations, set the
link ID to unspecified to let the driver select the appropriate link.
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Signed-off-by: Suraj P Kizhakkethil <suraj.kizhakkethil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213100126.1414398-3-suraj.kizhakkethil@oss.qualcomm.com
[init link_id in each branch instead of default to zero]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when sending a NULL frame to probe a station, the band
information is derived from the chanctx_conf in the mac80211 vif's
bss_conf. However, for AP MLD, chanctx_conf is not assigned to the
vif's bss_conf; instead it is assigned on a per-link basis. As a result,
for AP MLD, sending a NULL packet to probe will trigger a warning.
WARNING: net/mac80211/cfg.c:4635 at ieee80211_probe_client+0x1a8/0x1d8 [mac80211], CPU#2: hostapd/244
Call trace:
ieee80211_probe_client+0x1a8/0x1d8 [mac80211] (P)
nl80211_probe_client+0xac/0x170 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
genl_rcv_msg+0x200/0x280
netlink_rcv_skb+0x38/0xf0
genl_rcv+0x34/0x48
netlink_unicast+0x314/0x3a0
netlink_sendmsg+0x150/0x390
____sys_sendmsg+0x1f4/0x21c
___sys_sendmsg+0x98/0xc0
__sys_sendmsg+0x74/0xcc
__arm64_sys_sendmsg+0x20/0x34
invoke_syscall.constprop.0+0x4c/0xd0
do_el0_svc+0x3c/0xd0
el0_svc+0x28/0xc0
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
---[ end trace 0000000000000000 ]---
For NULL packets sent to probe stations, set the band information only
for non-MLD, since MLD transmissions does not rely on band.
Signed-off-by: Suraj P Kizhakkethil <suraj.kizhakkethil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213100126.1414398-2-suraj.kizhakkethil@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>