[ Upstream commit 3db63daabe ]
NFSv3 includes pre/post wcc attributes which allow the client to
determine if all changes to the file have been made by the client
itself, or if any might have been made by some other client.
If there are gaps in the pre/post ctime sequence it must be assumed that
some other client changed the file in that gap and the local cache must
be suspect. The next time the file is opened the cache should be
invalidated.
Since Commit 1c341b7775 ("NFS: Add deferred cache invalidation for
close-to-open consistency violations") in linux 5.3 the Linux client has
been triggering this invalidation. The chunk in nfs_update_inode() in
particularly triggers.
Unfortunately Linux NFS assumes that all replies will be processed in
the order sent, and will arrive in the order processed. This is not
true in general. Consequently Linux NFS might ignore the wcc info in a
WRITE reply because the reply is in response to a WRITE that was sent
before some other request for which a reply has already been seen. This
is detected by Linux using the gencount tests in nfs_inode_attr_cmp().
Also, when the gencount tests pass it is still possible that the request
were processed on the server in a different order, and a gap seen in
the ctime sequence might be filled in by a subsequent reply, so gaps
should not immediately trigger delayed invalidation.
The net result is that writing to a server and then reading the file
back can result in going to the server for the read rather than serving
it from cache - all because a couple of replies arrived out-of-order.
This is a performance regression over kernels before 5.3, though the
change in 5.3 is a correctness improvement.
This has been seen with Linux writing to a Netapp server which
occasionally re-orders requests. In testing the majority of requests
were in-order, but a few (maybe 2 or three at a time) could be
re-ordered.
This patch addresses the problem by recording any gaps seen in the
pre/post ctime sequence and not triggering invalidation until either
there are too many gaps to fit in the table, or until there are no more
active writes and the remaining gaps cannot be resolved.
We allocate a table of 16 gaps on demand. If the allocation fails we
revert to current behaviour which is of little cost as we are unlikely
to be able to cache the writes anyway.
In the table we store "start->end" pair when iversion is updated and
"end<-start" pairs pre/post pairs reported by the server. Usually these
exactly cancel out and so nothing is stored. When there are
out-of-order replies we do store gaps and these will eventually be
cancelled against later replies when this client is the only writer.
If the final write is out-of-order there may be one gap remaining when
the file is closed. This will be noticed and if there is precisely on
gap and if the iversion can be advanced to match it, then we do so.
This patch makes no attempt to handle directories correctly. The same
problem potentially exists in the out-of-order replies to create/unlink
requests can cause future lookup requires to be sent to the server
unnecessarily. A similar scheme using the same primitives could be used
to notice and handle out-of-order replies.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 867da60d46 ("nfs: avoid i_lock contention in nfs_clear_invalid_mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e0f75302 ]
Currently, trace point mm_page_alloc_zone_locked() doesn't show correct
information.
First, when alloc_flag has ALLOC_HARDER/ALLOC_CMA, page can be allocated
from MIGRATE_HIGHATOMIC/MIGRATE_CMA. Nevertheless, tracepoint use
requested migration type not MIGRATE_HIGHATOMIC and MIGRATE_CMA.
Second, after commit 44042b4498 ("mm/page_alloc: allow high-order pages
to be stored on the per-cpu lists") percpu-list can store high order
pages. But trace point determine whether it is a refiil of percpu-list by
comparing requested order and 0.
To handle these problems, make mm_page_alloc_zone_locked() only be called
by __rmqueue_smallest with correct migration type. With a new argument
called percpu_refill, it can show roughly whether it is a refill of
percpu-list.
Link: https://lkml.kernel.org/r/20220512025307.57924-1-vvghjk1234@gmail.com
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: <linuxgeek@linuxgeek.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 281dd25c1a ("mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c10941e34 ]
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
Fixes: 60949b7b80 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20241028125657.1271512-1-pierre.gondois@arm.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad4a3ca6a8 ]
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
dev_get_by_index_rcu+0x1d3/0x210
l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
ip_tunnel_bind_dev+0x72f/0xa00
ip_tunnel_newlink+0x368/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: db53cd3d88 ("net: Handle l3mdev in ip_tunnel_init_flow")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241022063822.462057-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d352ccf1e ]
Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.
Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.
This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware
In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.
The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.
Tested on ath10k using WCN3990, QCA6174
Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 07a6e3b78a ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b846972103 ]
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05a ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0db885fb0 ]
USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 705e3ce37b ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09d88791c7 ]
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6
Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1442ee0011 upstream.
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d7b2ce43d upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db53cd3d88 upstream.
Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dae9f1187 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f8 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d51705614f ]
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d9 ("mctp: Add device handling and netlink interface")
Fixes: 831119f887 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07cc7b0b94 ]
Before commit addf9b90de ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: d51705614f ("mctp: Handle error of rtnl_register_module().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12dc5c2cb7 ]
Add rtnl kind names instead of using raw values. We'll need to
check for DEL kind later to validate bulk flag support.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d51705614f ("mctp: Handle error of rtnl_register_module().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40867d74c3 ]
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05ef7055de ("netfilter: fib: check correct rtable in vrf setups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9246b487ab ]
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d3cefaf65 ]
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec35 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73febd775b ]
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf65 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a263a84088 ]
Change of_*() functions to device_*() for firmware agnostic usage.
This allows to have the smbus_alert interrupt without any changes
in the controller drivers using the ACPI table.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf65 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca0acb511c ]
Add fwnode_irq_get_byname() to get an interrupt by name from either
ACPI table or Device Tree, whichever is used for enumeration.
In the ACPI case, this allow us to use 'interrupt-names' in
_DSD which can be mapped to Interrupt() resource by index.
The implementation is similar to 'interrupt-names' in the
Device Tree.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf65 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eca6e2d4a4 ]
This patch introduces a new helper routine - fwnode_iomap(), which
allows to map the memory mapped IO for a given device node.
This implementation does not cover the ACPI case and may be expanded
in the future. The main purpose here is to be able to develop resource
provider agnostic drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20211203212358.31444-2-anand.ashok.dumbre@xilinx.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8d3cefaf65 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 678379e1d4 upstream.
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 599f689905 upstream.
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ("[media] cec: move the CEC framework out of staging and to media")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit ff53cd52d9.
The "integrity" kobject only acted as a holder for static sysfs entries.
It also was embedded into struct gendisk without managing it, violating
assumptions of the driver core.
Instead register the sysfs entries directly onto the struct device.
Also drop the now unused member integrity_kobj from struct gendisk.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[cascardo: conflict because of constification of integrity_ktype]
[cascardo: struct gendisk is defined at include/linux/genhd.h]
[cascardo: there is no blk_trace_attr_group]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53369581dc ]
We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print. This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.
v5:
- Better commit message (Jonathan)
- Add kerenl doc with examples (Jani)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04e906839a upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e68470f4e ]
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Stable-dep-of: 02e9e9366f ("vhost_vdpa: assign irq bypass producer token correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf8c0b9ae ]
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7af ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7af ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 564d73c4d9 ]
Add i2c_get_match_data() to get match data for I2C, ACPI and
DT-based matching, so that we can optimize the driver code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
[wsa: simplified var initialization]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 119abf7d18 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6ae073f59 ]
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70 ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: c471236b23 ("bareudp: Pull inner IP header on xmit.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 435fe1c0c1 ]
This patch adds support for encapsulating IPv4/IPv6 within GENEVE.
In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs
to be provided at device creation. This property cannot be changed for
the time being.
In case IP traffic is received on a non-tun device the drop count is
increased.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c471236b23 ("bareudp: Pull inner IP header on xmit.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b80 ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c42fa24b44 ]
If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.
Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 60949b7b80 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a128b054ce ]
Commit f8b92ba67c ("mount: Add mount warning for impending timestamp
expiry") introduced a mount warning regarding filesystem timestamp
limits, that is printed upon each writable mount or remount.
This can result in a lot of unnecessary messages in the kernel log in
setups where filesystems are being frequently remounted (or mounted
multiple times).
Avoid this by setting a superblock flag which indicates that the warning
has been emitted at least once for any particular mount, as suggested in
[1].
Link: https://lore.kernel.org/CAHk-=wim6VGnxQmjfK_tDg6fbHYKL4EFkmnTjVr9QnRqjDBAeA@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220119202934.26495-1-ailiop@suse.com
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 4bcda1eaf1 ("mount: handle OOM on mnt_warn_timestamp_expiry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b3ea0926a ]
Add a new SB_I_ flag to mark superblocks that have an ephemeral bdi
associated with them, and unregister it when the superblock is shut
down.
Link: https://lkml.kernel.org/r/20211021124441.668816-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 4bcda1eaf1 ("mount: handle OOM on mnt_warn_timestamp_expiry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7fb0423c2 upstream.
Commit d23b5c5777 ("cgroup: Make operations on the cgroup root_list RCU
safe") adds a new rcu_head to the cgroup_root structure and kvfree_rcu()
for freeing the cgroup_root.
The current implementation of kvfree_rcu(), however, has the limitation
that the offset of the rcu_head structure within the larger data
structure must be less than 4096 or the compilation will fail. See the
macro definition of __is_kvfree_rcu_offset() in include/linux/rcupdate.h
for more information.
By putting rcu_head below the large cgroup structure, any change to the
cgroup structure that makes it larger run the risk of causing build
failure under certain configurations. Commit 77070eeb88 ("cgroup:
Avoid false cacheline sharing of read mostly rstat_cpu") happens to be
the last straw that breaks it. Fix this problem by moving the rcu_head
structure up before the cgroup structure.
Fixes: d23b5c5777 ("cgroup: Make operations on the cgroup root_list RCU safe")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20231207143806.114e0a74@canb.auug.org.au/
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18685451fc upstream.
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449 ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b359cf6d upstream.
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal.
Fixes: 2b84e215f8 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d23b5c5777 ]
At present, when we perform operations on the cgroup root_list, we must
hold the cgroup_mutex, which is a relatively heavyweight lock. In reality,
we can make operations on this list RCU-safe, eliminating the need to hold
the cgroup_mutex during traversal. Modifications to the list only occur in
the cgroup root setup and destroy paths, which should be infrequent in a
production environment. In contrast, traversal may occur frequently.
Therefore, making it RCU-safe would be beneficial.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 452ef7f860 ]
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
NeilBrown
Wonhyuk Yang
Pierre Gondois
Ido Schimmel
Youghandhar Chintala
Eyal Birger
Elson Roy Serrao
Eric Dumazet
Toke Høiland-Jørgensen
Marc Zyngier
Wei Fang
David Ahern
Anastasia Kovaleva
Kuniyuki Iwashima
Nikolay Aleksandrov
Yanjun Zhang
WangYuli
Satya Priya Kakitapalli
Manivannan Sadhasivam
Heiner Kallweit
Wolfram Sang
Akhil R
Anand Ashok Dumbre
Al Viro
Hans Verkuil
Thomas Weißschuh
Matthew Brost
Phil Sutter
Oliver Neukum
Josh Hunt
Xie Yongji
Chao Yu
Biju Das
Gal Pressman
Clément Léger
Rafael J. Wysocki
Anthony Iliopoulos
Christoph Hellwig
Waiman Long
Florian Westphal
Pablo Neira Ayuso
Yafang Shao
Carolina Jubran