mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-13 07:31:07 +00:00
1,233,462 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
3938eb956e |
drm/amdgpu: add a retry for IP discovery init
AMD dGPUs have integrated FW that runs as soon as the device gets power and initializes the board (determines the amount of memory, provides configuration details to the driver, etc.). For direct PCIe attached cards this happens as soon as power is applied and normally completes well before the OS has even started loading. However, with hotpluggable ports like USB4, the driver needs to wait for this to complete before initializing the device. This normally takes 60-100ms, but could take longer on some older boards periodically due to memory training. Retry for up to a second. In the non-hotplug case, there should be no change in behavior and this should complete on the first try. v2: adjust test criteria v3: adjust checks for the masks, only enable on removable devices v4: skip bif_fb_en check Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
|
|
886b92f635 |
drm/amdgpu: ungate power gating when system suspend
[Why] During suspend, if GFX DPM is enabled and GFXOFF feature is enabled the system may get hung. So, it is suggested to disable GFXOFF feature during suspend and enable it after resume. [How] Update the code to disable GFXOFF feature during suspend and enable it after resume. [ 311.396526] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 311.396530] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 311.396531] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 Acked-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Kun Liu <kun.liu2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
|
|
3a50f41bc2 |
drm/radeon: replace 1-element arrays with flexible-array members
Reported by coccinelle, the following patch will move the following 1 element arrays to flexible arrays. drivers/gpu/drm/radeon/atombios.h:5523:32-48: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5545:32-48: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5461:34-44: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4447:30-40: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4236:30-41: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7095:28-45: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:3896:27-37: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5443:16-25: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5454:34-43: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4603:21-32: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4628:32-46: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:6285:29-39: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4296:30-36: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4756:28-36: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4064:22-35: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7327:9-24: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7332:32-53: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7362:26-41: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7369:29-44: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7349:24-32: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7355:27-35: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
49afe91370 |
drm/amd: Fix UBSAN array-index-out-of-bounds for Powerplay headers
For pptable structs that use flexible array sizes, use flexible arrays. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039926 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
7b1c6263ea |
drm/amdgpu: don't use pci_is_thunderbolt_attached()
It's only valid on Intel systems with the Intel VSEC. Use dev_is_removable() instead. This should do the right thing regardless of the platform. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
|
|
432e664e7c |
drm/amdgpu: don't use ATRM for external devices
The ATRM ACPI method is for fetching the dGPU vbios rom
image on laptops and all-in-one systems. It should not be
used for external add in cards. If the dGPU is thunderbolt
connected, don't try ATRM.
v2: pci_is_thunderbolt_attached only works for Intel. Use
pdev->external_facing instead.
v3: dev_is_removable() seems to be what we want
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
||
|
|
b3c942bb6c |
drm/amdgpu/gfx10,11: use memcpy_to/fromio for MQDs
Since they were moved to VRAM, we need to use the IO
variants of memcpy.
Fixes:
|
||
|
|
f7aeee7346 |
drm/amdgpu: use mode-2 reset for RAS poison consumption
Switch from mode-1 reset to mode-2 for poison consumption. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
b77cc85bdb |
drm/amdgpu doorbell range should be set when gpu recovery
GFX doorbell range should be set after flr otherwise the gfx doorbell range will be overlap with MEC. v2: remove "amdgpu_sriov_vf" and "amdgpu_in_reset" check, and add grbm select for the case of 2 gfx rings. Signed-off-by: Lin.Cao <lincao12@amd.com> Acked-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
42ef313754 |
drm/amd/pm: Return 0 as default min power limit for legacy asics
Return 0 as the default min power limit for the asics use powerplay. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
0df96fb71a |
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
The new read multishot method doesn't need to allocate async data ever,
as it doesn't do vectored IO and it must only be used with provided
buffers. While it doesn't have ->prep_async() set, it also sets
->async_size to 0, which is different from any other read/write type we
otherwise support.
If it's used on a file type that isn't pollable, we do try and allocate
this async data, and then try and use that data. But since we passed in
a size of 0 for the data, we get a NULL back on data allocation. We then
proceed to dereference that to copy state, and that obviously won't end
well.
Add a check in io_setup_async_rw() for this condition, and avoid copying
state. Also add a check for whether or not buffer selection is specified
in prep while at it.
Fixes:
|
||
|
|
d1f6be54ea |
ARM cpufreq updates for 6.7
- Add support for several Qualcomm SoC versions (Robert Marko and Varadarajan Narayanan). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmVDNtYACgkQ0rkcPK6B Ehwhuw//UKjJ+nRaAZsotW1in3bU8vRS4L/iLdLndxBTRhkB2Boki80ICYIxGaXB HU6+Trkw2SL+iWxYY2c/+xdNe5ZiNPZ/GIguPpPz6O+Pgv/krj25crdgAioiAxWc m0do2cMo0iyRGCEJvcrO+3EYDwN7RtwkEPfMT4B1OuJLgNXQQIBREuvJmslqsoqa dA4eNcg9d4bQt2wW0C2Zv3mh9/RMCVnA0s6dRN0WQg07Cdz5lr6J423y64VBrcIV nXhOwbj4gqDHsOIUJuezBW76CP5leDQ53hls/4a0Ct4Y5RCuC0VWJScrOE0B7ib4 AHsaS0wz6Viu6FNpKLLT9sbi8zGcaYe35pgfkuyU1vUVX98a0vmtYK5KVRL6+sNO eUG3D3FTTyU4iBE9xecdW+Sy9xyUUdbVJBNVUoqK1Od3pw0VJ5sZngQvbD0YmcHS l5ggi076R+S1yuc7H54qQChXo6eSngju61dnvW2qVg+YOiYPkpezQZbM526R50vI z7Lx7VgyMgPCpJazl8foc6E+Mmgegcb6wJd0nEq11/KyQCTov5ky2pBcJMkeuctY lyp2qB/AtS14snZs7Im6EYWR+UdGJThjRAUHhxgwssxYGuKnQfccc3bVqw+feeHg rjyJ3LUuvXoIwbTWacff51u/+Wsa/ghx+byeNvyx0lobkoKA+Us= =yM+b -----END PGP SIGNATURE----- Merge tag 'cpufreq-arm-updates-6.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.7 (part 2) from Viresh kumar: "- Add support for several Qualcomm SoC versions (Robert Marko and Varadarajan Narayanan)." * tag 'cpufreq-arm-updates-6.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx cpufreq: qcom-nvmem: add support for IPQ8074 soc: qcom: socinfo: Add IDs for IPQ8174 family dt-bindings: arm: qcom,ids: Add IDs for IPQ8174 family dt-bindings: qcom: geni-se: Allow dma-coherent soc: qcom: socinfo: Add SoC ID for QCM6490 dt-bindings: arm: qcom,ids: Add SoC ID for QCM6490 soc: qcom: socinfo: Add SM8550-adjacent PMICs soc: qcom: wcnss_ctrl: Remove redundant initialization owner in wcnss_ctrl_driver soc: qcom: socinfo: Add Soc ID for SM7150P dt-bindings: arm: qcom,ids: Add Soc ID for SM7150P firmware: Add support for Qualcomm UEFI Secure Application firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface lib/ucs2_string: Add UCS-2 strscpy function |
||
|
|
a563c99f22 |
linux-cpupower-6.7-rc1
This cpupower update for Linux 6.7-rc1 consists of a single fix to documentation to fix reference to a removed document. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmVBZZcACgkQCwJExA0N QxxB9w/+KfLlAOCThW9LZauqVsVJHzzMuDi6ctuvnUsy39Xf/VH22SzakhYoujfT vuQ43cLqIT/p9HkjbQnC0uJTx3nIIs/qWRWyklMn9ETAp+TP14ewTFRYAiPL/XRh GylTbCzh2QmU0oiR81Cq4bMRGkzywGHKi7g+E5LQ7ACz1McreWHIXonPokLEGO7n 61Z1M9Q43333IZSAE+erop5CVJTOsFTf3Ox2RLroNg9MNFX1OiUuBrpSsG2O44BX 59A0vQxIRuDqDgBDZapb0lpjj/E4pdyuKbBSZVDDKXbe9vWdhomibwMISiM9vjNm z8zy2lUA+qUE2UDSZFVFVDKk8hPwgSvcZfKhFUuuc3K+vXixNfxhFg7TVdH5RwkV pNgcXMuQjqPXz4k59MWS0E68aWPsvfsA3Xt/GD3yr4aSDskrzIiyc6F0u67mW1qG T1sQdzg2AHKXb7g774T2OW6ugeoEZ5LftDDZxTZx0+UIGk7JysXb9ksNJTqItnCI j4MSOK25EbHR/pk0cJAlCfn6kGYYOMzuTiOf+xEz4FvYHeduEAvUbT5irBMGkETI W4hwsv/fUPOhVMc4uYEZCIf6vcdLPDs9REvB55VGQm4O3CNM+ETBeRwnDHD8QaWg qPM8+vnrUjiE33YVPF0F/QhkJxSo+SZP79igwzpBva5ttkUuOpg= =p8rZ -----END PGP SIGNATURE----- Merge tag 'linux-cpupower-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Merge cpupower utility update for 6.7-rc1 from Shuah Khan: "This cpupower update for Linux 6.7-rc1 consists of a single fix to documentation to fix reference to a removed document." * tag 'linux-cpupower-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: fix reference to nonexistent document |
||
|
|
1373ca10ec |
exfat: fix ctime is not updated
Commit |
||
|
|
fc12a722e6 |
exfat: fix setting uninitialized time to ctime/atime
An uninitialized time is set to ctime/atime in __exfat_write_inode().
It causes xfstests generic/003 and generic/192 to fail.
And since there will be a time gap between setting ctime/atime to
the inode and writing back the inode, so ctime/atime should not be
set again when writing back the inode.
Fixes:
|
||
|
|
004fc58ede |
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
Property 'playback-codecs' is referenced as 'speaker-codec' in the error
message, and this can lead to confusion.
Correct the error message such that the correct property name is
referenced.
Fixes:
|
||
|
|
016b9332a3 |
netlink: fill in missing MODULE_DESCRIPTION()
W=1 builds now warn if a module is built without a MODULE_DESCRIPTION(). Fill it in for sock_diag. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
02f0717e98 |
net/tcp: fix possible out-of-bounds reads in tcp_hash_fail()
syzbot managed to trigger a fault by sending TCP packets
with all flags being set.
v2:
- While fixing this bug, add PSH flag handling and represent
flags the way tcpdump does : [S], [S.], [P.]
- Print 4-tuples more consistently between families.
BUG: KASAN: stack-out-of-bounds in string_nocheck lib/vsprintf.c:645 [inline]
BUG: KASAN: stack-out-of-bounds in string+0x394/0x3d0 lib/vsprintf.c:727
Read of size 1 at addr ffffc9000397f3f5 by task syz-executor299/5039
CPU: 1 PID: 5039 Comm: syz-executor299 Not tainted 6.6.0-rc7-syzkaller-02075-g55c900477f5b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
string_nocheck lib/vsprintf.c:645 [inline]
string+0x394/0x3d0 lib/vsprintf.c:727
vsnprintf+0xc5f/0x1870 lib/vsprintf.c:2818
vprintk_store+0x3a0/0xb80 kernel/printk/printk.c:2191
vprintk_emit+0x14c/0x5f0 kernel/printk/printk.c:2288
vprintk+0x7b/0x90 kernel/printk/printk_safe.c:45
_printk+0xc8/0x100 kernel/printk/printk.c:2332
tcp_inbound_hash.constprop.0+0xdb2/0x10d0 include/net/tcp.h:2760
tcp_v6_rcv+0x2b31/0x34d0 net/ipv6/tcp_ipv6.c:1882
ip6_protocol_deliver_rcu+0x33b/0x13d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0x14f/0x2f0 net/ipv6/ip6_input.c:483
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0xce/0x440 net/ipv6/ip6_input.c:492
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ipv6_rcv+0x563/0x720 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x133/0x700 net/core/dev.c:5786
tun_rx_batched+0x429/0x780 drivers/net/tun.c:1579
tun_get_user+0x29e7/0x3bc0 drivers/net/tun.c:2002
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:1956 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
|
||
|
|
153a58c6d8 |
net: ethernet: ti: am65-cpsw: rx_pause/tx_pause controls wrong direction
The rx_pause flag says that whether we support receiving Pause frames. When a Pause frame is received TX is delayed for some time. This is TX flow control. In the same manner tx_pause is actually RX flow control. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
421b605edb |
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
This reverts commit |
||
|
|
b44f9da817 |
mmc: vub300: fix an error code
This error path should return -EINVAL instead of success.
Fixes:
|
||
|
|
ed9009ad30 |
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache operation be allowed only after a write has occurred. Otherwise, the cache flush command or subsequent commands will time out. Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Rafael Beims <rafael.beims@toradex.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
|
40592064a1 |
pwm: samsung: Document new member .channel in struct samsung_pwm_chip
My earlier commit reworking how driver data is tracked added a new
member to struct samsung_pwm_chip but failed to add matching
documentation. Make up leeway.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310130404.uQ33q5Dk-lkp@intel.com/
Fixes:
|
||
|
|
71956d0cb5 |
mmc: sdhci_am654: fix start loop index for TAP value parsing
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.
Fixes:
|
||
|
|
cdbab62366 |
tcp: fix fastopen code vs usec TS
After blamed commit, TFO client-ack-dropped-then-recovery-ms-timestamps
packetdrill test failed.
David Morley and Neal Cardwell started investigating and Neal pointed
that we had :
tcp_conn_request()
tcp_try_fastopen()
-> tcp_fastopen_create_child
-> child = inet_csk(sk)->icsk_af_ops->syn_recv_sock()
-> tcp_create_openreq_child()
-> copy req_usec_ts from req:
newtp->tcp_usec_ts = treq->req_usec_ts;
// now the new TFO server socket always does usec TS, no matter
// what the route options are...
send_synack()
-> tcp_make_synack()
// disable tcp_rsk(req)->req_usec_ts if route option is not present:
if (tcp_rsk(req)->req_usec_ts < 0)
tcp_rsk(req)->req_usec_ts = dst_tcp_usec_ts(dst);
tcp_conn_request() has the initial dst, we can initialize
tcp_rsk(req)->req_usec_ts there instead of later in send_synack();
This means tcp_rsk(req)->req_usec_ts can be a boolean.
Many thanks to David an Neal for their help.
Fixes:
|
||
|
|
63e201916b |
selftests: pmtu.sh: fix result checking
In the PMTU test, when all previous tests are skipped and the new test
passes, the exit code is set to 0. However, the current check mistakenly
treats this as an assignment, causing the check to pass every time.
Consequently, regardless of how many tests have failed, if the latest test
passes, the PMTU test will report a pass.
Fixes:
|
||
|
|
db456d90a4 |
net: stmmac: xgmac: Enable support for multiple Flexible PPS outputs
From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit
to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays
in Fixed PPS mode by default.
XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are
read-only reserved, and they are already in Flexible mode by default, our
new code always set PPSEN{1,2,3} do not make things worse ;-)
Fixes:
|
||
|
|
e8ae8ad479 |
Fix termination state for idr_for_each_entry_ul()
The comment for idr_for_each_entry_ul() states
after normal termination @entry is left with the value NULL
This is not correct in the case where UINT_MAX has an entry in the idr.
In that case @entry will be non-NULL after termination.
No current code depends on the documentation being correct, but to
save future code we should fix it.
Also fix idr_for_each_entry_continue_ul(). While this is not documented
as leaving @entry as NULL, the mellanox driver appears to depend on
it doing so. So make that explicit in the documentation as well as in
the code.
Fixes:
|
||
|
|
a5e3b12745 |
swiotlb: do not free decrypted pages if dynamic
Fix these two error paths:
1. When set_memory_decrypted() fails, pages may be left fully or partially
decrypted.
2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
physical address is too high.
To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.
To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.
Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).
Cc: stable@vger.kernel.org
Fixes:
|
||
|
|
8f6f76a6a2 |
As usual, lots of singleton and doubleton patches all over the tree and
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
||
|
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
|
8d55b0a940 |
nouveau/gsp: add some basic registry entries.
The nvidia driver sets these two basic registry entries always, so copy it. Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
|
5177e5fa6e |
nouveau/gsp: fix message signature.
This original one was backwards, compared to traces from nvidia driver. Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
|
b5bad8c16b |
nouveau/gsp: move to 535.113.01
This moves the initial effort to the latest 535 firmware. The gsp msg structs have changed, and the message passing also. The wpr also seems to have some struct changes. This version of the firmware will be what we are stuck on for a while, until we can refactor the driver and work out a better path forward. Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
|
bc3012f4e3 |
This update includes the following changes:
API: - Add virtual-address based lskcipher interface. - Optimise ahash/shash performance in light of costly indirect calls. - Remove ahash alignmask attribute. Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc. - Remove some uses of obsolete algorithms (md4, md5, sha1). - Add FIPS 202 SHA-3 support in pkcs1pad. - Add fast path for single-page messages in adiantum. - Remove zlib-deflate. Drivers: - Add support for S4 in meson RNG driver. - Add STM32MP13x support in stm32. - Add hwrng interface support in qcom-rng. - Add support for deflate algorithm in hisilicon/zip. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmVB3vgACgkQxycdCkmx i6dsOBAAykbnX8BpnpnOXYywE9ZWrl98rAk51MK0N9olZNfg78zRPIv7fFxFdC20 SDJrDSNPmn0Qvaa5e0EfoAdklsm0k2GkXL/BwPKMKWUsyIoJVYI3WrBMnjBy9xMp yfME+h0bKoXJCZKnYkIUSGUejmUPSyRlEylrXoFlH/VWYwAaii/x9zwreQoF+0LR KI24A1q8AYs6Dw9HSfndaAub9GOzrqKYs6fSaMG+77Y4UC5aoi5J9Bp2G3uVyHay x/0bZtIxKXS9wn+LeG/3GspX23x/I5VwBOdAoMigrYmAIaIg5qgyMszudltTAs4R zF1Kh7WsnM5+vpnBSeigzo+/GGOU3QTz8y3tBTg+3ZR7GWGOwQLiizhOYqCyOfAH pIm6c++sZw/OOHiL69Nt4HeLKzGNYYWk3s4X/B/6cqoouPfOsfBaQobZNx9zfy7q ZNEvSVBjrFX/L6wDSotny1LTWLUNjHbmLaMV5uQZ/SQKEtv19fp2Dl7SsLkHH+3v ldOAwfoJR6QcSwz3Ez02TUAvQhtP172Hnxi7u44eiZu2aUboLhCFr7aEU6kVdBCx 1rIRVHD1oqlOEDRwPRXzhF3I8R4QDORJIxZ6UUhg7yueuI+XCGDsBNC+LqBrBmSR IbdjqmSDUBhJyM5yMnt1VFYhqKQ/ZzwZ3JQviwW76Es9pwEIolM= =IZmR -----END PGP SIGNATURE----- Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ... |
||
|
|
6803bd7956 |
ARM:
* Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
* Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
* Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
* Guest support for memory operation instructions (FEAT_MOPS)
* Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
* Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
* Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
* Miscellaneous kernel and selftest fixes
LoongArch:
* New architecture. The hardware uses the same model as x86, s390
and RISC-V, where guest/host mode is orthogonal to supervisor/user
mode. The virtualization extensions are very similar to MIPS,
therefore the code also has some similarities but it's been cleaned
up to avoid some of the historical bogosities that are found in
arch/mips. The kernel emulates MMU, timer and CSR accesses, while
interrupt controllers are only emulated in userspace, at least for
now.
RISC-V:
* Support for the Smstateen and Zicond extensions
* Support for virtualizing senvcfg
* Support for virtualized SBI debug console (DBCN)
S390:
* Nested page table management can be monitored through tracepoints
and statistics
x86:
* Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC,
which could result in a dropped timer IRQ
* Avoid WARN on systems with Intel IPI virtualization
* Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
* Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
* Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
* Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
* "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server
2022.
* Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
* Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
* Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
* Harden the fast page fault path to guard against encountering an invalid
root when walking SPTEs.
* Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
* Use the fast path directly from the timer callback when delivering Xen
timer events, instead of waiting for the next iteration of the run loop.
This was not done so far because previously proposed code had races,
but now care is taken to stop the hrtimer at critical points such as
restarting the timer or saving the timer information for userspace.
* Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
* Optimize injection of PMU interrupts that are simultaneous with NMIs.
* Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
* Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
* Zap EPT entries when non-coherent DMA assignment stops/start to prevent
using stale entries with the wrong memtype.
* Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y.
This was done as a workaround for virtual machine BIOSes that did not
bother to clear CR0.CD (because ancient KVM/QEMU did not bother to
set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
* Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
* Clean up the recognition of emulation failures on SEV guests, when KVM would
like to "skip" the instruction but it had already been partially emulated.
This makes it possible to drop a hack that second guessed the (insufficient)
information provided by the emulator, and just do the right thing.
Documentation:
* Various updates and fixes, mostly for x86
* MTRR and PAT fixes and optimizations:
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or
l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH
hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p
bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD
eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL
6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g==
=UIxm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
||
|
|
5be9911406 |
sh updates for v6.7
- locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
- Documentation: kernel-parameters: Add earlyprintk=bios on SH
- sh: bios: Revive earlyprintk support
- sh: machvec: Remove custom ioport_{un,}map()
- sh: Remove superhyway bus support
- sh: Remove unused SH4-202 support
- sh: Remove stale microdev board
-----BEGIN PGP SIGNATURE-----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=KwXl
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"While the previously announced patch series for converting arch/sh to
device trees is not yet ready for inclusion to mainline and therefore
didn't make it for this pull request, there are still a small number
changes for v6.7 which include one platform (board plus CPU and driver
code) removal plus two fixes.
The removal sent in by Arnd Bergmann concerns the microdev board which
was an early SuperH prototype board that was never used in production.
With the board removed, we were able to drop the now unused code for
the SH4-202 CPU and well as the driver code for the superhyway bus and
a custom implementation for ioport_map() and ioport_unmap() which will
allow us to simplify ioport handling in the future.
Another patch set by Geert Uytterhoeven revives SuperH BIOS
earlyprintk support which got accidentally disabled in
|
||
|
|
c9cacf7db3 |
ARM updates for v6.7-rc1
Development updates for v6.7-rc1 - fix some kernel-doc warnings - fix stack depot IRQ stack filter - cast memset() byte to unsigned char - explicitly include correct DI includes - fix ARCH_LOW_ADDRESS_LIMIT with CONFIG_ZONE_DMA - fix get_user() problems when linker uses a veneer - make including linux/uaccess.h self-contained on ARM -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmVDX7kACgkQ9OeQG+St rGS7GA/9EU3hny+4doTTJXnDonSXhgaOq91kcK1eMb1Ep0FEax6iIq4+T5SMQDoy hZkeRVyInH5zTfb5OnD0W53Haw4oUto3bf+PED7a22ZUQQ9fW/WPQy9Kzt/kefqJ apeU2yhmQntJGgobPqIOgPsknREz1nV4SThU2Ja/hqsU7jJVYejzY+1L7ORycpb5 FR0IZ3xTSTVKSTnsUJlJ8W/qJgl/di8hNU1U9LK2OC8sBb4VidLpq0+rz56p5sjk 5CTpwo7iENr1LZgKjQaT+uHmqzI3Hvp+MYmaucjUbJkLuXKwtBAVB1IK0Q/fVbP3 6YglcQXspUl07fC/I9ymOno8ZUWOBVHj4EKQdtfIV4OgWI+fF4zcrbZMBgqSD6hh N7+g/jZA/RFyC67pKFdHeuad1El1C0kx/KF0G9aNhn5pchlutCxfbAhcX6TpbG/6 R1cFvwQe8505yswQKQPL3siv1uSiS7QZ26uCZOPnt4HUgKW/8tcQsHA8k+QYN5iE F5YGmqsTurNUWELdwC0R4HlwRatNnt0CkEtU8qEy8QX0HhEeuatJv7UqtBW1ik61 FPkTNOBnLMRCcWRnHaJINXaG2cWmWE848axN419Hj4M8Sjp7CTOzjXRn1NkXyRpH DNLeC2dIPfafS3B90ehwtxgSePUc85Q1N6QwD0muhbvw1cYdQQA= =rUDE -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - fix some kernel-doc warnings - fix stack depot IRQ stack filter - cast memset() byte to unsigned char - explicitly include correct DI includes - fix ARCH_LOW_ADDRESS_LIMIT with CONFIG_ZONE_DMA - fix get_user() problems when linker uses a veneer - make including linux/uaccess.h self-contained on ARM * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9326/1: make <linux/uaccess.h> self-contained for ARM ARM: 9324/1: fix get_user() broken with veneer ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA ARM: 9322/1: Explicitly include correct DT includes ARM: 9321/1: memset: cast the constant byte to unsigned char ARM: 9320/1: fix stack depot IRQ stack filter ARM: 9319/1: sa1111: fix sa1111_probe kernel-doc warnings |
||
|
|
8c04bddc27 |
m68knommu: updates and fixes for v6.7
Fixes include. . improve default Kconfig ROM section settings . fix compilation for some Cleopatra boards . fixes and cleanups for warnings compiling with "W=1" -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEmsfM6tQwfNjBOxr3TiQVqaG9L4AFAmVDIXUACgkQTiQVqaG9 L4A6Bg//Q5WX+UHhmTBqtq+d/nKm0idmuTVHf9wgx5VKzQnkdLURFRdE7y6iTKEP gfdOH3YBIbwID3WgvhOy1ak9HDN0RceSSWkooytwqxV+5OTSpprrJfr512UsOCgi Lc+rk10LnYAwtX7apWRyygeA7KR33feYW4D7TRgQhuulyEG1x/L4IEsCN9wbpbjt LhwPddl6J+T3gbawQZm2QnziKojq6BvPySjvSI9gNOfFSJQiuBWxzT1Hp3hrgIe9 Tb5TuwT9hK7C/29zCMTGgGR+NgXTNXU8ED5QLVNCEvmPvVMuzg+Y0PWL0eFS1AFJ n6182F4iWVLtXGZhQL+FcJwHjJVX8S9UzK5QpKrITmeH+yz+c3JCXm+xP3b1e1u5 dFwyvRl1IdTN6wuXa45GFiPWdk/06rqBExWnoKQuAv0ThLa+Pv2Rh1ITWFJSXErK roe+zeohD0e7v1o4B8DPQlUyRomv+CWqexRWpDieREmjaNZ90JSde1pcthCppIni QP8sTFdimYHxVFOcickomA0i1vef0mO4OsNmx4UT5CvSCV5HzvLbh7geUJTTbmQx MCBp1W9Udi6eVTJsvmd1Qx9YvvhYb2csuhS1/jColAEWCqiysf9Ios+GPIbxRti3 p1whln8JVb9J0Qg89auu00MHeFh96sZYGwEI4NZeRSefz4uTW6A= =rBQb -----END PGP SIGNATURE----- Merge tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A few changes, most of them related to fixing warnings when compiling with "W=1". These follow up Geert's recent changes for M68K for this too. These ones complete the fixes for the nommu and ColdFire specific code. Also a couple of other fixes to improve ROM default addressing and compiling for the Cleopatra boards. Summary: - improve default Kconfig ROM section settings - fix compilation for some Cleopatra boards - fixes and cleanups for warnings compiling with 'W=1'" * tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: 68000: fix warning in timer code m68k: 68000: fix warnings in 68000 interrupt handling m68k: coldfire: remove unused variable in MMU code m68k: coldfire: fix warnings in uboot argument processing m68k: coldfire: make mcf_maskimr() static m68k: coldfire: ensure gpio prototypes visible m68k: coldfire: add and use "vectors.h" m68knommu: fix compilation for ColdFire/Cleopatra boards m68knommu: improve config ROM setting defaults |
||
|
|
43468456c9 |
RDMA for v6.7
The usual collection of patches:
- Bug fixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZUEvXwAKCRCFwuHvBreF
YQ/iAPkBl7vCH+oFGJKnh9/pUjKrWwRYBkGNgNesH7lX4Q/cIAEA+R3bAI2d4O4i
tMrRRowTnxohbVRebuy4Pfsoo6m9dA4=
=TxMJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Nothing exciting this cycle, most of the diffstat is changing SPDX
'or' to 'OR'.
Summary:
- Bugfixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
RDMA/mlx5: Fix mkey cache WQ flush
RDMA/hfi1: Workaround truncation compilation error
IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/hfi1: Remove redundant assignment to pointer ppd
RDMA/mlx5: Change the key being sent for MPV device affiliation
RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
RDMA/hns: Fix init failure of RoCE VF and HIP08
RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
RDMA/hns: The UD mode can only be configured with DCQCN
RDMA/hns: Add check for SL
RDMA/hns: Fix signed-unsigned mixed comparisons
RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
RDMA/hns: Fix printing level of asynchronous events
RDMA/core: Add support to set privileged QKEY parameter
RDMA/bnxt_re: Do not report SRQ error in srq notification
RDMA/bnxt_re: Report async events and errors
RDMA/bnxt_re: Update HW interface headers
IB/mlx5: Fix rdma counter binding for RAW QP
...
|
||
|
|
6ed92e559a |
SCSI misc on 20231102
Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZUORLiYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQ4WAQDDIhzp /PiJBBtt0U9ii/lYqRLrOVnN0extKEgEGO+FbwEAssKgs+5Jn/7XCgdpSrx8Co3/ 0cPXrZGxs7tFpFWLZjM= =AlRU -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ... |
||
|
|
90a300dc05 |
libnvdimm updates for v6.7
- updates to deprecated and changed interfaces - bug/kdoc fixes -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZULdfxQcaXJhLndlaW55 QGludGVsLmNvbQAKCRCebuN7TNx1MaDDAP9sCcjx4o49EXWST/x2z/Si0EUMEq+y mtsVBRqYO32jXAD9HuAA4K/ECNjbT3ENQO8WWYQqZOcbYgBRFQKi8mmaKAY= =0WCP -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: - updates to deprecated and changed interfaces - bug/kdoc fixes * tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: remove kernel-doc warnings: testing: nvdimm: make struct class structures constant libnvdimm: Annotate struct nd_region with __counted_by nd_btt: Make BTT lanes preemptible libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value dax: refactor deprecated strncpy |
||
|
|
e576033588 |
Pull request for IPMI
Well, only one change, and I would normally just wait, but it will make the people trying to get rid of strncpy happy. Its a good change, anyway. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmVCsCgACgkQYfOMkJGb /4Hx6BAAjVYJOOlVrzL1P4RoJw6CPQcZqRtun9tJ44lCDt0ZBZMdc2RmMMS4b5jy ilNjKKez9xKWBIYSH1QEbs5wJlkq1KoQejc/dqZLTmWDQDciURf6LGLtQGSP7zH4 HKYahGCKo5iAnWYN/ZUgZklmkDehhjJWLZlTpfLwB/0ZaitPMkYuRIp9Expw2DIe n0fXibzE2V1dZkrYXtps/M23n3fjJCVK2uKXLmB2S9BIEnVlu5oOWnEw/9GSAdQX v+B9UV/A06sDWKIPxhkwZzrQZrUm42GHuOmllxJum6IJqDtxZjSMZuZjEsDHlkcr UrmQ60ep+cfKdyg5S0eKpFntcEhM+e1XIEhOBN8SZynCwULOZbcZBJpSF2eaULb+ 00bIqVMzv62c0Itm5dshWqNVQLgiJUhghnWF5jewy/nWtIROLiqRRLUyoyWKgioL lB3Ry/xIap3kyuzRu5MjZAQ2rtznAjyaQPYEkAbXxXsMxUmxsr+4eveEHENVXWwj NmX0toH51N0smmr4qByW3XdwqfTaji3uvv7Vm3DBCy0wF8JO0Q93/6WhEaODSOqs H9EYUDA2foJIakWqG6USV0f0yfweCpkEx+THTjT3crssbhQy/+TkOOqRShJYI3xD Dp1LkfNY8qbNzo9J4BDp1vc7Bjg09sFnNQeTX4L9EKlI2miNDFI= =xBYP -----END PGP SIGNATURE----- Merge tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi Pull IPMI update from Corey Minyard: "Only one change, and I would normally just wait, but it will make the people trying to get rid of strncpy happy. Its a good change, anyway" * tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi: ipmi: refactor deprecated strncpy |
||
|
|
431f105188 |
- Core Frameworks
- Add support for a bunch more colours
- New Drivers
- Add support for Kinetic KTD2026/7 RGB/White LEDs
- New Functionality
- Add support for device to enter HW Controlled Mode to Turris Omnia LEDs
- Add support for HW Gamma Correction to Turris Omnia LEDs
- Fix-ups
- Apply new __counted_by() annotation to several data structures containing flexible arrays
- Rid the return value from Platform's .remove() operation
- Use *_cansleep() variants for instances were threads can sleep
- Improve the semantics when setting the brightness
- Generic clean-ups; code reduction, coding style, standard patterns
- Replace strncpy() with strscpy()
- Fix-up / add various documentation
- Re-author the GPIO associated Trigger to use trigger-sources
- Move to using standard APIs and helpers
- Improve error checking
- Stop using static GPIO bases
- Bug Fixes
- Fix Pointer to Enum casing warnings
- Do not pretend that I2C backed device supports SMBUS
- Ensure PWM LEDs are extinguished when disabled, rather than held in a state
- Fix 'output may be truncated' warnings
-----BEGIN PGP SIGNATURE-----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=XYXV
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add support for a bunch more colours
New Drivers:
- Add support for Kinetic KTD2026/7 RGB/White LEDs
New Functionality:
- Add support for device to enter HW Controlled Mode to Turris Omnia
LEDs
- Add support for HW Gamma Correction to Turris Omnia LEDs
Fix-ups:
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Rid the return value from Platform's .remove() operation
- Use *_cansleep() variants for instances were threads can sleep
- Improve the semantics when setting the brightness
- Generic clean-ups; code reduction, coding style, standard patterns
- Replace strncpy() with strscpy()
- Fix-up / add various documentation
- Re-author the GPIO associated Trigger to use trigger-sources
- Move to using standard APIs and helpers
- Improve error checking
- Stop using static GPIO bases
Bug Fixes:
- Fix Pointer to Enum casing warnings
- Do not pretend that I2C backed device supports SMBUS
- Ensure PWM LEDs are extinguished when disabled, rather than held in
a state
- Fix 'output may be truncated' warnings"
* tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits)
leds: lp5521: Add an error check in lp5521_post_init_device
leds: gpio: Update headers
leds: gpio: Remove unneeded assignment
leds: gpio: Move temporary variable for struct device to gpio_led_probe()
leds: gpio: Refactor code to use devm_gpiod_get_index_optional()
leds: gpio: Utilise PTR_ERR_OR_ZERO()
leds: gpio: Keep driver firmware interface agnostic
leds: core: Refactor led_update_brightness() to use standard pattern
leds: turris-omnia: Fix brightness setting and trigger activating
leds: sc27xx: Move mutex_init() down
leds: trigger: netdev: Move size check in set_device_name
leds: Add ktd202x driver
dt-bindings: leds: Add Kinetic KTD2026/2027 LED
leds: core: Add more colors from DT bindings to led_colors
dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME)
leds: tca6507: Don't use fixed GPIO base
leds: lp3952: Convert to use maple tree register cache
leds: lm392x: Convert to use maple tree register cache
leds: aw200xx: Convert to use maple tree register cache
leds: lm3601x: Convert to use maple tree register cache
...
|
||
|
|
38984d7872 |
- New Functionality
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C step-up converter
- Document brightness-levels in bindings for; generic, LED and PWM
- Bug Fixes
- Ensure PWMs are disabled on; .shutdown(), .suspend() and .remove()
-----BEGIN PGP SIGNATURE-----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=djoj
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C
step-up converter
- Document brightness-levels in bindings for; generic, LED and PWM
Bug Fixes:
- Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()"
* tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
dt-bindings: backlight: Add brightness-levels related common properties
backlight: pwm_bl: Disable PWM on shutdown, suspend and remove
dt-bindings: backlight: Add MPS MP3309C
|
||
|
|
27bc0782ef |
- Core Frameworks
- Allow all MFD Cell properties to be filled in dynamically at runtime
- Skip disabled device nodes and continue to look for subsequent devices
- New Device Support
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
- New Functionality
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
- Fix-ups
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures containing flexible arrays
- Replace strncpy() with strscpy()
- Bug Fixes
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection sets set when booting with ACPI
-----BEGIN PGP SIGNATURE-----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=rwPH
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
|
||
|
|
edd8e84ae9 |
sound updates for 6.7
Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization. Other than that, there
have little change wrt API, rather lots of driver-specific updates and
fixes. Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list
-----BEGIN PGP SIGNATURE-----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=2/dI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
||
|
|
4ea4ed22b5 |
for-linus-2023110101
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZUGPxqZi849r7WBJAQIMkhAAxZqCeGjJ2QsO/C41DodzxbVVyvfkPWwC zkNL0KORtTmaGI4UOhakh0447lyUwNN1GT17GXIC7BjD8BCm0vm/474FOI9hXsEb wHP4RsVUTb2zK5r6zeWvzurLmBmsryCKb95Co4o7yPXKY4DHSjyYgvAJIOEOl9ov rmk3SZ8SweFp6SlkxANjZ3jU1CF13EmUOL9yPviXfXSa0qYAeIVF3kMMJoNMsi61 wl32r4NZJg6JpkUxyDUlWAayB0R9L8ean+t+UbH1sOzWhISOizn0Ceq6Nh+9X0AO DIulQv9z8GDgn9JkkwFExd5oU9Tknd6eSCeiAN4RlB4iqOhET13pgeUxcwayrQ+4 WwBncKfJf/1gFu7nQCloQ0qEm+Ehq6CPVmeNa+xEBNPlD6nsRXldNnVqTG4I0rtF thB2Ep2w+7luS49wqN93R6sgmWBunSwGpRN7eo5hpLoJ1ybhFT5pn8PX7Brflkyn Ru934APRChMf1WKdTgZu9sGkLpgRBMDe1836kkTiLAO6aJu45ln5H7L5nBzQ4aUB cjj5kv7j2aE4TPWXOvvd0KwLPU66TJ6j/n6SrEqWUQicsJNp09sUpMAzfjhS7gZG ipJBEoiC6dBHRikaEy3+lLBrfEnq0ptfLUDBiOClzilsrgTGwCqgcNaDpKuqCCfN TEN9LoDIIs8= =Xcc6 -----END PGP SIGNATURE----- Merge tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic driver (Jinjie Ruan) - HID selftests fixes and improvements (Benjamin Tissoires) - probe error handling path fixes in hid-nvidia-shield driver (Christophe JAILLET) - cleanup of LED handling in hid-nintendo (Martino Fontana) - big cleanup of logitech-hidpp probe code (Hans de Goede) - Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin) - firmware detection improvement for Lenovo cptkbd (Mikhail Khvainitski) - IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver (Danny Kaehn) - #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh) - other assorted device-ID additions and quirks * tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits) HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W HID: logitech-hidpp: Stop IO before calling hid_connect() HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING HID: logitech-hidpp: Drop delayed_work_cb() HID: logitech-hidpp: Fix connect event race HID: logitech-hidpp: Remove unused connected param from *_connect() HID: logitech-hidpp: Remove connected check for non-unifying devices HID: logitech-hidpp: Add hidpp_non_unifying_init() helper HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init() HID: logitech-hidpp: Remove wtp_get_config() call from probe() HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event() HID: logitech-hidpp: Revert "Don't restart communication if not necessary" HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only HID: rmi: remove #ifdef CONFIG_PM HID: multitouch: remove #ifdef CONFIG_PM HID: usbhid: remove #ifdef CONFIG_PM HID: core: remove #ifdef CONFIG_PM from hid_driver hid: lenovo: Resend all settings on reset_resume for compact keyboards HID: uclogic: Fix a work->entry not empty bug in __queue_work() ... |
||
|
|
27beb3ca34 |
pci-v6.7-changes
-----BEGIN PGP SIGNATURE-----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=G//C
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
||
|
|
4b92894064 |
lib/fw_table: Remove acpi_parse_entries_array() export
Stephen reports that the ACPI helper library rework,
CONFIG_FIRMWARE_TABLE, introduces a new compiler warning:
WARNING: modpost: vmlinux: acpi_parse_entries_array: EXPORT_SYMBOL used
for init symbol. Remove __init or EXPORT_SYMBOL.
Delete this export as it turns out it is unneeded, and future work wraps
this in another exported helper. Note that in general
EXPORT_SYMBOL_ACPI_LIB() is needed for exporting symbols that are marked
__init_or_acpilib, but in this case no export is required.
Fixes:
|