No functional change, just some trivial whitespace fixups.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.
Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.
Fixes: 317dcdecaf ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hyper-V enabled Windows Server 2022 KVM VM cannot be started on Zen1 Ryzen
since it crashes at boot with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED +
STATUS_PRIVILEGED_INSTRUCTION (in other words, because of an unexpected #GP
in the guest kernel).
This is because Windows tries to set bit 8 in MSR_AMD64_TW_CFG and can't
handle receiving a #GP when doing so.
Give this MSR the same treatment that commit 2e32b71906
("x86, kvm: Add MSR_AMD64_BU_CFG2 to the list of ignored MSRs") gave
MSR_AMD64_BU_CFG2 under justification that this MSR is baremetal-relevant
only.
Although apparently it was then needed for Linux guests, not Windows as in
this case.
With this change, the aforementioned guest setup is able to finish booting
successfully.
This issue can be reproduced either on a Summit Ridge Ryzen (with
just "-cpu host") or on a Naples EPYC (with "-cpu host,stepping=1" since
EPYC is ordinarily stepping 2).
Alternatively, userspace could solve the problem by using MSR filters, but
forcing every userspace to define a filter isn't very friendly and doesn't
add much, if any, value. The only potential hiccup is if one of these
"baremetal-only" MSRs ever requires actual emulation and/or has F/M/S
specific behavior. But if that happens, then KVM can still punt *that*
handling to userspace since userspace MSR filters "win" over KVM's default
handling.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1ce85d9c7c9e9632393816cf19c902e0a3f411f1.1697731406.git.maciej.szmigiero@oracle.com
[sean: call out MSR filtering alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmUxOtMACgkQu+CwddJF
iJqwmgf/UYBHiwWoGXOuLCDBvm2Z4GwQyGH347IVooDpY28/NoWqeGeYbllvqj9k
2EhP5zWLT945nt4L2Si98hn0ikqZ4DyljrHv/zpQShqKII7Ddh3o3j5r60Cbhyql
9HAhei2I2lhiVLQBuQ2MQxFYeXW38s1XRL9/OY6nph8tYC2GvafVei3a0YHiT5J3
CwkWQs+TV8R5RSFVE52htPV2PWx2+ZI5apyEeu9yuXZr22RuRsAgZM27QjakNrGI
bFdShWQwnWSf/MmtuEtqXwBw4dpvLyG9gqVaeMZUydrW7OotR9kLvnL2yhoMvNb6
7bq+cJniwLj31uYRHgIALzzaVjA88Q==
=hkq/
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- stable fix to prevent kernel warnings with KASAN_HW_TAGS on arm64
due to improperly resolved kmalloc alignment restrictions (Catalin
Marinas)
* tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()
Starting with commit 5d8edfb900 ("iomap: Copy larger chunks from
userspace"), iomap_write_iter() can get into endless loop. This can
be reproduced with LTP writev07 which uses partially valid iovecs:
struct iovec wr_iovec[] = {
{ buffer, 64 },
{ bad_addr, 64 },
{ buffer + 64, 64 },
{ buffer + 64 * 2, 64 },
};
commit bc1bb416bb ("generic_perform_write()/iomap_write_actor():
saner logics for short copy") previously introduced the logic, which
made short copy retry in next iteration with amount of "bytes" it
managed to copy:
if (unlikely(status == 0)) {
/*
* A short copy made iomap_write_end() reject the
* thing entirely. Might be memory poisoning
* halfway through, might be a race with munmap,
* might be severe memory pressure.
*/
if (copied)
bytes = copied;
However, since 5d8edfb900 "bytes" is no longer carried into next
iteration, because it is now always initialized at the beginning of
the loop. And for iov_iter_count < PAGE_SIZE, "bytes" ends up with
same value as previous iteration, making the loop retry same copy
over and over, which leads to writev07 testcase hanging.
Make next iteration retry with amount of bytes we managed to copy.
Fixes: 5d8edfb900 ("iomap: Copy larger chunks from userspace")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTD6IQAKCRCRxhvAZXjc
opXLAQC9X+ECnGUAOy/kvOrEBkBb7G4BuZ8XsrnL976riVNp0gEA85LaJV9Ow7Xk
51k/1ujhYkglQbCsa0zo+mI4ueE3wAQ=
=Dqrj
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"An openat() call from io_uring triggering an audit call can apparently
cause the refcount of struct filename to be incremented from multiple
threads concurrently during async execution, triggering a refcount
underflow and hitting a BUG_ON(). That bug has been lurking around
since at least v5.16 apparently.
Switch to an atomic counter to fix that. The underflow check is
downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
remove that check altogether tbh"
* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
audit,io_uring: io_uring openat triggers audit reference count underflow
This reverts commit 108a36d07c.
It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
Supports Wake-on: pg
Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
Wake-on: pg
...
This worked correctly before this commit because we were always updating
a zero bitmap (since commit 6699170376 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d07c ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEh0DEKNP0I9IjwfWEqbAzH4MkB7YFAmUwyyAACgkQqbAzH4Mk
B7aQsg/9FohvuET2YOqYlmtgbq1YjFlWkVxoNB2Be4gxKEqRcFN4V/O8PrOD0ZBX
KH8ASWGp9EKQlVKucAPUhSaZMv4u2HaKTVyRnH5KpUmNG7rC7EzRgYDY4xA5RfjL
aIxgVOhaSibFBGfys2KoS8MHFgZ9mcCWZZ1154ueSkZfX9ghytZcql5i4Ahi2OGQ
u+aa/tkhoIS9ZKWp/uIz4R+fDClrG8UoiWmJ1LoOHQ5YM3enboOld6Zz1CjbC9yN
ldInX7klL9aHRf3SoAeRVCyL23e4GB5R4+QmBhZQemhwy0jF0/7E0kCmCK0wYFWn
3t1M/+i0S7o7rI+utTA2mTuZzxnNPMXJsn2TnpH9vv1o633WOlL0mrvsM7Z/NJDz
VShPinQ9eJGvZQ9kYuMfZODtK0BP7OV8mRi7aXinzHucG+ISB2fBGxsnA0lX9EfT
fHix1oNI33lfazVzaStJ3hs/n9KXwP/9P49rBcLh75O2t3TBKc2T84qpywNx+W6S
9GDMV5V2FNWf/hMCL8pcTtab3MvpbeU5DqKnxW1D1vu2vdGiHVum/Aq26aE5W7nl
EcE5pjKppdNZgk3Qwj190vym7d8lbK4Esua6ieNM/qvWb7hAGoZO7Tjcypvj+YMY
W4aiJTW/jULPT2tkUvLvHg/r5DFHi30v6eCeTCrPfivxFRIAzBQ=
=ScrJ
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
- memory leak
- some logic errors, NULL dereferences
- some code was refactored
- more sanity checks
* tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Avoid possible memory leak
fs/ntfs3: Fix directory element type detection
fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()
fs/ntfs3: Fix OOB read in ntfs_init_from_boot
fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()
fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
fs/ntfs3: Do not allow to change label if volume is read-only
fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
fs/ntfs3: Refactoring and comments
fs/ntfs3: Fix alternative boot searching
fs/ntfs3: Allow repeated call to ntfs3_put_sbi
fs/ntfs3: Use inode_set_ctime_to_ts instead of inode_set_ctime
fs/ntfs3: Fix shift-out-of-bounds in ntfs_fill_super
fs/ntfs3: fix deadlock in mark_as_free_ex
fs/ntfs3: Add more attributes checks in mi_enum_attr()
fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
fs/ntfs3: Write immediately updated ntfs state
fs/ntfs3: Add ckeck in ni_update_parent()
Mat Martineau says:
====================
mptcp: Fixes for v6.6
Patch 1 corrects the logic for MP_JOIN tests where 0 RSTs are expected.
Patch 2 ensures MPTCP packets are not incorrectly coalesced in the TCP
backlog queue.
Patch 3 avoids a zero-window probe and associated WARN_ON_ONCE() in an
expected MPTCP reinjection scenario.
Patches 4 & 5 allow an initial MPTCP subflow to be closed cleanly
instead of always sending RST. Associated selftest is updated.
====================
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-0-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.
That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.
We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.
This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christoph reported that the MPTCP protocol can find the subflow-level
write queue unexpectedly not empty while crafting a zero-window probe,
hitting a warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70
Modules linked in:
CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312
RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00
RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b
RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c
R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580
R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200
FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0
Call Trace:
<TASK>
__subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545
__mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614
mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391
release_sock+0xf6/0x100 net/core/sock.c:3521
mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746
process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630
worker_thread+0x3a7/0x610 kernel/workqueue.c:2784
kthread+0x143/0x180 kernel/kthread.c:388
ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304
</TASK>
The root cause of the issue is that expectations are wrong: e.g. due
to MPTCP-level re-injection we can hit the critical condition.
Explicitly avoid the zero-window probe when the subflow write queue
is not empty and drop the related warnings.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/444
Fixes: f70cad1085 ("mptcp: stop relying on tcp_tx_skb_cache")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.
Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.
Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().
Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bitmasks for EMAC_PORT_DISABLE and EMAC_PORT_FORWARD r30 commands are
wrong in the driver.
Update the bitmasks of these commands to the correct ones as used by the
ICSSG firmware. These bitmasks are backwards compatible and work with
any ICSSG firmware version.
Fixes: e9b4ece7d7 ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231018150715.3085380-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align devlink info versions with ice driver so change 'fw.mgmt'
version to be 2-digit version [major.minor], add 'fw.mgmt.build'
that reports mgmt firmware build number and use '"fw.psid.api'
for NVM format version instead of incorrect '"fw.psid'.
Additionally add missing i40e devlink documentation.
Fixes: 5a423552e0 ("i40e: Add handler for devlink .info_get")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018123558.552453-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring says:
====================
dt-bindings: net: Child node schema cleanups
This is a series of clean-ups related to ensuring that child node
schemas are constrained to not allow undefined properties. Typically,
that means just adding additionalProperties or unevaluatedProperties as
appropriate. The DSA/switch schemas turned out to be a bit more
involved, so there's some more fixes and a bit of restructuring in them.
====================
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-0-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Constraints on 'ethernet-ports' node properties are already defined by the
reference to ethernet-switch.yaml, so they can be dropped from the DSA
schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-8-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mscc,vsc7514-switch schema doesn't add any custom port properties,
so it can just reference ethernet-switch.yaml#/$defs/base and
dsa.yaml#/$defs/ethernet-ports instead of the base file and can skip
defining port nodes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-7-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The indentation for the example is completely messed up for
'ethernet-ports'. Fix it.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-6-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The name "base" is misleading as the definition is for a complete schema
definition without additional properties allowed, not a "base class".
Align the same to be the same as dsa.yaml. This schema file without any
json pointer path is the base schema which can be extended.
There are not yet any references to $defs/base to update.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-5-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '$defs/ethernet-ports' schema is referenced by schemas defining a
child node 'ethernet-ports', but this schema misses the
'ethernet-ports' node. It would work if referring schemas made a
reference like this:
properties:
ethernet-ports:
$ref: ethernet-switch.yaml#/$defs/ethernet-ports
However, that would be different from how dsa.yaml works. For
consistency, align the schema definition with dsa.yaml and add the
missing level.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-4-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'ethernet-port' node unit-addresses should be in hexadecimal. Some
instances have it correct, but fix the ones that don't.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-3-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
What's connected on the MDIO bus is outside the scope of the binding for
ethernet controller's MDIO bus unless it's a fixed internal device, so
drop the node name and reference to ethernet-phy.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-2-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties or additionalProperties as appropriate.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-1-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GrNu
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Fix a bug in chunk size decision that could lead to suboptimal
placement and filling patterns"
* tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix stripe length calculation for non-zoned data chunk allocation
All the PMU init functions want the default sysfs attribute groups, and so
these all call armv8_pmu_init_nogroups() helper, with none of them calling
armv8_pmu_init() directly. When we introduced armv8_pmu_init_nogroups() in
the commit e424b17985 ("arm64: perf: Refactor PMU init callbacks")
... we thought that we might need custom attribute groups in future, but
as we evidently haven't, we can remove the option.
This patch folds armv8_pmu_init_nogroups() into armv8_pmu_init(), removing
the ability to use custom attribute groups and simplifying the code.
CC: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231016025436.1368945-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the PMUv3 driver only reads PMMIR_EL1 if the PMU implements
FEAT_PMUv3p4 and the STALL_SLOT event, but the check for STALL_SLOT event
isn't necessary and can be removed.
The check for STALL_SLOT event was introduced with the read of PMMIR_EL1 in
commit f5be3a61fd ("arm64: perf: Add support caps under sysfs")
When this logic was written, the ARM ARM said:
| If STALL_SLOT is not implemented, it is IMPLEMENTATION DEFINED whether
| the PMMIR System registers are implemented.
... and thus the driver had to check for STALL_SLOT event to verify that
PMMIR_EL1 was implemented and accesses to PMMIR_EL1 would not be UNDEFINED.
Subsequently, the architecture was retrospectively tightened to require
that any FEAT_PMUv3p4 implementation implements PMMIR_EL1. Since the G.b
release of the ARM ARM, the wording regarding STALL_SLOT event has been
removed, and the description of PMMIR_EL1 says:
| This register is present only when FEAT_PMUv3p4 is implemented.
Drop the unnecessary check for STALL_SLOT event when reading PMMIR_EL1.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231013024354.1289070-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
As explained in the previous commit, xfs_rtallocate_extent_near() looks
for the end of a free extent when searching backwards from the target
bitmap block. Since the previous commit, it searches from the last
bitmap block it checked to the bitmap block containing the start of the
extent.
This may still be more than necessary, since the free extent may not be
that long. We know the maximum size of the free extent from the realtime
summary. Use that to compute how many bitmap blocks we actually need to
check.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_rtallocate_extent_near() tries to find a free extent as close to a
target bitmap block given by bbno as possible, which may be before or
after bbno. Searching backwards has a complication: the realtime summary
accounts for free space _starting_ in a bitmap block, but not straddling
or ending in a bitmap block. So, when the negative search finds a free
extent in the realtime summary, in order to end up closer to the target,
it looks for the end of the free extent. For example, if bbno - 2 has a
free extent, then it will check bbno - 1, then bbno - 2. But then if
bbno - 3 has a free extent, it will check bbno - 1 again, then bbno - 2
again, and then bbno - 3. This results in a quadratic loop, which is
completely pointless since the repeated checks won't find anything new.
Fix it by remembering where we last checked up to and continue from
there. This also obviates the need for a check of the realtime summary.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_rtallocate_extent_near() calls xfs_rtallocate_extent_block() with
the minlen and maxlen that were passed to it.
xfs_rtallocate_extent_block() then scans the bitmap block looking for a
free range of size maxlen. If there is none, it has to scan the whole
bitmap block before returning the largest range of at least size minlen.
For a fragmented realtime device and a large allocation request, it's
almost certain that this will have to search the whole bitmap block,
leading to high CPU usage.
However, the realtime summary tells us the maximum size available in the
bitmap block. We can limit the search in xfs_rtallocate_extent_block()
to that size and often stop before scanning the whole bitmap block.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Instead of only returning whether there is any free space, return the
maximum size, which is fast thanks to the previous commit. This will be
used by two upcoming optimizations.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 355e353213 ("xfs: cache minimum realtime summary level"), I
added a cache of the minimum level of the realtime summary that has any
free extents. However, it turns out that the _maximum_ level is more
useful for upcoming optimizations, and basically equivalent for the
existing usage. So, let's change the meaning of the cache to be the
maximum level + 1, or 0 if there are no free extents.
For example, if the cache contains:
{0, 4}
then there are no free extents starting in realtime bitmap block 0, and
there are no free extents larger than or equal to 2^4 blocks starting in
realtime bitmap block 1. The cache is a loose upper bound, so there may
or may not be free extents smaller than 2^4 blocks in realtime bitmap
block 1.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Simplify the calling convention of these functions since the
xfs_rtalloc_args structure contains the parameters we need.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that xfs_rtalloc_args holds references to the last-read bitmap and
summary blocks, we don't need to pass the buffer pointer out of
xfs_rtbuf_get.
Callers no longer have to xfs_trans_brelse on their own, though they are
required to call xfs_rtbuf_cache_relse before the xfs_rtalloc_args goes
out of scope.
While we're at it, create some trivial helpers so that we don't have to
remember if "0" means "bitmap" and "1" means "summary".
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Profiling a workload on a highly fragmented realtime device showed a ton
of CPU cycles being spent in xfs_trans_read_buf() called by
xfs_rtbuf_get(). Further tracing showed that much of that was repeated
calls to xfs_rtbuf_get() for the same block of the realtime bitmap.
These come from xfs_rtallocate_extent_block(): as it walks through
ranges of free bits in the bitmap, each call to xfs_rtcheck_range() and
xfs_rtfind_{forw,back}() gets the same bitmap block. If the bitmap block
is very fragmented, then this is _a lot_ of buffer lookups.
The realtime allocator already passes around a cache of the last used
realtime summary block to avoid repeated reads (the parameters rbpp and
rsb). We can do the same for the realtime bitmap.
This replaces rbpp and rsb with a struct xfs_rtbuf_cache, which caches
the most recently used block for both the realtime bitmap and summary.
xfs_rtbuf_get() now handles the caching instead of the callers, which
requires plumbing xfs_rtbuf_cache to more functions but also makes sure
we don't miss anything.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since the commit 6812d1dfbc ("thermal/drivers/qcom/tsens-v0_1: Fix
mdm9607 slope values") the default v0.1 implementation of tsens
options is unused by the driver. Drop it now to stop compiler
complaining about the unused static const. If it appears there is the
need for the default v0.1 ops struct, this commit can be easily
reverted without further considerations.
Fixes: 6812d1dfbc ("thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231019144311.1035181-1-dmitry.baryshkov@linaro.org
The static files placement by `rustdoc` changed in Rust 1.67.0 [1],
but the custom code we have to replace the logo in the generated
HTML files did not get updated.
Thus update it to have the Linux logo again in the output.
Hopefully `rustdoc` will eventually support a custom logo from
a local file [2], so that we do not need to maintain this hack
on our side.
Link: https://github.com/rust-lang/rust/pull/101702 [1]
Link: https://github.com/rust-lang/rfcs/pull/3226 [2]
Fixes: 3ed03f4da0 ("rust: upgrade to Rust 1.68.2")
Cc: stable@vger.kernel.org
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20231018155527.1015059-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust code documentation output path moved from `rust/doc` to
`Documentation/output/rust/rustdoc`. The `make cleandocs` target
takes care of cleaning it now since it is integrated with the rest
of the documentation.
Thus remove the old reference.
Fixes: 48fadf4400 ("docs: Move rustdoc output, cross-reference it")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20231018160145.1017340-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust code documentation output path moved from `rust/doc` to
`Documentation/output/rust/rustdoc`, thus update the old reference.
Fixes: 48fadf4400 ("docs: Move rustdoc output, cross-reference it")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20231018160145.1017340-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Struct paicrypt_map is a data structure and is statically defined
for each possible CPU. Rework this and replace it by dynamically
allocated data structures created when a perf_event_open() system call
is invoked.
It is replaced by an array of pointers to all possible CPUs and
reference counting. The array of pointers is allocated when the first
event is created. For each online CPU an event is installed on, a struct
paicrypt_map is allocated and a pointer to struct cpu_cf_events is
stored in the array:
CPU 0 1 2 3 ... N
+---+---+---+---+---+---+
paicrypt_root::mapptr--> | * | | | |...| |
+-|-+---+---+---+---+---+
|
|
\|/
+--------------+
| paicrypt_map |
+--------------+
With this approach the large data structure is only allocated when
an event is actually installed and used.
Also implement proper reference counting for allocation and removal.
PAI crypto counter events can not be created when a CPU hot plug
add is processed. This means a CPU hot plug add does not get
the necessary PAI event to record PAI cryptography counter increments
on the newly added CPU. There is no possibility to notify user space
of a new CPU and the necessary event infrastructure assoiciated with
the file descriptor returned by perf_event_open() system call.
However system call perf_event_open() can use the newly added CPU
when issued after the CPU hot plug add.
Kernel CPU hot plug remove deletes the CPU and stops the PAI counters on
that CPU. When the process closes the file descriptor associated
with that event, the event's destroy() function removes any
allocated data structures and adjusts the reference counts.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of this W=1 compile warning:
arch/s390/mm/vmem.c:502:6: warning: no previous prototype for ‘vmemmap_free’ [-Wmissing-prototypes]
502 | void vmemmap_free(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove unnecessary __GFP_HIGHMEM masking, which was introduced with
commit 6326c26c15 ("s390: convert various pgalloc functions to use
ptdescs"). Also remove a whitespace change which was introduced with
the same commit.
Link: https://lore.kernel.org/all/CAOzc2px-SFSnmjcPriiB3cm1fNj3+YC8S0VSp4t1QvDR0f4E2A@mail.gmail.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap
are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that
zdev->iommu_bitmap is a pointer to unsigned long but the above only
yields an allocation that is a multiple of sizeof(unsigned long) which
is 8 on s390x if the number of IOMMU pages is a multiple of 64.
This in turn is the case only if the effective IOMMU aperture is
a multiple of 64 * 4K = 256K. This is usually the case and so didn't
cause visible issues since both the virt_to_phys(high_memory) reduced
limit and hardware limits use nice numbers.
Under KVM, and in particular with QEMU limiting the IOMMU aperture to
the vfio DMA limit (default 65535), it is possible for the reported
aperture not to be a multiple of 256K however. In this case we end up
with an iommu_bitmap whose allocation is not a multiple of
8 causing bitmap operations to access it out of bounds.
Sadly we can't just fix this in the obvious way and use bitmap_zalloc()
because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap
grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper.
This might be a candidate for common code, but this area of code will
be replaced by the upcoming conversion to use the common code DMA API on
s390 so just add a local routine.
Fixes: 2245932155 ("s390/pci: use virtual memory for iommu bitmap")
Fixes: 13954fd691 ("s390/pci_dma: improve lazy flush for unmap")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug
callbacks after the device has been unregistered, leading to fireworks
when we try to execute empty function callbacks within the driver:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1
| Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021
| pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
| pc : perf_pmu_migrate_context+0x98/0x38c
| lr : perf_pmu_migrate_context+0x94/0x38c
|
| Call trace:
| perf_pmu_migrate_context+0x98/0x38c
| hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu]
Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been unregistered.
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231019091352.998964-1-shaojijie@huawei.com
[will: Rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>
When dumping a struct_ops, 2 dictionaries are emitted.
When using `name`, they were already wrapped in an array, but not when
using `id`. Causing `jq` to fail at parsing the payload as it reached
the comma following the first dict.
This change wraps those dictionaries in an array so valid json is emitted.
Before, jq fails to parse the output:
```
$ sudo bpftool struct_ops dump id 1523612 | jq . > /dev/null
parse error: Expected value before ',' at line 19, column 2
```
After, no error parsing the output:
```
sudo ./bpftool struct_ops dump id 1523612 | jq . > /dev/null
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-3-chantr4@gmail.com
When printing a pointer value, "%p" will either print the hexadecimal
value of the pointer (e.g `0x1234`), or `(nil)` when NULL.
Both of those are invalid json "integer" values and need to be wrapped
in quotes.
Before:
```
$ sudo bpftool struct_ops dump name ned_dummy_cca | grep next
"next": (nil),
$ sudo bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
parse error: Invalid numeric literal at line 29, column 34
```
After:
```
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | grep next
"next": "(nil)",
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
"(nil)"
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-2-chantr4@gmail.com
New features across K3 SoCs:
- Watchdog and ESM nodes for J7xx
- DMA node for Camera interface (CSI) for J7xx
- C7x DSP and R5F rproc support for J7xx/AM68/AM69
AM68:
- USB and PCIe support
AM64:
- IO expander support
- GPIO LED, I2C device supplies for am64-tqma64xxl-mbax4xxl
- RTC IRQ pin update for am64 phycore
AM62A:
- TPS6593 PMIC and mcasp audio support
Misc:
- bootph-* tag addition for AM64 and AM62
- iw416 based bluetooth support on verdin-am62
- IO Expander addition for AM64 and AM65 boards
Fixes:
- Convert DMSS/NAVSS to simple-bus compatible to squelch dtbs_check
warnings
- Minor indentation fixes
- Specify base dtb for k3-j721s2-evm-gesi.dtbo and k3-am62x-sk-hdmi-audio.dtbo
- Misc fixups for AM62 Beagleplay, verdin-am62 boards
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmUwEtwQHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW49ksB/0VJu4sHb04DIJUiFWjDX72ecj7vFzU0xnI
tKDTpOgsmyYR9NXTzpHVzJz7OvFNXSC3J2AiXHJEuoLFe6T4nnRXf2iatxu9Q5fV
b8TteojLDWuoGuOIX0SxRwGfBcEvbyn2YZVjXENWPJ/gXh2IdkORaydV6IDAeVZp
0l2AoWR9J6hIZOGfEyB3r/q7kQ4y7j6vT8ePXT4jRs3hWUv0S8AHr6F7ogd6CCjU
+OMFKarnx/NIm08dQhgFo8tvuUe2Ip3K/DEldaF5DMK0qjSPEZdablRdzjjYQtcG
Kn9yGuewYh48wfAc7hHnJ1vXXi4iQWnS+x8+HtQm0OeLERElx52v
=MsFo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uJDk
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.7
New features across K3 SoCs:
- Watchdog and ESM nodes for J7xx
- DMA node for Camera interface (CSI) for J7xx
- C7x DSP and R5F rproc support for J7xx/AM68/AM69
AM68:
- USB and PCIe support
AM64:
- IO expander support
- GPIO LED, I2C device supplies for am64-tqma64xxl-mbax4xxl
- RTC IRQ pin update for am64 phycore
AM62A:
- TPS6593 PMIC and mcasp audio support
Misc:
- bootph-* tag addition for AM64 and AM62
- iw416 based bluetooth support on verdin-am62
- IO Expander addition for AM64 and AM65 boards
Fixes:
- Convert DMSS/NAVSS to simple-bus compatible to squelch dtbs_check
warnings
- Minor indentation fixes
- Specify base dtb for k3-j721s2-evm-gesi.dtbo and k3-am62x-sk-hdmi-audio.dtbo
- Misc fixups for AM62 Beagleplay, verdin-am62 boards
* tag 'ti-k3-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits)
arm64: dts: ti: k3-j712s2-mcu: Add the mcu domain watchdog instances
arm64: dts: ti: k3-j721s2-main: Add the main domain watchdog instances
arm64: dts: ti: k3-j784s4-mcu: Add the mcu domain watchdog instances
arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances
arm64: dts: ti: k3-j7200: Add MCU domain ESM instance
arm64: dts: ti: k3-j784s4: Add ESM instances
arm64: dts: ti: k3-j721s2: Add ESM instances
arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX
arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX
arm64: dts: ti: k3-*: Convert NAVSS to simple-bus
arm64: dts: ti: k3-*: Convert DMSS to simple-bus
arm64: dts: ti: Fix HDMI Audio overlay in Makefile
arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A
arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC
arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz
arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
arm64: dts: ti: k3-am62a-main: Add nodes for McASP
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers
...
Link: https://lore.kernel.org/r/f05c98b6-6274-4544-8fcd-0332c39244c9@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
